Installing An ATA Drive Into An Old IDE Mobo
May 23, 2007
I have this new 160 GB drive that I got from a friend and is in great working order. I can't install it in this machine (I would love to, but one of the ports on the motherboard is snapped off, so I can only plug in one SATA drive in at a time.
So I've decided to put it into my server machine, just an old computer I setup with Linux and whatnot to be used as a network server if anyone needs to put anything on it. Plus, it's fun to toy with.
Anyway, I ran into the problem that the motherboard is IDE, which means I can't plug it into my hard drive... Is there anyway (that won't cost me an arm and a leg) to plug in this new hard drive into an old computer?
Or am I just out of luck? Incidentally, if anyone knows how to replace an SATA plug in, or knows of a cable that can plug in two cables which in turn plugs into the mobo, let me know.. that'd be awesome.
View 1 Replies
ADVERTISEMENT
Jan 4, 2007
We have tried a few amd mobo's for the AM2 processors and the one we found which worked out of the box with all the onboard stuff was discontinued. Does anyone know of a good AMD AM2 mobo which has SATA working out of the box with CentOS?
View 14 Replies
View Related
Aug 22, 2007
[url]
look at the Combo deal. basically you buy ASUS M2N-LR Socket AM2 NVIDIA nForce Professional 3600 ATX Server Motherboard - Retail and get AMD Athlon 64 X2 3600+ Windsor 2.0GHz 2 x 256KB L2 Cache Socket AM2 Processor - Retail for free.
how's this combo for a windows web server with 4gb none ECC RAM and a 2U case to go with it?
View 1 Replies
View Related
Mar 8, 2007
I just picked up an Intel D946GZIS http://www.intel.com/products/mother...gzis/index.htm
I've heard of many taking the higher quality motherboards and removing the audio post in order to fit into a nice SuperMicro case. Does anyone care of share their method of doing so? I was thinking a Dremel possibly, but I'd like to gather opinions as I'd like only to have to use this Motherboard as this will be a personal Dev server.
View 9 Replies
View Related
Jan 4, 2007
I am the happy owner of 6 Gb DDR200 PC1200 and 2 CPUs Xeon 2.4 Ghz slot 603.
I am looking for motherboard for that. Any recommendation?
What do you think about such configuration?
View 1 Replies
View Related
Mar 15, 2008
Long shot as I couldn't find anything via google but are there any socket 775 mobos that supports 16GB.
View 2 Replies
View Related
Mar 17, 2008
is there any desktop motherboard that can hold 16GB of RAM and fit supermicro 1u case?
View 11 Replies
View Related
Jan 26, 2007
1- i did Os Reload with new Hard drive for "home"
2- data "backups" drive lost
3- replaced the old home drive as "/old drive"
4- " /old drive " is now the secondry drive in my server and it has the all sites usres and evry thing
5- what i need , to trasfer, copy this sites from " /old drive " to "home"
but data center said
The /olddrive/home directory contains the contents that were previously in the /home directory. You can copy files from this directory to any other directory on your server.
The command to copy files in the UNIX environment is the "cp" command.
The user directories in /olddrive/home directory contain the web page files for the users. However, simply copying the contents over will not recreate the users or domain entries in DNS/httpd. If you wish these back you will need to recreate them manually or restore them from backups.
View 14 Replies
View Related
Feb 16, 2007
Primary drive (centos/cpanel) is corrupt
The server is displaying these errors when I tried to do an FSCK:
Bad inode IO
ext3-fs error (device(8,3)) IO Failure
I am having a new primary installed and old primary set as 2nd drive. I need to recover the cpanel domain accounts from this 2nd drive after I mount it with the method below:
mkdir /backup
mount /dev/sdb1 /backup
However, how do I actually recover these accounts in an automated process via whm? I've done this before with the same matter (corrupt primary drive, mount as 2nd, etc) but cannot exactly remember the proper steps.
View 14 Replies
View Related
Dec 28, 2007
I just purchased a brand new 10K 150GB drive. How can I take an exact copy of my current drive and transfer everything over to the new drive? I think I need to create a snapshop, or mirror it somehow.
What software will do this? I was told trueimage, but its very pricy, is there anything else?
View 8 Replies
View Related
Jul 9, 2007
I have a dedicated box and I started getting Input/output errors today.
I tried:
# fsck
fsck 1.40-WIP (14-Nov-2006)
e2fsck 1.40-WIP (14-Nov-2006)
/dev/hda2: recovering journal
fsck.ext3: unable to set superblock flags on /dev/hda2
then I tried:
# fsck -a -t ext3 /dev/hda2
fsck 1.40-WIP (14-Nov-2006)
/dev/hda2: recovering journal
fsck.ext3: unable to set superblock flags on /dev/hda2
My data is backed up, so was going to ask for a reimage, but is this an indication of bad hardware? Should I ask for a replacement drive? Is there anything else I should try on my own before going to the host?
