Plesk 11.x / Linux :: Subdomains Other IP Destination?

May 26, 2014

I have a problem with a particular application.
I have a domain bbb.com
I create a subdomain a.bbb.com

I wanted to point my domain to a.bbb.com under a different ip my server. So I went in the parent zone bbb.com order to change the ip of this subdomain. After 48h nothing worked ...

There are 24 I changed the area to tell Plesk subdomain manages its own area, and I changed all the IP for the new, but nothing happens again, I'm afraid it is not that ...

Or how to check whether the implementation is consistent?

View 3 Replies


ADVERTISEMENT

Plesk 11.x / Linux :: How To Change Notification Destination Email

Oct 27, 2014

I was wondering how to change the notification destination email for alerts sent by Plesk Health Monitor?
I tried to modify the XML configuration file with this at the beginning:

<Misc alarmsInterval="5">
<notificationEmail address="mydestinationemail@domain.com"/>
</Misc>

But it doesn't work.

View 9 Replies View Related

Plesk 12.x / Linux :: Block A Domain As Email Destination?

Mar 19, 2015

I'd like to know if it's possible with Plesk 12 to block a given domain as destination of emails.

For example: imagine I want some customers not to be able to send emails to addresses in the domain "@parallels.com".

I use Postfix for outgoing mails.

View 7 Replies View Related

Plesk 12.x / Linux :: Failed To Copy Files Storage To Destination Path - Disk Quota Exceeded

Mar 3, 2015

I am having problems with two accounts, I get the following errors:

Code:
Failed to copy files storage to destination path. stderr: filemng: Cannot open destination file '/var/www/vhosts/domain.tld/httpdocs/index.html.Chn3rn' System error 122: Disk quota exceeded stdout: filemng: Cannot open destination file '/var/www/vhosts/domain.tld/httpdocs/index.html.Chn3rn' System error 122: Disk quota exceeded

I have run the command

Code:
quotacheck -avugfm

And the output from the command

Code:
df -i

is:

Code:
Filesystem Inodes IUsed IFree IUse% Mounted on
/dev/vzfs 20000000 1542375 18457625 8% /
/dev/simfs 20000000 1542375 18457625 8% /tmp
/dev/simfs 20000000 1542375 18457625 8% /var/tmp
none 1415577 113 1415464 1% /dev

I am at a loss, I don't know what else to try.

View 1 Replies View Related

Plesk 12.x / Linux :: DNS Error Subdomains Not Present

Jan 17, 2015

subdomains are not in the network can reach subdomains of the primary name server, but not to those of domains hosted on the server.Here's an example of the results for two domains, one server name and another one that is hosted on the server.

Server: webserveritk.com
http://verdns.com/webserveritk.com
http://verdns.com/www.webserveritk.com
http://verdns.com/claro.webserveritk.com

Domain in the server
http://verdns.com/itknow.red
http://verdns.com/www.itknow.red
http://verdns.com/blog.itknow.red

The same in all domains in the server

I think it must be an error in the configuration of the DNS, domains are registered work because an external Hosting (Strato.de), but all changes made on my dedicated server (such as creating a subdomain or webmail) do not appear it is as if my server reportase no changes to the parent DNS server. But not how to fix it.

View 1 Replies View Related

Plesk 12.x / Linux :: Subdomains Redirect Www Prefix

Jul 15, 2015

We are starting to migrate our servers to Plesk and are building all necessary processes with the plesk xml api.

If I create a subdomain via api

Code:
<subdomain>
<add>
<parent>domain.com</parent>
<name>example</name>
<property>
<name>www_root</name>
<value>httpdocs/web/</value>
</property>
</add>
</subdomain>

The vhost configuration at apache gets this part

Code:
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteCond %{HTTP_HOST} ^subdomain.domain.com$ [NC]
RewriteRule ^(.*)$ http://www.subdomain.domain.com$1 [L,R=301]
</IfModule>

So every subdomain is redirected to prefix www. But if I create the subdomain via plesk panel, the mod_rewrite isnt created, as i want. I also tried reconfigure-all, but this rewrite part is always active. I have no possibility in plesk 12.0.18 to set the setting for www prefix like at normal sites. So what can i do to prevent it and where can i change it afterwards?

