Web Hosting :: Might I Change From Fedora To CentOS In My New Servers

Suse, Debian, Fedora Or CentOS
I will be dropping my shared-hosting plan and ordering a small VPS as soon as I can decide on which operating sytem to use. It seems that most companies offer the following choices: Suse, Debian, Fedora and CentOS.

I freely admit that I am a full-fledged n00b when it comes to linux and will be learning as I go, the problem is I just don't know where to start because I'm not familiar with any of them. I have at least heard of Suse, Debian and Fedora before, but didn't even know this CentOS existed until yesterday... and yet, it seems to be one of the more popular choices.

So I was wondering if some of you seasoned VPS veterans here could recommend an OS, tell me what the differences are, or otherwise share any experience you might have with any of them.

View Replies! View Related

Difference Between Fedora Core & CentOS
Whats the Difference between Fedora Core & CentOS?

I think my host installed the wrong OS, but just wondering to see if it's worth changing the OS if they're both the same.

View Replies! View Related

Which Operating System Fedora Core, CentOS, FreeBSD
I currently run a dedicated with redhat 9 and am looking at a new server with either Fedora Core, CentOS, or FreeBSD.

I'd like your opinions on the best o/s to go with overall and also bearing in mind I'm coming from redhat and will be running cpanel on it...

View Replies! View Related

How Do I Setup A Ubuntu DomU Guest On A CentOS / Fedora Core XEN Server
how to install Ubuntu (either 7.10 or 8.04) as a XEN domU guest on a CentOS 5 / Fedora Core 8 XEN dom0 server?

I have tried installing Ubuntu as a fully virtualized guest, but the Ubuntu CD doesn't even bootup. I get the Linux bootloader, and that's it,it doesn't continue to boot. Odd.

When trying to install a Paravirtualized guest, I had to use the debootstrap method, but can't get it to boot up.

Quote:

xm create anya_zanet
Using config file "/etc/xen/anya_zanet".
Error: (2, 'Invalid kernel', 'xc_dom_find_loader: no loader found
')

This is the xen configuration:

Code:
kernel = "/boot/vmlinuz-2.6.23.1-42.fc8"
ramdisk = "/boot/initrd-2.6.23.1-42.fc8.img"
builder='linux'
memory = 256
name = "anya_zanet"
vcpus = 1
vif = [ 'bridge=xenbr0' ]
disk = [ 'phy:/dev/System/anya_zanet,hda1,w' , 'phy:/dev/System/anya_zanet,hda2,w' ]
root = "/dev/hda1 ro"
on_poweroff = 'destroy'
on_reboot = 'restart'
on_crash = 'restart'

how to get Ubuntu working on a CentOS / Fedora Core XEN server?

View Replies! View Related

CentOS, Debian, Fedora Core 3 & 4, Gentoo, Opensuse, Suse, Unbuntu?
Gazzin.com offers so many OSs on their VPS deals - CentOS, Debian, Fedora Core 3, Fedora Core 4, Gentoo, Opensuse, Suse, Unbuntu. Which one would you advise me to start from?

View Replies! View Related

How Change Language In CentOS
How change language in CentOS?

Code:
[root@serwer /]# locale
LANG=
LC_CTYPE="POSIX"
LC_NUMERIC="POSIX"
LC_TIME="POSIX"
LC_COLLATE="POSIX"
LC_MONETARY="POSIX"
LC_MESSAGES="POSIX"
LC_PAPER="POSIX"
LC_NAME="POSIX"
LC_ADDRESS="POSIX"
LC_TELEPHONE="POSIX"
LC_MEASUREMENT="POSIX"
LC_IDENTIFICATION="POSIX"
LC_ALL=
I don't have on my server file: /etc/sysconfig/i18n

Can one use command: locale LANG="pl_PL" ? - not working

Should you restart the system after the change of the language?

View Replies! View Related

How To Change Primary IP Address In Centos
I have centos VPS server, it's possible to change primary vps?

View Replies! View Related

How Can Change Primary IP Address In Centos
How can change server primary address in centos?

View Replies! View Related

How To Change All TTL`s At The Same Time On CentOS
We`ve a cPanel webserver, we are going to migrate accounts to another server, So require to decrease TTL of all accounts there, But that is hard to change them one by one.

Do you know how should I decrease all of those TTL`s at the same time with an special command?

Another thing is that, If we dont increase TTL`s after transfer and leave those to be about 300sec, Will that make any issues for us?

And what should a TTL be a large number (standard 86400)?

View Replies! View Related

Can't Change Time In Centos Dedicated Box
i have a centos cpanel 11 dedicated server, but the time at server is wrong and i can't sync it.

i try using rdate and it gave me error :

Code:
rdate: rdate: could not set system time: Operation not permitted

View Replies! View Related

Auto Time Change Centos On VPS VMWare
I'm using a CentOS 5 VPS server inside a VMWare Infrastructure environment. I don't know if that is relevant, but I have the following:

Every night my server with CentOS 5 changes its time back to +1 UTC. Strangely it happens every 0:00.

View Replies! View Related

How To Change Servers Document_Root
I've just had a server deployed for one of my private sites which uses "DOCUMENT_ROOT".

At the moment the server thinks the root is "/usr/local/apache/htdocs" instead of "/home/usersaccount/public_html" how can I change this so every account setup points to the correct document_root?

Running the latest cPanel build from the stable tree.

View Replies! View Related

Make Change On 50+ Windows Servers At The Same Time
I don't use anything like active directory to manage my windows servers. I just manage them individually.

I need to make a change to terminal services configuration on all of them. I don't want to login to each one and manually edit it.

How the hell can I do this in Windows?

In Linux i could knock up a script in about 5 minutes with expect that would login to every single one and make the change i wanted.

View Replies! View Related

Change Name Servers In Domain Name Server (DNS) Zone
i have question from dns zone name servers !

example my name server is : ns1.myserver.com

i change my server to iweb tech and i do not change ns1.privatedns.com to ns1.myserver.com in Basic cPanel/WHM Setup before trnasfer my accounts !

now my accounts do not work good !

some time they load from ns1.myserver.com and some time load from ns1.privatedns.com
privatedns not worked so some times my sites do not load !

how can i change ns1.privatedns.com to ns1.myserver.com for my account in their dns zone !

View Replies! View Related

Debian Or Centos For Servers
which is best for running a server? debian or centos?

i have seen many companies prefer using centos for running servers quite often. Any specific reason for that or am i missing something here.

View Replies! View Related

Centos & Mail Servers(futurehosting)
i'm running a forum and a few other things on a futurehosting VPS plan which is running centos.

we changed to futurehosting because our shared hosting was definately not coping with it, so we had to make a quick changeover... unfortunately i dont have too much experience with setting up mailservers in linux(which seems to be a massive complicated mess involving a million different services).

i'm wondering if anyone knows any guides to setting up a mail server + have a managable web interface to add user accounts/setup forwarding rules and such that works well with centos?

or better yet, is futurehosting capable of doing it for me

View Replies! View Related

Best File Sharing Method Between CENTOS/LINUX Servers
What is the best way to share files/folders between centos/linux servers?

View Replies! View Related

Change Host, Change Domain And Getting Search Engines Up To Speed
Has anyone helped clients transition from one domain to another? Maybe dissolving a partnership or renaming their company... so a new domain name has been registered and a new website created.

2 Issues:

#1 Using .htaccess 301 redirect
We used the following command line in their old website's htaccess file

Redirect 301 / [url]

The goal was to get people try to visit any page of their old website (i.e. OldWebsite.com/contact.html) redirected to their new website (i.e. NewWebsite.com/contact.html). Isn't that supposed to change the address bar's URL, too? For some reason, I visit their old site and I seem to be redirected to their new website but the address bar still has their old domain name? Something is going on???

#2 Having their new company name for 2 years now. People can enter her new company name in Google, MSN or Yahoo. Her new company name appears in the search results but has the old domain name associated with it. We are trying to get rid of any reference to that old domain name? What's the easiest way to do this? So what people see in search engines is:

New Company
Short Meta Description
www.OldDomain.com

What steps did I miss in this transition?

What steps do I have to take on their old website/old web server to control it's appearance on search engines and make sure people get to the new website?

View Replies! View Related

Fedora
i have some problems regarding fedora

1/How to change the language of fedora, for example from france to english

2/how to bring out the post installation configuration screen? any commmands? i want to change the firewall setting

View Replies! View Related

Directadmin On Fedora 9
Anybody having problems installing directadmin on Fedora 9?

Right after I run the install, it does start downloading the packages but experiencing this issue after numerous tries:

100%[=====================================================================>] 2,769 --.-K/s in 0.07s

2008-09-03 13:47:29 (40.2 KB/s) - `/var/named/named.ca' saved [2769/2769]

Installation didn't pass, halting install.

View Replies! View Related

Fedora 5 Server
i have problem in my linux server that i have aserver with 5.2.4 apache and many scripts not working after that i upgraded to php 4.4.7 so all scipts all over my server are working but not loging with any user and pass just as u make refresh to the page
this problem in all forums and scripts in my server i need quickly solution please
my customers are confused

View Replies! View Related

Upgrading To Fedora Core 11
I have a linux server that has active clients on it, its running Fedora Core 4 and I beleive its time to upgrade to the latest Fedora Release.

The server is running cPanel, has anyone here done an upgrade to a box running Fedora before? Any tips or tricks?

I'm hoping its a simple attend data center, reboot server with new Fedora DVD, boot off DVD select upgrade and away we go. . .

View Replies! View Related

Yum Problem On Fedora 5
I am having a problem with YUM on Fedora 5, for a long time it has not worked saying there is nothing to update when I know there is, I have tried to correct this by following a forum post of someone having the same problem, now I have really messed things up...

When I type any yum command (yum, yum --version, yum check-update etc) I get the following error:

Traceback (most recent call last):
File "/usr/bin/yum", line 28, in ?
import yummain
File "/usr/share/yum-cli/yummain.py", line 29, in ?
from yum import logginglevels
ImportError: cannot import name logginglevels

perhaps removing it and installing the latest version of Yum would help however tried that and it seems to make no difference, perhaps I am doing it wrong?

View Replies! View Related

PHP 5.1 To 5.2 On Fedora Core 5
I have a Fedora Core 5 VPS currently running PHP 5.1.6, and wish to upgrade to 5.2 so I can run Magento eCommerce software.

I've managed to install yum, and after running yum update php, it just updates to 5.1.x still

My understanding of it currently is I need to point it to new repositories with 5.2 in?

View Replies! View Related

MySQL Not Installing On Fedora
Here is where I stand..

OS: FRESH install of Unix Fedora Core 6
Kernel Version: Kernel 2.6.18-1/2798.fc6 on an i686
Hardware Information: Brand new Dell SC1435 Server
Software Version: MySQl 5
Control Panel: cPanel

A few things I did already..

#yum install mysql-server && service mysqld start
Nothing to do
mysqld: unrecognized service

#rpm -qa | grep mysql
libdbi-dbd-mysql-0.8.1a-1.2.2
mysql-connector-odbc-3.51.12-2.2

#ps -ef | grep -i mysql
root 15299 15114 0 16:55 pts/0 00:00:00 grep -i mysql

I don't see the mysql.sock file. What I can do to further troubleshoot this issue?

View Replies! View Related

Editor In Fedora Code 6
My server was just upgraded to FC6 and now I do not have pico for a editor. I found nano but there is problems. Screen does not refresh correctly and when I type in charaters sometimes extra charaters show up.

Are there any other screen editors built in to FC6 (not vi)

View Replies! View Related

Fedora Core 6 Compatibility
I have bought a
PowerEdge 2900 Quad-Core Xeon E5345 2.33 Ghz Processor
2GB FB 667MHz Memory
146 GB SAS hard drive
PERC 5/i integrated RAID Controller Card

I have installed Fedora Core 6 on this.But somehow it fails to work.It keeps hanging anytime anywhere.

Can anybody help me know whether this is compatible with each other?

I tried closing some services and work it,but the attempt was in vane.

I have googled alot over this and cant get it worked.

I also tried to install from different CDs,but no luck.

View Replies! View Related

Setting Up LAMP (Fedora 7)
get my development box set up running LAMP. I have Fedora 7 currently installed but don't really know much about setting up the environment to host multiple sites (development purposes only), getting Phpmyadmin set up, etc. I'm used to typically doing my dev with with apache2triad on Windows but would much rather be working on a Linux box for development as i do my hosting in a Linux environment as well.

View Replies! View Related

Install Cpanel On Fedora
i have fedora core 4

i run sh latest

but take me error :

____ _
___| _ __ _ _ __ ___| |
/ __| |_) / _` | '_ / _ |
| (__| __/ (_| | | | | __/ |
\___|_| \__,_|_| |_|\___|_|

Installer Version 11.4.0

grep: /etc/yum.conf: No such file or directory
grep: /etc/yum.conf: No such file or directory
Your operating system's rpm update method (yum) was not able to locate the glibc package. This is an indication of an improper setup. You must correct this error before you can proceed.

View Replies! View Related

4 G RAM Not Detected By Fedora 7
We recently setup a server with 4 gigs of RAM and installed Fedora core 7 32-bit version in it. After installing the OS, I have found that Fedora is able to detect only 2 GB and not 4 GB of RAM. I installed the kernel-PAE and kernel-PAE-devel modules and restart the server and made sure that the the OS with the PAE switch starts at boot time. However, the OS still does not detect the 4 GB RAM. Any idea what else can be done apart from installing the 64-bit OS in the system?

View Replies! View Related

How To Install FFMPEG On Fedora Core 4
i want to install FFMPEG on my server , i tried to install from here http://vexxhost.com/blog/category/ffmpeg/

but i got error in step no. 6 , put in your consideration i didn't do the step no. 5
coz my OS is Fedora core 4.

plz any one have the right way to install , tell me.

View Replies! View Related

Settings Environment Variable In Fedora
I have a Fedora Linux server and I am trying to set:
PEAR=/home/pear/bin/pear

but when I try to set it under env or in a .profile file under home it still doesn't work. I even log off and log back in and I can't just run
PEAR

View Replies! View Related

Setup Ispconfig On Fedora Core 6
i try to install ispconfig panel con my vps fedora core 6

but i see this error

checking for MySQL support... yes
checking for specified location of the MySQL UNIX socket... no
checking for MySQL UNIX socket location... no
configure: error: Cannot find MySQL header files under /usr/local/lib/mysql.
Note that the MySQL client library is not bundled anymore!
ERROR: Could not configure PHP
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
[root@vps198 install_ispconfig]#

how i fix this problem and install the ispconfig?

View Replies! View Related

Probs Upgrading To Fedora 5 From 4--Yes, I Know I Am Late In Doing So
I tried to upgrade to fedora 5 and then to whatever is next, but I am having problems. After running yum -y update I get this:

Error: hwdata conflicts with pcmcia-cs
Error: Missing Dependency: hotplug >= 2001_04_24-9 is needed by package pcmcia-cs
Error: Missing Dependency: howl = 0.9.8 is needed by package howl-libs
Error: Unable to satisfy dependencies
Error: Package hal needs kernel < 2.6.15, this is not available.
Error: Package hwdata needs pcmcia-cs, this is not available.
Error: Package howl-libs needs howl = 0.9.8, this is not available.
Error: Package pcmcia-cs needs hotplug >= 2001_04_24-9, this is not available.
Error: Package kudzu needs kernel < 2.6.13, this is not available.
Error: Package glibc needs kernel < 2.6.9, this is not available.
Error: Package initscripts needs kernel < 2.6.12, this is not available.

View Replies! View Related

Hardware: Db Servers, Web Servers, File Servers. Cpu, Ram, Disk
I have a lot of questions here so if you can't answer them all I understand. even pointing me somewhere where I could get the answers would be appreciated; hardware sites focusing on server hardware, forums focusing on such, etc.

we plan to have three different types of servers:

- db server (self explanatory. mysql. for forums, mysql driven sites.)

- file server (lots of files around ~2-10MB, consistant 70mbps right now, but we want more room for upgrades. needs a LOT of storage room.)

- web server (lots of php files, but also static things like plain html, images, etc. also includes all misc services for the setup-- dns, etc.)

could I be given a rundown for which hardware each of the three should have? I don't need specifics, even just knowing that more ram is important here while cpu doesn't matter as much, or that the fastest disks available are a must, etc would all be valuable info for me. despite that, I certainly wouldn't mind specific hypothetical hardware configs.

for the database server I'm assuming the more ram the better. not entirely sure about the cpu? also not positive on disks...

for the fileserver, how much ram would be practical or useful? disk io will be an issue I'm because plenty of people will be pulling files at once so the disk needs to read from multiple places. scsi (and even raptors) are not an option as we need 750GB+ of space on a reasonable budget. more ram will take some load of of the disks, but how much is neccessary / reasonable?

for the web server I'm assuming cpu first, then ram, but it'll likely need less ram than the db server?

I'm more lost on the disks than anything. scsi on the fileserver is not an option under any circumstances due to $/GB. for the db & web server I'm willing to pay for scsi if the performance increase really does warrant the extra money, but I'd like to be convinced before shelling it out. if you have benchmarks geared at server hardware when it comes to disks I'd really appreciate it.

also, what's the best way to network these together when colocated? each one with a dual gigabit ethernet port and then the communications go to and from the router?

View Replies! View Related

How To Upgrade Fedora Release On Old OpenVZ Vps?
On my desktop I keep up with the Fedora life cycle by upgrading via DVD every six months or so, and I am currently running Fedora 9. By contrast, my hosted VPS based on OpenVZ/CentOS is still providing me with a Fedora Core 5 virtual environment. I used to keep up with FC5 updates via yum until FC5 maintenance ended, long ago. Question: is it possible to upgrade from Fedora Core 5 to Fedora 9 via yum and without any intervention on the current underlying VE by the VPS host? If so, how would I do that?

View Replies! View Related

To Take Data From Mounted 2 Disk Fedora Cpanel
I've got a problem with one of my servers, and i dont now how to do it. I need to find a technical service that I could hire for a job.

It's a small job. I've got one server that was compromised by D.O.S. atack and taken down by hosting company they did a clean instal fedora and cpanel and said that the data would be mounted on a old drive I need to restore the webs about 30 small sites
Would anyone suggest a person that could do that?

View Replies! View Related

Kernel Upgrade On Fedora Core 4 Server
I have a server running Fedora 4 and WHM/cPanel. I would like to upgrade the linux kernel to the latest version, so mosey in via SSH and type "yum -y upgrade". It downloads a few things and tells me everything is hunky dory.

Now, the version it says it is currently running is: 2.6.17-1.2142_FC4 #1 Tue Jul 11 22:41:14 EDT 2006

Is that the really the newest version available? Maybe I'm confused as to how this works, but if I go to kernel.org it tells me the most recent stable version of the kernel is 2.6.24.3. Is this because I am running FC4?

View Replies! View Related

DNS Is Down On Fedora Core 5 & Rndc
I have a problem with one of the servers since the morning, DNS is down and trying to start it giving failed message.

I'm using Fedora 5
CPanel 10.9.0-S119
named (9.3.3rc2) with installed Packages: bind-9.3.3-0.2.rc2.fc5 / bind-devel-9.3.3-0.2.rc2.fc5 / bind-libbind-devel-9.3.3-0.2.rc2.fc5 / bind-libs-9.3.3-0.2.rc2.fc5 / bind-utils-9.3.3-0.2.rc2.fc5 / binutils-2.16.91.0.6-5
kernel-2.6.18-1.2257.fc5

Error Message:

Quote:

root@server [~]# service named start
Starting named:
Error in named configuration:
zone alexaian-d.com/IN: loaded serial 2006040201
zone al-jan.org/IN: loaded serial 2006073101

named.conf file

Quote:

root@server [~]# cat /etc/named.conf
include "/etc/rndc.key";

controls {
inet 127.0.0.1 allow { localhost; } keys { "rndckey"; };
};

options {
};

zone "alexaian-d.com" {
type master;
file "/var/named/ahmed-d.com.db";
};

zone "al-jan.org" {
type master;
file "/var/named/al-jinan.org.db";
};

rndc: connect failed: 127.0.0.1#953: connection refused

Quote:

root@server [~]# service named status, I'm getting the error:
rndc: connect failed: 127.0.0.1#953: connection refused

View Replies! View Related

Fedora (Core 6) And Creating Partions For CPanel
I am doing a FRESH install of Fedora Core 6 onto a brand new server. I have 2 questions about partitions on there..

