XFP Source?
Oct 17, 2009I'm under the gun, and looking for a source for 40km and 80km XFPs (e.g. Finisar, Agilestar), who keeps them in stock and at a good price. I prefer to work with vendors who are subject to US law.
View 1 RepliesI'm under the gun, and looking for a source for 40km and 80km XFPs (e.g. Finisar, Agilestar), who keeps them in stock and at a good price. I prefer to work with vendors who are subject to US law.
View 1 RepliesI am trying to install the kernel source.
I have downloaded kernel-2.6.20-1.2948.fc6.src.rpm
I am using fedora 6 64bit.
here are my current kernels:
kernel-headers-2.6.20-1.2948.fc6
kernel-devel-2.6.20-1.2944.fc6
yum-kernel-module-1.0.3-1.fc6
kernel-2.6.20-1.2944.fc6
kernel-devel-2.6.20-1.2948.fc6
kernel-2.6.20-1.2948.fc6
here is what I seen when I installed kernel-2.6.20-1.2948.fc6.src.rpm
rpm -ivh kernel-2.6.20-1.2948.fc6.src.rpm
1:kernel warning: user brewbuilder does not exist - using root
warning: group brewbuilder does not exist - using root
warning: user brewbuilder does not exist - using root
########################################### [100%]
warning: user brewbuilder does not exist - using root
warning: group brewbuilder does not exist - using root
then when I ran:
rpmbuild -bp --target=$(uname -m) /usr/src/redhat/SPECS/kernel-2.6.spec
I seen this error:
+ Arch=x86_64
+ make ARCH=x86_64 nonint_oldconfig
In file included from /usr/include/sys/socket.h:35,
from /usr/include/netinet/in.h:24,
from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/bits/socket.h:310:24: error: asm/socket.h: No such file or directory
make[1]: *** [scripts/basic/fixdep] Error 1
make: *** [scripts_basic] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.93770 (%prep)
I need to have this installed to get a app installed etc...
suggestions or ideas?
thanks
Does xensource support more than 3 ips per domU?
View 2 Replies View RelatedAnybody have a good source for APC cabinets? I need a full truck-load of AR3100.
View 12 Replies View RelatedI bought two Dell R200 because they was extremely cheap.
My target is Open Source SAN with active/passive setup.
Now i was wondering what RAID-level I should go for.
I will use 1TB SATA-II disks.
1) RAID-1 in both servers and mirror each other with DRBD.
With this setup i have like double RAID-1 so i lose lots of disk space.
4 disks -> 1TB
2) No-raid at all and i will mirror data with DRBD.
4 disks -> 2TB
Then there is change to go for RAID-5. Theres enough space to put third disk in that case
3) RAID-5 in both servers. Mirrors data with DRBD.
6 disks -> 2TB but more performance.
But in every setup i lose space more then i would like to.
Actually i dont need space more then 1TB, but i would like to get best possible redundancy and most space available i could.
Also need to remember that those servers does not support hot-plug HDs so in case there is disk-failure i need to be able to shutdown one server and iSCSI should still be up and running.
Of course theres change to make it active/active.
I was thinking that if I go for the RAID-5 I will make LVM-VG on both nodes (san-vg1 and san-vg2) and use it 50/50.
In case of fail both VG's will be used from working node.
Im going to use Debian Lenny I guess..
I was looking for OpenFiler because of the GUI, but im familiar with Debian and have always done everything from cmd.
Running ubuntu server 6 if I apt-get php5 the version I get is 5.1.2.
Now the latest version on the php.net site is 5.2.5.
Does it really make much of a difference if I'm slightly below current? What are your thoughts please?
I know if I go compiling from source php and mysql are difficult to get working together which is why I like the apt-get method.
Website source is a great hosting company! They host up to 8 domains for $107.00.. They have great customer service and they offer 24 hours online support.
View 6 Replies View Relatedan A/V kind of solution, that allows me to use my own custom signatures, etc. just wondered if such a thing existed.
View 2 Replies View Relateddoes anybody have a script that can veiw the php source code before it runs to the server of an external site
View 1 Replies View RelatedI am looking for a opensource ftp client so I don't have to license a million computers with it. Any body have any good ones they can list?
View 14 Replies View RelatedI have installed dovecot from source some time ago. Now i require it to be thoroughly removed. regarding the procedure for a proper uninstall.
View 5 Replies View RelatedNatcoweb offers Commitment to Open source - can you explain to me what it means?
Can't understand that statement.
Some JSP pages display the source code. Some work and some don't even after recompiling apache with tomcat module and restarting jsp.
