to install LightHTTPD but I want to know how can I protect folders like using on apache i can put a .htaccess and it prompts me to enter pass etc...
How do I do that in lightHTTPd?
How do I disallow certian file extensions from public eyes like on my current server I disabled viewing of .datab files and when someone types in the location of mydb.datab they get a forbidden message.
how do i do that in lighthttpd?
I have been given a code by the coder to add in the conf file under the location / in conf file but there is no location code under conf file. I am not sure where to add this location / in the conf file ? need help on where to add this code in lighthttpd file
All I wanted to do is just an add an rewrite rule for one of the file and the coder has mentioned to add it below location / in conf file
Today when I visited my plesk-stat folder, I saw that it is publicly available. Everyone can see the stats.
https://example.com/plesk-stat/
Is not this folder supposed to be protected by password as default?
i'm trying to edit my my.cnf file,but unfortunately don't find this file in
/etc/ folder.
It was moved from here, as i find my.cnf.moved with such content
[mysqld]
local-infile=0
and there is backup file for my.cnf.backup in this folder, but when i rename it
to my.cnf some of my scripts don't work well.
So it mean, that real configuration of my.cnf is fine, just need to increase
one value.
Server:
Centos 4.5/cPanel v11/php5 - SSH
Maybe someone can set me straight on this. I have always been under the impression, that under normal circumstances, permissions should usually be as follows:
userdir - 711
public_html - 750
folders - 755
files - 644
I am doing some work on a server and when I create a new folder (using WinSCP) it defaults the folder permissions to 775 and file permissions to 664. Besides causing possible problems with the applications I'm installing, isn't this a bit of a security risk?
Also, if I upload a tar and untar on the server it sets the same 775/664 permissions.
a way to set up a redirect in cPanel so that every file within a particular folder is redirected to a specific file.
For example: I want to redirect every file in domain.com/test to domain.com/redirectedFile.htm
Is this possible in cPanel?
If not, is there another way to do this?
I have a file on my server called admin.php and a folder called "admin" I only want 2 IP addresses to be allowed access to those files.
can this be done in .htaccess? if so can someone give me an example?
I have spent ages trying to work it out myself but I'm a bit of a noob
thanks in advance
what should .htaccess files be chmod'ed to ideally?
I deleted my tmp folder and mounted a secure tmp file via fstab
e.g.
/path/to/tmp /tmp ext2 loop,noexec,nosuid,rw 0 0
the temp files are now written to a secure tmp file, however some processes still need that folder for example cpanel.
"Failed to create directory /tmp/cpanel.TMP.xxxxx"
Should I ignore that and similar error messages or what am I supposed to do?
Recently I moved my WordPress website to another server, After moving my site I see that my all files permission set to 664, for that I getting many error, now I want change all files permission 644, but problem is I have many subdomain with this site, is there any way to make change all files permission to 644 with SSH or any other way?
View 1 Replies View RelatedI have a problem where every folder I ftp onto the server gets given a 700 permission and every file gets a Zero permission. Most of the sites I am adding to this server will be WordPress sites and most of the folders I want to have a permission of 755 and for the files a permission of 644 so my question is how do I change the settings so that any new files ftp'd onto the server get the permission 755 and files get the permission of 644 ?
View 2 Replies View RelatedI got this Problem after install a New Plesk Server.
Current: CentOS 6.5, Plesk 11.5.30, PHP 5.3.3 (Default install), PHP as FastCGI (I Tried also with Plesk 12.x).
What I did: in IP Tables i set al Ports for Plesk; I set in /etc/proftpd.conf the Ports "PassivePorts 65000 65200"
Problem: Each file ore folder created by an php Application i cant see ore override by ftp.
Example: I Upload a new installation of Joomla 2.5 (CMS) by ftp with a User created by plesk. Then I start the Installation by using the Webbrowser. In this process Joomla change some files and create also an configuration.php. All done by php Scripts. Now I check the configuration.php on the FTP -> Cant see it. -> I check by SSH and the file exists. If I Check the Permissions it seams, that all file have same permissions, owner and group.
-> Configuration.php can not see by ftp ore be overwritten
-> htaccess.txt I see by ftp and i can manage
->> Permissions seams to be the same "?"!"
Ok, new to Plesk, trying to move from ispconfig. So I have Plesk 12 running on Centos 6 64bit in a VPS. I figured out how to upgrade PHP and now I have installed my first website. The website is joomla based but I am getting the below error when installing components:
Warning
Copy failed.
JInstaller: :Install: Failed to copy file /var/www/vhosts/virtual-sim-racing.com/httpdocs/home/tmp/install_55081e65af5fe/pkg_kunena.xml to /var/www/vhosts/virtual-sim-racing.com/httpdocs/home/administrator/manifests/packages/pkg_kunena.xml
Package Install: Could not copy setup file.
This suggest to me a permissions issue - but what to do with it. I have checked all of the relevant Joomla folder permissions and they are all showing as writeable, so it looks like something outside of that?
I don't want to have to stick with ispconfig much longer ...
can anyone instruct me how to Re-compile php for lighthttpd, those people who had expierence with Lighthttpd?
View 2 Replies View Relatedhow to restart lighthttpd?