View 1 Replies View Related

Plesk 11.x / Linux :: Can't View Subdomains And Webmail

Sep 28, 2014

I have a server in my house. My IP local is 192.168.1.61 and i have other ip static public. I can view my domain and one subdomain, but i don't view other subdomain and webmail.

View 1 Replies View Related

Plesk 12.x / Linux :: Wildcard Subdomains Of Alias Domains

Jan 3, 2015

System: Plesk Panel 12, updated on CentOS 6

Situation:
"Main-domain" domain with 2 "alias-domains" (301-forward). For "Main-domain" I created a wildcard subdomain. All works fine.

ToDo:
I want to create wildcard domains for both "alias-domains".

Problem:
It is not possible to create wildcard subdomains for both "alias-domains".

1. How to create wildcard-subdomains on "alias-domains"?
2. How do I disable Plesk to respond to every domain, which isnt covered by a wildcard?

View 6 Replies View Related

Plesk 12.x / Linux :: Outgoing Mail Control For Subdomains Does Not Function

Apr 7, 2015

Plesk 12.0.18 Update #38
Cloudlinux 6.6

Outgoing mail control functions properly for domains, but it does not count or limit subdomains.

For example, if you have a subdomain like:
sub.domain.tld

And an email account on that subdomain, like:
info@sub.domain.tld

Then outgoing mail limits are not applied to that subscription/domain/mail account. You are able to send more emails than the limit.

Also, if you go to:
-> Tools and Settings
-> Outgoing mail control

And try to see statistics for that subscription/domain/mail account, it shows that there are not sent emails, even if you have sent emails. Of course I checked it many hours after sending, or even the next days.

View 2 Replies View Related

Plesk 12.x / Linux :: Subdomains Redirect To Primary Domain After Repairing Installation

Jan 23, 2015

Up until a week ago we had some troubles with package dependencies on our dedicated server running on Ubuntu 14.04.1. Plesk was totally out of reach, displaying 502 Bad Gateway pages and some other weird error on login_up.php3.

I fixed the dependencies by removing a lot of packages (including Plesk) and finally managed to reinstall Plesk using the autoinstaller, then repaired it using "/usr/local/psa/bootstrapper/pp12.0.18-bootstrapper/bootstrapper.sh" (IIRC this whole bootstrapper folder was not present before reinstallation).

Now, after restoring our data from a backup pretty much everything works except for the subdomains. They all redirect to the primary domain's vhost (307 Redirect) for some reason.

"/var/log/apache2/access.log" shows the following after issuing a HTTP request to any subdomain:

Code:
<ip> - - [23/Jan/2015:23:15:31 +0100] "GET / HTTP/1.1" 307 244 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:35.0) Gecko/20100101 Firefox/35.0"
<ip> - - [23/Jan/2015:23:15:31 +0100] "GET / HTTP/1.1" 200 13397 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:35.0) Gecko/20100101 Firefox/35.0"

I have tried enabling and disabling nginx, it did not work. Then I just kept it disabled because it makes our forum think that everyone has the server's IP (because of the reverse proxy thing I assume).

Oh, and I should say: using HTTPS anywhere just gets me a 502 Bad Gateway error.

View 7 Replies View Related

Plesk 12.x / Windows :: Restoration Failed From 11.5 To Destination Server

Nov 25, 2014

We tried to restore the backup from source server 11.5 to destination server 12.0 , while uploading backup file to server repository & restoring it throws below error:

Internal error.The page cannot be displayed because an internal server error has occurred.

Error: Unable to upload the backup file (backup_nov23_******.com_info_1411230058.xml.zip). The file was modified, corrupted, created on another server or in an older Plesk version that does not support signing of backups. If you trust this backup, then select the "Upload backup files without valid signatures" option and repeat uploading.

Warning: The uploaded backup file (backup_nov23_**********.com_info_1411230058.xml.zip) was modified, corrupted, created on another server or in an older Plesk version that does not support signing of backups. Before restoring data from this backup file, make sure you can trust the source of this file.

We have excluded Plesk files from Antivirus as well but still we are facing the same error.

View 4 Replies View Related

Wildcard DNS Subdomains Working, But Existing Subdomains Not

May 7, 2007

I've set up the affiliate manager from jrox.com for a client of mine. This includes the setup of wildcard DNS so that each affiliate can have username.clientssite.com and have it count their clicks - which works properly.

