i have a dedicated server with cpanel and when trying to addd any accounts i get the message dns zone already exists but when i go to edit a dns zone to check i am getting the message below
Unable to read data from /dev/urandom (No such file or directory).
Every out bound email message fails and stays in the queue. The mail log shows this error.
qmail: 1432283802.380653 delivery 27: deferral: Unable_to_read_control_files._(#4.3.0)/
A second problem, also qmail is that I can't send to the server using TLS on the submission port, only if I do plain text. But the first problem is bigger because we can't send at all.
This is a new plesk installation and it has never worked.
I can not log into to plesk right now. It's display message " Unable to read Control Panel configuration file: date_default_timezone_get() [function.date-default-timezone-get]: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_ timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier.We selected 'Asia/Krasnoyarsk' for '7.0/no DST' instead".
View 1 Replies View RelatedI'm unable to access my plesk control panel .its giving this error "Unable to read Control Panel configuration file";tried all available solution for permissions but the problem remains.
View 3 Replies View Relatedi run one bad command :-(
chmod -R 644 /
and this command changes all permision in root server
have any away for fixed all permision in centos?
because all site take error
i use of cpanel
This is applies to both Horde and roundcube webmail client software;
Using Plesk 11.5.30 with Horde 5.1.5 or roundcube 0.9.5 on CentOS Linux release 6.5 (Final).
We have seen this behavior occur on multiple servers.
Clients experienced slow to no response after executing a search, which eventually results in a failed to communicate with the server-error in the webmail client.
The Apache server log shows script time-out errors when searching larger mailboxes (i.e. larger than 950 MB), this does not happen on smaller mailboxes.
We have seen errors like the following in the Apache server error log with Horde (personal data like IP-address and domain name are x'ed out):
[Thu Jun 19 14:55:06 2014] [warn] [client xx.xxx.xxx.xxx] mod_fcgid: read data timeout in 45 seconds, referer: http://webmail.xxxxxxx.com/imp/dynamic.php?page=mailbox
[Thu Jun 19 14:55:06 2014] [error] [client xx.xxx.xxx.xxx] Premature end of script headers: ajax.php, referer: http://webmail.xxxxxxx.com/imp/dynamic.php?page=mailbox
And with Roundcube:
[Tue Jun 17 13:02:04 2014] [warn] [client xx.xxx.xxx.xxx] mod_fcgid: read data timeout in 45 seconds, referer: https://webmail.xxxxxxxxxxx.com/?_t...d=19445&_mbox=INBOX&_caps=pdf=0,flash=1,tif=0
[Tue Jun 17 13:02:04 2014] [error] [client xx.xxx.xxx.xxx] Premature end of script headers: index.php, referer: https://webmail.xxxxxxxxxxx.com/?_t...d=19445&_mbox=INBOX&_caps=pdf=0,flash=1,tif=0
Steps to reproduce:
- use a large mailbox (950 MB or higher)
- login to the webmail (Horde or roundcube)
- do a search in the search field on the top right
- the time-out error should appear in the server Apache error log (after at least 45 seconds)
This seems like an inefficiency or bug in the search query that searches the user's mailbox. Is there any other way we can prevent this issue and the error messages?
I get a notification email...
Code: Unable to update . An error occurred while processing your key. You can try updating it later.
So I log into Plesk license management and click 'Retrieve Keys'. The following message is displayed:
Code:
Unable to connect to license server [URL] ....
cURL error description: transfer closed with outstanding read data remaining(18)
There are posts about the curl error on other sites, but they all seem to be from developers and the solution is to program cUrl differently, so as a Plesk user this option obviously isn't open to me.
CWIE just walked out about 30 minutes ago. Cogent is off, and all the techs are laid off apparently.
[url]
make sure you have data backups!
In plesk 11 with os windows 2012 when i try to create any new subscription i get following error:
Error: Unable to update domain data: Execute websrvmng --add-domain "--domain-name=testDomain123.com" failed with error code 1:
what should i do? this problem happen suddenly without any changes by us.
We have been working on a site for a while, couple of days ago I copied the source from the server - as there are few people making the changes to it - to get a fresh copy.
Yesterday I was blasted by my client that I have deleted files on the server and it had caused the site to go in disarray and they had to upload everything again.
