I have a VPS with 256m guaranteed RAM .. and I have CPanel. A couple of days ago I got to fiddling with a database issue and had phpMyAdmin open for the better part of an hour. So I got to wondering what something like that does to my VPS?
A secondary question .. same thing but on a dedicated server with 1g RAM?
I have a VPS with 768Mb of RAM which was always suitable for the websites I'm hosting
as most of them are not popular and none of them got high traffic recently at all
But for over 2 days the vps is eating the ram and killing all the services (cpanel/httpd/ftp/MySQL..)
I want to know what is causing this and stop it by any way
I contacted my vps support and they told me to write "top" in the SSH but I didn't understand any thing from what I see and I didn't know what to do after writing that command .
I remember long time ago when I used to host on Layered Tech fast network good stuff, affordable price my first server costed me 90 dollars on Layered Tech with about 20 dollar setup one time fee.
I visited today after about 2 years and I'm pretty much surprised to see their prices they are by no means affordable as they were previously and the setup fee is now 50 dollars on every server.
With such large number of servers in their data centers shouldn't they be able to make them affordable? yet I have seen same server on WHT ads section for fraction of the price LT expects and not to mention the excessive setup fee.
I'm not complaining, its their business, but is it really helping them? I cant be the only person feeling this anti-love for Layered Tech being a former LT customer, I had no problems with them or their services I just left after I sold my site and moved into VPS. But seeing the new prices its a bit shocking.
the server load averges on my VPS have been very high - escalating to 6.5 in cases.
The process causing this is:
PidOwnerPriorityCpu %Mem %Command 7370 mysql -10
76.7
3.0 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --pid-file=/var/lib/mysql/opal.ngwebservers.net.pid --skip-external-locking
My VPS is hosted by Virpus Networks, and has spec:
512RAM (1024 burstable), 10GB hard drive space.
8 of these processors on node:
Processor #1 Vendor: GenuineIntel
Processor #1 Name: Intel(R) Xeon(TM) CPU 2.80GHz
Processor #1 speed: 174.594 MHz
Processor #1 cache size: 2048 KB
No hardware or software changes were implemented on the VPS as far as I am aware.
The MySQL process causing this is:
28993movies_mybblocalhostmovies_mybbQuery36Copying to tmp tableSELECT t.tid, t.dateline, p.edittime, t.subject, f.allowhtml, f.allowmycode, f.allowsmilies, f.allow
This has been going on since I first saw the loads go high...
I have many servers on vrtservers.net and is happy of they support. And I planing be a reseller of them.
But the nightmare come from last day..
My main server have got some SPAM report from spamcap.net
[url]
the spamcap.net report my server runing a open proxy.and somebody using it as SPAM.
before the SPAM report..
I know this ISSUE and have fix it..
so the proxy just run many hours.[ check the mrtg graph.[url]
sinse the SPAM report.
vrtserver.net put this server offline..
I can Understand it.
And I have contact the support@vrtservers.net Instantly.
And I proceed the case of spamcap.net too.
But the nightmare is ....
When I ask "how to reconnect my servers/What time will the case close?" to VRTSERVERs.NET.
the vrtservers.net reply to me said the server has been terminated and there is no way to get my data back.
My god ..
all of my server's data has been lost!
vrtservers.net is killing me now!
I have a VPS with 320MB of RAM. The problem is that spammassassin is killing my VPS.
Spamd service was using 50% of memory (+- 150MB of RAM).
Do you think that this is normal RAM for Spamd?
trying to get mod_security installed on my HSphere server, the install goes ok until i try and load rules?
If i just load the exclude.conf rule then php sites work, if i also load rules.conf or any other rules then my php sites get 'connection refused error' ?
I cannot find any thing in logs and there is no log written for mod_security?
here is my modsecurity.conf
Quote:
#If you want to scan the output, uncomment these
#SecFilterScanOutput On
#SecFilterOutputMimeTypes "(null) text/html text/plain"
# Accept almost all byte values
SecFilterForceByteRange 1 255
# Server masking is optional
#fake server banner - NOYB used - no one needs to know what we are using
SecServerSignature "NOYB"
#SecUploadDir /tmp
#SecUploadKeepFiles Off
# Only record the interesting stuff
SecAuditEngine RelevantOnly
SecAuditLog /var/log/audit_log
# You normally won't need debug logging
SecFilterDebugLevel 0
SecFilterDebugLog logs/modsec_debug_log
#And now, the rules
#Remove any of these Include lines you do not use or have rules for.