What isn't working properly is that he also has forums.hissite.com, which is loading the main website page instead of his forums. He is using cpanel to add the subdomain, and it isn't failing, so I'm not sure what's going on with it.

Here is the relative section from the httpd file.

Quote:

<VirtualHost 74.53.106.146>
ServerAlias residualvictory.com
ServerAlias *.residualvictory.com
ServerAdmin webmaster@residualvictory.com
DocumentRoot /home/residual/public_html
BytesLog domlogs/residualvictory.com-bytes_log
ServerName www.residualvictory.com

User residual
Group residual
CustomLog /usr/local/apache/domlogs/residualvictory.com combined
ScriptAlias /cgi-bin/ /home/residual/public_html/cgi-bin/
</VirtualHost>

<VirtualHost 74.53.106.146>
ServerAlias www.forums.residualvictory.com
ServerAlias forums.residualvictory.com
ServerAdmin webmaster@forums.residualvictory.com
DocumentRoot /home/residual/public_html/forums
BytesLog domlogs/forums.residualvictory.com-bytes_log
ServerName forums.residualvictory.com

User residual
Group residual
CustomLog /usr/local/apache/domlogs/forums.residualvictory.com combined
ScriptAlias /cgi-bin/ /home/residual/public_html/forums/cgi-bin/
</VirtualHost>

And the bind file for his domain

Quote:

; Modified by Web Host Manager
; Zone File for residualvictory.com
$TTL 14400
@ 86400 IN SOA ns1.lucidic.com. root.lucid.lucidic.com. (
2007050705
86400
7200
3600000
86400
)

residualvictory.com. 86400 IN NS ns1.lucidic.com.
residualvictory.com. 86400 IN NS ns2.lucidic.com.


residualvictory.com. 14400 IN A 74.53.106.146

localhost.residualvictory.com. 14400 IN A 127.0.0.1

residualvictory.com. 14400 IN MX 0 residualvictory.com.

mail 14400 IN CNAME residualvictory.com.
www 14400 IN CNAME residualvictory.com.
ftp 14400 IN A 74.53.106.146
forums 14400 IN A 74.53.106.146
www.forums 14400 IN A 74.53.106.146
* 14400 IN A 74.53.106.146

View 10 Replies View Related

Plesk And Subdomains

Apr 7, 2007

I would like to do the following but on Plesk 8.1.0 for Windows:
[url]

How should I do it?

View 0 Replies View Related

Dynamic Subdomains In Plesk

Nov 2, 2008

im trying to set up a site for a client whereby they can add subdomains to their existing domain (http://test1.client.com/, http://test2.client.com/, etc.).

its a dedicated server with Plesk...can anyone point me in the right direction please?

ive searched these forums but havent come up with much, but maybe didnt search for the right terms, so my apologies if this has been answered before.

View 1 Replies View Related

Plesk 11.x / Windows :: SSL Does Not Work For Subdomains

Jul 5, 2015

How to enable subdomain? I do not work for subdomains SSL...

View 6 Replies View Related

Plesk 12.x / Windows :: Adding Subdomains - This Page Can't Be Displayed

Jan 17, 2015

Adding simple subdomain in plesk panel hosted on windows 2012, but browsing the subdomain returning:

This page can’t be displayed....

View 4 Replies View Related

Making Destination Unreachable

Aug 3, 2008

Hey heres what happens when i do a traceroute to amazon - over a maximum of 30 hops:

11 33 ms 35 ms 36 ms ae-7.ebr3.Atlanta2.Level3.net [4.69.134.22]
12 58 ms 53 ms 54 ms ae-2.ebr1.Washington1.Level3.net [4.69.132.86]
13 53 ms 53 ms 53 ms ae-81-81.csw3.Washington1.Level3.net [4.69.134.1
38]
14 47 ms 48 ms 47 ms ae-3-89.edge1.Washington1.Level3.net [4.68.17.14
4]
15 * * AMAZONCOM.edge1.Washington1.Level3.net [4.79.20.14] repo
rts: Destination net unreachable.

Trace complete.

Is there a way my server unreachable without installing a hardware firewall?

View 7 Replies View Related

Specifying A Destination Target For Pkgacct

Mar 29, 2007

to copy over 11+Gb of single account to another server and we have got only 7 GB space left on our home directory.

Is there a way by which we can specify a target directory to create the backup archive for the pkgacct script.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved