Measuring TCP Retransmits As A Symptom Of Packet Loss
Jul 6, 2008
a tool that can measure how much packet loss we are having on a given server by looking at the packets being sent from it. I.e, something than looks at all TCP/80 connections and measures how many packets and bytes are being retransmitted vs actual packets and bytes sent.
This documents explains it:
[url]
We need this to measure network performance of different hosts where we have dedicated servers. This would be a good way of measuring performance with the actual data of our users.
Does anyone know of such tool? I.e, something that can say
2532 packets/second - 132 retransmits/second (4.8%)
25.43Mbps/sec total traffic - 24.84 Mbps/sec actual data sent - 0.59Mbps retransmits
Even better if it can then break it out on IP prefixes. like
192.0/16: 0.2% retransmits
192.1/16: 3.2% retransmits
192.2.16: 0.3% retransmits
192.3/16: 22.5% retransmits
192.4/16: 0.3% retransmits
This would be a good indicator of connectivity between the host where the tests are ran and other specific hosts.
View 2 Replies
ADVERTISEMENT
Mar 15, 2007
I am noticing some packet loss on one of my boxes, most notably when i'm accessing the webmail (however i'm pretty sure it's not that)
Can anyone offer some tips as to how to nail this down?
View 3 Replies
View Related
Dec 23, 2007
I have a dedicated windows 2003 server at a colocation facility that i use for game server hosting. Over the past 7 months, packet loss has become horrible with random periods of massive lag. My host says it's something on my end. I use a firewall with SPI enabled. Could that be causing it?
Strange thing is, the first few months my server was at that colo, they only had around 40 other servers on a single OC-192 pipe and i never had packet loss despite having the same SPI firewall. But now they have over 300 servers on the same OC-192 pipe. Could the packet loss be caused by my SPI firewall or them overloading the network with servers?
View 0 Replies
View Related
Jun 10, 2009
Basically I registered with a new host. They sent me the details with obviously includes the IP address. I tested the IP address on just-ping.com and it came back with all of them having between 80% to 100% packet loss. Surely this is not normal is it? I havent moved my domain yet but it doesnt look good does it? Should I cancel?
View 14 Replies
View Related
Jul 11, 2008
Anyone else experiencing packet loss with a GoDaddy VDS?
I'm in the 208.109.93 subnet.
--- google.com ping statistics ---
200 packets transmitted, 53 received, 73% packet loss, time 199086ms
rtt min/avg/max/mdev = 41.970/42.813/46.022/0.994 ms
View 1 Replies
View Related
Dec 11, 2007
with two 3com 3870 switches.
Our setup looks like this
Computer A (GigE) Switch 1 (gigE) Media Converter (Fiber Run) Media Converter (gigE) Switch 2 (gigE) Computer B
We have a cross connect in our data center that uses media converters (fiber) to regular 1000FD on each end.
Each end of the 1000FD handoff is plugged into port 1 of the 3870's (switch 1 and switch 2).
Pinging from Computer A to Computer B we receive a 50% packet loss.
Pinging from Computer B to Switch 1, no packet loss.
Pinging from Computer A to Switch 2, 50% packet loss.
Looking in the interface, the port 1's on each switch auto negotiate to 1000FD, however flow control shows as off.
We asked our data center to run tests on the media converts and fiber runs and everything comes back 100% fine. Has anyone seen a weird issue like this before with 3com switches not playing nicely with media converters?
I have no clue whats going on and our data center said the fiber run/media converter is fine... [url]
View 5 Replies
View Related
Jul 9, 2007
I have smokeping monitoring my game servers and so far in the little time that it has been running all my game servers have been encountering an average of 4 to 10% packet loss. Are there are tweaks i can run on the server computer to reduce packet loss? (registry modifications, etc.)
I downloaded a TCP tweak program called "TCP Optimizer" is it safe to run on a Windows 2003 Server OS?
The colo connection is an OC 192 and i have a 100Mbit ethernet card.
