Well I have a friend that tells me if I can work and optimize his server , but he dont know ssh port , default is 22 but that port doesnt work .... his server is in other country and the only way to administrate it is from ssh , I have root access to the server but I dont know how can I get the correct port ...
View 10 Replies
About a month ago, I searched desperately for days to host my social networking site and file hosting site. Thankfully I found Wiredtree(WT) to be suitable for my budget. I signed with them with their entry plan of $44.10 and was happy with their service. The customer support was extremely helpful and they did everything to make my life better.
Nevertheless my project didn't turn up as expected and I decided to close the hosting.
Just a day before the end of one month of hosting, I wrote to them asking to close the account and also congratulating their service I also told them I would look forward to host with them in future and would recommend them. I expected a warm termination without any hassle. But i got a mail quoting their TOS (which says I should inform them 7 days in advance) and asking me to pay up another month's hosting fee before I can close the account. Along with it was a note from the staff to use the client portal to contact Billing Department directly to close the account (hmmm would they ask me to contact sales department directly if I tell me I want to add new server?). What hurt me was not the extra $44.10 which I will pay them anyway, but what they could have done was to understand my genuine case(first time customer). Tell me, how many of us read the TOS really. I requested them not to charge me, but got same cold response asking me to adhere to the TOS.
On the other hand my experience with other host (PM me if you want to know who) was one of awe and amazement. I wrote asking them the price I should pay to have more bandwidth. To my surprise I got extra bandwidth absolutely free though it wasn't mentioned such things in their TOS.
Well I learned a lesson today not to forget the importance of TOS and i am sure new webmasters will find this post useful.
This thread is not against the WT service. But a warning to new webmasters who might miss the fine print.
I am using HC7 to manage my hosting plans for my company. The hosting Server have Mail server (MDaemon) and it configured. However, SMTP service in IIS6.0 is not enable. I tried to get password to login HC7. it is tested 2 times :
first time : Boths SMTP service in MDaemon and IIS are enable ....result : all things are ok second times : SMTP service is disable in IIS, SMTP service in MDaemon still enable...result : anymail are sent customers to get password.
I suggested : Enable SMTP service in IIS, but my boss (before he also worked with windows hosting ) said that it not need to enable.
I'm runnung a server with Apache2 (Apache/2.2.16 (Debian 6.0))
I would like Apache2 listen on port 8080 for IPv4 and on port 80 for IPv6.
This is what I have now:
/etc/apache2/ports.conf
Currently I am using Linux + cPAnel and using the port 25 for email sevrer. Currently we facing 1 problem is, some user's ISP is not support port. May I know how can I add additional port into server and allow users to send mail by different port?
View 1 Replies View RelatedI have an office internal website and I opened a port in the gateway of my office (7080) to this website (server )'s 80 port. That makes this website open to public as office has static IP. And then when I view the site from home . it's fine. But when I tried to login, the site is using a pop-up, I guess it's http authentciation, login, I was redirected to a url without my port number any more, that stops my access to the site as obviously I would.
How can I keep my connection/port number ...?
about the NIC and switch,
there are giga port vs mega port,
in your experience,do they really be different?
I recently changed my SSH port, but locked myself out when my APF firewall was installed.
Where would I got to add a custom port inside the APF's config file?
I am using proftpd...How do i instruct that the server don't listen on high ports 49152-65534 but only to 21?
The reason is because my client's firewall setup is very strict and i need to give a good reason to open those high ports. Right now, i can ftp to port 21 only but can't do nothing more than that coz the higher ports are blocked.
i now have root access at a site i manage and the previous admin has set up a different SSH port.
I think this because i get " Connection Refused " and that user has access for SSH.
When restarting my SSH services i recive;
Quote:
sshd has failed, please contact the sysadmin.
And from looking that error up it means the port has been changed.
So i have WHMC access and all other root passwords etc, but how can i find out the port?
Bought New VPS recently , it suppose 10MB unmetered .. when Download Big files thru SSH , the Speed Never Exceed 2MB, always 2mb or less ..
i thought i get 10mb, from wht i understood when say 10mb unmteret ..
how to make sure if i'm on 10 mb unmetered or not .. i thought simple just download some big file from ssh and see wht speed ..
