I've a new installation of Plesk 12 on a VPS (Ubuntu LTS12.04) and when FastCGI is selected it downloads the PHP files instead of parsing the PHP? Where to look config wise? I've checked php short tag options and they all seem fine.I've set up a test subscription to display the error here: URL....
View 5 RepliesWhen I click on the "Change settings" button for any of my jails a page opens showing the following error message:
Messagef2bmng failed: ERROR:f2bmng:File contains parsing errors: /etc/fail2ban/action.d/iptables-multiport-log.conf [line 24]: 'iptables -N fail2ban-<name>-log
' [line 26]: 'iptables -A fail2ban-<name>-log -j DROP
' [line 33]: 'iptables -F fail2ban-<name>
' [line 34]: 'iptables -F fail2ban-<name>-log
' [line 35]: 'iptables -X fail2ban-<name>
' [line 36]: 'iptables -X fail2ban-<name>-log
'
FileAgent.php
Line243
TypePleskUtilExceptionClick to expand...
I setup PHP support to Run as FastCGi Application, and i setup the memory_limit=32M in DOMAIN/etc/php.ini, then i create a php program with ini_set('memory_limit','128M'), it does not according to my settings are limited. How can i limit it , only just use the disable_function = 'ini_set' ? or Was there other methods ? Because, When PHP runs as apache module , i can use the php_admin_value in vhost.conf to limit what i want , it does not limit everything like this (disable_function).
View 3 Replies View RelatedIn my Plesk 12.0, I installed support por PHP 5.3, and 5.4. But when I go to configure my site, I only can select these versions if I put PHP like FastCGI:
But in "Apache Module" I only can select PHP 5.3.3:
My WebSite doesn't work with FastCGI, only with "Module Apache".
Why I cannot select 5.3.29 with "Module Apache".
I have:
Debian 7.5
Plesk 12.0.18
In the hosting setting i have selected:
PHP support (Run PHP as FastCGI application , PHP version 5.4.4)
The web instead of interpreted php makes me do the download of a file. How can I fix?
Where the file that holds PHP fastcgi configuration is located. I was told its here but it's not
/etc/nginx/conf.d/*.conf.
I've been working on a project that I am trying to utilize some of the new functions from PHP 5.5 so I changed the PHP version from 5.3 to 5.5 on this domain, but I am getting a 500 error. I've found this kb: [URL] .... which is my exact issue, but the resolution doesn't work for me.
All of the permissions are set right, all of the modules are compiled and registered correctly, but I'm still getting a 500 error.
From error_log:
Code:
[Sun May 31 20:32:31 2015] [warn] [client] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Sun May 31 20:32:31 2015] [error] [client] Premature end of script headers: adduser-exec.php
# /usr/local/psa/admin/bin/php_handlers_control --list :
[Code] ....
What exact file to modify in order to optimize fastcgi settings, then to set default for all websites. Sample code below:
# execute all .php files via php-fpm
location ~ .php$ {
# connect to a unix domain-socket:
fastcgi_pass unix:/var/run/php5-fpm.sock;
fastcgi_index index.php;
[Code] ....
We have updated our Plesk 10.4.4 to 12.0.18. We want to use PHP with FastCGI (Apache) and get always the following suexec - error:
command cgi_wrapper not in docroot (10004)
We use CentOS 6.4
I have this System Debain 7.x Whyzee, 64 Bit Version, 16 GB Ram with 8 x 3.2 GHZ. I have update plesk von version 11 to version 12 he say any failure in error.logs by costumer
Code:
[Sat Jul 19 20:58:23 2014] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Sat Jul 19 20:58:23 2014] [error] [client xx.xx.xx.xx] Premature end of script headers: index.php
Have the same case for 4 servers (web and pro), the menu in plesk could not show another choice, only fastcgi.
Handlers look like ok:
root@serveur:~# /usr/local/psa/admin/sbin/php_handlers_control --list
id: display name: version: type: cgi-bin: cli-bin: php.ini:
module 5.4.4 5.4.4 module /usr/bin/php5-cgi /etc/php5/cgi/php.ini
fastcgi 5.4.4 5.4.4 fastcgi /usr/bin/php5-cgi /etc/php5/cgi/php.ini
cgi 5.4.4 5.4.4 cgi /usr/bin/php5-cgi /etc/php5/cgi/php.ini
[code]....
How to force to display php module ?
I use centos 7 , atomic repo, plesk 12 12.0.18 Update #37 php fpm not work.
[root@vmi36735 ~]# systemctl status php-fpm.service
php-fpm.service - The PHP FastCGI Process Manager
Loaded: loaded (/usr/lib/systemd/system/php-fpm.service; enabled)
Active: failed (Result: resources)
[Code] ....
