High-End Linux Hosts
Aug 27, 2008
My company's done shared hosting with our web site thus far. (I've gathered that the best of the best in shared hosting include Steadfast, DowntownHost, HostGator, Lunar Pages, and WebzPro. Any to add to the list, feel free!)
We're now thinking about moving to higher end hosting, i.e. a dedicated or managed server. So my questions are:
- Who are the biggest names and best quality Linux hosts in this category? That is, if those I mentioned above are "bargain" hosts, who are the "high end" hosts?
- What is the difference between a "virtual private server," a dedicated server, and a managed server? Ideally we'd like to still have a hosting package where security is taken care of and there's a lot of customer support to fix problems, but with our own dedicated resources.
View 11 Replies
ADVERTISEMENT
Mar 14, 2009
On my way searching for an hosting provider, I try pinging every host.. some of them have packets lost, one between 20-30%.
View 10 Replies
View Related
Oct 7, 2008
Im a webdesigner so when looking for hosting i try to find one that is simple to manage, hardware powerful, lots of ready to install scripts and a beautiful webmail like Atmail or Zimbra.
So im looking for a powerful / quality high end "shared" hosting package.
Until now i have looked at:
- Mediatemple
(as @mail, exelent support but slow in Europe)
- Mosso
(is always good to be powered by rackspace but i think that the cloud hosting concept is still unsstable. Any experience?
- SimpleHelix (realy fast magento demo store, lots of scripts, @Mail and seems to have a fast network to europe)
So any advices on premium shared hosting?
An in Europe, any company similar to mediatemple or simplehelix?
Budjet: up to 100 $
View 8 Replies
View Related
Nov 14, 2014
This is my free -m
total used free shared buffers cached
Mem: 1998 1903 95 0 45 542
-/+ buffers/cache: 1315 683
Swap: 2662 36 2625
Not good ....
I got 5 wordpress and 5 statics website on this server and 100 visitors by 24H00 each day.
Question 1 : Why the memory is so low and the swap so high ?
Question 2 : Why i don't find high usage process in top command ?
Question 3 How can i resolve this problem ?
View 2 Replies
View Related
May 4, 2007
What Linux web hosts out there know their stuff when it comes to securing and optimizing Linux based servers? As someone in another thread brought up, if a host doesn't know how to secure and run a server/server software, it doesn't matter what wonderful things they have installed.
View 4 Replies
View Related
Feb 13, 2015
I installed a new certificate, made it default, assigned it to the shared ip address and made the plesk panel use it.
The problem is we have 200 virtual hosts using the old certificate. Is there a way to reconfigure all those domains easily.
View 13 Replies
View Related
Jul 18, 2014
After changing my web hosting (same system : VPS, same version of linux : CentOS 6 , but passage from Plesk 11 to 12), i am now unable to connect remotely via TCP-IP to my mysql databases (with third-party tools like Mysql Workbench, Toad...) ! I never met this problem before.
The only way to connect is to use a "Standard TCP-IP over SSH" connection method ... but i don't want (i did'nt need this method before) !
Though, remote connections are allowed from any host in the settings.
View 3 Replies
View Related
Apr 2, 2008
I was in the market for a new dedicated server after a couple of years with my previous provider. The previous provider did nothing wrong but they were no longer competitive when it came to CPU and memory.
I moved first to geekrack. And I left them after a week and a half as they never were able to get my rDNS records setup.
I found Universal Hosts on this forum and gave them a shot. I had asked for an operating system that they didn't offer normally (Debian 64 bit) and they said that they could do it. However, when my server was setup it was 32 bit Debian instead. They apologized and had Debian 64 bit setup less than 24 hours later.
When I asked them to get rDNS records setup it took a few hours but they were setup correctly and they worked.
Universal Hosts is also a BurstNet reseller but compared to my other attempt at using a BurstNet reseller they are fantastic. While the initial config was incorrect they worked quickly to fix it and were very professional about it.
So after two weeks - so far so good. Keep up the good work UniHosts!
View 1 Replies
View Related
Aug 11, 2013
I am running Apache2.2, PHP5.I have been running with virtual hosts on a Windows 7 environment fine for a couple of years successfully, but have just had to move to a Windows 8 environment.It looks like Apache and PHP have installed and are working fine, but my Virtual hosts are now not being recognised. From what I can tell, it is the Windows 8 hosts file that is having a problem, as it looks as though it is now just setup to Block websites.
If I make the host file just have the one line127.0.0.1 localhost entry, then the very first Virtual Host from my apache config file will come up, but the rest are not found.If I put the usual 127.0.0.1 mywebsite.name aliasname is appears as though my website works momentarily and then is blocked..
View 7 Replies
View Related
Apr 27, 2007
This is a RHEL3 box. It has a couple hundred sites, most of which are pretty quiet most of the time, lately I can't get the load below 3 most of the time. I've tried all the usual TOP PS and the rest, but I'm not seeing my problem. I've attached a text file with extended outputs. but here's what I'm seeing now from TOP and VMSTAT. I'm not sure what else I could be looking at.
I've been watching, and it seems to be Apache most of the time at the top of TOP, and I'm logging slow-queries for myslq, but there aren't many there.
top
10:02:03 up 3 days, 21:23, 2 users, load average: 2.81, 2.83, 3.05
140 processes: 137 sleeping, 2 running, 1 zombie, 0 stopped ....
View 0 Replies
View Related
Mar 12, 2015
at 6 in the morning sa-learn / spamtrain starts to learn from junk mails.This causes high load on the system und takes about 2-3 hours.Is there any way to change the time to some hours earlier to avoid high load in office hours?
nice -n 19 ionice -c2 -n7 /usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php >/dev/null 2>&1
... to solve the issue, that it didn't seem to have any effect to your CPU/IO usage. Please try as well the full path, if you experience issues, as for example:
/usr/bin/nice -n 19 /usr/bin/ionice -c2 -n7 /usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php >/dev/null 2>&1. Please make sure, that "nice" and "ionice" are located at the given paths and don't just copy&paste the suggestion with the whole path - usage ( you could use "locate nice" / "locate ionice" to verify the paths ).
You asked as well for a different execution time, to avoid high usage during office hours. I would recommend to try several spamtrain - cronjobs, which you might setup with
For Plesk 11 you would use:
nice -n 19 ionice -c2 -n7 /usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php -f execute-spamtrain >/dev/null 2>&1
/usr/bin/nice -n 19 /usr/bin/ionice -c2 -n7 /usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php -f execute-spamtrain >/dev/null 2>&1
For Plesk 12 you would use:
nice -n 19 ionice -c2 -n7 /usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php -f ExecuteSpamtrain >/dev/null 2>&1 /usr/bin/nice -n 19 /usr/bin/ionice -c2 -n7 /usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php -f ExecuteSpamtrain >/dev/null 2>&1
or use the direct command with: nice -n 19 ionice -c2 -n7 /usr/local/psa/admin/sbin/spamtrain >/dev/null 2>&1/usr/bin/ nice -n 19 /usr/bin/ionice -c2 -n7 /usr/local/psa/admin/sbin/spamtrain >/dev/null 2>&1
If you still would like to exclude one of the daily DailyMaintenance - cronjobs from your "50plesk-daily" script, you have to modify the line /usr/local/ psa/ bin/ sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php >/dev/null 2>&1
to all different parts like:
/usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php -f Plesk-COMMAND-name1
/usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php -f Plesk-COMMAND-name2
/usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php -f Plesk-COMMAND-name3
where you have to leave out the commands, which should not be executed daily. ( Please see the current Plesk-commands for the DailyMaintenance - script with "/usr/local/psa/bin/sw-engine-pleskrun /usr/local/psa/admin/plib/DailyMaintainance/script.php -l" and be aware that Plesk 11 and Plesk 12 have different commands! )
From time to time, it is wise to clean up the spamassassin - database ( as you already found out with the linked forum-thread), but I would recommend a 6-month-cronjob and not a monthly one. that spamtraining with spamassassin can be very time investing and you should try out addons, filters and rules to find the most efficient configuration for each, unique server - unfortunately there is no "best-for-all" solution.
View 7 Replies
View Related
May 31, 2008
We just ordered a new Dell server and trying to decide which flavor of Linux to use. The server is going to be used exclusively for a MySQL 5 database.
The MySQL database is very large about 9 gigs, (GIS data), and will be hit quite hard.
I was looking at CentOS and Fedora.
Here is the server specs:
2 Intel Quad Core Xeon 5410 2.33GHZ
8 Gigs Ram
2 146GB 15000RPM SAS Drives In Raid 1
View 14 Replies
View Related
Aug 22, 2007
What are new methods to High secure a linux server ? (For webhosting company)
Please write something you know for Linux Security Methods (New version of OS).
View 14 Replies
View Related
Jul 23, 2015
The server is idle, according to TOP.
Health center shows
Total usage
6056039.4% used 2198044.96
nginx CPU usage
156.5 % 3250.89
Mail server CPU usage
203.6 % 4844.61
MySQL CPU usage
12.2 % 10.28
Plesk CPU usage
164.6 % 95111.06
Getting tired of all the notifications plesk sends to my phone....
EDIT:
Happens everytime i reboot the server.
After about 15 minutes the stats normalise.
View 1 Replies
View Related
Jul 23, 2014
Since the update our Server Health has been very high and is playing up with email and probably other services.
OS CentOS 6.5 (Final)
Plesk version 12.0.18 Update #8, last updated at July 16, 2014 11:20 AM
The system is up-to-date; last checked at July 19, 2014 04:41 AM
Services !Problem
Disk OK
Memory OK
CPU !Problem
Network
This is the log from /var/log/plesk/health-alarm.log
##################################################
2014-06-24T10:01:15+11:00 INFO (6): Server health parameter "Services > Panel CPU usage" changed its status from "green" to "red".
2014-06-24T10:21:16+11:00 INFO (6): Server health parameter "Services > Apache CPU usage" changed its status from "red" to "green".
[Code].....
View 1 Replies
View Related
Mar 23, 2015
I have a single mysql process that never stops and running with 10-200% CPU load: URL....
I restart mysql => process coming back
I restart server => process coming back
I kill process => process coming back
I have run:
# mysqladmin -uadmin -p`cat /etc/psa/.psa.shadow` -i 1 processlist
but there was noting that runs >10min.
Code:
> SHOW FULL PROCESSLIST;
+------+-------+-----------+------+---------+------+-------+-----------------------+
| Id | User | Host | db | Command | Time | State | Info |
+------+-------+-----------+------+---------+------+-------+-----------------------+
| 328 | admin | localhost | psa | Sleep | 56 | | NULL |
| 8110 | admin | localhost | NULL | Query | 0 | init | SHOW FULL PROCESSLIST |
+------+-------+-----------+------+---------+------+-------+-----------------------+
2 rows in set (0.00 sec)
I have strace the PID
Code:
# timeout 1m strace -f -c -p 5873
Process 5873 attached with 30 threads - interrupt to quit
Process 10499 attached (waiting for parent)
Process 10499 resumed (parent 5873 ready)
Process 10502 attached (waiting for parent)
Process 10502 resumed (parent 5873 ready)
Process 10503 attached (waiting for parent)
[code]....
I found with google a hint for high cpu URL....I have deinstalled "health monitor" module, but that was not the reason.I use plesk 12.0.18 Update #38 with CentOS 6.6 (Final).
View 2 Replies
View Related
Dec 10, 2014
Today, without any change on the server side my single running website on my server started running low. After checking the running processes I realised I have these 8 processes running with high cpu load something that didn't had before.