View 6 Replies
View Related
Feb 6, 2007
I have a Win2K3 server which has 2 hard drives. I was considering backup options and I thought that I might try mirroring Drive A ==> Drive B. I would think that, then, if Drive A has a hardware failure, I could simply switch Drive B into the Primary slot (A) and the server would continue to hum along as nothing has happened. This would reduce the downtime, hopefully.
I have 3 questions.
1. Is this idea practical (will it work)?
2. What is a good software program to use fto handle the mirroring?
3. Any considerations, warnings, technical advice in regard to this method?
View 4 Replies
View Related
Jun 11, 2009
how to check using SSH if the HD is SSD drive in a linux box?
View 1 Replies
View Related
Nov 4, 2009
I've got another server comming online shortly which will be used for shared hosting. A Q9550, 8 GB DDRs, 2 1 TB SATA drives in RAID 1. I know everyone has different opinions and reasons for their partitioning decisions, so I wanted to get a feel on how you would partition the drives durring setup, and why you would do it the way you do.
View 4 Replies
View Related
Oct 23, 2009
I need your opinion on the best drive configuration for my Dell poweredge 2850 dual 3.0.
I have 6 x 72gb scsi 10k hds, and perc4 raid in server. My os will be Cent os with 4 gigs of ram installed. I want to try to make this server as redundant as possible.
Offsite backup is also in plans. I’m going to use this server for a few sites (5 - 10) that are db driven, and host small video clips as Dolphin Smart Community. Server will be colocated. Please let me know if missed something .
View 6 Replies
View Related
Oct 3, 2008
how they sell those usb hard drives that connect to the computer that can hold like 100 gb's.....
well if i hook up one of those external hard drives to my server can i use it as webspace for users?
View 14 Replies
View Related
Mar 28, 2008
im assembling my server now....waiting on the 90degree connectors. It is as follows:
SUPERMICRO CSE-512L-260B Black 14" Mini 1U Server Case
ASUS M2N-MX SE Plus AM2+/AM2 NVIDIA GeForce 6100 Micro ATX AMD Motherboard
AMD Athlon 64 X2 4200+ Brisbane 2.2GHz Socket AM2 65W Dual-Core Processor
Dynatron A48G 70mm 2 Ball CPU Cooler - Retail
2gb ddr2 6400 ram
Seagate 500gb 7200.11 32mb hdd
WD 37gb raptor 10k rpm
the wd drive was lying around the house so i figured id add it since i had an extra slot and figured the speed wouldnt hurt.
My question is....how should i partition the drives.? I have 500+gb of space on 2 hard drives. I plan on using centos 5.1 and am downloading the iso now.
View 1 Replies
View Related
Jul 26, 2008
Now iam useing 320Gig SATA harddrive as my primary hard drive,i dont use 2rd harddrive,iam haveing pure download site,in TOP command 4.5%wa is this bit high? or can i add 2rd harddisk and move some data to there to reduce wa,but my load of the server is fine or any way to reduce wa?
View 1 Replies
View Related
Jun 11, 2007
I am running a Fedora box with cPanel...
The hard drive has a capacity of 36 gigs and there's currently 18 GIGs of data on it.
When I do "df -h", it indicates that / has 85% of it's capacity in use. When I run "df -hi" it shows that / has 58% of it's inodes in use.
Is there anything I can do to increase /'s capacity? Can I free up some inodes? All that / contains are folders.
View 4 Replies
View Related
Sep 13, 2007
Just got this server setup, getting some smart errors. Here's a copy of the trouble ticket I posted to the host, they said "If you read through the documentation for smartd you will find that from the results you pasted, your hard disk passed every test. We can give you another hard disk if you want but we will have to charge you 3 credits for the reinstall of the operating system." I could be wrong, maybe everything's fine, but the fact that there are unreadable sectors reported has me a little worried.
Quote:
What is the nature of the problem?
New server, hard drive failing smart tests
What is the error message?
Sep 12 17:51:43 sls-db8p19 smartd[3312]: Device: /dev/hda, found in smartd database.
Sep 12 17:51:43 sls-db8p19 smartd[3312]: Device: /dev/hda, is SMART capable. Adding to "monitor" list.