Here are my current TCP settings:
Quote:
[SYSTEMCurrentControlSetServicesTcpipParameters]
TcpWindowSize=-1
GlobalMaxTcpWindowSize=-1
EnablePMTUDiscovery=-1
EnablePMTUBHDetect=-1
SackOpts=-1
DefaultTTL=-1
TcpMaxDupAcks=-1
Tcp1323Opts=-1
DisableUserTOSSetting=-1
DefaultTOSValue=-1
[SYSTEMCurrentControlSetServicesAfdParameters]
DefaultReceiveWindow=-1
[SoftwareMicrosoftWindowsCurrentVersionInternet Settings]
MaxConnectionsPerServer=-1
MaxConnectionsPer1_0Server=-1
[SYSTEMCurrentControlSetServicesICSharingSettingsGeneral]
InternetMTU=-1
[SOFTWAREMicrosoftWindowsCurrentVersionExplorerRemoteComputerNameSpace{D6277990-4C6A-11CF-8D87-00AA0060F5BF}]
{D6277990-4C6A-11CF-8D87-00AA0060F5BF}=-1
[SYSTEMCurrentControlSetServicesDnscacheParameters]
MaxNegativeCacheTtl=-1
NegativeCacheTime=-1
NetFailureCacheTime=-1
NegativeSOACacheTime=-1
[SOFTWAREPoliciesMicrosoftWindowsPsched]
NonBestEffortLimit=-5
[SYSTEMCurrentControlSetServicesTcpipServiceProvider]
LocalPriority=499
HostsPriority=500
DnsPriority=2000
NetbtPriority=2001
[SystemCurrentControlSetServicesLanmanServerParameters]
SizReqBuf=-1
[SYSTEMCurrentControlSetServicesNdisWanParametersProtocols]
ProtocolMTU=-2
[SYSTEMCurrentControlSetServicesTcpipParametersInterfaces{D63AC0FA-D2C9-4D83-B057-31A353516AB3}]
MTU=-1
TcpWindowSize=-1
[SYSTEMCurrentControlSetServicesPschedParametersAdapters{D63AC0FA-D2C9-4D83-B057-31A353516AB3}]
NonBestEffortLimit=-2
[SYSTEMCurrentControlSetServicesTcpipParametersInterfaces{8190D94A-3B2D-45C4-998D-312E99D6061D}]
MTU=-1
TcpWindowSize=-1
[SYSTEMCurrentControlSetServicesPschedParametersAdapters{8190D94A-3B2D-45C4-998D-312E99D6061D}]
NonBestEffortLimit=-2
View 11 Replies
View Related
May 17, 2009
I have a home CentOS server and here is my issue
When I try to connect to it via SSH its laggy and often times out. I also notice packet loss.
My home network is 100 Mbps and the router is a crappy netgear WPN824 V3
View 8 Replies
View Related
Nov 3, 2007
Recently I have been having this problem with two high traffic servers on two different network.
Both servers are Quad-Core Xeons with CentOS 4.5 x86_64 and they are on 100mbps full duplex network. Software configuration is Nginx+Apache+MYSQL control panel is Directadmin.
The servers are serving lots static files and some php scripts.
When the servers start push near or over 30mbps, there will be packet loss when I ping them. around 5% loss, push more bandwidth the more packet loss. I have checked all the log files, I don't see any unusual errors.
Server Load is fine. The NICs were on 100mbps full-duplex mode.
The datacenters claim the networks were fine and all the other servers running on the same switches were fine with no packet loss.
View 8 Replies
View Related
Mar 19, 2007
I'm trying to find out why a single interface is causing packet loss on my entire network.
The network consists of four 2924's trunked to a 3550. I have about 20 vlans and a single default route for all traffic my uplink.
The network is perfect until I enable a single server. After I issue a 'no shut' on the interface packet loss is anywhere from 5% to 20% for anything going through the 3550 or even pings from the 3550 to other switches or the uplink.
Here's the statistics/settings of the interface after 1 minute of activity:
Code:
interface FastEthernet0/1
description 228
switchport access vlan 58
switchport mode dynamic desirable
speed 100
duplex full
spanning-tree portfast
FastEthernet0/1 is up, line protocol is up (connected)
Hardware is Fast Ethernet, address is 0014.f2e6.df01 (bia 0014.f2e6.df01)
Description: 228
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 6/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is 10/100BaseTX
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters 00:01:01
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 2536000 bits/sec, 924 packets/sec
5 minute output rate 341000 bits/sec, 469 packets/sec
60922 packets input, 21630544 bytes, 0 no buffer
Received 0 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 2 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
31585 packets output, 2859788 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
Transmit FastEthernet0/1 Receive
3583183 Bytes 27018085 Bytes
39516 Unicast frames 76403 Unicast frames
46 Multicast frames 0 Multicast frames
0 Broadcast frames 0 Broadcast frames
0 Discarded frames 0 No dest, unicast
0 Too old frames 0 No dest, multicast
0 Deferred frames 0 No dest, broadcast
0 1 collision frames
0 2 collision frames 0 FCS errors
0 3 collision frames 0 Oversize frames
0 4 collision frames 0 Undersize frames
0 5 collision frames 0 Collision fragments
0 6 collision frames
0 7 collision frames 4355 Minimum size frames
0 8 collision frames 56237 65 to 127 byte frames
0 9 collision frames 1205 128 to 255 byte frames
0 10 collision frames 14 256 to 511 byte frames
0 11 collision frames 67 512 to 1023 byte frames
0 12 collision frames 14528 1024 to 1518 byte frames
0 13 collision frames
0 14 collision frames 0 Flooded frames
0 15 collision frames 3 Overrun frames
0 Excessive collisions 0 VLAN filtered frames
0 Late collisions 0 Source routed frames
0 Good (1 coll) frames 0 Valid oversize frames
0 Good(>1 coll) frames 0 Pause frames
0 Pause frames 0 Symbol error frames
0 VLAN discard frames 0 Invalid frames, too large
0 Excess defer frames 0 Valid frames, too large
0 Too large frames 0 Invalid frames, too small
3672 64 byte frames 0 Valid frames, too small
34066 127 byte frames
2152 255 byte frames
110 511 byte frames
38 1023 byte frames
28 1518 byte frames
CPU utilization for five seconds: 13%/3%; one minute: 12%; five minutes: 9%
77 1317620 3220725 409 9.27% 8.35% 6.20% 0 IP Input
How does 1400 packets/second (4mbits) cause my 3550 to drop packets?
View 14 Replies
View Related
Aug 1, 2009
I am facing high ping and packet loss issues with a server hosted at hetzner.de (CentOS + WHM)
For some unknown reason pings go high and stay like this (average 1500ms) until I reboot the server.
Here is a screenshot of tracert from server to me: [url]
View 15 Replies
View Related
Mar 8, 2008
I recently switched over to SoftLayer for dedicated hosting and the servers are great. However we've been getting hit on and off with massive (50-80%) packet loss, which has been crippling our performance and causing all sorts of problems
I put in a support ticket and they linked me to the Internet Health Report website and said it was due to one of their bandwidth providers (I think Global CrossinG) and not on their internal network and to be patient as it could take time to resolve
Are any other SoftLayer customers going through this? Is this an unusual occurrence? I feel like if it was really one of their partners that it would be affecting a lot of their customers and it would be a high priority issue right?
I'm kind of stuck on what to do; I just invested a lot of energy into moving content onto these new servers and am concerned about whether to wait it out or whether to start finding a new company. This kind of packet loss is really unacceptable...
View 14 Replies
View Related
Jun 10, 2008
root@server [~]# tail -f /var/log/messages
Jun 10 14:14:49 server kernel: printk: 56 messages suppressed.
Jun 10 14:14:49 server kernel: ip_conntrack: table full, dropping packet.
Jun 10 14:14:54 server kernel: printk: 59 messages suppressed.
Jun 10 14:14:54 server kernel: ip_conntrack: table full, dropping packet.
Jun 10 14:14:59 server kernel: printk: 85 messages suppressed.
Jun 10 14:14:59 server kernel: ip_conntrack: table full, dropping packet.
Jun 10 14:15:04 server kernel: printk: 90 messages suppressed.
Jun 10 14:15:04 server kernel: ip_conntrack: table full, dropping packet.
Jun 10 14:15:09 server kernel: printk: 58 messages suppressed.
Jun 10 14:15:09 server kernel: ip_conntrack: table full, dropping packet.
Jun 10 14:15:14 server kernel: printk: 70 messages suppressed.
Jun 10 14:15:14 server kernel: ip_conntrack: table full, dropping packet.
Jun 10 14:15:19 server kernel: printk: 193 messages suppressed.
Jun 10 14:15:19 server kernel: ip_conntrack: table full, dropping packet.
Anyone know what this is about?