#First, add in your exclusion rules:
#These MUST come first!
Include /etc/modsecurity/exclude.conf
#Application protection rules
#Include /etc/modsecurity/rules.conf
bash-2.05b# cat /etc/modsecurity.conf
<IfModule mod_security.c>
# Only inspect dynamic requests
# (YOU MUST TEST TO MAKE SURE IT WORKS AS EXPECTED)
#SecFilterEngine DynamicOnly
SecFilterEngine On
# Reject requests with status 500
SecFilterDefaultAction "deny,log,status:500"
# Some sane defaults
SecFilterScanPOST On
SecFilterCheckURLEncoding On
SecFilterCheckCookieFormat On
SecFilterCheckUnicodeEncoding Off
SecFilterNormalizeCookies On
# enable version 1 (RFC 2965) cookies
SecFilterCookieFormat 1
SecServerResponseToken Off
#If you want to scan the output, uncomment these
#SecFilterScanOutput On
#SecFilterOutputMimeTypes "(null) text/html text/plain"
# Accept almost all byte values
SecFilterForceByteRange 1 255
# Server masking is optional
#fake server banner - NOYB used - no one needs to know what we are using
SecServerSignature "NOYB"
#SecUploadDir /tmp
#SecUploadKeepFiles Off
# Only record the interesting stuff
SecAuditEngine RelevantOnly
SecAuditLog /var/log/audit_log
# You normally won't need debug logging
SecFilterDebugLevel 0
SecFilterDebugLog logs/modsec_debug_log
#And now, the rules
#Remove any of these Include lines you do not use or have rules for.
#First, add in your exclusion rules:
#These MUST come first!
Include /etc/modsecurity/exclude.conf
#Application protection rules
#Include /etc/modsecurity/rules.conf
#Comment spam rules
#Include /etc/modsecurity/blacklist.conf
#Bad hosts, bad proxies and other bad players
##Include /etc/modsecurity/blacklist2.conf
#Bad clients, known bogus useragents and other signs of malware
##Include /etc/modsecurity/useragents.conf
#Known bad software, rootkits and other malware
##Include /etc/modsecurity/rootkits.conf
#Signatures to prevent proxying through your server
#only rule these rules if your server is NOT a proxy
##Include /etc/modsecurity/proxy.conf
#Just in Time Patching for Vulnerable Applications
##Include /etc/modsecurity/jitp.conf
#Google Hacks signatures
##Include /etc/modsecurity/recons.conf
#Include /etc/modsecurity/
</IfModule>
guys im tired off fighting those hackers everyday! i have about 20 websites,and everyday i have one of them hacked! i restore a backup then another one hacked!
thats unbelivable!!!
those bastards upload there shell scripts to websites via bugs or whatever from php files!!
is there anyway to stop these commands?
can .htaccess helps? how?
i talked to my webhosting companies for my websites! ....
Virtuozzo 3.0 is killing VPS's /usr/bin/mysqld_safe process but leaving /usr/sbin/mysqld UP which is causing cPanel to be unable to automatically restart MySQL after that.
View 14 Replies View Relatedfrom top:
12478 root 35 19 2004 680 308 R 39 0.0 8:54.95 gzip
using anywhere from 30-50% of my cpu for nearly 10 min now. but, no memory usage.
any ideas? should i kill the pid?
site is running pretty slow as a result of this.
24 hours ago something wired happend..
For some reason httpd is causing high serverload.
ATM : 22:44:17 up 22:17, 2 users, load average: 6.23, 6.12, 8.88
U
Will keep gooing up and httpd need to be restartet when serverload comes up to 30.
The traffic on the server is normal, no changes is made on the server.
Opt 248
3gb ram
250gb sata II
I have a fairly unique problem. My server runs great 95% of the time. Loads average under 1. However backups have become a server killer. I use cpanel scheduled backup at early morning hours. The reason backups kill my server is that I have 300,000+ (and counting) images in a directory. They are all small pngs generated by LaTeX. It takes my server several hours to backup the images. I usually even have to stop apache to free up some power. This problem is only going to get worse as I get more images. Maybe I could upgrade proc or upgrade to faster HD? That would be costly, hopefully not.
Should I hire a professional backup service? Costly, and would that help? Or is there a way of storing the images or doing the cpbackup I am doing wrong?
if it was possible to kill a server running WHMCS by executing the cron.php via cronjob on a remote server once every minute.