Sep 12 17:51:43 sls-db8p19 smartd[3312]: Monitoring 1 ATA and 0 SCSI devices
Sep 12 17:51:43 sls-db8p19 smartd[3312]: Device: /dev/hda, 2 Currently unreadable (pending) sectors
Sep 12 17:51:43 sls-db8p19 smartd[3312]: Sending warning via mail to root ...
Sep 12 17:51:43 sls-db8p19 smartd[3312]: Warning via mail to root: successful
Sep 12 17:51:43 sls-db8p19 smartd[3312]: Device: /dev/hda, 2 Offline uncorrectable sectors
Sep 12 17:51:43 sls-db8p19 smartd[3312]: Sending warning via mail to root ...
Sep 12 17:51:44 sls-db8p19 smartd[3312]: Warning via mail to root: successful
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 066 062 006 Pre-fail Always - 78282665
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 19
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 2
7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 29797813
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1175
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 27
194 Temperature_Celsius 0x0022 030 048 000 Old_age Always - 30
195 Hardware_ECC_Recovered 0x001a 066 062 000 Old_age Always - 78282665
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 2
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
Was it working before?
No, brand new server
If it was working before, did you do anything before this error occurred?
N/A
Have you done anything after this error occurred?
View 1 Replies
View Related
Aug 21, 2007
I use the second hard drive as backup drive. Today as normal i check the backup directory and try to use ls command. I got this warning
[root@xxxxxx backup]# ls
ls: reading directory .: Input/output error
View 14 Replies
View Related
May 3, 2007
I want to start selling vps to customers but don't want to over load my existing drive/ server would it be beneficial to sell vps off a second drive so im keeping my shared hosting separate from the vps hosting
View 5 Replies
View Related
Sep 4, 2007
My server has 2 drives,one is backup drive. The backup drive seem to be failing so i decide to remove it. However when i remove it,the system can not boot. ANyone got this issue?
View 14 Replies
View Related
Jun 18, 2007
I have to transfer files from the network computers on the server and make a db .
I have read bugs.php.net 1
and bugs.php.net 2
all the computers from my network are apple.
when I make MAP NETWORK DRIVE and make the php.ini include_path changes, i don't get nothing.
View 0 Replies
View Related
Jun 30, 2005
This is a little samba guide from my own experiences of how to map a network drive under windows 2000 to a Linux server. I am not technical expert and this guide is the result from my trail and error.
What's Samba?
Samba allows Linux computers to share files and printers across a network connection. By using its SMB protocol, your Linux box can appear in Windows Network Neighborhood or My Network Places just like any other windows machine. You can share files this way, as well as printers. By using samba on my home network, for example, my Windows machines have access to a printer directly hooked up to my Linux box, and my Linux box has access to a printer directly hooked up to one of my Windows machines. In addition, everyone can access everyone else's shared files. You can see how samba can be very useful if you have a network of both Windows as well as Linux machines.
My OSs
Windows 2000
RHEL 3 (Redhat Enterprise Linus)
My goal
Map a network drive to Linux servers, so that I can access the Linux files under windows 2000.
Installation
Most Linux should have Samba already installed. But if it hasn't install, you can find at in http://rpmfind.net or using up2date command "up2date -i samba". You can also get it at http://www.samba.org
Then you can install it by tying the following Command:
Install:
rpm -i samba.rpm
Upgrade:
rpm -U samba.rpm
Configuration
Samba conf file is located at /etc/samba/smb.conf, allows you to specify which resources on the Linux machine you wish to share and who they can be accessed by.
Samba provide a full version conf if it's fresh install. But most of the times, we don't really need all of these options. So I provide my own conf here, which is rather simple, but it makes things work.
[global]
workgroup = WORKGROUP
server string = LinuxBOX
hosts allow = your_windows_machine_IP
log file = /var/log/samba/%m.log
security = user
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
[Downloads]
comment = Downloads
path = /path_to_your_sharefolder
browseable = yes
writable = yes
public = yes
read only = no
[homes]
comment = My Home Directory
browseable = yes
writable = yes
public = yes
read only = no
[printers]
path = /var/spool/samba
public = yes
guest ok = yes
printable = yes
browseable = yes
writable = yes
read only = no
Just replace workgroup to your windows workgroup name, your_windows_machine_IP and /path_to_your_sharefolder. If you don't need printers sharing, you don't need to have printer section.
Setup Samba Users
Since we're using user level security, we need to setup samba users. This can be easily done by using Webmin. You can go to Server --> Samba --> Convert Unix users to Samba users, you can just covert all your existing Linux users and set them password under the icon "Edit Samba users and passwords" later.