4245 user 20 0 283m 103m 10m R 85.1 0.3 6:44.88 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4243 user 20 0 241m 68m 8736 R 83.8 0.2 6:33.45 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4259 user 20 0 254m 82m 8720 R 83.5 0.3 6:11.00 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4244 user 20 0 282m 103m 10m R 82.1 0.3 6:46.49 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4247 user 20 0 248m 76m 8712 R 78.8 0.2 6:50.31 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
4264 user 20 0 258m 85m 8712 R 72.9 0.3 6:49.83 /usr/bin/php-cgi -c /var/www/vhosts/system/domain/etc/php.ini
apache error log doesn't show any warnings, errors.
View 4 Replies
View Related
May 20, 2014
PRODUCT, VERSION, OPERATING SYSTEM, ARCHITECTURE
Parallels Plesk Panel 11.5.30 MU #44 CentOS 6.5 (Final) 64bit
2 of our our servers are suddenly experiencing high Wait I/O Times, and high Load Averages during the backup process. During this period the Plesk grinds to a halt, sometimes crashing out completely (although SSh is still possible. We have been in talks with our server suppliers (assuming this would be node related) however they have done a lot of testing etc. and categorically state the node is fine , with no other users affecting it.
STEPS TO REPRODUCE : We backup the server using the scheduled backup service and Wait I/O immediately goes up.
ACTUAL RESULT: Plesk downtime / Website downtime
EXPECTED RESULT: No downtime, successful back up
Some other info :
All other processes (MYSQL, apache, Nginx etc) are all running between 1 - 10%
Partition "/usr" utilization 4.2% used (1.81 GB of 43.3 GB) (?)
Partition "/var" utilization 50.6% used (61.8 GB of 122 GB) (?)
We are struggling to identify what has changed on the server that would cause this sudden change.
View 3 Replies
View Related
May 12, 2014
I have been trying to identify why mi server has high load cpu, suddenly CPU load suddenly jumps, from 1 to 40 and until 110
If I restart mysqld and apache, the cpu gets back to normal, until this happen again
My server is
GenuineIntel, Intel(R)Core(TM) i5-2400 CPU @ 3.10GHz
VersionParallels Plesk Panel v11.0.9_build110120608.16 os_CentOS 6
CentOS 6.4 (Final)
CentOS 6 x64 Processor: Intel Core i5 - 3.10 GH
I already installed FAIL2BAN and DDOS DEFLATE without lock. I have CloudFlare Enabled.
When there is a high CPU load, I have checked netstats, and I don't identify many ips connected, so I think it could be an internet script (or virus).
I will paste the result of
ps fax
command, in a moment of high cpu load
View 7 Replies
View Related
Aug 16, 2008
Recently I stumbled along a host on here with a good rep and that uses direct admin.
Because they were very nice on the live support I signed up to see what direct admin was like.
Its very diferent from cpanel. Some parts seem to be harder to use like the phpmyadmin requires the username and password to the database you created not the control panel username and password like cpanel. Although I guess that could be a good security feature just in case some one gets into the control panel they can not get into the phpmyadmin, then again if they are smart and were able to get into the control panel they could get into ftp and look what the username and password is on the config file for the script you are using.
The bandwidth meter seems to be better in direct admin although I think its acting up for me as its putting yesterdays bandwidth on todays. I was told by the host that it updates every 2 hours and at first it did but now its gone to every day. Oh and unlike cpanel this bandwidth meter includes bandwith used by the control panel.
Niether one from what I can tell counts sftp though at least for the hosts I have right now.
View 14 Replies
View Related
Feb 20, 2008
I have a cPanel server with 4GB RAM
My server hangs time to time, once or twice a day. This is the last status when it happens.
Server Load 75.90 (2 cpus)
Memory Used 92 %
Swap Used 65.78 %
When I was still inside SSH when it happens, the processes I can see inside "top" are a lot of httpd processes.
So I "killall -9 httpd", I had to do it 30~40 times
#killall -9 httpd
#killall -9 httpd
#killall -9 httpd
x 30~40 times until no pid process found & the server load is back to normal.
Before that, I check httpd fullstatus, they look very normal, same goes to what I see inside WHM Apache status & cpu usage status.
