MRTG Cron Error
I've installed mrtg on my server and it's working fine, but I keep getting the following cronjob error every few minutes:
/usr/local/mrtg-2/bin/rateup: /usr/local/lib/libpng12.so.0: no version information available (required by /usr/lib64/libgd.so.2)
I've searched the net for a resolution and found others have had this issue, but no resolution has been offered.
Anyone else have this problem or know the solution?
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Mrtg Error
I've been having some trouble with mrtg and can't quite figure out what's going on: [root@spike ~]# service mrtg restart Shutting down MRTG: [FAILED] Starting MRTG: Daemonizing MRTG ... [root@spike ~]# WARNING: Problem with External get '/etc/mrtg/system network eth1': Expected a Number for 'in' but got '' WARNING: Problem with Externale get '/etc/mrtg/system network eth1': Expected a Number for 'out' but got '' Rateup WARNING: /usr/bin/rateup could not read the primary log file for index Rateup ERROR: /usr/bin/rateup found index's log file was corrupt or not in sorted order: time: 1143158400.Rateup WARNING: /usr/bin/rateup The backup log file for index was invalid as well ERROR: Skipping webupdates because rateup did not return anything sensible WARNING: rateup died from Signal 0 with Exit Value 1 when doing router 'index' Signal was 0, Returncode was 1 ERROR: Target[index1][_IN_] ' $target->[1]{$mode} ' did not eval into defined data ERROR: Target[index1][_OUT_] ' $target->[1]{$mode} ' did not eval into defined data Rateup WARNING: /usr/bin/rateup could not read the primary log file for tcp Rateup ERROR: /usr/bin/rateup found tcp's log file was corrupt or not in sorted order: time: 1183366800.Rateup WARNING: /usr/bin/rateup The backup log file for tcp was invalid as well ERROR: Skipping webupdates because rateup did not return anything sensible WARNING: rateup died from Signal 0 with Exit Value 1 when doing router 'tcp' Signal was 0, Returncode was 1 Rateup WARNING: /usr/bin/rateup could not read the primary log file for processes Rateup ERROR: /usr/bin/rateup found processes's log file was corrupt or not in sorted order: time: 1182693600.Rateup WARNING: /usr/bin/rateup The backup log file for processes was invalid as well ERROR: Skipping webupdates because rateup did not return anything sensible WARNING: rateup died from Signal 0 with Exit Value 1 when doing router 'processes' Signal was 0, Returncode was 1 Rateup WARNING: /usr/bin/rateup could not read the primary log file for mail-host-email-totals Rateup ERROR: /usr/bin/rateup found mail-host-email-totals's log file was corrupt or not in sorted order: time: 1115251200.Rateup WARNING: /usr/bin/rateup The backup log file for mail-host-email-totals was invalid as well ERROR: Skipping webupdates because rateup did not return anything sensible WARNING: rateup died from Signal 0 with Exit Value 1 when doing router 'mail-host-email-totals' Signal was 0, Returncode was 1 Rateup WARNING: /usr/bin/rateup could not read the primary log file for mail-host-email-queue Rateup ERROR: /usr/bin/rateup found mail-host-email-queue's log file was corrupt or not in sorted order: time: 1185176100.Rateup WARNING: /usr/bin/rateup The backup log file for mail-host-email-queue was invalid as well ERROR: Skipping webupdates because rateup did not return anything sensible WARNING: rateup died from Signal 0 with Exit Value 1 when doing router 'mail-host-email-queue' Signal was 0, Returncode was 1 Rateup WARNING: /usr/bin/rateup could not read the primary log file for mail-host-email-count Rateup ERROR: /usr/bin/rateup found mail-host-email-count's log file was corrupt or not in sorted order: time: 1158796800.Rateup WARNING: /usr/bin/rateup The backup log file for mail-host-email-count was invalid as well ERROR: Skipping webupdates because rateup did not return anything sensible WARNING: rateup died from Signal 0 with Exit Value 1 when doing router 'mail-host-email-count' Signal was 0, Returncode was 1 /etc/mrtg/system network eth0 /etc/mrtg/system network eth1
View Replies!