Using Centos / Cpanel
Linux server.domain.com 2.6.9-67.0.15.ELsmp #1 SMP Thu May 8 10:52:19 EDT 2008 i686 i686 i386 GNU/Linux
root@server [~]# sysctl net.ipv4.netfilter.ip_conntrack_max
net.ipv4.netfilter.ip_conntrack_max = 65536
I ran this in the meantime.
sysctl -w net.ipv4.netfilter.ip_conntrack_max=72000
View 7 Replies
View Related
Jan 22, 2007
I'm unresting noticing lately in 'top' that there're users represented as numbers using 'php' without any increase in server's load or connection flooding ..
PHP Code:
6079 32056 18 0 0 0 0 Z 5 0.0 0:00.14 php <defunct>
6081 root 19 0 10136 3836 2792 S 1 0.2 0:00.04 exim
8011 root 17 0 3400 1064 760 S 1 0.1 1:06.31 top
31076 nobody 15 0 7900 3404 1188 S 0 0.2 0:00.03 httpd
1017 root 16 0 4416 1336 1100 S 0 0.1 0:00.02 rc
..........
I get 'rootkithunter' reporting similar number-users too
PHP Code:
/usr/bin/find: //home/virtfs/mohamy/proc/12873/task: No such file or directory
/usr/bin/find: //home/virtfs/mohamy/proc/16870/task: No such file or directory
/usr/bin/find: //proc/16873/task: No such file or directory
/usr/bin/find: //proc/16875/task: No such file or directory
I was wondering if any one may know the cause!
Box is cPanel-Centos
2 coe 3.6 & 2GB ram
View 3 Replies
View Related
Apr 9, 2008
We are taking out a quarter cabinet with 2.5amps from a colo company in the UK. I am just trying to figure out our expected usage figures for a few servers we are looking at putting in there. I'm not an electrician and i am struggling with all this amps, watts and volts stuff!
We are looking at running the following setup:
2 x PE2950 III with 1 Quad-Core Xeon E5410
8gb RAM
2 x146GB SAS (15.000 rpm) 3.5-inch Hard Drive 2 S 4 x 73GB SAS (15,000rpm) 3.5 inch Hard Drive 4 S in each server
2 x PE1950 III with 2 x Quad-Core Xeon CPUs X5450 3.0GHz/2x6MB 1333FSB 8GB 677MHz FBD (4x2GB dual rank DIMMs) 1 S 4 x 73GB SAS (10,000rpm) 2.5in Hard Drive in each server
if we will be able to run the above setup with 2.5amps?
View 1 Replies
View Related
Jan 3, 2008
I have DirectAdmin on my server but my customers have no need for it. My customers have no need to create databases, new email accounts, new users etc. etc. so I don't see the advantage of having this on my server.
Is not having Directadmin worth the extra performance and administrative chores?
Is there any way to measure and limit bandwidth on a shared hosting server without using a control panel?
How much resources does DirectAdmin use?
I heard it is not as much as CPanel but doesn't it slow down the server a little?
View 2 Replies
View Related
Jul 16, 2007
I have VPS account that is controlled my VM management, and VPS runs with WHM/cPanel.
When I login to VM control, it shows that I spent 9.5 Gb of traffic this month. When I check bandwidth in WHM it says 1.2 Gb!
Now, what do you think, which one is correct, and why there is so big difference?
View 1 Replies
View Related
Feb 25, 2015
I have centos -7 and apache 2.4.6. I have made one small php scripts and measuring the performance of server.
Average time is around 15 ms for per request. But when adding concurrent requests the average time increase too much high for the request see the below output
ab -n 10000 http://127.0.0.1/1.php
Connection Times (ms)
min mean[+/-sd] median max
Connect: 0 0 0.0 0 0
Processing: 14 17 2.6 15 35
Waiting: 0 1 0.2 1 10
Total: 14 17 2.6 15 35
With Concurrent connections
ab -n 1000 -c 100 http://127.0.0.1/1.php See the processing the mean request time its around 150 ms.
Connection Times (ms)
min mean[+/-sd] median max
Connect: 0 0 1.1 0 5
Processing: 25 150 24.7 153 213
Waiting: 2 134 25.2 138 194
Total: 29 150 24.1 153 216
ab -n 1000 -c 100 http://127.0.0.1/1.php See the processing the mean request time its around 150 ms when total request is 1000 only.
Connection Times (ms)
min mean[+/-sd] median max
Connect: 0 0 1.1 0 5
Processing: 25 150 24.7 153 213
Waiting: 2 134 25.2 138 194
Total: 29 150 24.1 153 216
How to configure the Apache so the request time decreas to low ms ???