At first I thought it was a memory problem after consulting with a server admin, so I replaced all 4GB new ram stick (such a waste)
View 12 Replies
View Related
May 17, 2014
Our server is running; Plesk 11.0.9 and CentOS 5.7 it has a Q8200 CPU @ 2.33GHz and 2GB of RAM. Now there are just two websites on the server plus a couple of redirects/forwarding domains, although lots of domains are still on the server but turned off in Plesk. Both websites are OSCommerce sites and I just need to keep these sites going until the end of the year when we will switch to our new Joomla based website.
We have seen an increasing number of server crashes and after various checks of the logs, fitting a new BIOS battery, check of the hardware by EasySpace who host the server, installation of ClamAV, LMD and RKHunter (which did find some Trojans and Suspect software), I have traced it down to some external Http activity that is taking all of my CPU time and RAM. Here is a screen capture of the Htop listing and when I killed these processes the CPU and RAM went back to normal. The problem is that I usually have to restart the HTTPD service and sometimes things get so bad that the server crashes and I have to request a power cycle.
View 8 Replies
View Related
Oct 31, 2009
My server is very slow, High CPU, High Apache load....
I got a new server and i had setup a script on it.
No server tweaks has been done.
I run a filehosting site so it gets very slow when traffic is high.
Here is some info:
Code:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4135 filedip 19 0 12812 8892 2212 R 18.9 0.4 0:00.74 index.cgi
3140 apache 15 0 22624 9604 2768 S 17.3 0.5 1:54.45 httpd
3556 apache 15 0 22792 9592 2768 S 17.3 0.5 0:43.53 httpd
3739 apache 15 0 22672 9556 2744 S 17.3 0.5 1:09.67 httpd
3884 apache 15 0 22664 9560 2744 S 17.3 0.5 0:23.98 httpd
3474 apache 15 0 22672 9572 2756 R 16.1 0.5 1:34.09 httpd
3548 apache 15 0 22792 9560 2740 S 16.1 0.5 1:33.67 httpd
3991 apache 15 0 22640 9588 2756 S 15.1 0.5 0:22.44 httpd
3475 apache 15 0 22672 9580 2756 S 13.2 0.5 1:31.42 httpd
3493 apache 15 0 22664 9592 2768 S 12.9 0.5 1:15.52 httpd
3769 apache 15 0 22664 9580 2756 S 12.9 0.5 0:45.19 httpd
3638 apache 15 0 22664 9576 2756 S 12.3 0.5 0:32.82 httpd
3724 apache 16 0 22664 9580 2756 R 12.3 0.5 0:34.25 httpd
3626 apache 15 0 22672 9580 2756 S 11.7 0.5 0:52.54 httpd
4023 apache 16 0 22792 9560 2740 R 11.3 0.5 0:13.16 httpd
3882 apache 15 0 22664 9576 2756 S 10.1 0.5 0:38.56 httpd
3005 apache 15 0 22672 9588 2768 R 9.1 0.5 2:06.61 httpd
I dont know much about server managment...
how to fix this so server doesnt go slow?
View 6 Replies
View Related
Jul 2, 2009
I have a site that is eating up my server resources and need to know what the best solution for this is. I'm thinking of getting another server just for mysql but do not know what specs the server should be to handle the current traffic/database load and have the site run smoothly without slowing down to a snail's pace.
An alternative is to get another server just for the videos being served and leave the database and html on the current server. This is where I'm stuck and don't know what route to take with this.
My current server stats:
Dual Xeon 5130
4GB RAM
250GB
50 Mbit/sec
CentOS 3.9
Website traffic stats:
15,000 visitors/day
150,000 pageviews/day
Serving videos
I've attached screenshots of top and bandwidth usage per day. Hopefully with this information you could tell me if I need another server or if there are any things I can do to the current server to help things move faster.
View 13 Replies
View Related
Jul 2, 2008
I am running in a High load problem lately. I have one of those cheap 1and1 servers which was running fine until 2 weeks ago. Once I rebooted accidentaly, it did not come back with some unrepairable kernel errors and I had to re-image it.