I changed to a new server with plesk 12 and every php that worked with Plesk 11.5 and php 5.4 doesn't work in the new server with fstcgi and php 5.4. They run fine if I config subdomain with FastCgi php5.3 but don't with php 5.4.35. I get this error message in error_log of subdmain using this versión of php (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server. Premature end of script headers: test.php
there is no error in /var/log/httpd/suexec_log phpini seems OK.My system uses Centos 6.4 and
I have the following problem, the files and folders generated by PHP are hidden in FTP.
I can see in the Plesk file manager that users, permissions and groups are the same for all files and folders (those that can be seen and those that cannot be seen from FTP).
All the options in the server are set by default. It is a new installation of Plesk 12.0.18 #4 in CentOS 6.5 (Final).
SO: CentOS 6.5 (Final)
Plesk: 12.0.18 #4
PHP: FasctCGI
Apache Modules:
PleskLog File
104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Mon Jun 22 15:33:11 2015] [error] [client 176.10.112.11] Premature end of script headers: import_cop.php
and Apache Log
[Mon Jun 22 11:06:57 2015] [error] server reached MaxClients setting, consider raising the MaxClients setting
[Mon Jun 22 15:46:17 2015] [error] (12)Cannot allocate memory: fork: Unable to fork new process
PHP Warning: Module 'zip' already loaded in Unknown on line 0
How can I fix this problem? The Script is 100% i/O because it has worked onder PHP 5.2 and its comp. whit 5.4.
I have an issue with running of the php-scripts. It runs via Cron (as it consumes a lot of memory), after aprox. 10 minutes after the start-time of the script the following error appears in the error-log file (path - /var/www/vhosts/system/subdomain.domain.tld/logs/error_log)
[Tue Feb 17 19:46:57.003326 2015] [fcgid:warn] [pid 28629] (104)Connection reset by peer: [client XX.XXX.XXX.XXX:48450] mod_fcgid: error reading data from FastCGI server
[Tue Feb 17 19:46:57.003368 2015] [core:error] [pid 28629] [client XX.XXX.XXX.XXX:48450] End of script output before headers: Name_of_the_script.php
For a very strange reason another PHP-script, that has the same code, but just runs less arrays, and therefore consumes less memory and can be run via browser - works perfectly from both browser and the cron. The php.ini for this domain set up correctly (see the attachment)...
I have this error.
Code:
[Mon Mar 23 20:53:14 2015] [warn] [client xxx.xxx.xxx.xxx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Mon Mar 23 20:53:14 2015] [error] [client xxx.xxx.xxx.xxx] Premature end of script headers: index.php
My VPS
OSDebian 7.8
Plesk version12.0.18 Update #38
Code:
<IfModule mod_fcgid.c>
<IfModule !mod_fastcgi.c>
AddHandler fcgid-script fcg fcgi fpl
[Code] .....
I'm trying to add multiple PHP version (current version installed: 5.5.13), using the official documentation. I always get 500 Internal Server Error after switching to the new version, with the following error_log content:
Code:
[Sat Jun 07 00:49:35 2014] [warn] [client XXX.XXX.XXX.XXX] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Sat Jun 07 00:49:35 2014] [error] [client XXX.XXX.XXX.XXX] Premature end of script headers: index.php
Here you can view phpinfo() obtained running php54-cgi index.php from the command line. Same script doesn't work as FastCGI.
I'm trying to add PHP 5.4.29. Here is how I compiled it:
Code:
./configure
--prefix=/usr/local/php54
--with-bz2
--with-config-file-path=/usr/local/php54/etc
--with-config-file-scan-dir=/usr/local/php54/etc/php.d
--with-curl
[code]....
Switching back to PHP 5.5.13 and the script works fine (a simple phpinfo() output).How can I try to understand/debug what's wrong with the installation?
I installed FastCGI and configured it via fcgiconfig.js using this command
cscript fcgiconfig.js -add -section:"PHP" -extension:php -path:"C:PHPphp-cgi.exe"
It configured fcgiext.ini and added the .php extension to the sites and what not.
When accessing a php script, I get the following error though:
FastCGI Error
The FastCGI Handler was unable to process the request.
Error Details:The FastCGI process exited unexpectedly
Error Number: -2147467259 (0x80004005).
Error Description: Unspecified error
HTTP Error 500 - Server Error.
Internet Information Services (IIS)
I did not do anything special with the PHP. It is the zip 5.2.5 from the site. I configured php.ini and move it to c:/windows. I granted IUSR permission on php-cgi.exe
Am I missing something? I followed the guide here
Windows 2003 / IIS6 / PHP 5.2.5
I have Plesk 11.0.9 From Godaddy.