View Related
Mrtg-2 Rateup ERROR
Log files is full ? Quote: 2007-06-12 12:25:02, Rateup ERROR: /usr/local/mrtg-2/bin/rateup found that index's log file time of 1181714411 was greater than now (1181643902) ERROR: Let's not do the time warp, again. Logfile unchanged. 2007-06-12 12:25:02, Rateup ERROR: /usr/local/mrtg-2/bin/rateup found that tcp's log file time of 1181714412 was greater than now (1181643902) ERROR: Let's not do the time warp, again. Logfile unchanged. 2007-06-12 12:25:02, Rateup ERROR: /usr/local/mrtg-2/bin/rateup found that load's log file time of 1181714412 was greater than now (1181643902) ERROR: Let's not do the time warp, again. Logfile unchanged. 2007-06-12 12:25:02, Rateup ERROR: /usr/local/mrtg-2/bin/rateup found that swap's log file time of 1181714412 was greater than now (1181643902) ERROR: Let's not do the time warp, again. Logfile unchanged. 2007-06-12 12:25:02, Rateup ERROR: /usr/local/mrtg-2/bin/rateup found that processes's log file time of 1181714412 was greater than now (1181643902) ERROR: Let's not do the time warp, again. Logfile unchanged. 2007-06-12 12:25:02, Rateup ERROR: /usr/local/mrtg-2/bin/rateup found that uptime's log file time of 1181714412 was greater than now (1181643902) ERROR: Let's not do the time warp, again. Logfile unchanged. 2007-06-12 12:25:02, Rateup ERROR: /usr/local/mrtg-2/bin/rateup found that cpu's log file time of 1181714413 was greater than now (1181643902) ERROR: Let's not do the time warp, again. Logfile unchanged. 2007-06-12 12:25:02, Rateup ERROR: /usr/local/mrtg-2/bin/rateup found that memory's log file time of 1181714413 was greater than now (1181643902) ERROR: Let's not do the time warp, again. Logfile unchanged Where are these logs?
View Replies!
View Related
Error In Cron
Got this from the daily.cron email: /etc/cron.daily/chkrootkit.sh: /proc/18927/fd: No such file or directory really weird, when I run that command manually, it doesn't show that error.
View Replies!
View Related
Cron Demon Error
I have got this email after a bit of tweaking of my server with this message for the last 6 hours at 2 hour intervals. /etc/cron.hourly/modsecparse.pl: install_driver(mysql) failed: Can't load '/usr/lib/perl5/site_perl/5.8.8/i686-linux/auto/DBD/mysql/mysql.so' for module DBD::mysql: libmysqlclient.so.14: cannot open shared object file: No such file or directory at /usr/lib/perl5/5.8.8/i686-linux/XSLoader.pm line 70. at /usr/lib/perl5/site_perl/5.8.8/i686-linux/DBD/mysql.pm line 14 Compilation failed in require at (eval 4) line 3. Perhaps a required shared library or dll isn't installed where expected at /etc/cron.hourly/modsecparse.pl line 19
View Replies!
View Related
Mrtg
I have problems with in mrtg. I am getting to every 5 minutes an email from my server as below: ===================== ----- Original Message ----- From: "Cron Daemon" <root@lmp.ssss.com> To: <root@lmp.ssss.com> Sent: Tuesday, November 21, 2007 15:00 PM Subject: Cron <root@lmp> /usr/bin/mrtg /etc/mrtg/mrtg.cfg --lock-file /var/lock/mrtg/mrtg_l --confcache-file /var/lib/mrtg/mrtg.ok ERROR: I Quit! Another copy of mrtg seems to be running. Check /etc/mrtg/mrtg.pid Daemonizing MRTG ... =====================
View Replies!
View Related
MRTG On Plesk
In the past i've sucessfully installed MRTG on cpanel and plain redhat boxes, but now i have a new plesk server and I don't know how to proceed to install MRTG so it can be available at [url]
View Replies!
View Related
Prtg Is Same Mrtg
Prtg is same Mrtg? Or prtg is only a software? What's you use for monitoring bandwith? What's think about [url] Best way for monitoring bandwith is to make this over router snmp, right?
View Replies!
View Related
Configuriring MRTG
Configuriring MRTG I installed mrtg,then i installed module on webmin for it,but still there is some error and nothing show on index.html of mtrg directory.Cron is installed over webmin module,but nothing show yet.I see on default is locahost and public on webmin module listed,but when i clicked add i got error: Use of uninitialized value in hash element at /usr/local/mrtg-2/bin/indexmaker line 353. What i need to properly monitor network interface? Here is presently conf file: WorkDir:/home/bla/public_html/mrtg/ # Created by # /usr/local/mrtg-2/bin/cfgmaker public@69.45.45.78 ### Global Config Options # for UNIX # WorkDir: /home/http/mrtg # or for NT # WorkDir: c:mrtgdata ### Global Defaults # to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits EnableIPv6: no ###################################################################### # System: available9.bla.com # Description: Linux available9.bla.com 2.6.18-92.el5 #1 SMP Tue Jun 10 18:51:06 EDT 2008 x86_64 # Contact: Root <root@localhost> (configure /etc/snmp/snmp.local.conf) # Location: Unknown (edit /etc/snmp/snmpd.conf) ####################################################################
View Replies!