1. Should all the partitions (/home, /backup, /var etc..) be of file system type "ext3?" I could not find any documentation on this anywhere.

2. A question about about LVM (Logical Volume Management). Are you supposed to create a different LVM for each partition? Or just for /tmp?

View Replies! View Related

Installing Httpd-devel Module On Fedora Updates Apache
to install mod_evasive module on our Apache2 that runs on Fedora server. However, for that we need Apache's apxs to compile it. We found out that we can do that by running the

yum install httpd-devel
However, when we run that, we get the following:

=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
httpd-devel i386 2.2.8-1.fc7 updates 144 k
Updating:
httpd i386 2.2.8-1.fc7 updates 1.0 M
openldap i386 2.3.34-7.fc7 updates 291 k
Installing for dependencies:
apr-devel i386 1.2.8-6 fedora 170 k
apr-util-devel i386 1.2.10-1.fc7 updates 54 k
cyrus-sasl-devel i386 2.1.22-8.fc7 updates 351 k
db4-devel i386 4.5.20-5.fc7 fedora 2.3 M
expat-devel i386 1.95.8-9 fedora 129 k
openldap-devel i386 2.3.34-7.fc7 updates 1.5 M
Updating for dependencies:
httpd-manual i386 2.2.8-1.fc7 updates 821 k
mod_ssl i386 1:2.2.8-1.fc7 updates 85 k
openldap-clients i386 2.3.34-7.fc7 updates 179 k

Transaction Summary
==========================================
Install 7 Package(s)
Update 5 Package(s)
Remove 0 Package(s)

Total download size: 7.0 M
We're kind of cautios, because we have never updated Apache on our live server. We'd prefer if we could download and install just the httpd-devel module. Is this possible?

If not, would this mess up any of our existing configuration? Could we expect any problems? And do we need to shut Apache down, then run the updates and only then restart it?

View Replies! View Related

Fedora (realtek Rtl8139/810x Family Fast Ethernet Nic)
I am testing FEDORA on my localhost server, with dual partition with windows 2003 server,

The problem is, that FEDORA can not install NETWORK CARD driver by default or by selection.

In my Windows device manager i see i am using (realtek rtl8139/810x family fast ethernet Nic), but i can not find its driver to use on linux (fedora)

Can someone guide me how can i make (realtek rtl8139/810x family fast ethernet Nic) use on FEDORA installation.

i have tried searching google ... but can not find linux driver for same...

View Replies! View Related

Installation Zend Optimizer & Ioncube On Fedora Core 4 Using Plesk 8.2
i got plesk 8.2 installed on my fedora core 4 server. I would like to install ioncube & zend optimizer.

Anyone can explain me stepwise how to do..

i read many post on the forum about it but i have not succeded in..

here is the infos of my server system info:

CPU:GenuineIntel, Intel(R) Xeon(TM) CPU 2.80GHz
Version: psa v8.2.0_build82070706.15 os_FedoraCore 4
OS: Linux 2.6.9-023stab033.9-enterprise
Key number: PLSK.00000000.000

