-Do any control panels work with lighttpd yet?
-What control panel uses the least system resources. I heard Cpanel is a huge hog.
-I also would like to host maybe a gameserver for friends on my dedicated server, what control panel works the nicest with gameservers to not hinder performance on either end?
-I saw a new Control Panel Called Interworx. Anyone heard good or bad about it?
Xen control panel because I just got a server so I can try out using Xen instead of OpenVZ. Most of the control panel's that I've seen only support OpenVZ at this time. Would anyone be able to suggest a good panel that I could try out or look at?
I know HyperVM is one but can it be trusted as of now? I know that they have people working on it and there are no major hacks right now (at least not yet) but would it be suggested to use it?
I am currently using four different web hosts for different projects. All of them offer a web control panel, which is handy. However, I was noticing today that none of them use https to access/use the control panel.
View 8 Replies View RelatedFor managing vps, do you use HyperVM or any other control panel?
View 10 Replies View RelatedThere's a bit of a project which I am going to be launching hopefully within about a month or so. Its going to be fairly server intensive, and as I don't know what the outcome will be, I wish to host it myself on a few spare machines I have for the time-being.
Now, the issue at this stage is installing all the necessary webserver software and controling it from one page, like a control panel.
I don't mind looking into control panels such as Plesk or any others, but would these automatically install all the software that is needed by the CP - such as Apache, MySQL, PHP, Perl etc?
I'd appreciate if anyone could give me some guidance as far as control panels and web server software is concerned.
i upgraded my UBUNTU to 9.10 in which i cant install the FREE Plesk Version.Damn
So im searching for quality free control panels like plesk.
I found webmin but its only for system not for a website.
does anyone have any suggestions on selecting a control panel? ive seen some products around $300 that appear to be just enough for what i need.
how long is the typical setup time for a control panel?
Windows VPS control panels like HyperVM?
Are there any available?
when I was in vps except cpanel and whm I had another control panel for vps , Don't remember what was that I could turn my server off and on for dedicated server except for cpanel and whm what else do I need?
View 11 Replies View RelatedI just want to provide what it takes to change hosting company or moving from one to another.
Here is 10 steps how you can do it.
Please correct me if I forgot something or I am totally wrong (wing-wong)
1.Identify a web hosting company that provides the features and services most suitable for you.
2.Order an appropriate hosting package from the supplier.
3.Use the Control Panel facilities to manage your email boxes and such like.
4.Begin the transfer of your domain or change the domain records and change email settings if required (your new web hosting supplier
should provide guidance and support to make this as simple as possible).
5.Copy all your files from your previous web hosting service.
6.Upload the files to your new hosted web space.
7.Transfer any databases required for your website.
8.Check that all files have been copied and uploaded successfully.
9.Test functionality and content related to any databases.
10.If you have not done so already, cancel your previous hosting service.
By the way I think that the most biggest problem is to know how to get moving from one to another hosting that’s why people always thinks that
they will stick to one hosting company and forget all major problems with that company (downtimes, long servers maintenance and etc.)…
I am trying to analyze cPanel, DirectAdmin and Plesk and will provide all (as much as I can) information regarding how to transfer your website.
I just want to provide what it takes to change hosting company or moving from one to another.
Here is 10 steps how you can do it.
Please correct me if I forgot something or I am totally wrong (wing-wong)
1.Identify a web hosting company that provides the features and services most suitable for you.
2.Order an appropriate hosting package from the supplier.
3.Use the Control Panel facilities to manage your email boxes and such like.
4.Begin the transfer of your domain or change the domain records and change email settings if required (your new web hosting supplier should
provide guidance and support to make this as simple as possible).
5.Copy all your files from your previous web hosting service.
6.Upload the files to your new hosted web space.
7.Transfer any databases required for your website.
8.Check that all files have been copied and uploaded successfully.
9.Test functionality and content related to any databases.
10.If you have not done so already, cancel your previous hosting service.
By the way I think that the most biggest problem is to know how to get moving from one to another hosting that’s why people always thinks that
they will stick to one hosting company and forget all major problems with that company (downtimes, long servers maintenance and etc.)…
I am trying to analyze cPanel, DirectAdmin and Plesk and will provide all (as much as I can) information regarding how to transfer your website.