View Related
MRTG Config
I've installed MRTG, but am having problems making the config file, all I want to do is monitor the in/out bandwidth (2 graphs) on my own server, has anyone got an example file they could paste here?
View Replies!
View Related
MRTG With Plesk
I have a box with centos and plesk from dedicatedplace and they have problem to unstall MRTG on it, [root@local]# indexmaker --output=/var/www/mrtg/index.html /etc/mrtg/mrtg.cfg Use of uninitialized value in hash element at /usr/bin/indexmaker line 340.
View Replies!
View Related
MRTG And 3550
I have mrtg working fine on about 10 2650's, however now that I am trying to add 2950 and 3550's I cant seem to get MRTG to connect to get data. I added the community the same as our other communities. snmp-server community blah-r34d RO 30 snmp-server host 10.10.0.134 blah-r34d snmp the 10.10.48.3 is the IP to vlan1 for the switch. SNMP Error: no response received SNMPv1_Session (remote host: "10.10.48.3" [10.10.48.3].161) community: "blah-r34d" request ID: 554709748 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 627 SNMPWALK Problem for 1.3.6.1.2.1.1 on blah-r34d@10.10.48.3::::::v4only at ./cfgmaker line 940 WARNING: Skipping blah-r34d@10.10.48.3: as no info could be retrieved
View Replies!
View Related
Mrtg / Rtg
I'm going to be colocating a server and I'm wondering what you guys would recommend for a MRTG / RTG that gives you estimated transfer for the month. I know you can use MRTG and multiply and divide and all that but I'm looking for something that will also include estimated monthly transfer in both mb/s and gigabits per month.
View Replies!
View Related
Mrtg Installation
I tried to install mrtg using this Quote: wget [url]chmod +x install.mrtg.sh ./install.mrtg.sh Everything looks to be installed correctly but when i try to access [url]it show 404 Not found error.
View Replies!
View Related
MRTG With 95% And Usage Info
how to configure MRTG so that it displays the 95% usage as well as total amounts of traffic used? This is what I need - first image on left. And this is what I have so far after the install: 2nd image on the right. Also, how do I set the maximum of allowed traffic (to be taken as "maximum" for the percentage calculation)?
View Replies!
View Related
MRTG Usage Explanations
My ISP is using MRTG (95th percentile) for my monthly billing. However the numbers showing on my "usage" page aren't adding up. Well, to clarify, the number by which they bill me at is the "Last 30 days usage (Metered 95%): xxxx mb/s". But this number isn't reflecting what I am seeing in the individual Daily/Weekly/Monthly stats and graphs. Daily: Max in: 38.0 kb/s Max out 320.9 kb/s Avg In: 4216.0 b/s Avg out 24.1 kb/s Weekly: Max In: 1692.4 kb/s Max Out 5675.1 kb/s Avg In: 26.9 kb/s Avg Out 86.8 kb/s Monthly: Max In: 3541.9 kb/s Max Out 5635.4 kb/s Avg In: 298.4 kb/s Avg Out 410.4 kb/s Last 30 Days uaage (Metered 95%): 4518.43 kb/s Now for two weeks my server was pushing nearly 10 mb/s (95th percentile only use the HIGHER of the In OR Out as its measurement)- and then for the next 10 days my server has barely pushed 100 kb/s. 10 days ago the "Last 30 days usage" number was 4480.1 mb/s, but today, 10 days later, the "LAst 30 days usage" is 4518.4 kb/s. My ISP tells me that "last 30 days uage" is calculated every 5 minutes. But if my usage 10 days ago was 4480kb/s and my server has barely pushed ANY bandwidth since, shouldn't the laws of averages see that number steadily declining? As an example: If I pushed exactly 10mb/s for exactly two weeks, then pushed 0mb/s for the next two weeks....then the average mb/s for a 30 day period (not calculating 95th %) would be 5mb/s. And as the 3rd week started, I would steadily see the 30 day usage start to decline and eventually reach 5mb/s on the last day of the 30 period. This is a logical, and my approach, to understanding this - yet the numbers aren't indicating this.