I have a problem in PHP Errors Log/Display in PHP 5.4.15 FastCGI
In my configuration "C:Program Files (x86)ParallelsPleskAdditionalPleskPHP54php.ini"
error_reporting = E_ALL & ~E_NOTICE
display_errors = On
display_startup_errors = On
log_errors = On
log_errors_max_len = 1024
In my Plesk Web Panel Settings For the domain
error_reporting 32767 <- For 5.4.x
display_errors on
log_errors on
I made a PHP error in test file
Code:
<?php
echo eeeee;
?>
It should give me error in line 2 [ Display & Log ] the error. but it don't do anyone of them it gave me 500 Internal Server Error and it's not logging the error to the directories
C:inetpubvhostsDomain.comstatisticslogs
OR
C:Program Files (x86)ParallelsPleskadminlogsphp_error.log
C:Program Files (x86)ParallelsPleskadminlogsphp_error.log <--- Successfully logging Errors Like
[14-Dec-2013 13:12:07 UTC] rrdtool execution failed: ERROR: fetching cdp from rra
But don't logging the websites errors....
I want to use php code in .html extension files. I tried to accomplish this through a .htaccess file, but that did not work out. I tried to add a handler through cpanel, but it does not parse the code in the .html file. I renamed the index file to index.php and works fine.
I would like to keep the .html extension.
I tried several Handlers through Cpanel which all failed to work.
Tried: AddHandler application/x-httpd-php .php .html and AddType application/x-httpd-php .php .html (with and without application/) and AddHandler server-parsed .html
to open EML files on apache webserver, actually when I load an eml (outlook email message) by using an URL, it shows the email code, it is not pasing it correctly.
What libraries (apache or system) do I need installed to parse this kind of files?
Im using apache 2.0.6.3, php 5.2.6 and RHE 5.2
My company has designed a test-run log parsing system.
Currently it supports
Code:
gLog currently supports the follow formats:
SSH(Proto 1,2)/Linux
POP3/Linux
Pure-FTP/Linux
Some logs you can currently upload are:
/var/log/secure
/var/log/auth.log
/var/log/messages
/var/log/maillog
We will be adding support for Windows Servers as well as Windows XP soon.
It will also be able to parse apache/lightd logs and check for common exploits such as: RFI/LFI/SQL.
Please upload your logs files to help this database grow.
I using RHES 4 + cPanel.
I have MySQL 5.x, and PHP 4.4.6.
I noticed that all sites on the server, can not parse php files, tried restarting httpd, recompiling using apache update or easyapache script, and the problem stills.
index.php is at DirectoryIndex, also Addtype shows php extension active at httpd.conf.
but, when I type "php -v" from the shell, i got this message:
Code:
php: /usr/lib/libmysqlclient.so.14: version `libmysqlclient_14' not found (required by php)
I found someone with the same problem, tested the solution posted there but it doesnt seems to solve this issue.
While clicking on "Edit DNS" in WHM
I am getting this error
Unable to parse zone: Error while parsing zonedata for xyz.com: syntax error, line 25 ...propagated at /usr/local/cpanel/Cpanel/CPAN/Net/DNS/ZoneFile/Fast.pm line 142.
My webserver treat ALL files with html tags inside as html files, e.g. text files or EVEN files without extension.
How to only allow .htm, .html files?
I've deactivated temporary mime magic, I also tried with some RemoveHandler, AddType lines but nothing
I already have php successfully compiled as apache modules but not the fastCGI version, i just trying to compile with the following setting, but weird, could not get the php-cgi binary out of it, only the apache module :
./configure --prefix=/usr/local/apache2/php --with-config-file-path=/usr/local/apache2/php --enable-wddx --enable-trans-sid --enable-dio --enable-sysvsem --enable-mbstring --enable-ftp --enable-versioning --enable-force-cgi-redirect --enable-so --enable-inline-optimization --enable-bcmath --enable-calendar --enable-memory-limit --enable-sockets --enable-track-vars --with-apxs2=/usr/local/apache2/bin/apxs --with-zlib=/usr --with-xmlrpcb --with-gettext --with-xml --with-dom --with-dom-xslt --with-dom-exslt --with-openssl --with-bz2 --with-jpeg-dir=/usr --with-png-dir=/usr --with-iconv=/usr/local --with-curl --with-mysql-dir=/usr/local/mysql --with-pear --with-readline --with-gd --with-freetype2=/usr/include/freetype2/freetype --with-freetype-dir --enable-gd-imgstrttf --enable-gd-native-tt --enable-fastcgi --disable-debug
I was wondering whether anyone can help me, I'm having some major performance problems running PHP on IIS using Shane Caraveo's php_fcgi.dll
PHP: 5.1.1.
IIS: 6
Basically I'm getting to the point where the isapi requests jump rapidly to 400+ requests from a meagre 2 -5 requests. Given the high number of requests this is essentially bringing the server to a standstill.
Does anyone have any ideas how I can begin getting to the bottom of this either through network monitoring or application debugging?
installing PHP fastcgi on my Centos VPS. I have already Googled for this and tried most of the tutorials but nothing seems to work.
I have already compiled PHP with --enabled-fastcgi. What I ca't figure out is what to put in my .htaccess file.
Almost every tutorial on this compes up with a different way and none of these seem to work for me.