-rw-r--r-- 1 user user 6.5K Mar 10 17:18 index.jsp
Not sure where the jsp logs are, but there were no errors in the domlogs.
if anyone replaces a commercial program with their own open source as for eg what Friendster did. For Netscaler, any open source development that are close are similar to it?
View 0 Replies View RelatedWhich PHP encoder do you all suggest out of Ioncube and Source Guardian? Or possibly another if you know a good one. I checked out Zend Encoder, but its expensive as hell.
Currently I'm thinking about Ioncube. I know the majority of web hosts have ioncube loader installed, but I'm not sure about source guardian.
when I compile lighttpd from source -- I cannot seem to enable/disable the modules I need.
I have tried
./configure --without-status --with-rewrite
and also
./configure --disable-status --enable-rewrite
but no luck. The rewrite flag may not work since the configure script may or may not detect the pcre library, but status should be disabled.
After the configure script is complete, I get a listing of the enabled/disabled modules that are in the build and nothing new has been changed.
if a program is compiled and installed (configure -> make -> make install) with a --prefix pointing to an empty subfolder, then would removing it be just a simple delete the folder and it's contents action ($rm -fr subfolder/).
Ok so lets say I was to install php from source with a complile prefix flag set to /usr/local/php
Then all the binaries and configuration files are set within the directory (php/conf , php/bin). If I want to delete the php installation then I would just remove the /usr/local/php directory, No?
Thinking very seriously about revolutionizing the ISP market, starting with WiMax-based service in the Texas hill country, as I'm tired of the basic monopoly outside of town and the near-monopoly in town for halfway decent access. Anyhow, I plan to get Cogent FastE for the main backbone, however I know I need something else in case some spat starts between Cogent and someone else (Level3, France Telecom, Telia). Internap is in Austin I know, but Cogent has a POP in San Antonio which is much closer to where I'm going to deploy the network. Any options in the Internap price range for maybe 20 Mbit to start? Yeah, I know that the price of the "backup" connection may be more than that of the main line, but if people want their WoWwebetc. I want to live up to that promise.
Thanks in advance. If I gotta use Internap I'll do that, but again that means setting up a link in the opposite direction to what I'm thinking right now. The ultimate answer would be something relatively inexpensive (sub-$100 per Mbit with 20 Mbit commit) relatively close to one of Cogent's San Antonio data centers. Cogen't bandwidth deals are awesome, but with one peering argument per year or so a backup seems needed.
I have been getting multiple emails a month for a service which I have never purchased.
The information they have harvested off the internet (since I know where they found it) and have obtained solely for use in attempting to charge me is-
Invoiced To
Steven Crothers
12345 Main St.,
Detroit, MI, 48021
United States
Which is completely obvious that it is fake.
I respond to EVERY invoice with a cancelation request, yet the tickets that get opened in the WHMCS billing panel get deleted a day later, however I have tickets in there that I have opened by use of the ticket insertion form that have stayed - none of which were ever answered.
The latest ticket information-
Department:Billing And Invoicing
Date:09/10/2009 10:05
Subject:The Second Time...
Status:Open
Urgency:Medium
It's still open without a reply.
I have put tickets into their Kayako system as well (They have two support systems, I would assume its due to poor management of their company). One of which was answered, with simply the output of `uname -a` on some server somewhere with my name as the hostname.
I than have attempted to reach anyone via livechat at [url]they constantly tell me that I am not allowed to speak to anyone until I pay my bills up to current (now remember, I have NEVER ordered anything from them, they don't even have valid information on file). Just tonight I demanded that I required to speak to a billing agent or I would be pressing harrasment charges against them for the 23 emails I have recieved in 3 months from them trying to extort money from me. They than banned me from their LiveChat software.
I have no idea what to do at this point, they are just sending me bills every month. I mark it as spam, but its frustrating to have a company trying to extort money from me on a very regular basis.
We have a large number of the 2U SC832 and SC833 cases from Supermicro that have been real workhorses over the years and some have had various motherboards in them as time went by. All of them are 5-7 years old and we would like to keep using them, but are concerned about the fans in the power supplies getting worn out and failing. Anyone have the source for good high quality fans that would work in these 400 and 550 watt single power supplies?
Anyone have an idea of what the normal life of one of these power fans is? All of them have been in good datacenters from there first use.
Since I know there are a lot of Supermicro users on this forum I figured this would be the best place to ask.
What is the best open source web-based interface for system administration for Unix?
I found one named Webmin but I'm not sure if this is a stable project.
My server running and update CentOS 4.4. In the last hours lot of spam are being send form my server to the world. I'm unable to locate the source.
Sendmail is define to relay localhost, and it seems that the source is local!