I have cpanel running on a centos box and I want to change the ssh port from (22) the default port to something new i get 13000 login add temps a day. How do i do this i have root access
View 11 Replies View Relatedis it safe to keep the port 111 open or what?
i'm using CentOS 4.x
I am having my ded server disconnected in less than 2 hours if I dont delete a bad website off my dedicated server (I run a free hosting website on it...i know! I know!)
Anyways I need to login to ROOT and manually take this website off the server, which I have NO IDEA how to do anyways, but I need the SSH port to do so and I HAVE NO IDEA what it is!
How do I find this information out?
I'm a bit new to this, and I wanted to host my server on a VPS. I tried connecting, but that just didn't work. Do I need to portforward the VPS? Sorry, Like I said, I'm a bit new.
View 6 Replies View RelatedI know this is a bit of an odd question but I have a VPS which has port 1189 open. Is it normal by default to have this port listening on a OpenVZ VPS under HyperVM? or is this something a little concerning? Never noticed it before, just checking I don't want any illegal applications being hosted on my server by clients.
It's most probably nothing to be concerned about, just wanted to double check.
I would like to know on how to forward specific IP with port to localhost or any IP by using iptables ? For example i would like to forward for port 25 from IP A to IP B, Currently i'm doing a test with my firewall and i'm very blur with iptables thingy.
View 2 Replies View Relatedwhat is port forwarding?
View 2 Replies View RelatedI have a script that needs to make a port 80 request to itself and it seems that there is something blocking that request. where should i look to correct this problem?
View 14 Replies View RelatedOK, This is killing me, can someone tell me how to unblock ports 7000-9000 in ConfigServer (CSF) for my whole server? I need them unblocked for WHMSonic, and all my admins are off for the weekend so I really need some help.
View 7 Replies View RelatedOne of my clients has a couple of servers from me.
In the course of my work, I've setup various people to send mail via one of these servers, using SMTP on port 587.
Can I see on the server who has been using it to send via port 587? I didn't keep a record, the server is closing down and I'd like to let as many people as possible know that they need to change their SMTP settings .. there are only 50 or so I think.
someone attacking my VPS via port 80, which firewall u advice me to use on windows 2003 WEB edition ?
Or anyone have smillar experiance and can tell me what to do? Btw my hosting company is LeaseWeb.
My switch 3COM 4500 (Layer3) ;
I want port 1 of switch work in all VLANS!
I created vlan2, vlan3 and add this trunk/hybrid port in all vlans and ping no work por port1.
I recently leased a server from leaseweb.com
It was suppose to have 1000mbps/sec full-duplex!
Can someone tell me how to check if I have what I paid for?
I tried wget from my friend's server who is with leaseweb aswell. Did a 100MB download test and for
30.36MB/sec === is this 1GBps? Please can someone tell me another way to test?
I've noticed on some rackmount servers and firewall appliances there are ports labelled console, and look like serial ports. Are these related to connecting to KVM? I am looking for a cheap appliance for some rackmount servers I have (1U half depth would be ideal), to remotely recover the server if it goes down. I figured they'd connect through PS2 connectors, but then I thought that if the console port was related, then going through that might have the option for power cycling or something.
View 7 Replies View Relatedim doing this in favor of my friend who is having some problem with his dedicated server,"he does not speak english very well" he has a unmanaged dedicated server he changed something on his ssh port and forgot what port is it, he can still access his WHM right now, meaning he know's the root password "correct" but the problem is he forgot his ssh port
View 14 Replies View RelatedI have been receiving a lot of emails from LFD about this ip (93.190.138.129) port scanning.
I get about 3+ of these emails a day letting me know that ldf has blocked the ip temporary.
I am now wondering should I be worried about this ip port scanning?
The ip is from the netherlands where my server is hosted and was wondering if its a coincidence or not?
i want to changing my ssh port from 22 to other .
so i have edit ssh_config and change 22 to for example 9000 .
and add 9000 in TCP_IN and TCP_OUT on my csf Config and delete 22 from them
and restart ssh .
but my ssh isnt login with 9000 and no effect .
I have an outgoing telnet connection to a server
The server accepts connections on several ports
I used to connect on port 5000, but now forced to use port 5025
How do i open port 5000?
How can i test to see if a port on my box is open or not, can i ping it with the ip and the port?
View 4 Replies View Relatedi have a linux machine with centos5 64 bit. I have a firewall and would like to know how to open and close ports? I have tried several different things and cant seem to open a port?
Is there a command line i can use in ssh to open a port? Or is there something i can addon to cpanel to control ports?
