I have just taken hosting from godaddy. i have taken dedicated website hosting. But my ftp are working in my office filezilla and not at home. Its giving 530 error, unknown ip address.
2.6.18-164.2.1.el5 #1 SMP Wed Sep 30 12:55:19 EDT 2009 i686 i686 i386 GNU/Linux and after reboot the server when i restart the firewall iptables give me this error
Iptables have problem on all vps. when we started csf firewall, we have got this error on all vps:
iptables: Unknown error 18446744073709551615
and then iptables blocked all connection. i know that error is for xt_tcpudp module. please tell me how to load this module on all vps? also i have a full access to node server.
My issue is that my websites I have hosted there just come and go. They will be accessible for a few minutes, then return "unknown host" errors for a while, and then come back like it never happened.
I am amusiming this is a dns issue, but I am not really sure where to start. My dns template looks ok, but past that I am lost.
We are hosting a Git server (using Gitolite v3). Our users are interacting with git over an https connection. Here's the relevant versions of software:
Apache 2.4.6 OpenSSL 1.0.1e-fips Red Hat Enterprise Linux Server release 6.5 (Santiago) git version 1.8.5.3 (Server Side) git version 1.9.2.msysgit.0 (Client Side)
Users sometimes encounter an SSL error message when attempting to run git commands that talk to the server (e.g. clone, push, pull). The error message is "Unknown SSL protocol error in connection to servername:443". Users can usually simply try the command again, and it will then work successfully.
I've managed to capture a bit more output by setting the GIT_CURL_VERBOSE flag, see output below.
Code:
* Couldn't find host servername in the _netrc file; using defaults * Adding handle: conn: 0x2587c40 * Adding handle: send: 0 * Adding handle: recv: 0 * Curl_addHandleToPipeline: length: 1
I have set up my Virtual Private Server and uploaded all my site's files to /var/www folder. Before that, there was an old simple 'index.html' file
Code: <html> <head> <title>INDEX</title> </head> <body> <h1>IT WORKS!!!!</h1> </body> </html> and when I typed the address www.mydomain.com it displayed correctly. Then I deleted this html and uploaded my files through FTP and now the browser says :
Code: Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
Fatal error: Unknown: Failed opening required '/var/www/index.php' (include_path='.:/usr/share/php:/usr/share/pear') in Unknown on line 0
I've been with my Strato VServer and it installed Plesk on Linux a big problem.
I coming no longer in the Plesk Dashboard and the following code appears:
Syntax error or access violation: 1286 Unknown table engine 'InnoDB'
Here are the contents of my my.cnf
# # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports.
I am using Parallels Plesk Panel v. 11.0.9 on a V-Server provided by Strato (Germany), the OS is Ubuntu 10.04 LTS. Established and running under Plesk is a MySQL-Database, administered via Plesk by PHPMyAdmin 3.5.8.1. PHPMyAdmin offers the following information:
Datenbank-Server
Server: Localhost via UNIX socket Software: MySQL Software-Version: 5.1.41-3ubuntu12.10 - (Ubuntu) Protokoll-Version: 10 Benutzer: admin@localhost Server Zeichensatz: UTF-8 Unicode (utf8) Webserver
sw-cp-server Datenbank-Client Version: libmysql - mysqlnd 5.0.8-dev - 20102224 - $Id: 731e5b87ba42146a687c29995d2dfd8b4e40b325 $ PHP-Erweiterung: mysql Click to expand...
and once in a while, i check all the root folders to find a folder that holds 40GB of folder in a folder in a folder... (i never get to the actual files)
The thing is that my sysadmin told me that he get filesize and eta when downloading a file from my server while all of my user and myself get unknown flesize and no eta. got Web Server apache2handler centos 5.1 64bit
I've bought a basic unmanaged VPS, purely to learn things from it. The best way to learn imo is to hammer the hell out of things, break it, then try to fix it. Anyway, I think I'm part way there, pretty sure I've broken something
When I start the consoleSSH I get this at the top:
Buy Viagra, Cialis, Levitra, Propecia, Champix, Tamiflu, Xenical, Reductil, Intrinsa, <br> from The Best Online Pharmacy! FDA Approved. Low pricing, discounts, <br> flawless customer support. New discounts and special offers ! <br> </a> [url] --------------------------------------------
Eventhough, I did not setup any signatures. Plesk server with spamguardian running.
my friend has an un-managed VPS plan in kloxo-hypervm mode
yesterday the stats showed in hypervm as the space was over used, so I personally deleted the processed stats which cleared around 20gb space, again today the space is totally consumed, I don't know why its happening and have no clue where are the other locations where the space could have been consumed i.e similar to location of logs or any other specs which could have been consuming space
unknown space consumption - very high no idea how!
its actually an image hosting site and I noted that not many pics and not much space was consumed in the pics uploaded in the last 24hrs but this really puzzles and troubles me as I am currently tracking my friend's VPS, please help me sort this out problem and keep my head high before my friend
i think it's an apache problem, but whenever i download something from my server via http, i get unknown file size when downloading. it's not a big problem, but it's kind of annoying.