View Replies!
View Related
MRTG Taking Up Resources
I have a VPS where i have cpanel installed. I have noticed quite a number of times through my WHM Cpu/Memory usage that there are 3 instances of MRTG and they seem to be taking up a lot of resources. I did not install mrtg and i don't even know how do i go ahead and view them Can someone tell me how do i remove them and is it just me or are there actually 3 instances of MRTG running for everyone? Here's a screenshot of the same: [url]
View Replies!
View Related
MRTG Stats Updating
I have the following setup in cron for my MRTG stats: 0,10,20,30,40,50 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/bandwidth.cfg 0,11,21,31,41,51 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/cpu.cfg 0,12,22,32,42,52 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/cpu-temp.cfg 0,13,23,33,43,53 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/ping.cfg 0,15,25,35,45,55 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/memory.cfg 0,16,26,36,46,56 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/newconns.cfg 0,17,27,37,47,57 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/estabcons.cfg 0,18,28,38,48,58 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/ping2.cfg But I'm not sure how much power it actually takes to generate theses MRTG stats... The server is a Celeron D 2.8Ghz, 512Mb ATA soft raid system. Do you think that I should update the stats less frequently to decrease the server usage?
View Replies!
View Related
MRTG Stats Updating
I have the following setup in cron for my MRTG stats: 0,10,20,30,40,50 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/bandwidth.cfg 0,11,21,31,41,51 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/cpu.cfg 0,12,22,32,42,52 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/cpu-temp.cfg 0,13,23,33,43,53 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/ping.cfg 0,15,25,35,45,55 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/memory.cfg 0,16,26,36,46,56 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/newconns.cfg 0,17,27,37,47,57 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/estabcons.cfg 0,18,28,38,48,58 * * * * env LANG=C ../../mrtg-2/bin/mrtg ../...stats/ping2.cfg But I'm not sure how much power it actually takes to generate theses MRTG stats... The server is a Celeron D 2.8Ghz, 512Mb ATA soft raid system. Do you think that I should update the stats less frequently to decrease the server usage?
View Replies!
View Related
Installing MRTG In My Linux Server
I tried installing MRTG in my Linux Server by using help from - [url] What i have done till now is - cd /usr/local/src gunzip -c mrtg-2.16.2.tar.gz | tar xvf - cd mrtg-2.16.2 ./configure --prefix=/usr/local/mrtg-2 make make install After this i am unable to understand what to do, and how to start MRTG graphs. * the next last step says, CONFIGURATION The next step is to configure mrtg for monitoring a network device. This is done by creating an mrtg.cfg file which defines what you want to monitor. Luckily, you don't have to dive straight in and start writing your own configuration file all by yourself. Together with mrtg you also got a copy of cfgmaker. This is a script you can point at a router of your choice; it will create a mrtg configuration file for you. You can find the script in the bin subdirectory. cfgmaker --global 'WorkDir: /home/httpd/mrtg' --global 'Options[_]: bits,growright' --output /home/mrtg/cfg/mrtg.cfg community@router.abc.xyz This example above will create an mrtg config file in /home/mrtg/cfg assuming this is a directory visible on your webserver. You can read all about cfgmaker in cfgmaker. One area you might want to look at is the possibility of using --ifref=ip to prevent interface renumbering troubles from catching you. ^^ this is what i am not able to understand. When i ran the script, (below mention) it gave many errors, how to resolve them ? [root@c bin]# ./cfgmaker --global 'WorkDir: /home/httpd/mrtg' --global 'Options[_]: bits,growright' output /home/mrtg/cfg/mrtg.cfg eth0 Error: can't resolve "output" to IP address at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 428 SNMPWALK Problem for public@output::::::v4only at ./cfgmaker line 950 WARNING: Skipping public@output: as no info could be retrieved Error: can't resolve "/home/mrtg/cfg/mrtg.cfg" to IP address at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 428 SNMPWALK Problem for public@/home/mrtg/cfg/mrtg.cfg::::::v4only at ./cfgmaker line 950 WARNING: Skipping public@/home/mrtg/cfg/mrtg.cfg: as no info could be retrieved Error: can't resolve "eth0" to IP address at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 428 SNMPWALK Problem for public@eth0::::::v4only at ./cfgmaker line 950 WARNING: Skipping public@eth0: as no info could be retrieved # Created by # ./cfgmaker --global "WorkDir: /home/httpd/mrtg" --global "Options[_]: bits,growright" output /home/mrtg/cfg/mrtg.cfg eth0 ### Global Config Options # for UNIX # WorkDir: /home/http/mrtg # or for NT # WorkDir: c:mrtgdata ### Global Defaults # to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits EnableIPv6: no WorkDir: /home/httpd/mrtg Options[_]: bits,growright
View Replies!