I just wanted to see if this was potentially harmful, so I can submit it to Matt without sounding like an idiot...
One of these rules is causing name server lookups to fail, but I can't seem to figure out which one, can anyone spot the problem?
Code:
[root@example ~]# iptables -L -n
Chain INPUT (policy DROP)
target prot opt source destination
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
INVDROP all -- 0.0.0.0/0 0.0.0.0/0 state INVALID
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x3F/0x00
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x3F/0x3F
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x03/0x03
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x06
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x05/0x05
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x11/0x01
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x18/0x08
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x30/0x20
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:20
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:21
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:53
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:110
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:143
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:465
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:953
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:993
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:995
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:10023
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:20
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:21
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:53
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:953
ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 state NEW icmp type 8
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:53 dpt:53
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:53 dpt:53
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:53 dpts:1024:65535
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:53 dpts:1024:65535
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spts:1024:65535 dpt:53
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spts:1024:65535 dpt:53
LOGDROPIN all -- 0.0.0.0/0 0.0.0.0/0
Chain FORWARD (policy DROP)
target prot opt source destination
Chain OUTPUT (policy DROP)
target prot opt source destination
INVDROP all -- 0.0.0.0/0 0.0.0.0/0 state INVALID
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x3F/0x00
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x3F/0x3F
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x03/0x03
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x06
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x05/0x05
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x11/0x01
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x18/0x08
INVDROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x30/0x20
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:20
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:21
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:53
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:110
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:113
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:953
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:10023
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:9999
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:20
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:21
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:53
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:113
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:123
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:953
ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 state NEW icmp type 8
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:53 dpt:53
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:53 dpt:53
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spts:1024:65535 dpt:53
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spts:1024:65535 dpt:53
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp spt:53 dpts:1024:65535
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:53 dpts:1024:65535
LOGDROPOUT all -- 0.0.0.0/0 0.0.0.0/0
Chain INVDROP (18 references)
target prot opt source destination
DROP all -- 0.0.0.0/0 0.0.0.0/0
Chain LOGDROPIN (1 references)
target prot opt source destination
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:67
DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:68
DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:111
DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:111
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:113
DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:113
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpts:135:139
DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpts:135:139
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445
DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:445
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:513
DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:513
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:520
DROP udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:520
LOG tcp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *TCP_IN Blocked* '
LOG udp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *UDP_IN Blocked* '
LOG icmp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *ICMP_IN Blocked* '
DROP all -- 0.0.0.0/0 0.0.0.0/0
Chain LOGDROPOUT (1 references)
target prot opt source destination
LOG tcp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *TCP_OUT Blocked* '
LOG udp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *UDP_OUT Blocked* '
LOG icmp -- 0.0.0.0/0 0.0.0.0/0 limit: avg 30/min burst 5 LOG flags 0 level 4 prefix `Firewall: *ICMP_OUT Blocked* '
DROP all -- 0.0.0.0/0 0.0.0.0/0
My nobody_check is killing a process that seems to be o.k. but I'm not sure. The process is running /usr/bin/perl-bin which I never heard of. I thought it was /usr/bin/perl
Should I be concerned? Again, I don't know what /perl-bin is.
Process ID: 28457 has been killed
Restuls for PID: 28457
total 0
dr-xr-xr-x 3 nobody nobody 0 Jul 23 17:00 .
dr-xr-xr-x 201 root root 0 Jun 29 11:59 ..
dr-xr-xr-x 2 root root 0 Jul 23 17:00 attr
-r-------- 1 root root 0 Jul 23 17:00 auxv
-r--r--r-- 1 root root 0 Jul 23 17:00 cmdline
lrwxrwxrwx 1 root root 0 Jul 23 17:00 cwd -> /
-r-------- 1 root root 0 Jul 23 17:00 environ
lrwxrwxrwx 1 root root 0 Jul 23 17:00 exe -> /usr/bin/perl-bin
dr-x------ 2 root root 0 Jul 23 17:00 fd
-rw-r--r-- 1 root root 0 Jul 23 17:00 loginuid
-r-------- 1 root root 0 Jul 23 17:00 maps
-rw------- 1 root root 0 Jul 23 17:00 mem
-r--r--r-- 1 root root 0 Jul 23 17:00 mounts
lrwxrwxrwx 1 root root 0 Jul 23 17:00 root -> /
-r--r--r-- 1 root root 0 Jul 23 17:00 stat
-r--r--r-- 1 root root 0 Jul 23 17:00 statm
-r--r--r-- 1 root root 0 Jul 23 17:00 status
dr-xr-xr-x 3 root root 0 Jul 23 17:00 task
-r--r--r-- 1 root root 0 Jul 23 17:00 wchan
Netstat:
tcp 0 0 127.0.0.1:783 127.0.0.1:40957
CLOSE_WAIT 28457/spamd child
udp 0 0 xx.xxx.xxx.xx:41008 216.52.190.1:53
ESTABLISHED 28457/spamd child
unix 3 [ ] STREAM CONNECTED 120878416 28457/spamd
child
unix 2 [ ] DGRAM 120872220 28457/spamd
child
unix 2 [ ] STREAM CONNECTED 120847759 28457/spamd
child
unix 2 [ ] STREAM CONNECTED 120832442 28457/spamd
child
Environ:
Process ID: 23944 has been killed
Restuls for PID: 23944
total 0
dr-xr-xr-x 3 nobody nobody 0 Jul 23 16:55 .
