DNS Server (BIND) Restart After Short Time
Jul 21, 2008i have strange problem in my server
in some times all sites stopped and didn't work
when i do restart to DNS Server (BIND)
after done it works good
i have strange problem in my server
in some times all sites stopped and didn't work
when i do restart to DNS Server (BIND)
after done it works good
I run a website that uses a GoDaddy Virtual Private Server & Plesk. The website sends emails to alert users of various events. For the most part, this works but I occasionally capture the following error message:
Error in processing. The server response was: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later.
Can the number of messages sent over X number of minutes be set via Plesk? If so, how?
I get the following message via SSH when i try named restart
named: symbol lookup error: named: undefined symbol: dns_resolver_setudpsize
All my sites are currently down but the server is up and bind wont restart either in WHM or SSH
i am using WHM 10.6.0 cPanel 10.8.0-R8
CentOS 4.3 i686 - WHM X v3.1.0
Linux ***.server.com 2.6.9-11.EL #1 Wed Jun 8 16:59:52 CDT 2005 i686 i686 i386 GNU/Linux
I spoke to live support at nexpoint but they told me to email their dedicated server support but I havent had a reply in the last few hours.
This is a rare issue i have on a RHEL 5.2 + cPanel server.
Server time is:
Tue Nov 11 17:02:51 CST 2008
Squirrelmail time show:
Code:
Last Refresh:
Tue, 5:02 pm
So, that is correct too..
But email arrives with -4 hours time, example:
webmaster@xxx.com 1:03 pm testing email
I already rebooted httpd, exim, and imap server, and the server itself too.. and problem stills.
I can't get access to a certain site. I always get the page with:
network time out - server at *** takes to long to respons. More people have noticed this and apparently it only happens to people with certain specific providers. And not all the time. Some times they DO get access eventy to they belong to the same ISP. So I guess an ISP isn't blocking access to it otherwise it would be permenantly/The site administrator insists that certain ISP's are blocking his site. He's hosting it on his own server. The domain belongs is registered at namecheap.com.
If an ISP is blocking this site (if that's possible?), that would lead to that 'network timeout' page wouldn't it?
What is the most likely reason for getting a timeout page anyway?
The server is going down from time to time, every 12 days or so the site hosted there is no longer accesible, everything starts with the site slowing don and down and then is not longer reachable, what we do is to request a power cycle, and with this we start all over again till next power cycle, so on so on, of course, here are my server details and more info on this:
- MySQL - 5.1.41-3ubuntu12.10
- Apache - 2.2.14-5ubuntu8.4
- PHP - 5.3.2-1ubuntu4.9
- operating system: Ubuntu Server 10.04 LTS
After some time emailing the support guys to barely check about what's going on, we received an email with a few things:
1.- found a few errors that likely would cause issues with Apache. The first error is:
[Mon Feb 04 05:03:10 2013] [error] mod_fcgid: fcgid process manager died, restarting the server and the next error is:
[Mon Feb 04 14:32:34 2013] [error] server reached MaxClients setting, consider raising the MaxClients setting ...
Both these errors seem to indicate that you have a process that is running out of control on your server. We were unable to determine what script on your site is running caused your connections to be maxed out however it does appear that before these errors were generated there was a WordPress plugin referenced in your access logs...
2.- Additionally during our review we did find that your error log for mercadodedinerousa.com is 45 GB's which is excessively large and can cause problems when Apache is trying to write a such a large file.
3.- The majority of the errors being logged are:
[Wed Feb 06 12:12:31 2013] [error] [client 200.76.90.5] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/vhosts/mercadodedinerousa.com/httpdocs/index.pl, referer: [URL]
I registered my ns1/ns2 at godaddy already, I THINK I have configured the ns1/ns2 with their ips in the server, however, I think the ips for ns1/ns2 are not correctly configured in my server, as otherwise, I would be able to browse the ips in the browser and they would go to my server apache page or the like, the main ip obviously work fine and go to apache.
what should I do for the ns1 and ns2 ip addresses to go into my server, I think this is the problem why my dns are not working
I think the ip addresses are not the problem as I checked them at dnsstuff.com and when I check my ns1/ns2 it displays the ip and their info, which is my provider info, seem's they are very valid.