View Related
Irregular Bandwidth Usage In MRTG
I run a server with lighttpd web server. The server is for file hosting, see the mrtg [url] The server is on 1 Gbit shared connection. The bandwidth seems increase/decrease quickly. Can this happen? I have another file hosting server, on that bandwidth usage is almost sine wave. Lighttpd web server is running properly and never crashed.
View Replies!
View Related
Error APF :: Error Fetching Interface Information: Device Not Found
im still getting the following error Code: root@main [/tmp/apf-9.7-1]# ./install.sh Installing APF 9.7-1: eth0: error fetching interface information: Device not found Completed. Installation Details: Install path: /etc/apf/ Config path: /etc/apf/conf.apf Executable path: /usr/local/sbin/apf Other Details: eth0: error fetching interface information: Device not found cp: cannot stat `/etc/apf.bk.last/vnet/*.rules': No such file or directory Imported options from 9.7-1 to 9.7-1. Note: Please review /etc/apf/conf.apf for consistency, install default backed up to /etc/apf/conf.apf.orig my host has said Code: edit the apf.conf file to venet0:0 instead of eth0 which ive done and im still getting the error, Ive pasted my current conf.apf config below Code: #!/bin/sh # # APF 9.7 [apf@r-fx.org] # Copyright (C) 1999-2007, R-fx Networks <proj@r-fx.org> # Copyright (C) 2007, Ryan MacDonald <ryan@r-fx.org> # This program may be freely redistributed under the terms of the GNU GPL # # NOTE: This file should be edited with word/line wrapping off, # if your using pico/nano please start it with the -w switch # (e.g: pico -w filename) # NOTE: All options in this file are integer values unless otherwise # indicated. This means value of 0 = disabled and 1 = enabled. ## # [Main] ## # !!! Do not leave set to (1) !!! # When set to enabled; 5 minute cronjob is set to stop the firewall. Set # this off (0) when firewall is determined to be operating as desired. DEVEL_MODE="1" # The installation path of APF; this can be changed but it is not recommended. INSTALL_PATH="/etc/apf" # Untrusted Network interface(s); all traffic on defined interface will be # subject to all firewall rules. This should be your internet exposed # interfaces. Only one interface is accepted for each value. IFACE_IN="venet0" IFACE_OUT="venet0" # Trusted Network interface(s); all traffic on defined interface(s) will by-pass # ALL firewall rules, format is white space or comma separated list. IFACE_TRUSTED="" # This option will allow for all status events to be displayed in real time on # the console as you use the firewall. Typically, APF used to operate silent # with all logging piped to $LOG_APF. The use of this option will not disable # the standard log file displayed by apf --status but rather compliment it. SET_VERBOSE="1" # The fast load feature makes use of the iptables-save/restore facilities to do # a snapshot save of the current firewall rules on an APF stop then when APF is # instructed to start again it will restore the snapshot. This feature allows # APF to load hundreds of rules back into the firewall without the need to # regenerate every firewall entry. # Note: a) if system uptime is below 5 minutes, the snapshot is expired # b) if snapshot age exceeds 12 hours, the snapshot is expired # c) if conf or a .rule has changed since last load, snapshot is expired # d) if it is your first run of APF since install, snapshot is generated # - an expired snapshot means APF will do a full start rule-by-rule SET_FASTLOAD="0"
View Replies!
View Related
How To Generate PHP Error.log Files In The Directory Of Error
unable to get any php5 error logs Here are my settings in the /etc/php5/apache2/php.ini file: display_errors = On display_startup_errors = Off log_errors = On log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On error_log = /var/log/php5/error.log However unfortunately I never see any error log being generated in the /var/log/php5/error.log file? Also with my shared hosting site one thing which I noticed was, due to some configurations set by them, the error.log used to generate in the folder where the error occured. This is a cool thing which they used to do, but I just dont understand how did they do that.
View Replies!
View Related
Fatal Error: Internal Optimizer Error: Can't Translate Opcode
I upgraded my PHP to 5.2.4 ang changed server API from Apache to CGI, and now a site doesnt load anymore... It gives this error message: Fatal error: Internal Optimizer error: can't translate opcode 60 (JMP_NO_CTOR), please contact Zend support in /home/vrock/public_html/rwf/rwengine.lib on line 0 PHP Version 5.2.4 Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies with Zend Extension Manager v1.2.0, Copyright (c) 2003-2007, by Zend Technologies with Zend Optimizer v3.3.0, Copyright (c) 1998-2007, by Zend Technologies
View Replies!