When I install APF 0.9.6 firewall on redhat enterprise linux 5 I get the following error
Starting APF:iptables v1.3.5: Unknown arg `--set-tos' Try `iptables -h' or 'iptables --help' for more information. iptables v1.3.5: Unknown arg `--set-tos' Try `iptables -h' or 'iptables --help' for more information. [ OK ]
I'm using the same settings I've been using for years with no errors on RHEL3, but RHEL5 is new to me.
Anyone else run into this issue with APF firewall and RHEL5?
For a bit now, my site has been having probems with a script constantly being added to my index.php and header.php files, despite how many times I remove it.
Lately our VPS has needed to be restarted frequently (1-2x daily for the past 5 or so days).
I have pulled our eror_log file and pasted below the last several days. I am hoping someone can take a look at it and point me in the right direction.
Because of limitations, I cannot post anything with urls, but the two errors that have been occuring most frequently are below
Code: [Mon Mar 3 07:37:22 2008] [error] (12)Cannot allocate memory: fork: Unable to fork new process [Mon Mar 3 07:37:32 2008] [error] (12)Cannot allocate memory: fork: Unable to fork new process [Mon Mar 3 07:37:42 2008] [error] (12)Cannot allocate memory: fork: Unable to fork new process [Mon Mar 3 07:37:52 2008] [error] (12)Cannot allocate memory: fork: Unable to fork new process [Mon Mar 3 07:38:02 2008] [error] (12)Cannot allocate memory: fork: Unable to fork new process [Mon Mar 3 07:38:12 2008] [error] (12)Cannot allocate memory: fork: Unable to fork new process [Wed Mar 5 07:44:02 2008] [error] Bad pid (15524) in scoreboard slot 44 [Wed Mar 5 07:44:02 2008] [error] Bad pid (3750) in scoreboard slot 46 [Wed Mar 5 07:44:02 2008] [error] Bad pid (3751) in scoreboard slot 47
I came across a problematic situation today. Our client pmb.com.my has complained that their domain, when accessed from search engines will go to another site, not theirs. So, perhaps you guys can try this out.
1. Type the URL on the browser directly: [url] You'll get the real site.
2. Try searching for "pmb malaysia" on Google: [url]
3. You should see a normal listing for the site as the 1st result. Try clicking that link.
4. In our checks, it will go to a landing page (black bankground), and will redirect to an adult site.
5. You get this landing page too when you click the link to the site in step 1.
Appreciate if more people can try this out and post your findings here. I've contacted the RZ (site hosted there), and they said it is an issue with Google's cache. Not sure I buy that.
I have the following problem: When i try to restart the nameserver service i get the following error:
# service named restart Stopping named: [ OK ] Starting named: Error in named configuration: /etc/named.conf:87: unknown option 'e' /etc/named.conf:120: unexpected end of input [FAILED] my named.conf as follows:
options { /* make named use port 53 for the source of all queries, to allow * firewalls to block all ports except 53: */ query-source port 53;
// Put files that named is allowed to write in the data/ directory: directory "/var/named"; // the default dump-file "data/cache_dump.db"; statistics-file "data/named_stats.txt"; /* memstatistics-file "data/named_mem_stats.txt"; */ };
logging { /* If you want to enable debugging, eg. using the 'rndc trace' command, * named will try to write the 'named.run' file in the $directory (/var/named). * By default, SELinux policy does not allow named to modify the /var/named directory, * so put the default debug log file in data/ : */ channel default_debug { file "data/named.run"; severity dynamic; }; };
// All BIND 9 zones are in a "view", which allow different zones to be served // to different types of client addresses, and for options to be set for groups // of zones. // // By default, if named.conf contains no "view" clauses, all zones are in the // "default" view, which matches all clients. // // If named.conf contains any "view" clause, then all zones MUST be in a view; // so it is recommended to start off using views to avoid having to restructure // your configuration files in the future.
view "localhost_resolver" { /* This view sets up named to be a localhost resolver ( caching only nameserver ). * If all you want is a caching-only nameserver, then you need only define this view: */ match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes;
zone "." IN { type hint; file "/var/named/named.ca"; };
// include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients.
// These are your "authoritativ zone "smpl.splinteredmedia.net" { type master; file "/var/named/smpl.splinteredmedia.net.db"; };
e" internal zones, and would probably // also be included in the "localhost_resolver" view above : };
view "external" { /* This view will contain zones you want to serve only to "external" clients * that have addresses that are not on your directly attached LAN interface subnets: */
recursion no; // you'd probably want to deny recursion to external clients, so you don't // end up providing free DNS service to all takers
// all views must contain the root hints zone: zone "." IN { type hint; file "/var/named/named.ca"; };
// These are your "authoritative" external zones, and would probably // contain entries for just your web and mail servers:
// BEGIN external zone entries
};
z zone "smpl.splinteredmedia.net" { type master; file "/var/named/smpl.splinteredmedia.net.db"; };