I have a short list of hosts I'm considering for either my main or backup host. I am currently with A Small Orange in Atlanta who seems to be fairly stable.
Here's the list:
iHubNet.com
MidPulse.com
SharkSpace.com
AspirationHosting.com
I like that iHubNet has their own servers. The comments that folks like Matt A make on this board to be helpful have caught my attention.
My web site has a domain and two parked domains. About 50 subdomanins and is typically 300 to 450MB in size. It uses about that much in bandwidth a month, mostly from clients downloading audio mp3's of voiceover work. The site staying online is important.
I just don't seem to read much on this board about some of these hosts and was wondering if anyone had any experience with them?
I have been with epicvps for past 3 months we are under un-managed plan, but the staff have been pretty supportive than we had actually anticipated its almost like being under a semi-managed service
There hasn't been long down time on our vps so far and the service has pretty good for the cheapest prices they offer around
Usually most of their live support staff have good knowledge about sales and support which is an additional advantage for any one who would wish to join their service
not to mention their speeds its been great
Though I wouldn't like to interpret my domain over here, I am more than pleased to announce I am very happy to announce their excellent service
We had earlier worked with 2 other non-managed vps services, which were no more than ordinary but epic has been fantastic
We are looking forward for a longer healthier relationship with epicvps
My suggestion on epic :Go for it,one of the best I have seen around
I had searched for a long time for reliable and cheaper vps and I am glad I am at the right place for it
Good work epic team hope you could maintain your standard may be increase your standard even more to reach the peak
I'm on my first VPS with Virtuozzo / WHM and I'm wondering about what some general guidelines regarding best practices are in regards to restarting services and or the server. Specifically, I'm wondering what a good time frame it to restart the server and sevices.
I've been told VZ doesn't need to be restarted, but I figured that by restarting VZ, I restart everything at once... is this bad? How often should I do this or not do this?
Alternatively, if I just restart specific services, what is your experience on a good timeline and what services are important to restart?
I've read that mysql doesn't need to be restarted, but am wondering EXIM, http server, dns server, pop3 server, imap server, etc.... specifically what good schedule would be regarding restarting.
I'm simply trying to avoid issues that may occur due to not restarting and trying to be proactive as my clients are extremely important to me... ...
I’m have always used a Windows VPS in the US so I can test my websites from the US and other websites. Since I’m only using this VPS for Internet access, I have a goal to pay as little as possible for the VPS.
I did see another thread here at WHT about [url] and they had a VERY good price on a VPS with 512 MB of RAM, 15 GB of disk, 1000 GB of BW and Windows 2003 server with Plesk 30 domain.
The setup was average, about 5 hours from payment. But my VPS was placed on a VPS node with 60-90% average load, and the VPS was VERY slow.
I opened a ticket, and they moved my VPS to another VPS node with lower CPU load (around 30%), and the VPS speed was OK.
But I did have some problems with plesk, and the only way logging in to Plesk was to poen Plesk control panel direct on the VPS.
After some days I did not have access to Remote Desktop anymore. I did get the message that I had more RDC connections that was allowed.
I opened a ticket and they did reply and work on this problem over several days: .....
We have a rack with a bunch of Dell servers in them. The distance between the front vertical mounting brackets and the rear vertical mounting brackets is just over 28 inches (715 mm). We've always used Dell static rails they and they have always fitted perfectly.
We have recently received some new Poweredge 2970s with Rapid / Versa rails, and it seems that the front and rear mounting brackets are only 24 inches (609 mm) apart.
Am I missing something? I can't find any way of adjusting the length of the Rapid / Versa rails.
It looks like we are going to have to pull all the gear out of the rack, move the rear mounting brackets forward, and put everything back in. This is a real nuisance (and I would do pretty much anything to avoid it).