dr-xr-xr-x 206 root root 0 Jun 29 11:59 ..
dr-xr-xr-x 2 root root 0 Jul 23 17:00 attr
-r-------- 1 root root 0 Jul 23 17:00 auxv
-r--r--r-- 1 root root 0 Jul 23 16:55 cmdline
lrwxrwxrwx 1 root root 0 Jul 23 17:00 cwd -> /
-r-------- 1 root root 0 Jul 23 17:00 environ
lrwxrwxrwx 1 root root 0 Jul 23 16:55 exe -> /usr/bin/perl-bin
dr-x------ 2 root root 0 Jul 23 17:00 fd
-rw-r--r-- 1 root root 0 Jul 23 17:00 loginuid
-r-------- 1 root root 0 Jul 23 17:00 maps
-rw------- 1 root root 0 Jul 23 17:00 mem
-r--r--r-- 1 root root 0 Jul 23 17:00 mounts
lrwxrwxrwx 1 root root 0 Jul 23 17:00 root -> /
-r--r--r-- 1 root root 0 Jul 23 16:55 stat
-r--r--r-- 1 root root 0 Jul 23 16:55 statm
-r--r--r-- 1 root root 0 Jul 23 16:55 status
dr-xr-xr-x 3 root root 0 Jul 23 17:00 task
-r--r--r-- 1 root root 0 Jul 23 17:00 wchan
Netstat:
tcp 1 0 127.0.0.1:783 127.0.0.1:40955
CLOSE_WAIT 23944/spamd child
udp 0 0 xx.xx.xxx.xxx:55606 216.52.190.1:53
ESTABLISHED 23944/spamd child
unix 3 [ ] STREAM CONNECTED 120847760 23944/spamd
child
unix 2 [ ] STREAM CONNECTED 120832442 23944/spamd
child
unix 2 [ ] DGRAM 120677444 23944/spamd
child
Environ:
So we've got a client setup with 2 domains; 1 main and 1 secondary.
The secondary domain is a 301 redirect with masking through GoDaddy. The reason for the masking is because we need the domain name to stay the same after the redirect. (So people who come in on DomainB will only see DomainB in the url bar.)
The problem: GoDaddy has uses a "zero frame" element to implement the masking and it's messing up the display of our site.
Note: The display only screws up in IE.
Primary domain: www.BristolCountyWomensJournal.com --> (This works fine.)
301 domain: www.WomensJournals.com --> (Check out the messy background!)
Anyone know of alternatives to Domain Masking?
We're running on Linux/Apache/MySQL/RoR and have a number of cron jobs that run throughout the day on our server. We've been noticing lately that at certain times of the day the site becomes really slow. When I'm online with my engineers I can mention this to them and they can check and see and say "Oh yeah, it's job XYZ that's spiking the server load."
That's great but much of the time when I notice the sluggishness my developers are offline (we're in different time zones). I'm wondering if there's a fairly easy way to track this when they're not online so we can say "Yup, last night at 10 PM your time when you noticed that it was job ABC." There has to be something that allows you to do this right?
got error with cpanel linces after force reboot
and when i try to set the licnse
i got this error
Code:
/usr/local/cpanel/cpkeyclt
Updating Internal cPanel Information.......Died at /usr/local/cpanel/Cpanel/CpKeyClt.pm line 132.
...propagated at /usr/local/cpanel/Cpanel/CpKeyClt.pm line 132.
