I have an Ubuntu 8.04 server with 2 nerwork cards eth0 and eth1. I am using only eth0. The server is behind a 2-wire router. I have setup the router with the public IP addresses.
On the server I have setup an IP alias on eth0 as eth0:0. I have 3 domains which i will call foo1.com foo2.com and foo3.com. The server pc is assigned to a static public address on the router as 217.xx.xx.100 this same ip also used to setup the virtual host for foo1.com
When I am on the router I can access all the domains via the browser and can also get FTP, and ssh connection to the server. However when I leave the range of the server and connect to the net via another router, I loose ftp and ssh access to the server as well as not able to browse www.foo1.com. However www.foo2.com and www.foo3.com I can browse.
OS CentOS 6.5 (Final) Plesk version 12.0.18 Update #6, last updated at July 2, 2014 11:13 AM
The system is up-to-date; last checked at June 27, 2014 04:43 AM
All current websites on the server seem to work fine any new subscriptions we cannot get working at all.
We can connect via FTP to new sites SOMETIMES - just cant get directory listing. When we can connect and get into a directory it slows down.
In Active mode: Command:MLSD Response:425 Unable to build data connection: Connection refused Error:Failed to retrieve directory listing​ Install Wordpress via the Parallels panel it loads and says it is all there, just can't log or display any pages. The default Parallels page is displayed.
Upload a html page via the File Manager in Parallels and it displays the default Parallels page.
Unpack the Wordpress tar file via File Manager and it displays the default Parallels page.
The Wordpress feature in Parallels says it is working fine, can't display any page, can't log in as it returns a 404 page or the default Parallels page.
Create a site in Presence builder and Parallels says there is a site. The default Parallels page is displayed when opening the site.
Go to DOMAINS and there is 0mb in space used and there are files listed in the File Manager - none of which can be displayed.
My customer wants a Windows system - but I'm rusty at best in Windows.I downloaded VC11 x86 Thread Safe (2013-Nov-13 20:57:44), unpacked it, moved it to it's own directory, edited httpd.conf (no auto installation) and confirmed it was working (localhost/index.html)
I added PHP and ran a PHP info - a little trouble getting the php.ini found.Apache seems to work fine on the local system - either localhost/index.html or nn.nn.nn.nn/.But remote browsers timeout when attempting to connect.
1. I've opened command as administrator and run httpd.exe directly
2. I've installed httpd.exe as a service, opened it's properties window and started it from there
3. Changed the listen port to 8080
4. netstat sees the remote browser with a waiting connection - and the local service
5. The Windows system is on my Mac network (same systems where the remote browser is) and I have transferred megabytes of files between the two systems.
In Component Services - the Apache2.4 service shows Log On As 'Local Service' - I'm guessing it should show as 'Network Service.I tried changing this - used the local user login - restarted the service. I didn't see any way to change it to 'Network Service'. Perhaps this is the problem?
ODDLY - the remote browser worked briefly - then failed with the same 'time out'.I'm guessing this is something simple that I don't understand about Windows - (then again, since I don't understand much about Windows, it could be complicated too).
The directions I recieved were "Please use remote desktop to connect to your server."
So I entered the ip address into the remote desktop connection window and it doesn't connect. Where do I go from here? I searched and can't find any relevant info.
My hoster told me to use PuTTY, a terminal, to install something called a vnc. I tried to install it ,but gets rejected everytime I connect.(I was using realvnc and connecting through a tunnel) Is there another way to get to the GUI or something like that?
I am using Vista and trying to connect to Linux (Debian)
We have got 200 customers, and we will to change to cpanel.
The MYSQL server is on a solaris zone. It is possible to make the remote connecting with it. I will import the 200 users MYSQL databases to cpanel, with privileges (user settings). The mail/web dir a will import manuali to cpanel server(copy-paste-setuser:group).
One day, you noticed that someone remotely connectted your computer and an application sends spam/phishing emails bu using your IP. What do you do?
Of course, I stopped the program and blocked remote connection for a while and changed my password... I any way, i have to connect my computer remotely... What do you advice?
By the way, i have more than 1000 email accounts on my computer. Hacker left me a gift, but I don't need them))
I have 2 identical Fedora8 boxes with Apache 2.2.8, MySQL 5.0.45 and PhP 5.2.4. I use one as the Web+DB server (say box A), and the other (box B) just as the Web server connecting to the DB server on box A. I use this 2 machine configuration to test a LAMP based-Web application. I have a client program on other machines that can emulate a massive web workload to these 2 servers; it can emulate hundreds to thousands of users using the application simultaneously.
Before running the test, the connection to the DB server from both boxes seem fine. Using the mysql client program on either box A or B trying to connect to the DB, the connection goes through instantly. In the /etc/my.cnf file, I have max_connections=4096 and max_user_connections=4096. Note that the web app uses one single db user to connect to the db. To allow remote connection, I inserted one record into the user table of the mysql db whose the host field's value is '%' (allow connection from all remote hosts).
