I have instal image sharing web and run well. But when i install my drupal site, my DS give me some error with that CMS.
1. First time, when i'v tried to open it, but browser always ask me to download it.
2. And then i've tried to change .htaccess and remove about addhandler, i can load my web. But not well. The page displayed just cache page. if i tried other page, just blank displayed no html or php tag displayed at source.
config my server? I think there is something wrong with my apache and/or PHP configuration.
Can anyone with previous exp. in Video Hosting/Streaming provide me some info on THE CONFIG AND BANDWIDTH REQUIREMENTS FOR ffmpeg hosting for youtube like site?
Here are the basic things-to-know & Server(s) Funtions:
1. Do Video Conversions from AVI, MKV, etc to FLV/MP4
2. Stream out these videos for viewers.
3. Expected Traffic: Quite High (1 Million Visitors/mo)
So can anyone suggest me the most suitable Server Config, Bandwidth (I'd prefer dedicated-unmetered b.w) and Host for this?
Also can anyone provide me info on the amount of video conversions and traffic a single server (with your recommended config) can handle?
I am trying to do something that I believe is fairly non-standard. What I am looking to do is create a system where I can rapidly deploy web sites without having to restart named and Apache. For example, if a customer completes a process, I want to be able to turn that site on immediately using a temporary domain (somecompany.example.com or othercompany.example.com).
With some programming language (hopefully PHP) I would like to get the customer up and running with their site immediately without having to restart the server. While doing some research I found I could use MyDNS which uses MySQL to manage DNS data instead of configuration files. MyDNS can be updated on the fly.
For Apache I have seen wildcard configurations, but everyone seems to be suggesting the use of mod rewrite. I would prefer that the domain maps directly to a specific folder:
Of the many sites I have, I have one hosted at Bluehost. In the beginning I was very sattisfied and happy. Lately due to workload and stuff, I changed the sites scripts into Drupal.
This seems in retrospect a bad choice because I get CPU exceeds suddenly. Now because I was new to Drupal I thought it was mistake. But with caching enabled agressivly, a minimum of mods enabled and FastCGI on there are still reports of CPU exceeds. This is something which ticks me of. Google Analytics says (I have hosting stats disabled) I get about 300 unique visitors per day.
So the real question is, whats suxors the most. Drupal or Bluehost? Bluehost says Drupal is a falty script made up of bad coding...
I find 300 visitors per day a little low to move to a VPS host. So my question is, is there another host where I can host my site(s) that has equal settings as Bluehost?
I've made a Social Networking site based on Drupal and I'm now looking for a place to host it. My budget is of 100$ and i'm thinking of buying a premium hosting plan or vps or maybe even a dedicated (if the budget allows) for 1 month, in order to see if the site will have any success. The hosting company must have an option of upgrading the hosting plan so the site's growth will not be limited.
An other alternative would be bluehost but from what I've read they are a total rip-off.
My special requirements are: php5, mod_rewrite and imagemagick installed, SPF domain records or any other method to avoid the email going into the spam folder. mhash and mcrypt are a bonus but not a must.
Anyone can suggest me a truly professional hosting solution for my needs? I don't want the months spent into developing the site gone to waste because of a bad hosting company that suddenly decides they want to suspend my account.
I'm adding a drupal site of my own to my other sites. Any suggestions for good drupal hosting?
I don't envision my site as heavy traffic (mostly for my classes and students) but I know drupal has some heavy demands for sql queries and I would like to make sure the site is pretty fast. I'm building a test site on my ASO account, and response time seems pretty slow.
I'm developing two Drupal websites and now looking for a host. I have never used Drupal before, and all my hosting experiences are with shared hosting. Since I have read lately a lot about problems with performance of Drupal sites on various shared hosts, I decided to look for a VPS. Managed, since I don't have skills to manage it by myself. From what I read I have concluded that for one low-mid traffic Drupal site with few modules active, I'll need 200-250MB RAM. How much will I need for two websites on same VPS? Double? Should I use one Drupal installation for both sites? Does that mean I don't need double amount of RAM?