I chose to reimage the server with CentOS 5, for better support. The new re-image worked fine for some days, at least so I thought and now I am having high loads. The server crashes if not monitored every moment as the load is unpredictable.
Just a restart of the Apache will bring the server back to normality, but I am not sure if it is apache or some other script to be blamed.
I have beeing monitoring through apache server-status, but I cannot organize something unusual in the high load moments.
At this moment for example:
top - 09:00:36 up 15:43, 3 users, load average: 3.57, 4.60, 5.32
Tasks: 144 total, 2 running, 142 sleeping, 0 stopped, 0 zombie
Cpu(s): 10.6%us, 6.5%sy, 0.0%ni, 18.7%id, 63.5%wa, 0.2%hi, 0.5%si, 0.0%st
12:00:29 AM CPU %user %nice %system %iowait %steal %idle
12:10:01 AM all 9.14 0.00 5.52 44.66 0.00 40.68
12:20:14 AM all 6.83 0.00 3.98 27.88 0.00 61.32
12:30:10 AM all 6.44 0.00 4.20 81.25 0.00 8.11
12:40:09 AM all 5.25 0.00 4.09 81.93 0.00 8.73
12:50:15 AM all 5.11 0.00 3.79 90.74 0.00 0.36
01:00:07 AM all 7.22 0.00 4.52 57.11 0.00 31.15
01:10:13 AM all 6.89 0.00 4.01 55.38 0.00 33.71
01:20:14 AM all 4.37 0.00 3.27 41.88 0.00 50.48
01:30:25 AM all 4.26 0.00 3.29 63.42 0.00 29.03
01:40:06 AM all 27.18 0.00 4.75 58.27 0.00 9.80
01:50:03 AM all 29.64 0.00 6.61 51.50 0.00 12.25
02:00:07 AM all 27.00 0.00 8.48 55.49 0.00 9.03
02:10:10 AM all 19.29 0.00 4.97 73.80 0.00 1.94
02:20:04 AM all 37.85 0.00 6.78 40.70 0.00 14.67
02:30:05 AM all 15.65 0.00 4.80 68.47 0.00 11.08
02:40:08 AM all 9.06 0.00 5.60 37.49 0.00 47.86
02:50:07 AM all 5.36 0.00 3.62 42.29 0.00 48.73
03:00:02 AM all 6.05 0.00 4.08 47.27 0.00 42.60
03:10:02 AM all 4.22 0.00 3.68 38.17 0.00 53.93
03:20:02 AM all 4.06 0.00 3.75 41.37 0.00 50.82
03:30:22 AM all 4.42 0.00 3.93 45.25 0.00 46.41
03:40:11 AM all 4.34 0.00 3.95 39.58 0.00 52.13
03:50:02 AM all 4.67 0.00 4.01 32.53 0.00 58.80
04:00:08 AM all 3.72 0.00 3.87 28.40 0.00 64.02
04:10:02 AM all 13.49 0.00 6.58 20.82 0.00 59.10
04:20:01 AM all 6.70 0.00 4.63 6.06 0.00 82.61
04:30:02 AM all 1.44 0.00 1.21 4.75 0.00 92.59
04:40:01 AM all 12.42 0.00 8.12 7.65 0.00 71.81
04:50:02 AM all 1.43 0.00 1.07 4.02 0.00 93.47
05:00:02 AM all 1.60 0.00 1.40 8.62 0.00 88.38
05:10:10 AM all 3.80 0.00 3.02 17.86 0.00 75.32
05:20:06 AM all 5.10 0.00 4.22 23.34 0.00 67.34
05:30:02 AM all 1.54 0.00 1.40 11.22 0.00 85.85
05:40:05 AM all 1.75 0.00 1.89 13.12 0.00 83.23
05:50:12 AM all 2.15 0.00 2.22 18.92 0.00 76.72
06:00:02 AM all 1.92 0.00 2.01 12.87 0.00 83.20
06:10:02 AM all 2.27 0.00 2.16 11.53 0.00 84.04
06:20:03 AM all 3.56 0.00 3.02 25.26 0.00 68.16
06:30:10 AM all 2.66 0.00 2.05 18.13 0.00 77.16
06:40:02 AM all 2.58 0.00 2.25 22.87 0.00 72.30
06:50:02 AM all 2.68 0.00 1.92 15.77 0.00 79.63
07:00:03 AM all 3.06 0.00 2.48 26.01 0.00 68.46
07:10:03 AM all 3.65 0.00 3.20 36.54 0.00 56.61
07:10:03 AM CPU %user %nice %system %iowait %steal %idle
07:20:03 AM all 4.40 0.00 3.28 43.86 0.00 48.46
07:30:02 AM all 4.10 0.00 3.17 31.30 0.00 61.43
07:40:06 AM all 7.67 0.00 3.95 50.79 0.00 37.59
07:50:02 AM all 4.72 0.00 3.11 44.30 0.00 47.86
08:00:03 AM all 5.57 0.00 3.72 47.15 0.00 43.56
08:10:07 AM all 10.66 0.00 3.59 71.62 0.00 14.13
08:20:17 AM all 5.67 0.00 3.42 58.81 0.00 32.10
08:30:10 AM all 11.12 0.00 3.49 76.71 0.00 8.67
08:40:03 AM all 7.00 0.00 3.36 47.94 0.00 41.71
Average: all 7.53 0.00 3.76 38.90 0.00 49.81
Some configurations:
The reimage partittioning looks like this:
/dev/sda1 950M 138M 765M 16% /
/dev/sda5 4.7G 1.9G 2.9G 40% /usr
/dev/sda7 63G 58G 5.0G 93% /var
/dev/sda6 4.7G 23M 4.7G 1% /home
none 1.0G 500K 1.0G 1% /tmp
KeepAlive On
MaxKeepAliveRequests 300
KeepAliveTimeout 15
<IfModule prefork.c>
StartServers 10
MinSpareServers 20
MaxSpareServers 50
ServerLimit 256
MaxClients 180
MaxRequestsPerChild 2000
</IfModule>
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
skip-locking
query_cache_limit=1M
query_cache_size=32M
query_cache_type=1
max_connections=250
interactive_timeout=100
wait_timeout=20
connect_timeout=10
thread_cache_size=80
key_buffer=64M
join_buffer=1M
max_allowed_packet=16M
table_cache=512
record_buffer=1M
sort_buffer_size=1M
read_buffer_size=1M
max_connect_errors=10
thread_concurrency=2
read_rnd_buffer_size=1M
myisam_sort_buffer_size=64M
server-id=1
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 3
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 4
cpu MHz : 2793.324
cache size : 1024 KB
View 10 Replies
View Related
Nov 8, 2008
I have extremely high CPU load average, but when I run TOP command there are not any process with high CPU
CPU load averages:
211.65 (1 min) 227.29 (5 mins) 247.89 (15 mins)
Tasks: 364 total, 2 running, 360 sleeping, 2 stopped, 0 zombie
Cpu(s): 0.0%us, 0.3%sy, 0.0%ni, 0.0%id, 99.7%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 2065460k total, 2012372k used, 53088k free, 60964k buffers
Swap: 2040212k total, 3280k used, 2036932k free, 619900k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
19871 root 15 0 4944 2488 1656 R 1 0.1 0:02.73 top
1 root 15 0 4208 1320 1136 S 0 0.1 0:01.55 init
2 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0
3 root 34 19 0 0 0 S 0 0.0 0:01.77 ksoftirqd/0
4 root RT 0 0 0 0 S 0 0.0 0:00.01 migration/1
5 root 34 19 0 0 0 S 0 0.0 0:01.16 ksoftirqd/1
6 root 10 -5 0 0 0 S 0 0.0 0:01.04 events/0
7 root 10 -5 0 0 0 S 0 0.0 0:00.65 events/1
8 root 10 -5 0 0 0 S 0 0.0 0:00.00 khelper
9 root 11 -5 0 0 0 S 0 0.0 0:00.00 kthread
35 root 10 -5 0 0 0 S 0 0.0 0:00.15 kblockd/0
36 root 10 -5 0 0 0 S 0 0.0 0:00.00 kblockd/1
37 root 15 -5 0 0 0 S 0 0.0 0:00.00 kacpid
127 root 10 -5 0 0 0 S 0 0.0 0:13.16 ata/0
128 root 16 -5 0 0 0 S 0 0.0 0:00.00 ata/1
129 root 10 -5 0 0 0 D 0 0.0 0:01.15 ata_aux
130 root 10 -5 0 0 0 S 0 0.0 0:00.00 kseriod
158 root 16 0 0 0 0 S 0 0.0 0:00.00 pdflush
159 root 15 0 0 0 0 D 0 0.0 0:01.00 pdflush
160 root 10 -5 0 0 0 S 0 0.0 0:10.68 kswapd0
161 root 11 -5 0 0 0 S 0 0.0 0:00.00 aio/0
So my server is "unresponsive" for abour 18 hours, burst net didnt answer my tickets and I dont know what to do. Ive been with this setup for almost 5 months with no problems, No changes have been made to hardware or software.
Im using Centos 5.0
View 10 Replies
View Related
Feb 7, 2009
I currently have an Apple computer and am looking for a webhost. looked at hostgator but when i tried to view sample website builder i was unable because i have a mac. Are there any webhosts that fully support mac's?
View 7 Replies
View Related
Apr 18, 2008
I have a few questions about hosts.allow
1) There are 2 IPs in this file. I did not put them there. This is a dedicated machine. The IPs go to a Canadian hosting company. I am not in Canada and those are not my IPs.
2) Does my provider have the right to add IPs to this file without my consent?
3) I have already commented them out, of course, but I am concerned.
View 4 Replies
View Related
Aug 23, 2008
As some of you may know I have about 4 different webhosts.
the problem is thats to many and I want to maybe cut it down to 2 but not sure which 2 and thats my delema or jam.
Downtownhost is one of the 4 hosts and I have been with them for over 2 years now and its great and support it top notch. So would hate to leave them.
Everity is another one and they are great as well and very honest, which still impresses me today and I have not yet been with them a year but it will be this December. They were able to run my biggest site with out any issues and that was nice then again so was downtownhost able to well to a point until the space the site was using got to big for downtownhost which is why I got everity in the first place.
Hostsimplex is a new one I got to see what directadmin is like and wow direct admin is awesome and almost I want to move all my site to this host. They are also very nice/ friendly and support is also honest and gee a few times while opening up the live support for a question or a problem figiruing some thign out in direct admin I have gotten into long friendly convos with them. Kind of feel bad about that though as I would hate to take the support staff away from other customers. I do like also how they have free remote back up, which is nice but I still will make my own back ups locally just in case. Any way this host is still new for me so I am not sure how good or bad they are but so far its good.
The forth one is liquid webs as as of right now my main and largest site it on it. This hosting is not one I own but a friend/client. I am not even paying for it which is nice. How ever I have little to no support as I have to rely on my friend and he is not always on when I have an issue. Do to that this might be the first one I drop.
Although it it rare that I have issues and I do not have to worry about the cpu ussage, bandwitdth, diskspace because he said I could use what ever i want. He also said the server has a 500gb hard drive and not even 10% is being used.
Any way thats the issue I am having so which do you think I should drop or should I just keep them all as I do have an active site on each one.
View 12 Replies
View Related
Mar 15, 2008
if there's a list out there of the "trendy" web hosts; where it's cool to be hosted, etc.
For example:
Joyent
A Small Orange
Maybe these are niche hosts, etc. but it seems people talk about them in the blogosphere.
View 11 Replies
View Related
Jul 10, 2008
I signed up to Uni-Hosts (Universal Hosts) a couple of days ago after seeinf one of they're deals in the Deals Forum and I'm still waiting for activation.
Is there anyone here with Uni-Hosts or had experience with them?
I was initially impressed with the deal but I'm getting unimpressed very quickly with they're setup times.
View 1 Replies
View Related