After running the test (which I found out that many requests sent to box B failed), mysql client program on box A is still able to connect to the db instantly; but the one on box B has a problem: it takes extremely long (5 - 10 minutes or even more) to establish the connection, it doesn't time out, just takes that long. I believe that's the cause for the failure of requests to box B.
my site is working fine for somedays and suddenly its stoped and hanged and also my PPP is not working , and file manager in PPP its give me this error VZAgent returns error #422: "Cannot initialize connection to remote host" and the suppord admin said I have problem in failcnt
I am trying to access my server remotely using Windows' Remote Desktop Connection. It functions perfectly, but it does not go full screen because my local screen res is 1680x1050 ...
Does anyone know any other remote desktop applications which work better in this way?
I know I could just change the local res settings but it is a bit of a nuisance and looks really weird if I set it to something non-wide-screen...
I have a remote XP PC: 172.16.1.5 OpenVPN connection with route added for 192.168.2.0/24 to go via the VPN
Now on the other end the network consists of:
I have a OpenVPN server inside the lan on 192.168.2.245 Its default gateway is 192.168.2.1
I have 3 Windows Servers, 192.168.2.246, 247 and 248. All gateways are set to 192.168.2.1.
I have a ethernet router on the network, 192.168.2.1, it has a route added for 192.168.0.0/16 to go via 192.168.2.245, and route added for 172.16.0.0/24 to go via 192.168.2.245 also). the 192.168.0.0/16 is incase any other LANs are connected at a later date, if computers saw any packets not on the the 192.168.2.x subnet they would be routed to the default gateway which would then pass them to the OpenVPN router.
The trouble is, i can remotely connect and ping to the OpenVPN router fine and also the ethernet router, however when i ping any of the Windows boxes it times out. But i can open up Remote Desktop and connect to the windows box without problem, infact if i am running 'ping 192.168.2.246 -t' it will suddenly come alive but only after the RDP connection is made.
Is this something funny with the routing? I want to keep the OpenVPN server internal to the network and i appreciate it is hitting the ethernet router then being passed to the OpenVPN but something is weird as it fires up RDP fine but not ping. No firewalls are enabled on any of the boxes. If i log into ssh on the OpenVPN router or ethernet router i can ping from that to the windows boxes fine.
Its as if a ICMP redirect is issued, and all is well after the 1st connection. Not too sure but could anyone be kind enough to enlighten me?
I have a problem with a client whose mails are getting rejected because it fails rdns check, can any one tell me how to add this domain in Exim's whitelist so that the mail is sent/recieved even if rdns or any other checks fail.
Gathering header information file(s) from server(s) Server: CentOS-3 - Addons retrygrab() failed for: http://mirror.centos.org/centos/3/ad...rs/header.info Executing failover method failover: out of servers to try Error getting file http://mirror.centos.org/centos/3/ad...rs/header.info [Errno 4] IOError: <urlopen error >
when I run /etc/easyapache it too fails
Quote:
root@server1 [~]# /scripts/easyapache Testing connection speed...(this could take a while)............Done Ping:32.076 Testing connection speed to 69.90.250.35 using pureperl...(120500.00 bytes/s)...Done Ping:32.179 Testing connection speed to 69.90.250.34 using pureperl...(120500.00 bytes/s)...Done Ping:49.545 Testing connection speed to 69.72.164.152 using pureperl...(76681.82 bytes/s)...Done Ping:49.605 Testing connection speed to 69.72.164.155 using pureperl...(70291.67 bytes/s)...Done Ping:51.603 Testing connection speed to 198.66.92.147 using pureperl...(76681.82 bytes/s)...Done 5 usable mirrors located Fetching http://layer1.cpanel.net/buildapache.sea (0)....@69.90.250.35......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...13%...14%...15%...16%...17%...18%...19%. ..20%...21%...22%...23%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...38%...39%...40%...41%...42%...43%...44%...45%...46%. ..47%...48%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...62%...63%...64%...65%...66%...67%...68%...69%...70%...71%...72%...73%. ..75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...87%...88%...89%...90%...91%...92%...93%...94%...95%...96%...97%...98%...100%...... Done Creating directory buildapache Verifying archive integrity... All good. Uncompressing buildapache........................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ................................................................. Checking Update System........Your operating system's rpm update method (yum) was not able to locate the glibc package. This is an indication of an improper setup. You must correct this error before you can proceed. Please correct the conflicts and try again! initfpsuexec: using apache 1.x support Waiting for httpd to restart..............finished.
I've got a client using zoneedit.com and their domain.tld is being redirected to the right ip, however, it gets redirected to our main site. but, if you type in domain.tld/index.php its fine.
please be patient with me, im new to dns technical issues.
What im trying to do is, I have a a web design company that offers hosting for the content we design. Now i have a customer who has a domain name registered through godaddy on their own account. How do i get the website content to appear when a visitor types in the domain name.
My hosting account has a dedicated ip if that makes a difference.
I understand that there may be more ways than one to accomplish this task.
I recently switched to HostGator, and in order to for me to receive my Formmail/email the techs at HostGator had to set my domain as a remote domain for the mail to leave the server. It works now and I am very happy costumer, I just want to understand what that is exactly.