component info:
awstats6.6-0.060916beta.swsoft bind9.3.1-20.FC4 coldfusionComponent was not installed coldfusion-supportComponent was not installed courier-imap3.0.8-fc4.build82070706.15 drweb4.33-rh5_psa drweb-qmail4.33-fc4.build82070706.15 frontpage5.0.2.2635-1.fc4.swsoft httpd2.0.54-10.4.1.swsoft mailman2.1.8-0.FC4.1 mod_perl2.0.1-1.fc4 mod_python3.1.4-2 mysql4.1.20-1.FC4.1 perl-Apache-ASP2.59-fc4.build82070706.15 php5.0.4-10.5.1.swsoft postgresql-serverComponent was not installed psa8.2.0-fc4.build82070706.15 psa-api-rpc8.2.0-fc4.build82070706.15 psa-autoinstaller3.2.0-build32070705.20 psa-backup-manager8.2.0-fc4.build82070706.15 psa-horde3.1.4-fc4.build82070706.15 psa-imp4.1.4-fc4.build82070706.15 psa-logrotate3.7-fc4.build82070706.15 psa-manual-custom-skin-guide8.2.0-fc4.build82070706.15 psa-migration-manager8.2.0-fc4.build82070706.15 psa-mivaComponent was not installed psa-mod-fcgid-configurator1.0-13 psa-proftpd1.3.0-fc4.build82070706.15 psa-qmail1.03-fc4.build82070706.15 psa-qmail-rblsmtpd0.70-fc4.build82070706.15 psa-rubyrails-configuratorComponent was not installed psa-spamassassin8.2.0-fc4.build82070706.15 psa-tomcat-configurator8.2.0-fc4.build82070706.15 psa-turba2.1.4-fc4.build82070706.15 rubyComponent was not installed samba3.0.23a-1.fc4.1 spamassassin3.0.6-1.fc4 SSHTerm0.2.2-fc4.build82070706.15 tomcat5.0.30-5jpp_6fc webalizer2.01_10-28

info when doing uname -a:

Linux xxx.xxxxx.xx 2.6.9-023stab033.9-enterprise #1 SMP Tue Dec 5 14:40:57 MSK 2006 i686 i686 i386 GNU/Linux

info when doing php -v:

PHP 5.0.4 (cli) (built: Nov 9 2005 09:19:53)
Copyright (c) 1997-2004 The PHP Group
Zend Engine v2.0.4-dev, Copyright (c) 1998-2004 Zend Technologies

Info when doing httpd -v:
Server version: Apache/2.0.54
Server built: Jul 31 2006 15:02:04

I struggled many times to be able to set up the ioncube & zend optimizer but in vain..

View Replies! View Related

Difference Between CentOs 5.0 And Centos 4.5? Both With Plesk
What is the difference between CentOs 5.0 and Centos 4.5? (Both contains Plesk)

Would CentOS 5 contain more updates and fixes? CentOS 4.5 be more stable?

View Replies! View Related

Upgrading From Centos 4.6 To Centos 5.2
Does it worth to upgrade cent os to latest version on server where is installed whm/cpanel?Could i request upgrade from cpanel support ?

View Replies! View Related

Load Balancing 2 Web Servers And 2 MySQL Servers
I was wondering if it is possible to cluster 2 web servers and 2 mysql servers with only one server working as load balancer.

I am planning to use LVS (ldirectord and heartbeat).

Let's say I have 3 IPs allocated to the load balancing server.

111.222.111.222 (Main IP)
111.222.111.223 (Web Load Balancing IP)
111.222.111.224 (MySQL Load Balancing IP)
If a connection is made to .223 it would pass the request to one of the web nodes.
If a connection is made to .224 it would pass the request to one of the MySQL nodes.

Is it possible to do this?

If not, can I run, for example, nginx on 223 IP address to provide forward proxy? (Then it would not be able to HA but the main point is to load balance so)

Also, what would be the best way to keep the data same on both web servers? This is a web cluster for a very high traffic forum with a lot of uploads every hour so it has to do real time synchronization. I heard that DRDB is only one way and not two way so I'm not going to be able to use this.

View Replies! View Related

Send Mail To Another Servers But We Cant Recieve Mails Another Servers
We send mail to another servers but we cant recieve mails another servers. We can't recieve with webmail and outlook.

I look logs but there is no error and our ip is not in blacklist.

there is the error in our server

[url]

linux cpanel centos 4.6

View Replies! View Related

Renting Colocated Servers As Dedicated Servers
I am just colocating servers and managing them myself, and renting services off of them. In the future I would like to start offering dedicated servers as well. I am wondering if many companies do this, or if its more of a general practice to just setup as a reseller? The worst part that comes to mind is thinking of how to do billing for the bandwidth per month. With my setup I would only be offering flat bandwidth packages (like 2TB a month) but even so, I cant think of anyway to automate it so WHMCS knows if they went over, if so, how much, etc.

View Replies! View Related