I didn't delete anything, only copied, and after some arguments (naturally I am not happy with the allegation put on me) I was able to get the FTP log, but I don't really know how to read it, I am hoping that someone here would know and be able to assist:
HTML4Strict Code:
Tue Mar 04 16:49:29 2008 0 xx.xx.xx.xx 9365 /home/APP_NAME/public_html/user/add_room.php a _ i r xxxx ftp 1 * cTue Mar 04 18:20:02 2008 0 xx.xx.xx.xx 3909 /home/APP_NAME/public_html/About.php a _ o r xxxx ftp 1 * cTue Mar 04 18:20:04 2008 0 xx.xx.xx.xx 6046 /home/APP_NAME/public_html/affiliate-join.html a _ o r xxxx ftp 1 * cTue Mar 04 18:20:08 2008 0 xx.xx.xx.xx 6158 /home/APP_NAME/public_html/affiliate-join.php a _ o r xxxx ftp 1 * c
I have replaced the IP, application name with x.
I am guessing that *c means copy, but I don't want to make fool of myself when I confront them with this. Assuming that *c is copy what would be the command for delete?
root@server [/backup/cpbackup/daily]# chmod 1777 /tmp
chmod: changing permissions of `/tmp': Read-only file system
root@server [/backup/cpbackup/daily]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 271G 135G 123G 53% /
/dev/sda1 99M 58M 36M 62% /boot
none 2.0G 0 2.0G 0% /dev/shm
/dev/sdb1 135G 80G 49G 63% /backup
/usr/tmpDSK 4.9G 64M 4.5G 2% /tmp
/tmp 4.9G 64M 4.5G 2% /var/tmp ....
Does anyone know what this error means in my error_log:
[Tue Oct 27 14:00:17 2009] [error] [client 90.152.40.73] mod_mime_magic: can't read `/var/www/vhosts/domain.com/subdomains/bugzilla/httpdocs/report.cgi', referer: [url]
I just hired my first dedicated server and I don't get why but it is like if it is not reading my htaccess files for mod_rewrite.
View 13 Replies View Relatedr 32 bit systems can not read more than 4 gb ram ??
r any thing in kernel to do fix it
I have a server with pacificrack. When I see my website it says "Read-Only File system" and my SSH dies with read-only file system errors.
It happens once per month, and the bad thing is I'm sleeping when it happens so I don't know my server is in this state.
Even though support fixes the problem within 15minutes of my support ticket, my server is down for hours because I don't know its down to then raise a ticket. I asked support why it happens and they never tell me... just tell me to read the logs but I'm not technical enough to understand linux logs etc.
Server is centos.
I received email from my cpanel server as follow:
IMPORTANT: Do not ignore this email.
This is cPanel stats runner on server.domain.com! While processing the log files for user xxxx, the cpu has been maxed out for more than a 6 hour period. The current load/uptime line on the server at the time of this email is 18:46:25 up 59 days, 13:16, 0 users, load average: 2.24, 2.23, 2.25
You should check the server to see why the load is so high and take
steps to lower the load. If you want stats to continue to run even with a high load
So what does this mean? and how can i check out this? how to reduce the cpu usage? Where to see the current usage?
Somehow the filesystem on my server turned read-only. The databases would not connect. When I rebooted the box it would not come up.
Support had to run FSCK. Even after, the databases had to be repaired using the CPanel tool. Things seem to be ok now, however:
1. What could have caused this to happen? Software or hardware failure?
2. I get these notifications, should I be worried?
WARNING: Kernel Errors Present
EXT3-fs error (device sda2): e...: 1 Time(s)
About a month ago, I searched desperately for days to host my social networking site and file hosting site. Thankfully I found Wiredtree(WT) to be suitable for my budget. I signed with them with their entry plan of $44.10 and was happy with their service. The customer support was extremely helpful and they did everything to make my life better.
Nevertheless my project didn't turn up as expected and I decided to close the hosting.