I was asked to restart lighthttpd at my friend host, he has 6 sites running, and of the site is down, host has asked him to restart the server, as he is away, he wanted me to restart, but I have no clue how to restart lighthttpd,
It will be really helpful if u can guide me for : if possible for the domain alone, else for the entire server
current options available :
lxadmin - hypervm
ssh connection
let me know the steps and code if any.
through lxadmin/kloxo how to disable apache and enable lighthttpd ?
if any code or any method plz explain in detail, never done, now need to do it on my friend vps as he is having problem with apache loads
I want to know lighthttpd works on what different kind of control panels
I am aware it works on lxAdmin, I want to maximize the options for more control panels which would be flawless
I don't have location/ in conf file where should this be placed under or above what content should this be added?
View 4 Replies View Relatedim thinking about getting a VPS with Cpanel or Plesk, but i would like to use lighthttpd instead of apache.
View 12 Replies View Relatedits been long time since I have set one and its been really bugging with the feather theme interface, which I haven't used before
now, here is the pt.
I have 3 ips , I want the main ip to be unique
i.e assuming .2, .3 and .4 are the the ips we have ben provided with, where .2 is the main ip of the server (lxadmin)
now, in the dns template, I have 6 options where ip has to be assigned, as -
base, cp, mail, ns, ns1, ns2
I have set the base,cp, mail, ips to .3
I don't have a clue on what to set for the ns, ns1, ns2
I want .3 to be shown as the pinged ip when site is pinged.
We have set .3 and .4 as the nameserver ips in the registrar, so do I need to provide .3 as the ns1 ip and .4 as the ns2 ips or both the ips have to be .3
and what should be the ns ip?
I had a .htaccess working in my previouse hosting. It is not working with the new hosting which has lighthttpd.
Can anyone help me to change my below htaccess modrewrite code to lighthttpd url rewrite? Its urgent please.
RewriteEngine On ...
I am using Apache now on my VPSes but i want to try it again with lighthttpd as it will use less resources, but the only problem is that lighthttpd is taking up lots of memory and i've read about a memory leak.
View 14 Replies View RelatedI am installing phplinkdirectory in lighthttpd, keep having problems with Mod Rewrite, everytime, I enable Mod Rewrite, 404 errors come out. What should I do?
View 7 Replies View Relatedhow to de-activate lighthttpd and activate apache?
my friend is having some problem in his vps so he wants to get back into apache interface...
he is using kloxo/hypervm interface
Installed lighttpd but unable to run it properly.
[root@ssserver1 lighttpd]# /etc/init.d/lighttpd restart
Stopping lighttpd: [FAILED]
Starting lighttpd: [ OK ]
[root@ssserver1 lighttpd]# netstat -anp | grep light
[root@ssserver1 lighttpd]#
Checked logs.
2008-05-21 23:12:43: (mod_fastcgi.c.904) bind failed for: unix:/var/run/lighttpd/php-fastcgi.socket-0 No such file or directory
2008-05-21 23:12:43: (mod_fastcgi.c.1340) [ERROR]: spawning fcgi failed.
2008-05-21 23:12:43: (server.c.908) Configuration of plugins failed. Going down.
How to have multiple domains with 1 site on lighthttpd
Its simple 2 domains and 1 forum. The links should work as 2 individual sites.
[url]
The main site would be site where the site2 will be the additional site shadowing site
I need the code for lighthttpd
For my website I have a server which houses all of my gallery IMAGES of my user profiles. There are over 100,000 images on the server and it's only purpose is to provide those images with http.
However, the http server also has PHP installed, and it's only purpose is for uploading new images. Therefore users eventually get redirected to the images server where they can upload the image.
This all works, but in the future I want to remove the PHP side to the server. I also want to change the whole server program from Apache to Lighthttpd. This is because, lighthttp is a very low overhead web server program, but also provides very little features.
So I was wondering, if I was to do so, and since PHP is not installed, then I would have to make the upload pages on the main http server (which has PHP and Apache). Then I would have to make the main server send the uploaded image to the the lighthttp server via some sort of the scp system call, via PHP. I know that this IS possible, but when it comes down to security holes and so on, would this method really be worth it?
Generally I want to have the lighthttp setup only because it eliminates having to have any dynamic content. Obviously this can also be done with apache (removing dyanmic content), but lighthttp may be more efficient for static content.
I am looking for some good ddos protection providers, via protected dns. I've searched on internet, but most of them are really expensive.
Please tell me some ddos protection providers what could help me.(gige is too expensive btw).
And I found some ddos protection scripts. How can a script protected a server from ddos? A sript like CSF or DDoS deflate?
trouble with users mis-using hot-linking feature, so he wants some restrictions to b set via htaccess
He has given me a code which is used for htaccess in apache, but he wants this to work in lighthttpd, I am not sure if this would work in lighthttpd htaccess,
this was the code given to me to b worked on:
Code:
RewriteEngine on
RewriteCond %{HTTP_REFERER} !^$
#allow hotlinking for thumbnails
RewriteCond %{REQUEST_URI} !_thumb
#allowed website to hotlink (don't forget to add your own site !!)
RewriteCond %{HTTP_REFERER} !^[url]
#display no-hotlink.jpg instead of the requested image
RewriteRule .(jpg|jpeg|gif|png|bmp|ico)$ [url]
can any one help me for getting this code re-written for lighthttpd version htaccess file and where to enter this code -- using hypervm/kloxo on his vps