It seem that all the email are send from apache@mydomain.com to user@mydomain.com
Sendmail is configure to accept for local delivery mail for domain mydomain.com
Here is trace of spam session:
Quote:
May 3 14:39:51 active sendmail[17696]: NOQUEUE: connect from mydomain.com [127.0.0.1]
May 3 14:39:51 active sendmail[17696]: AUTH: available mech=CRAM-MD5 DIGEST-MD5 PLAIN ANONYMOUS LOGIN, allowed mech=EXTERNAL GSSAPI KERBEROS_V4 DIGEST-MD5 CRAM-MD5
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: Milter: no active filter
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 220 mydomain.com ESMTP Sendmail 8.13.1/8.12.8; Thu, 3 May 2007 14:39:51 +0300
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: <-- EHLO mydomain.com
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-mydomain.com Hello mydomain.com [127.0.0.1], pleased to meet you
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-ENHANCEDSTATUSCODES
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-PIPELINING
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-8BITMIME
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-SIZE
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-DSN
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-ETRN
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-AUTH DIGEST-MD5 CRAM-MD5
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250-DELIVERBY
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250 HELP
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: <-- MAIL From:<apache@mydomain.com> SIZE=133 AUTH=apache@mydomain.com
May 3 14:39:51 active sendmail[17696]: ruleset=trust_auth, arg1=apache@mydomain.com, relay=mydomain.com [127.0.0.1], reject=550 5.7.1 <apache@mydomain.com>... not authenticated
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250 2.1.0 <apache@mydomain.com>... Sender ok
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: <-- RCPT To:<reports@mydomain.com>
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250 2.1.5 <reports@mydomain.com>... Recipient ok
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: <-- DATA
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 354 Enter mail, end with "." on a line by itself
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: from=<apache@mydomain.com>, size=410, class=0, nrcpts=1, msgid=<200705031139.l43BdpDW017695@mydomain.com>, proto=ESMTP, daemon=MTA, relay=mydomain.com [127.0.0.1]
May 3 14:39:51 active sendmail[17696]: l43Bdpg2017696: --- 250 2.0.0 l43Bdpg2017696 Message accepted for delivery
May 3 14:39:51 active sendmail[17696]: l43Bdpg3017696: <-- QUIT
May 3 14:39:51 active sendmail[17696]: l43Bdpg3017696: --- 221 2.0.0 mydomain.com closing connection
It seems the spam message BCC contain a lot of victims address, that not from mydomain.
Is some one connect form outside and spoof 127.0.0.1 ?
If it local process, ho do I locate it?
I scan /tmp and my web server root for suspicious file and didn't find nothing!
how many players you would estimate the following server could handle running Counter-Strike Source dedicated Server?
Dell PowerEdge 1550 1U Rackmount Server
1Ghz P3 Processor -
1GB RAM
2X36Gb U160 SCSI Hard Drives in RAID1 for redundancy
Windows 2000 server
Network connectivity is 100mbit in a London DC.
Of course its not possible to give a 100% accurate figure however i would like a rough estimate prior to me purchasing this machine.
Does anyone know of a source for power cords in Toronto with a
C19 connector on the output end?
The preferred configuration is
input: NEMA 5-15P (regular 15 amp plug)
output: IEC C19
The C19 looks like this:
-- --
--
We are taking server from US and we have to send 5000USD/Mo. to US.
Our CA says that we have to detuct TDS (Tax Deducted at Source) amount, Is this necessary.
What open source in linux do you know for anti-spam & anti-virus? Is there existed a benchmark?
View 1 Replies View RelatedI'm doing a GreenComputing project.
About CAD fluid modelling;
CD-adapco - commercial
[url]
StAR-CCM
STAR-CD
STAR-CAD Series
Flomerics - commercial
[url]
Fluent - commercial
[url]
Numeca - commercial
[url]
Phoenics - commercial
[url]
Are there equivalent on Open Source?
Is there any Open source backup software available for web hosting companies? I have a few shared hosting servers and a few dedicated servers and I want to setup a backup server for the backup of the data and config files of the servers. Please give me the names of some good open source backup software.
View 11 Replies View RelatedDoes anybody know of any open source Anti Spam gateway for mail servers? I have used MailCleaner and know how it works. Is there any other available?
View 3 Replies View RelatedI own a small tech firm, mostly in business to support the customer with basic repair and upgrade. In recent year, more and more of my SMB customer ask me about the hosting service of the CRM or CMS.
The question I have is, although the open source tool, such as SugarCRM and Drupal is free of charge, but will it be free for some one like me to offer the service to my customer, either the same or customerize it a little bit.
And if it can be done, what kind of precaution I need to take, so I will not be involved in the copy right battle later on.