The last packet successfully received from the server was 60.410.682 milliseconds ago. The last packet sent successfully to the server was 60.410.687 milliseconds ago. is longer than the server configured value of 'wait_timeout'. You should consider either expiring and/or testing connection validity before use in your application, increasing the server configured values for client timeouts, or using the Connector/J connection property 'auto Reconnect= true' to avoid this problem.
I would like to know what are the kernel values for an RPM kernel.. I mean, I have the latest 2.6.x kernel running on a RHE 4 system, my question.. Is there any way to know the actual kernel values (drivers, options, etc)?
Same as when we write a phpinfo file (that shows libraries, etc) to know php values..
I have a linux vps with 384mb dedicated and 1GB burst RAM. I am using it to host phproxy web proxy sites. Can you please recommend good values for the following Apache/1.3.37 httpd.conf settings?
If you enable ssl in apache, you can verify a client certificate. If so apache will create a environment variable for you with the name 'SSL_CLIENT_VERIFY' with values 'NONE, SUCCESS, GENEROUS or FAILED:reason'. URL....What is the meaning of this different values?
yesterday i setup my first vps system and now its hosting 2 forums of my. Thing is in evry 10 mints Mysql & courier-imap are restarting..? I know this from the lxadmin alert email. So is it normal or is it a problem in my configuration..? Im running cent os 5 now. And i also check the log.. there is entry like below in it..
Oct 6 13:43:07 vps_10013 pure-ftpd: (?@127.0.0.1) [INFO] Logout. Oct 6 13:43:07 vps_10013 xinetd[8020]: EXIT: ftp status=255 pid=21638 duration=0(sec) Oct 6 13:43:13 vps_10013 xinetd[8020]: EXIT: smtp status=1 pid=21637 duration=6(sec) Oct 6 13:43:48 vps_10013 xinetd[8020]: START: smtp pid=21679 from=63.247.94.194 Oct 6 13:43:49 vps_10013 xinetd[8020]: EXIT: smtp status=1 pid=21679 duration=1(sec) Oct 6 13:44:48 vps_10013 xinetd[8020]: START: smtp pid=21901 from=63.247.94.194 Oct 6 13:44:49 vps_10013 xinetd[8020]: EXIT: smtp status=1 pid=21901 duration=1(sec) Oct 6 13:45:49 vps_10013 xinetd[8020]: START: smtp pid=22163 from=63.247.94.194 Oct 6 13:45:50 vps_10013 xinetd[8020]: EXIT: smtp status=1 pid=22163 duration=1(sec) Oct 6 13:46:49 vps_10013 xinetd[8020]: START: smtp pid=22499 from=63.247.94.194 Oct 6 13:46:50 vps_10013 xinetd[8020]: EXIT: smtp status=1 pid=22499 duration=1(sec) Oct 6 13:47:49 vps_10013 xinetd[8020]: START: smtp pid=23668 from=63.247.94.194 Oct 6 13:47:50 vps_10013 xinetd[8020]: EXIT: smtp status=1 pid=23668 duration=1(sec) Oct 6 13:48:49 vps_10013 xinetd[8020]: START: smtp pid=23920 from=63.247.94.194 Oct 6 13:48:52 vps_10013 xinetd[8020]: EXIT: smtp status=1 pid=23920 duration=3(sec) Oct 6 13:49:49 vps_10013 xinetd[8020]: START: smtp pid=24173 from=63.247.94.194 Oct 6 13:49:53 vps_10013 xinetd[8020]: EXIT: smtp status=1 pid=24173 duration=4(sec) Oct 6 13:50:49 vps_10013 xinetd[8020]: START: smtp pid=26117 from=63.247.94.194 Oct 6 13:50:53 vps_10013 xinetd[8020]: EXIT: smtp status=1 pid=26117 duration=4(sec)
I have a mail server which is courier, postfix, amavisd, using Mysql db and virtual mailboxes which I administer through postfixadmin.
I want to be able to add a set of default folders to all mailboxes created such as Possible Spam and some others.
I have investigated shared folders but this is not what i want, is there a way I can get courier/postfix to create a set of additional sub-folders when it creates a mailbox.
Whats the upper dangerous limit of ampere at ground connections for servers?
IBM and HP servers has ground connection of electricity.
So ground connection never stands in 0 value it has some + ampere and i would like to know whats the dangerous or maximum limit of ampere in ground connection.
After setting up some e-mail accounts over the plesk gui I tried to connect via a mail software (like thunderbird).
This failed with every combination of settings I tried. So I checked if the POP3/IMAP services are running correctly using telnet.
I connected using the following command:
Code: telnet <host-ip> 110
The response was:
Code: Trying <host-IP>... Connected to <host-IP>. Escape character is '^]'. -ERR Cannot connect to POP server <host-IP> (<host-IP>:110), NB connect error 1460 Connection closed by foreign host.