In Centos -7 Default configuration of MPM Directory also not found ??? checked in httpd.conf and other file also.
View 1 Replies
View Related
May 3, 2009
What is the best way to handle prevent data loss in the event a hard drive goes bad in a server. We have never had one go yet but I can only imagine what a server load of domains suddenly losing their databases or sites. (giving that they didn't back their stuff up).
I know one was is a RAID setup. I just wanted to hear more.
What about if you need to move everyone from one server to another due to major upgrades? Like adding more hdd space.
View 6 Replies
View Related
Apr 26, 2008
i have two servers with whm/cpanel and centos,
i host my domain.com on server-A and create a account with subdomain sub.domain.com on server-A,
some days later,
i move the account website to server-B,
a> i change the domain of sub.domain.com to sub2.domain.com on server-A from whm,
b> and i edit the dns from whm and add a a address record to point to the server-B.
i think my setting is right and the link will run well,
but i am not sure why sometimes people can not link the sub.domain.com,
and they check do the check "ping sub.domain.com",
and they will get the ip of original server-A,
because it assail me for months and i'm not sure how to fix it completely.
View 5 Replies
View Related
May 8, 2009
I have been faced with a packet flooding issue.
Quick scenario, I run a few public game servers, and we have had a member go insane.
This member has been using a piece of software, to do a simple DDoS attack, and when they perform this attack, it laggs everybody out, and takes down the individual game server.
While this is occurring, I have been watching with a network analyzer program, and noticed the packets go sky high (from 4.4k to 150k+).
So, I am in need of a quick, piece of software that can block flood attacks, or whatever is going on.
View 5 Replies
View Related
Feb 22, 2008
my server sql keeps loss db connection during 'cpbackup' in progresss.
below are my.cnf settings. can someone suggest me how to tweak to optimize?
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
skip-locking
skip-innodb
query_cache_limit=1M
query_cache_size=128M
query_cache_type=1
max_user_connections=200
max_connections=500
interactive_timeout=10
wait_timeout=20
connect_timeout=20
thread_cache_size=128
key_buffer=512M
join_buffer=1M
max_allowed_packet=16M
table_cache=1024
record_buffer=1M
sort_buffer_size=4M
read_buffer_size=4M
max_connect_errors=10
thread_concurrency=8
myisam_sort_buffer_size=64M
server-id=1
View 6 Replies
View Related
Apr 24, 2007
We just had an issue with our colo provider. The thing is, from the day we ordered our colo with them we ordered, signed, and paid for a GigE (1000Mbps) port. We have been using and paying for a GigE pipe and 300Mbps worth of bandwidth for the past 11 months.
Just this month we find out that our colo provider actually only drop us a 100Mbit connection and not the GigE which we paid for and signed for on the contract.
I asked our sales rep there, he replied to us saying that we should have "asked" for a GigE drop, since many of their customers are buying GigE while their switches does not support GigE, so they said, they ussually drop 100Mbit anyway.
That does not seem right, right? Our switches from the first day has been GigE enabled even with 4 fiber optic port on each managed switch on every rack we have.
We have suffered loss and damages, as soon as they switched our port to GigE last week, our bandwidth usage immediately shows we are using 125Mbps with some spike of 800Mbps for a fracture of a moment.
All these times, we experience slowness, we always thought that it was our equipment or something, but it turns out that it's the pipe drop which is causing the problem.
Now, I have a dilema. If say we demand a compensation and become hostile asking for loss and damages compensation, which literally cost us hundreds of thousands of dollars of loss in these past 11 months, I am affraid that our colo provider will be giving us a hard time. We have hundreds of servers there. We don't plan to move, since it will be a lot of trouble.
The thing is they said that it was our fault, that we did not checked that the drop was not 1Gbps. We always have the impression that it was 1Gbps, but we did not checked it though. But still we bought 1Gbps and we paid for it and the contract also says so.
What do you think I should do? Should I "demand" the compensation? Or just leave it be, so we won't get a hard time for our growth in this provider. We will be moving to our own facility, but not anytime soon, probably in 2009, but again it depends on our cash flow, etc.
Anyway, who's fault is this? Is this our fault that we did not check what we bought? Or is it the provider fault, who dropped 100Mbit pipe while we buy and asked for GigE?