If you don't use webmin, you can also type the following command:
cat /etc/passwd | mksmbpasswd.sh > /etc/samba/smbpasswd
smbpasswd username
Replace username with each of your user's usernames. You will then be prompted to enter a password for this user account.
Samba Service
Now, it's time to start your samba server:
service smb start
service smb stop
service smb restart
Once the computer is restarted or shutdown, the samba service won't start up again in next boot up. I use webmin to make it startup at boot time.
Windows 2000 Configuration
1. Under windows 2000, you can got to windows explorer --> Tools --> map a network drive
2. select drive letter
3. enter the path (e.g. your_server_ipDownloads)
4. click connect using different user name
5. enter your samba usernaem and password that you just set
6. You can connect to your Linux machine now!
This method work for me. If there is any correction or improvements, please let me know.
View 0 Replies
View Related
Jun 28, 2007
I'm a little familiar with Linux, but I need help setting up a second drive that is in the server I'm leasing from Layered Technologies. It's a self-managed server so they won't even TELL me how to do it.
I need to format the drive and mount it as /backup so I can setup WHM/Cpanel to use it for backups.
What commands do I need to type to format the drive with the right kind of partition and mount it as /backup?
View 2 Replies
View Related
Mar 29, 2009
The problem is that my hd is failed. Hoster setup new server, also installed the secondary drive but not mounted. So need advice how can i get my data off it?
View 3 Replies
View Related
Apr 23, 2009
I cannot enable DMA mode on /dev/hda when attemping to enable it via ssh
Code:
hdparm -d1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
Code:
hdparm -tT /dev/hda
/dev/hda:
Timing cached reads: 1632 MB in 2.00 seconds = 814.90 MB/sec
Timing buffered disk reads: 8 MB in 3.42 seconds = 2.34 MB/sec
I am running CentOS 4.7 and cPanel 11. cPanel also shows DMA is not enable on this drive. Kernel: 2.6.9-78.0.13.ELsmp
Code:
cat /boot/config-2.6.9-78.0.13.ELsmp |grep DMA
CONFIG_GENERIC_ISA_DMA=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_PDC_ADMA=m
Code:
hdparm -i /dev/hda
/dev/hda:
Model=WDC WD2500JB-00REA0, FwRev=20.00K20, SerialNo=WD-WMAN542173
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
View 8 Replies
View Related
Mar 28, 2009
one of my servers has 2x250gb hard drives in hardware RAID 0 using a 3ware controller, but ive now got the following error message 3 times prior to 3 server crashes, my server supplier beleves it one of the drives failing (i have backups on a non raid drive so rthats fine) but i suspect the controller, whats everyone else think...
Code:
Mar 28 22:41:46 server kernel: sd 2:0:0:0: WARNING: Command (0x2a)
timed out, resetting card.
Mar 28 22:42:39 server kernel: 3w-xxxx: scsi2: Command failed: status
= 0xc7, flags = 0x1b, unit #0.
Mar 28 22:43:08 server kernel: 3w-xxxx: scsi2: Command failed: status
= 0xc7, flags = 0x1b, unit #0.
Mar 28 22:43:12 server kernel: 3w-xxxx: scsi2: AEN: WARNING: ATA port
timeout: Port #1.
View 2 Replies
View Related
Apr 19, 2009
I just received:
[cPanel smartcheck] Possible Hard Drive Failure Soon
ATA Error Count: 1512 (device log contains only the most recent five errors)
Error 1512 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
Error 1511 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
Error 1510 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
Error 1509 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
Error 1508 occurred at disk power-on lifetime: 11736 hours (489 days + 0 hours)
----END /dev/sda--
What do you advice me to do? ask the DC to change the Hard Drive or wait till damaged?
I already have a weekly external Backup.
View 14 Replies
View Related
Nov 13, 2008
Hard drive arrangement
I have a terminal server with a bunch of applications on it, among which is a database driven app. There have been complaints that access to the db is sluggish. right now the server is on just one 7.2k drive.
I am guessing its a hard drive bottleneck because memory and cpu usage seems okay. I have a few ideas. Please tell me which of these you would recommend.
1. Upgrade entire server to raid 10 system.
2. Upgrade the entire server to a 5-disk RAID 5 system.
3. Create two raid 1 setups. One for the OS and regular apps, the second one to host the DB.
4. Create a raid 1 setup for the OS and regular apps, and a RAID 5 setup for the DB.
Ideally I would like to see improved read/write speeds on both regular files/apps and on the database. The RAID 10 system was what I was leaning towards at first because the stripping increases throughput, but then I realized I may see better performance by keeping the regular files and the DB on independent setups so that OS and file read/writes won't affect the DB read/writes.
View 5 Replies
View Related