I have Drupal setup for one domain on my VPS, and it is the only domain I have.
However, I don't use it that much, and I want to purchase another domain for just a small personal site.
I want to run this on WordPress because I am happier with the simplicity that WordPress offers.
However, I want to do this on the same VPS.
Installing WordPress is no issue, but beyond that, I am screwed!
I have no idea what to do as far as multiple sites go, and it took me forever to get the settings right on my Drupal site, but I have read that it is possible to setup separate sites on the same VPS. But reading about it, and finding information about how to do it has not worked out; I'm not exactly sure what to search for on Google, and most guides give directions on using control panels I don't have access to.
I want the drupal site to still be blah.com and then the WordPress.com site to be whatever.com, and I want them to run on the same VPS. I need them to be separate. One person asked the same question on this forum, and I think he got an answer that was how to point a different domain to the same VPS, but again, these will act as completely SEPARATE sites.
Any help, guides, resources that you fine members of WHT could provide would be greatly appreciated. I can get dirty in the command line (although I still am new to all this networking stuff), but if I had someone point me in the right direction, I should be able to get it done.
I know how to point the domain to the VPS' DNS, but beyond that, I am completely lost, and I could use some help.
I own a portal which is heavy on photo, video and audio. My developers have just switched the language from asp.net to drupal.
Can someone help me the ideal server strenghth for such a site. we presently have approx 20000 Images and 3500 Video and 3000 Audio. We have 12000+ members as of now without a single rupww spent on promotions.
We would be now doing a SEO / SEM / SMO and mailers internationally. We expect the numbers to grow atleast 4 folds with a few months
I have a Drupal based website which allows comments on posts after validating through CAPTCHA. Someone has been using a robot to bypass Image CAPTCHA and spam my site by posting hundreds of comments each day.
I use Google Analytics and Statcounter counters on my site. But I haven't been able to find spammer's IP address from visitor logs as the spammer comes directly to my site without any referral. Is there a way to find spammer's IP address and block it in the .HTACCESS file?
I don't think I can stop the spammer just by applying CAPTCHA on comments.
i've a problem with my SMTP settings.The strange thing is that my drupal site, which is located on the server can send mails. But when i try to send from Gmail it does not work.
SMTP-Settings on Gmail Server: IP-Adress/ or Domainname Port: 25 User: E-Mail adress and password
I've also tryed several combinations, it still does nothing.Gmail is showing that it has send the Mail but after a few hours it arrives an email that says:
Action: failed Status: 4.3.0 Diagnostic-Code: X-Postfix; local data error while talking to smtp.mailchannels.net[54.214. 243.124]
My server is a debian 7 64 bits with plesk 12 last update.
A customer installed drupal 7.4 from plesk panel successful. However from Drupal/Configuration admin panel can not enable "Clean url". Clean test url failed too:
"The clean URL test failed"
.htaccess was ok .
I tried set domain vhost.con with (https://www.drupal.org/getting-started/clean-urls#enabling-7):
I built a web hosting server, the following is its state
Cent os 5 AMP server loaded updated (installed it as a complete suite during installation so it was all set to go with php mysql modules loaded) webmin usermin virtualmin
created 2 named based hosts.
now when i load up wordpress in a site and try to run install.php
the following pops up
"Sorry, I can't write to the directory. You'll have to either change the permissions on your WordPress directory or create your wp-config.php manually."
I had this issue before and research said to redo the entire server (tried everything and was fed up had fedora then"
you can have a look at www.itgrunts.com just click create config file and the errror pops up.
The php and mysql db work great on simple scripts but i dont know why this happens.
i worked with assigning the users and apache user to the directory and everything, no joy.
Attached is a (badly) drawn diagram of two sites, connected by a vpn.
The site to the left, is network 10.0.0.0/24 which runs a linux server as the router for the network.
The site to the right, is network 10.1.0.0/24 which runs a windows 2003 server as the router for the network.