Just a day before the end of one month of hosting, I wrote to them asking to close the account and also congratulating their service I also told them I would look forward to host with them in future and would recommend them. I expected a warm termination without any hassle. But i got a mail quoting their TOS (which says I should inform them 7 days in advance) and asking me to pay up another month's hosting fee before I can close the account. Along with it was a note from the staff to use the client portal to contact Billing Department directly to close the account (hmmm would they ask me to contact sales department directly if I tell me I want to add new server?). What hurt me was not the extra $44.10 which I will pay them anyway, but what they could have done was to understand my genuine case(first time customer). Tell me, how many of us read the TOS really. I requested them not to charge me, but got same cold response asking me to adhere to the TOS.
On the other hand my experience with other host (PM me if you want to know who) was one of awe and amazement. I wrote asking them the price I should pay to have more bandwidth. To my surprise I got extra bandwidth absolutely free though it wasn't mentioned such things in their TOS.
Well I learned a lesson today not to forget the importance of TOS and i am sure new webmasters will find this post useful.
This thread is not against the WT service. But a warning to new webmasters who might miss the fine print.
I got 2 questions:
Are deleted emails kept on the server?
2nd, how do I view deleted emails from different accounts?
I have root access to my box so I can use SSH etc to get in...
I have brand new server with CentOS 5.3 and latest CentOS kernel (2.6.18-128.1.10.el5PAE).
I have brand new HDDs with no errors (HDDs have only 1000 power-on-hours, server CPU temperature is normal - between 35-42 C). My server went read-only without any reason. I need to fsck main / partition (/home is separated) and it cleaned journal, then server became online.
After 2 weeks it happens again - I did again fsck on / partition and it recovered journal as before. I decided to ask Data Center to replace RAID-1 card and memory - they did it. After 3 weeks server went read-only again.
I ssh into server and saw that kswapd0 process is using 100% cpu and load is over 170.
After fsck it recovered journal on / and server is again available.
I had a linux server (CentOs 5, mysql5, php5, directadmin). I had problems with apache few days ago, that's why i hire sys. admin who tweak the system (install the PAE kernel), and some more configurations, and during last 7-8 days server work w/o any downtime (before this server had 1-2 downtimes per day-> OOM killer.)
Now i had only ssh access (emails, directadmin access - give "wrong password" answer). As told my sys.admin It became read only system.
I cann't even reboot system
Quote:
[root@server sa]# reboot
reboot: /usr/local/lib/libpng12.so.0: no version information available (required by /usr/lib/libcairo.so.2)
such few commands work, the most commands that i know don't work
Quote:
[root@server ~]# ls -la
ls: error while loading shared libraries: libacl.so.1: cannot open shared object file: No such file or directory
I just thought I would riase an issue you with you about the following host:
hostvector.com
hostmds.com
The reason:
I have received a number of e-mails over the last 2weeks that look like they are from my bank asking me to log-in and update my security information. I no my bank doe's not ever do this so I contacted them. When sending on the mail to them, they where able to trace the e-mail and it took them back to the address listed above using the e-mail account psychic@sabre.hostvector.com.
So before you hand over your bank account details to them I highly recommend that think twice.
I'd love to contact the domain registrars of the recipient spammers who are barraging me with the latest "google riches", or "ebay success" sales pitch emails, but I lack the knowledge of how to reveal the email headers and interpret them.
Is there a particular email client program that would allow me to view all parts of the email ? Maybe I'm using the wrong client (outlook), that would not allow me to view the more technical parts of the email, but but I don't know.
If I go ahead and click on their "unsub me" links at their bottom, that's their tricky way of finding out what emails are active and possibly make it worse for me. I know that it's illegal to send me email that I didn't opt into, in the first place, even if they do provide the unsubscribe link at the bottom, with the usual "Icann" spam disclaimer that they include.
I have a server with 2 hard drives.
1. I configured the onboard Raid 1, both as Volume0
I installed CentOS successfully. So I tested the RAID to see if the mirror really works
2. I took out hddA and boot hddB as single drive. it work!
3. Then I took out hddB and boot hddA as single drive. it work!
4. Then I plug back hddA & hddB back together & boot it up
It gives me many error screen, I had to login as repair screen with root password. It says everything is read-only. So I try to remount but it fails
#e2fsck -y /dev/sda1
#mount -t ext2 -o rw,remount /dev/sda1 /
#mount -n -o remount ext2 /dev/sda1 /
#mount -o remount,rw /
None above works. I wonder if I am not suppose to do that way the first place?