I have 5 servers spread out in different locations running Fedora Core, Webmin, and OpenVPN.
My most recent one I signed up with on here and for 2 weeks I have been doing various things to speed it up such as remove ipv6, change the dns servers, etc. and rebooting after making such changes.
Things were working properly and the server was rebooted last about 3 days ago after installing OpenVPN and Webmin. Yesterday afternoon the server suddenly stopped responding and dropped its VPN connections. I created a ticket with my hosts support center and they told me that the network module was uninstalled.
Is this possible? I have NEVER heard of any software uninstalling a network module and even more so suddenly stopping the service to uninstall it without a reboot?
Did my host just try to screw me to get a reimage fee on their cheap server?
how to fix the issue of subdomain suddenly not working. I check httpd conf the entries were there. I did run /scripts/rebuildhttpdconf but still not working. I also roce update cpanel still not workin
first month the server well adn take backup with out any problem to ma accounts then the disk space usage ( accounts + daily backups + weekly backups ) = 56 %
now from 2 weeks my server has not take any backup why?
i've buy a domain name form a hosting company and host it at another company...
everything is fine at first...
however something weird happened when i have accidently agreed on some suggestion during ftp upload (i can't remember what is suggested while upload, i suppose to click NO but...). then my site turn to the cPanel page.
when i try check at the domain name server, the setting is correct.
however, the addon domain in the hosting company is disappeared. all the files are still in the directory, but the domain is no more appear under the added on domain list.
I tried to add the domain again, however it shows "Error from park wrapper:..." i've also checked the park domain, my domain is not in the list too...
i have a VPS on which i host one of my Proxy site and nothing else (no databases, no emails, just the usual proxy files needed).
just today it stopped working it is showing the Centos Page .the URL is [url]
here are the steps that i have taken till now without success: 1. restarted the server 2. stopped and restarted some critical services like httpd etc. 3. restarted my free crappy control panel also Ravencore
but all without success
if u feel that u can help me out then can tell u my webmin root password also via PM (u must be a reputed member).
I have a client who has 3 to 4 websites. His websites are database driven mysql. When we transfered to a new server everything works. Then he requested a iconv and GD installations. Then it was installed. Now all of his sites is impossibly to view but its up. The rest of the clients are doing just fine. What do you think is the problem? we recompiled php several times already same thing.
My Webhost suddenly does not allow php contact forms! Instead, they expect me to change all forms on 16 sites hosted by them to use a phpFormMail solution they provide. It's a real hassle.
I've got something very strange going on....This is a CentOS server running Plesk (32 bit)...I've got clientexec installed and it has been running perfectly fine for a long time now. Today, in the middle of invoicing some clients, I got the zend optimizer not loaded page...which is weird, since i know it is loaded. Nevertheless, I downloaded the source again and reinstalled Zend and the page is still showing up. Could an automatic plesk update have caused this? (I'm not too familiar with what files are updated and whatnot when control panels are updated)
I really need to figure out what's going on here. I can get you any information you need. Are there supposed to be additional lines in the php.ini relating to the optimizer? Because I opened VI and searched for optimizer and nothing came up.......
DNS lookups against domains on my server are suddenly failing. The /etc/resolv.conf shows 3 entries for uplink DNS servers at my provider (theplanet). Bind is running, too.
What else could cause this? All sites are accessible via IP, but not by name anymore.
I have a server that I access through remote desktop. Suddenly I am getting the message "Remote Desktop Disconnected: The computer can't connect to the remote computer." when using Remote Desktop.
It was working a few minutes ago.
A while ago I suspected that someone knew the password for the box. I did change it at the time, and thought the issue was solved. Is it possible to turn off remote desktop remotely (whilst using remote desktop).
Power cycling the server isn't making any difference.
Any other options other than putting in a support request at the host?
In the last few days the responses from Plesk's XML API have been extremely slow. It's now taking an average of 45 seconds to handle an XML API request where it used to be more around 5 seconds. What would cause that? What service handles these requests on the server so I can try rebooting it?
FTP logins worked fine yesterday. Today I get a 530 Login incorrect.
I think the only change since yesterday was a server reboot.
/var/log/secure tells me that /etc/ftpusers is missing
Code: Jun 8 00:33:19 macbook proftpd: PAM unable to dlopen(/usr/lib64/security/pam_stack.so): /usr/lib64/security/pam_stack.so: cannot open shared object file: No such file or directory Jun 8 00:33:19 macbook proftpd: PAM adding faulty module: /usr/lib64/security/pam_stack.so Jun 8 00:33:19 macbook proftpd: pam_listfile(proftpd:auth): Couldn't open /etc/ftpusers
I didn't know if it should go in here on in Web Hosting.
One of the prospective hosts I'm looking at for shared hosting uses a phrase I'm not sure about what it means and the sales person I spoke to didn't know, either (and he tried to fudge it, which is worse than admitting you don't know.)
Anyway, one of the phrases used that I haven't seen anywhere else is that they have php5 "as a module" and I'm not sure what is meant by that. Each account is running a stand-alone instance of php? php5 is a module that's installed upon customer request?