.Done
An arbitrary file inclusion vulnerability has been discovered in the Horde
webmail application. At present, we can confirm that this security
vulnerability in question affects Horde 3.1.6 and earlier. Based on
incomplete information at this time, we also believe this affects Horde
Groupware 1.0.4 and earlier as well (cPanel does not use Horde Groupware
at this time).
cPanel customers should update their cPanel and WHM servers immediately to
prevent any chance of compromise. The patch will be available in builds
11.18.2 and greater (or 11.19.2 and greater for EDGE systems). The updated
builds will be available immediately to all fast update servers. The
builds will be available to all other update servers within one hour of
this posting.
To check which version of cPanel and WHM is on your server, simply log
into WebHost Manager (WHM) and look in the top right corner, or execute
the following command from the command line as root:
/usr/local/cpanel/cpanel -V
You can upgrade your server by navigating to 'cPanel' -> 'Upgrade to
Latest Version' in WebHost Manager or by executing the following from the
command line as root:
/scripts/upcp
It is recommended that all use of Horde 3.1.6 and earlier be stopped (on
cPanel and non-cPanel systems alike) until Horde updates can be applied.
You can disable Horde on your cPanel system by unchecking the box next to
'Server Configuration' -> 'Tweak Settings' -> 'Mail' -> 'Horde Webmail'
within WHM, and saving the page with the new settings.
I have 2 servers both have cpanel. I want to use 2nd server's mysql in my site which is on 1st server. I think thats not that hard. I don't wanna do clustering as this is temproary.
View 2 Replies View RelatedI am in the process of moving websites and emails to a new host. I am doing the transfer manually because we are gradually moving different part of the site at one time to allow developers to work on new parts.
I now want to migrate all of the email accounts off the old cpanel server to the new cpanel host. What files and settings do I need to move so settings are not lost, such as save mail and contacts?
I'm having big trouble trying to update an SSL certificate with cPanel.
I'm such a dummy that I've ended up buying 2 SSL certificates to see if that may fix it.
I now have 1 certificate for www.mydomainname.com and 1 for just mydomainname.com
I have logged into the account in cpanel and uploaded both certificates and when I view them in Security -> SSL/TLS manager -> Certificates They both display the correct host, correct issuer, and correct expire date.
But when I try to visit my site using https I get:
The certificate expired on 4/8/2008 7:59 PM.
(Error code: sec_error_unknown_issuer)
can anybody make me offers on a vps or rps with cpanel and whm?
View 4 Replies View RelatedI had a website created a few years ago. I am trying to update that website now. As ROOT, when I log into CPanel via WHM, I am unable to see a File Manager.
What would be my next steps?
Anyone here use PAX in their kernel builds? I've been trying to find a setup that works, but with no luck. stability wise.
I can run CPanel fine with just about any PAX setup, but after awhile with some settings the server eventually will get a load of over 250 and 1000 processes like it's not able to terminate them, or turn 4GB ram into like 3.2GB ram.
has anyone managed to setup cPanel /WHM with 1:1 NAT? I tried cPanel support with no luck, but I have 1:1 setup on all my IP address with no luck!
View 2 Replies View RelatedOkay does any one here know how to install svn with cpanel as all the ones i found in google it install svn but to anther apache in a diff folder like /etc/httpd/conf and not in /usr/local/apache/conf
using centos5 and installing using the yum command (i would like to use it from the site but do not know how to compile a install)
getting a VPS with either 384mb or 512mb and I would like to know what control panel uses the least amount of ram I have a choice of either cPanel or DA
View 12 Replies View RelatedI have a reseller account with site5. The last months the service has been horrible, sites down, dns down etc.. and the people there dont do a thing..
so i want to change to something else. I assume that VPS+whm+cpanel will give me something similar.
Which vps hosts are good? and which packages can you offer me? I'm paying about 19 usd a month now.
i am now unable to remove subdomains for some reason, even though it says that it is successful.
i added 2 parked domains that is to redirect to my main domain and it created the subdomain folders for me.
i went to try creating a subdomain for parked.co.cc and tried to redirect it to my main domain.
so example i created this subdomain: parked1.co.cc.maindomain.com
in the list of subdomains table, i have:
Subdomains: parked1
Root Domain: .co.cc.maindomain.com
but however it should be:
Subdomains: parked1.co.cc
Root Domain: .maindomain.com
how can i solve this? i just want to delete it now..
also for some reason my /cpanel and /webmail goes to my main hosting website url but not mine! so if i type www.maindomain.com/cpanel it goes to www.mainhosting.com:2093 etc!