View Related
Error On Yum Update :: Error: Missing Dependency: Perl(Crypt:asswdMD5) Is Needed By Package Syslinux
--> Populating transaction set with selected packages. Please wait. ---> Package cadaver.i386 0:0.22.5-1.el5.rf set to be updated ---> Package mtr.i386 2:0.72-1.el5.rf set to be updated ---> Package rsync.i386 0:3.0.2-1.el5.rf set to be updated ---> Package nmap.i386 2:4.20-1.el5.rf set to be updated ---> Package lftp.i386 0:3.7.1-1.el5.rf set to be updated ---> Package syslinux.i386 0:3.63-1.el5.rf set to be updated ---> Package dkms.noarch 0:2.0.19-2.el5.rf set to be updated ---> Package subversion.i386 0:1.4.6-0.1.el5.rf set to be updated --> Running transaction check --> Processing Dependency: perl(Crypt:asswdMD5) for package: syslinux --> Finished Dependency Resolution Error: Missing Dependency: perl(Crypt:asswdMD5) is needed by package syslinux when I run yum update
View Replies!
View Related
"Another Copy Of Mrtg Seems To Be Running."
Keep getting emails like the following, (about 200 so far!):- Quote: ERROR: I Quit! Another copy of mrtg seems to be running. Check /etc/mrtg/mrtg.pid Daemonizing MRTG ... /etc/mrtg/mrtg.pid just contains a 4-digit number. WHM 11.11.0 cPanel 11.16.0-S18450 CENTOS Enterprise 4.6 i686
View Replies!
View Related
Cron
I have root access to a server. Is it possible to create a cron that would restart my ftp and http server every so often. Like once a week or somthing. If so how would i do it?
View Replies!
View Related
SSL Library Error: 218734605 Error
I could not get Apache to restart. It kept failing. Narrowed it down to this error: [Tue Jan 22 16:09:03 2008] [error] SSL Library Error: 218734605 error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib Removed the SSL portion out of my virtual host file and Apache restarted. But if I put the SSL portion back in, Apache fails. All paths in http.conf and ssl.conf files are correct. And the SSL Cert is valid. This is Centos box with Apache2 with OpenSSL 0.9.7. Any suggestions on why this happened out of the blue and how to fix it?
View Replies!
View Related
Per Second Cron Jobs?
Hey everyone, my friend's dad is looking for a web host that will allow his cron jobs to run every second. Most hosts apparently dont allow cron jobs faster than 5 seconds apart. How often a host can run cron jobs isn't really advertised on their sites so I'm having a bit of trouble finding a host. I've resorted to just sending emails to sales addresses asking about it. Does anyone know how I can find a host like this?
View Replies!
View Related
Does Cron Timeout?
Simply wondering, does cron timeout? I have heard mixed reports and can't find any good info. Personally i've run a cronjob for up to 6 minutes, but as my best method was sending myself emails through php, its not exactly a highly accurate testing method. On the same note, what would happen if one cronjob is running a php script for over 10 minutes, then another cron job starts on the same script, before the first one has finished?
View Replies!
View Related
Rsync And Cron
I have a bit of a strange problem, I have an rsync command setup in the servers crontab and from the cron log it show it ran the command but the files don't copy to the backup server. If I take the rsync syntax and run it manually all the files copy across with no errors, but I can't figure out why the cronjob doesn't work properly.
View Replies!
View Related
Remote Cron
I've just noticed that many people may have a free remote cron facility without realising it. If you have any domains registered with Godaddy, you get free web space that includes a cron facility. It only runs every half hour, but you could set six jobs at 5 min intervals to get an effective 5-minute poll, which is good enough for many purposes. You could use it to check uptime on another site, for example. Has anyone tried this?
View Replies!
View Related
Cron Commands
I've been reading through tutorials for setting up cron commands via cPanel, but everything I have tried does not work. What I need to do is simple - I just want to run a php file on my server once every 15 minutes.
View Replies!
View Related
Cron Daemon
Im getting daily 100 of emails from Cron Daemon Cron which having following information any body let me know what is cron daemon and how can i disable these email Code: /bin/sh: /usr/local/etc/logcheck.sh: No such file or directory
View Replies!
View Related
|
TRACKER