Trying to troubleshoot an exploit where the code redirecting people to exploit sites is not in the website. I think a module is being loaded dynamically, but I am not seeing the entry point in the access logs. I restart httpd and the problem goes away temporarily.
Anyone see anything fishy?
================== HTTPD MODULES ================== [root@xxx ~]# httpd -L <Directory (core.c) Container for directives affecting resources located in the specified directories Allowed in *.conf only outside <Directory>, <Files> or <Location> <Location (core.c) Container for directives affecting resources accessed through the specified URL paths Allowed in *.conf only outside <Directory>, <Files> or <Location> <VirtualHost (core.c) Container to map directives to a particular virtual host, takes one or more host addresses Allowed in *.conf only outside <Directory>, <Files> or <Location> <Files (core.c) Container for directives affecting files matching specified patterns Allowed in *.conf anywhere and in .htaccess when AllowOverride isn't None <Limit (core.c) Container for authentication directives when accessed using specified HTTP methods Allowed in *.conf anywhere and in .htaccess when AllowOverride isn't None <LimitExcept (core.c) Container for authentication directives to be applied when any HTTP method other than those specified is used to access the resource Allowed in *.conf anywhere and in .htaccess when AllowOverride isn't None <IfModule (core.c) Container for directives based on existance of specified modules Allowed in *.conf anywhere and in .htaccess when AllowOverride isn't None <IfDefine (core.c) Container for directives based on existance of command line defines Allowed in *.conf anywhere and in .htaccess when AllowOverride isn't None <DirectoryMatch (core.c) Container for directives affecting resources located in the specified directories Allowed in *.conf only outside <Directory>, <Files> or <Location> <LocationMatch (core.c) Container for directives affecting resources accessed through the specified URL paths Allowed in *.conf only outside <Directory>, <Files> or <Location> <FilesMatch (core.c) Container for directives affecting files matching specified patterns Allowed in *.conf anywhere and in .htaccess when AllowOverride isn't None AuthType (core.c) An HTTP authorization type (e.g., "Basic") Allowed in *.conf only inside <Directory>, <Files> or <Location> and in .htaccess when AllowOverride includes AuthConfig AuthName (core.c) The authentication realm (e.g. "Members Only") Allowed in *.conf only inside <Directory>, <Files> or <Location> and in .htaccess when AllowOverride includes AuthConfig Require (core.c) Selects which authenticated users or groups may access a protected space Allowed in *.conf only inside <Directory>, <Files> or <Location> and in .htaccess when AllowOverride includes AuthConfig Satisfy (core.c) access policy if both allow and require used ('all' or 'any') Allowed in *.conf only inside <Directory>, <Files> or <Location> and in .htaccess when AllowOverride includes AuthConfig AddDefaultCharset (core.c) The name of the default charset to add to any Content-Type without one or 'Off' to disable Allowed in *.conf anywhere and in .htaccess when AllowOverride includes FileInfo AcceptPathInfo (core.c) Set to on or off for PATH_INFO to be accepted by handlers, or default for the per-handler preference Allowed in *.conf anywhere and in .htaccess when AllowOverride includes FileInfo AccessFileName (core.c) Name(s) of per-directory config files (default: .htaccess) Allowed in *.conf only outside <Directory>, <Files> or <Location> DocumentRoot (core.c) Root directory of the document tree Allowed in *.conf only outside <Directory>, <Files> or <Location> ErrorDocument (core.c) Change responses for HTTP errors Allowed in *.conf anywhere and in .htaccess when AllowOverride includes FileInfo AllowOverride (core.c) Controls what groups of directives can be configured by per-directory config files Allowed in *.conf only inside <Directory>, <Files> or <Location> Options (core.c) Set a number of attributes for a given directory Allowed in *.conf anywhere and in .htaccess when AllowOverride includes Options DefaultType (core.c) the default MIME type for untypable files Allowed in *.conf anywhere and in .htaccess when AllowOverride includes FileInfo...
I am trying to configure a 2.6.18 kernel and I cannot get it to read the raid5 module since my system is utilizing a software RAID5.
Whenever I build I receive the following error:
[root@localhost linux-2.6.18.8]# make install sh /root/kernel/linux-2.6.18.8/arch/x86_64/boot/install.sh 2.6.18 arch/x86_64/boot/bzImage System.map "/boot" WARNING: No module raid5 found for kernel 2.6.18, continuing anyway
I have tried versions 2.6.18 and 2.6.18.8 and both give me the same issue.
I have CONFIG_MD_RAID456=m in my .config so the module should be getting configured.
I tried ignoring the warning but when I boot up my system in 2.6.18 I get a kernel panic error, could not sync. (I'm guessing because it doesn't have the RAID module). Everything works fine when I boot up in the 2.6.9 CentOS kernel.
I would like to know is there any module for Apache which can collect information like who is surfing our website and how many pages they have accessed in last one hour. I know awstats or webalizer can do this but i need some thing realtime on apache level.