Did I miss to enable a setting?
The Plesk gui schows me, that the corresponding services are running...
Yesterday we upgraded two of our servers to the latest Plesk 12.
The 1st server is an CentOS/CLoudlinux 6.x server and the 2nd an CentOS 5.x server.
Both of them were running Plesk 11.5 before the upgrade.
After the upgrade, we have the same issue in both servers which is that the START/TLS, SSL protocols at Courier imaps or pop3s do not work, and mail clients (outlook, thunderbird) return that the password is wrong when they connect over a secure connection.
In both of them, at the /var/log/maillog, we are getting the same messages, as the following one:
I am trying to secure my VPS and one thing noted in a recent scan was SSL v2 and v3 being supported for SMTP, POP3 and IMAP. So a check of ‘Disabling SSLv3 Support on Servers’ and the Postfix configuration settings suggest:
Examining both only the copy in /etc/postfix/ is configured and at the end of this file I can find all the Plesk settings, including some RBLs I’ve defined via the UI. Hence I know this is the working config as of the two, it’s the only one actually configured. Hence I add the required commands to the config:
... smtpd_tls_key_file = $smtpd_tls_cert_file smtpd_tls_security_level = may smtpd_use_tls = yes smtp_tls_security_level = may
[Code] ....
I then go to the Plesk Tools & Settings > Services Management and restart:
Now what I should get back is an error as the attempt to connect with SSLv2 should fail as it's an excluded protocol, but instead what I get back is the Plesk cert and a connection:
# openssl s_client -connect x.x.x.x:25 -starttls smtp -ssl2 CONNECTED(00000003) depth=0 C = US, ST = Virginia, L = Herndon, O = Parallels, OU = Parallels Panel, CN = Parallels Panel, emailAddress = info@parallels.com verify error:num=18:self signed certificate ...
Why? What do I need to do to have Postfix use the updated config and refuse an SSL2 connection?
I seem to have the same issue with Courier having made similar changes to the /etc/courier-imap/pop3d-ssl file:
is there a way to set global php values settings for all Domains in Plesk 12. In the older version of Plesk I can do it by linux in /etc/php.ini and restart the apache and all Domains will be load this configuration. But from Plesk 11 the settings are not loading from /etc/php.ini, only by the own php.ini file.How can I do it for all domains?
Hopefully I'm posting this in the correct area. Our server runs CentOS 4.4 on x86_64 arch.
So basically everything was going rather smoothly...
Problems began to arise at the point where I finished installing/configuring SquirrelMail. Upon logging in, I saw this:
[see attachment]
Ok, so I checked maillog and saw:
Feb 11 13:50:46 zeus imapd: LOGIN, user=alex, ip=[::ffff:127.0.0.1], protocol=IMAP Feb 11 13:50:47 zeus imapd: Failed to connect to socket /tmp/fam-- Feb 11 13:50:47 zeus imapd: Failed to create cache file: maildirwatch (alex) Feb 11 13:50:47 zeus imapd: Error: Input/output error Feb 11 13:50:47 zeus imapd: Check for proper operation and configuration Feb 11 13:50:47 zeus imapd: of the File Access Monitor daemon (famd). Feb 11 13:50:47 zeus imapd: DISCONNECTED, user=alex, ip=[::ffff:127.0.0.1], headers=0, body=0, rcvd=21, sent=57, time=1
So I did some searching and determined it was a problem with Courier-IMAP being compiled with File Alteration Monitor support and famd not running (I built RPM directly from source tarball without any customization whatsoever per the instructions on the Courier website).
I found some possible solutions to be:
1) Install and run fam and be sure portmapper is running as well (problem being is that fam has since been replaced by gamin on CentOS, which is installed properly on my system). 2) Do a source install of Courier-IMAP and --disable-fam
Ok, so route 1 went like this: I uninstalled gamin, found fam-2.6.8, installed it, started it manually, made sure portmapper was running and tried again. This time, I still got the same errors in SquirrelMail, but the errors in maillog didn't show up. However, shortly after the page loaded, the famd process I had started manually promptly ended without my intervention. Ok, onto trying #2.
Route 2 went like this: reinstalled gamin, then I tried building a custom RPM by manually configuring with --disable-fam and then using rpmbuild -bc --short-circuit and rpmbuild -bi --short-circuit. That didn't change anything at all, I still had the same errors both with SquirrelMail and in maillog. Then I said ok, I'll just do a complete source install. ./configure --disable-fam && make && make install. Manually started that server, tried again, same deal, both errors.
So I've got problems. Either with Courier-IMAP, SquirrelMail, or both. The other daemons seem to run fine, I just mentioned them in case of the possibility of some kind of (unknown to me) conflict.
If you need to see any of my configs, let me know...any information greatly appreciated...I'm desperate.