I would not want to come to a point wher there will be a legal complaint filed though. Would like to settle this for a good resolution. What steps would you suggest we take?
View 14 Replies
View Related
Jun 17, 2009
We have a license application client(IBM/LUM) that connects to a license server outside our network.
The clients works this way... it binds a random port and tries to connect to the remote IP with UDP port 1515.
Through wireshark I could see that it reaches the destionation, although the way back is unreachable.
If I add this random port to our router Port Forward rule, it works perfectly. Although this is not a solution cause the port is changing every time.
Isnt this strange? Other applications open random ports as well and comunication is two-way reachable.
If I connect directly to the internet, it works perfectly as well.
What can I try to do with our ZyWall USG300 Router to fix this situation?
View 3 Replies
View Related
Mar 2, 2008
I restored a database and got this error:
ERROR 1153 (08S01) at line 2663: Got a packet bigger than
'max_allowed_packet' bytes
why I got this error and how to fix this? vbulletin staff told me that I have to increase the 'max_allowed_packet' in my.cnf, then restart MySQL. Where can I find this file? I use Directadmin control panel for my dedicate server.
View 4 Replies
View Related
Apr 12, 2007
I having having issue with few of my servers sending Reset packet to a particular IP. I have disabled my firewall and noticed that few machines (Unix/Windows) is still sending Reset package to one IP only. Reset packet will be sent over on all ports except icmp ping.
Anybody know where to check? Or the server on the other IP is having problem which cause my servers to send the Reset packet
View 1 Replies
View Related
Apr 25, 2007
How to check in Unix machine? My server is sending a Reset packet to the specific IP.
View 6 Replies
View Related
Apr 26, 2009
I just had some thoughts cross my mind about oversold VPSes. If a hosting provider oversells their bandwidth and one or more of their clients demands more juice it just doesn't come; there is a lag and the system acts as if the internet itself is choked up. Everything waits for available bandwidth and adapts around it seamlessly.
Now supposing the same host oversells CPU power and has a ton of VPSes with tiny memory allotments. If one or more clients start pounding away then their load average, and to an extent the load of the physical server will go up and all tasks will slow down a bit, very similar to an isolated physical machine that was running some intense application that was slowing everything down. Well in this case too the system will adapt to it and just run things slower.
If a host oversells hard drive space nobody will know about it until space on the physical box runs out so until then it's totally transparent.
But what about RAM? If a host oversells RAM and the VPS thinks a certain block of memory is there but it's really not then what? Supposing 99% of the RAM in a physical box is currently in use and suddenly the demand rises to 110% of the available RAM. Seems to me like applications on the VPS will not slow down but rather crash and vanish into thin air. Or try to start and as they load more and more RAM up suddeny they will just go poof! Taking user data with them.
Am I wrong about this and has openvz impremented some failsafe mechanism to prevent this from happening? Because if not it means anyone who runs anything in an oversold(RAM) VPS is risking losing or at the very least corrupting their data.
View 14 Replies
View Related
May 30, 2007
I am moving a couple clients over to my server tonight, but I wanted to make sure I took steps that they don't miss any e-mail that might be sent. It is my understanding that say the switch happens tonight at midnight. Any e-mails they did not download from the old server will be stuck on there correct? Because they would come in the next morning and hit outlook and download just from the new server?
Is there a set protocol for doing this move with minimal client hic-ups?
View 3 Replies
View Related
Jan 11, 2008
How do packet losses affect running of a website, say i get packet loss for some site like around 30-40% but can still browse their websites, so how do packet losses affect working of a website ?
View 6 Replies
View Related
May 13, 2008
Our network have been ddosed very heavily for the last 15 days.
These attacks are relatively small 50 - 100 mbits at most but in very very high PPS rate.My firewall counts 10Billion packets in a single hour of an attack period.
We are dealing with these attacks with a combination of freebsd pf transparent bridge firewalls and mostly null routing.
I were able to capture some packets from different attacks from last week and today.
After deeply checking these attack capture files I can see that our attack comes from several thousands different spoofed Ip addresses but always the same mac address in their packet headers.So I thought if this attack is coming to us from a single machine rather than hundreds of different zombie servers.
I don't have a clue how to trace back this attack and find the real ip address behind. My upstream provider also don't have enough knowledge to help me.
So after todays attack I thought about sharing my capture files during attack and hope that someone here will help me. And show me a way to trace back these attacks.
View 13 Replies
View Related