Now, my problem is, the clients behind the windows 2003 server can ping any machine on the first network because i setup a static route to route all traffic to 10.0.0.0/24 over the vpn interface.
now, my problem is, only the linux server can ping any machine on the windows 2003 network, any client behind the linux server cant seem to route over the interface.
I have the following route on the linux server: .....
Starting point: a working site using a shared IPv4, dedicated IPv6, and SSL. HTTP and HTTPS work, the latter only using SNI of course.
The good news: If I simply allocate an IP resource of 1 to a subscription it is pulled from the pool, assigned to the service node, assigned to the web site, DNS is updated, and the site is automatically changed to using a Dedicated IPv4 and Dedicated IPv6.
The bad news: visitors land on the default web site of the service node, with the default SSL certificate.
Other info: I can't ping the new IP, even though it shows in "ip a l" and /etc/sysconfig/network-scripts/ifcfg-eth0:0. [edited]
After the IP assignment, it is still installed, and /etc/httpd/conf/plesk.conf.d/ip_default/domainname.conf shows the new certificate is being used.
However, a second set of VirtualHost entries is created in server.conf for this IP for ports 80 and 443, with NameVirtualHost enabled on the new IP. The port 443 entry uses the default certificate. Apache's setup this default VirtualHost entry will override the web site configuration because Apache is listening on port 443 with the wrong cert.
If I go to "Change webspace settings" and toggle to Shared IPv4, Dedicated IPv6 the site works again via HTTPS, and Dedicated IPv4 and Dedicated IPv6 breaks it again. Setting the SSL cert to None and back again does not work.
Setting the SSL cert to None, changing to a dedicated IP, and enabling SSL results in the server being inexplicably inaccessible...browsers no longer connect to either the default site or the correct site, and I don't see any entries in the vhosts's logs.
Code: running a ipb forum site 2.3.4 current stats : Our members have made a total of 245,827 posts We have 14,673 registered members Total number of topics is 75099 with atleast 150 members online + 200guests.
what would be the perfect my.cnf config for this kinda of a server? Im running litespeed.
I have tried to manually setup awstats on a website in Windows 2008 with IIS 7. The problem here is that I have to create two conf files for each website, one named awstats.sitename.conf and the other awstats.www.sitename.conf. If I don't do so, then awstats does not work on either www.sitename.com or sitename.com. I cannot update the stats or view it from the browser. I have a few Hosting controller servers in which awstats is used and I compared the conf file with them and there is no difference. I wonder what could be the issue.
i have a dedicated server without any daily, weekly, monthly backup. please help me (Step by Step)to setup configuration my server to take backup every day within (some account) at (3 AM).
i mean setting for every day about some account (A,B,C...Z) at the 3 AM
Switching from Windows DNS to bind DNS. Slightly different as I have to learn the commands instead of using the GUI. Can you tell me if the below config is correct to run mydomain.net so people can access it from the web? It will also be acting as its own name servers. This is purely for external DNS. The private IPs will be changed to routable ones once its in the DC.
Have I missed anything or is that good enough for deployment to the live environment?
I have this in /etc/bind/zones/mydomain.net.db
; mydomain.net $TTL 604800 @ IN SOA ns0.mydomain.net. admin.mydomain.net. ( 2008012001 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800); Negative Cache TTL
; nameservers mydomain.net IN NS ns0.mydomain.net mydomain.net IN NS ns1.mydomain.net ns0 IN A 192.168.1.15 ns1 IN A 192.168.1.16
;mail mail IN MX 10 mail mail IN A 192.168.1.17
; web IN A 192.168.1.17 www IN A 192.168.1.17
And in /etc/bind I have this in my named.conf.local file
# This is the zone definition for // mydomain.net // zone "mydomain.net" { type master; file "/etc/bind/zones/mydomain.net.db"; };
I have had many dedicated servers in the past but other people managed to configure them up.
I basicly want to host somedomain.com and somedomain2.com on a windows server that is located on XX.XXX.XXX.XX
The server has apache and php installed, which is just what I need. I am having an hard time configuring the domains I want to use on the server in order to make em "work" on the server.