I would be glad if you would share some information with me on this forum. Really would be awesome…
Anyway I think it would be great idea to have all information together collected.
please provide me some free control panel like webmin!
View 14 Replies View RelatedI've started looking into KVM to possibly to run alongside or even to end up replacing our current Xen infrastructure. The fact that it's built into the mainstream linux kernel is very appealing.
Are there any Control panels/basic frontends for this at the moment to allow users to Reboot/Reimage their VM's? At the moment its looking as though we would need something inhouse or custom developed
Lighttpd works well with static file.
But for php, it's totally not good for me
I just install lighttpd and php.
By [url]
Now It takes about 10 seconds for the
server to response.
Here is a part of config file
############ Options you really have to take care of
####################
server.max-keep-alive-requests = 4
server.max-keep-alive-idle = 4
server.max-read-idle = 60
server.max-write-idle = 1024
server.max-fds = 8192
php.ini using the default one
Here is the link to it
[url]
And only about 200 connections. the load average is only 0.02.
When I check the error log
2007-11-08 12:38:46: (server.c.1253) NOTE: a request for
/view_video.php?viewkey=f8e13f14b405e038deb6&page=&viewtype=&category=
timed out after writing 13068 bytes. We waited 1024 seconds. If this a
problem increase server.max-write-idle
2007-11-08 12:40:07: (server.c.1253) NOTE: a request for
/view_video.php?viewkey=b9530df88f7f002e78ea timed out after writing
13068 bytes. We waited 1024 seconds. If this a problem increase
server.max-write-idle
I have upgrade from 11.0 to 11.5 three days ago and yesterday then from 11.5 to 12 due to the need of the outgoing mail control limit feature... but that ist not working.
I have enabled the feature and set a limit for one emailadress to two mails per hour. i have sent definitely more then 3 test mails via this email address but nothing happens.. and when i look into the statistics screen - this email address has sent 0 mails in the last 12 hours - which is definitely wrong. Seems the piece in the middle which counts mails etc is not working... how does the outgoing control limit works? is there some special configuration needed after an upgrade etc?
Good work on Version 12!
Plesk 12.0.18 on CentOS 6.5 using Postfix...i have configured outgoing mail control to have a limit on a domain. I have removed all entries from the server wide white list.This setting - Allow scripts and users to use Sendmail is unchecked.However I can send any number of messages using PHP's mail() command from a PHP script on the domain.I see this in the maillog:Error during 'limit-out' handler...But the email is sent and no limit is applied.
View 7 Replies View RelatedWhere does everyone get rack blanks/filler panels from? I'm getting a new rack and will need a bunch of filler panels, but don't want to pay way too much for them. I'm interested in 1U, 2U, and 4U fillers for now.
View 8 Replies View RelatedSSI isn't working with lighttpd. I have enabled the module and set the extension, but it still doesn't work.
View 1 Replies View RelatedSo basicly I got a vps and am using lxadmin *renamed* and with ssh and lxadmin the lighthttpd wont start and it is installed under the centos hostinabox distro.
View 3 Replies View Relatedmy php.ini had some changes (/etc/php.ini). Today i have switch from apache to lighttpd, do i need to edit another php.ini file ? Apache and lighttpd use the same php.ini ( /etc/php.ini)?
View 5 Replies View Relatedhow I can use mod-rewrite with lighttpd.
Actually I am going to use phpprobid system and it has in built function for mod rewrite but I think it is for apache as if i turn it on I cant access pages
I am struggling to get this .htaccess file to work with lighttpd, i am not a coder so its very hard for me to fix it, hopefully if someone knows how can tell me how to write rewrite code that will get it working.
{quote}
1. Comment the 2 lines below if the server returns 500 errors!
Options -Indexes
Options +FollowSymLinks
#Uncomment following lines if you want to use image caching!
#<IfModule mod_expires.c>
1. ExpiresActive On
2. ExpiresDefault A1209600
3. ExpiresByType text/html A1
#</IfModule>
1. Uncomment following lines if Apache doesnt support MultiViews!
<IfModule mod_rewrite.c>
RewriteEngine On
1. Uncomment the 2 lines below if you are using www.domain.com # as the baseurl for the site and users access your site # via domain.com (THIS IS REQUIRED FOR JQUERY TO WORK)
#RewriteCond %{HTTP_HOST} ^domain.com [NC]
#RewriteRule ^(.*)$ http://www.domain.com/$1 [L,R=301]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule .* loader.php [L,QSA]
</IfModule>
1. Edit below lines and set to
2. ErrorDocument CODE /RELATIVE/error.php
3. If the script is installed in the default document
4. root then relative is null.
#ErrorDocument 401 /error.php
#ErrorDocument 403 /error.php
#ErrorDocument 404 /error.php {/quote}
looks like its calling the rule from loader.php file, now how can i convert this to lighttpd language,
How I can convert the following into lighttpd rewrite?
RewriteCond %{REQUEST_FILENAME}
Until recently, it seemed like everything I read about a server indicated that Apache was king. I have never read anything that has given me any reason not to use Apache.
However, about a year ago when I discovered Django, I discovered Lighttpd. From everything I've been able to read, Lighttpd seems to be a better web server, but still don't know very much at all about Lighttpd.
I'm fairly comfortable with Apache, although I've never cared much for it. I have a feeling that I'll like Lighttpd quite a bit more from the very little that I do know about it. I'm wondering if I should even consider switching.
For one, it seems that everyone knows how to work with Apache and Lighttpd seems to be far less common. Apache also seems to be much more established which leads me to believe that it's a safer choice. Nonetheless, I still really want to give Lighttpd a shot. And, judging from what I've seen about Django and Lighttpd, Lighttpd seems to be a better choice when working with Django.
What do you think? Should I stick with Apache since I already know how to use it? Is Lighttpd worth the time to learn or is Apache just too good?
I wanted to know what do you prefer as server apache or lighttpd , though I am running lighttpd and have no issue except that there is too much work for mod rewrite and it effects search engine, so I was thinking to use apache instaed of it will it be possible to install apache over lighttpd or will I have to go for fresh install.
View 14 Replies View RelatedI'm about to set my own permalink rules in Wordpress.
My VPS is running LxAdmin on CentOS and I have lighttpd installed. I've read I need to edit lighttpd.conf but I don't know which application I should use. The file is located in /etc/lighttpd/ but have no idea how to gain access.
I keep getting a segmentation fault after a few hours when I leave lighttpd on. It doesn't seem like much resources are being used and its serving about 60mbit/s. There's nothing in the error or log file.
I'm using CentOS 2.6.18-92.1.13.el5
and
lighttpd-1.5.0-r1992
Here's the config:
server.modules = (
"mod_access",
"mod_trigger_b4_dl",
"mod_status",
"mod_proxy_core",
"mod_proxy_backend_fastcgi",
"mod_uploadprogress"
)
upload-progress.progress-url = "/progress"
server.network-backend = "gthread-aio"
server.max-fds = 15000
server.max-connections = 10000
server.event-handler = "linux-sysepoll"
I've actually been having this issue since I've moved to lighttpd 1.5, 1.4 was working fine but I need the features in 1.5. I've tried changing the event handler and network backend to no avail.
How can I at least find out what's causing the error?
I just recompiled PHP 5 with MySqli in cPanel and Mysqli is working fine under Apache, but it doesn't work under lighttpd. I can see the MySqli module in phpinfo when I run it under Apache, but there's no MySqli module when I run it under lighttpd. So how can I fix it to use MySqli with lighttpd?
View 1 Replies View RelatedI'm going to see what Lighttpd on cPanel does today. I've asked my VPS provider (Zone.net) to perform this and provided them several links too. Their manager said they should be able to and so I submitted a ticket .
View 3 Replies View RelatedI have a fresh out of the box vps install of centos-5-i386-hostinabox571.
I found the web root directory at: /home/lxadmin/httpd/default
Where is the cgi folder supposed to be?
Having constant and random downtime with Lighttpd being that for no reason connections get refused and my server load is low, that I think maybe get Litespeed.
I believe my server is an Intel Core2Quad Q6600
I think its only got 1 CPU in it.
What license do I need?