Let me first start by saying that I have read a lot of reviews on WHT about various VPS providers. I wasn't sure which provider I liked the best and a lot of reviews came to different conclusions. My decision came down to Slicehost. I really liked that Slicehost is a VPS solution made for developers and that Slicehost has solid community support. But the wait is what killed Slicehost chances of snagging me as customer.
I started digging more on WHT and finally came across a promo that BigVPS offered to WHT members. I read more about BigVPS on WHT (their website leaves little to be desired).
I noticed that one of their main employees, Ray, writes with professionalism and was quick to address each WHT concerns and questions regarding BigVPS.
I finally took the plunge and decided to sign up. I signed up for their 512 MB VPS plan with 500 GB of bandwidth. I have been a customer for a little over a month now and I have been very pleased. Just recently, I had an issue with the Xen Debian kernel and IPTables support and Ray was quick to point me in the right direction on how to solve the problem I was having. Ray has always written with clarity and professionalism. I really respect that.
So far I am a happy BigVPS (Color4Jax) customer and I wanted to share my experience with all!
I don't know if this is possible after searching on the internet for solutions. Here is the problem. I recently logged off my colocated server 2 days ago, and have been trying to log into it again like I always do using remote desktop. Each time I try it gives me this following error: "This computer can't connect to the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator."
I've had this server colocated for about 5 months now and I've never had any issues connecting remotely to it. Seems like Remote Desktop got broken somehow, or it's being blocked? I am an admin with logins/passwords etc. The OS is Windows Server 2003 R2, I'm not connected to a remote reboot console. I don't want to have to call the data center for remote hands on support for a restart if that's not going to fix the issue, from what I've heard they charge quite a bit.
Some of my Linux(WHM/Cpanel) hosted domains have a weird problem. They randomly become unavailable to me for periods of half hour to 2 hours. During this time I get a server not found error and I cannot access the domains through FTP either. However if I use a proxy or try to reach the domain through another server using RDC I am able to reach it.
View 4 Replies View RelatedI have the problem that the ip blocked "failban" too short (set findtime=1800).
The ip should be blocked for 30 minutes (the second time).
2015-03-23 22:24:59,779 fail2ban.filter [2807]: INFO Set maxRetry = 5
2015-03-23 22:24:59,780 fail2ban.filter [2807]: INFO Set findtime = 1800
2015-03-23 22:24:59,781 fail2ban.actions[2807]: INFO Set banTime = 600
2015-03-27 04:50:56,209 fail2ban.actions[2807]: WARNING [ssh] Ban 195.xxx.xxx.xxx
2015-03-27 05:00:56,913 fail2ban.actions[2807]: WARNING [ssh] Unban 195.xxx.xxx.xxx
2015-03-27 05:09:05,483 fail2ban.actions[2807]: WARNING [ssh] Ban 195.xxx.xxx.xxx
2015-03-27 05:19:06,153 fail2ban.actions[2807]: WARNING [ssh] Unban 195.xxx.xxx.xxx
2015-03-27 05:35:39,317 fail2ban.actions[2807]: WARNING [ssh] Ban 195.xxx.xxx.xxx
2015-03-27 05:45:40,012 fail2ban.actions[2807]: WARNING [ssh] Unban 195.xxx.xxx.xxx
I'm not able to login in webmails with shot names, in Horde, nor in RoundCube.
Ex: webmail.domain.tld
username: user1
I must use the full email address as username
Ex: webmail.domain.tld
username: user1@domain.tld
It seens it not find the server.
In Plesk Panel it works fine.
I am not being able to restart the server, or MySQL or httpd via SSH.
PHP Code:
root@server [~]# /etc/init.d/httpd fullstatusLooking up localhostMaking HTTP connection to localhostAlert!: Unable to connect to remote host.lynx: Can't access startfile http://localhost/server-statusroot@server [~]#
PHP Code:
root@server [~]# /etc/init.d/mysql reload/etc/init.d/mysql: line 244: kill: (3375) - No such processtouch: cannot touch `/var/lib/mysql/server.lubnan.us.pid': Read-only file system
i've added a few bits to my hosts file, via ssh, and every time i restart the server, it resets the host file,
View 5 Replies View RelatedI try to upload a big file between 300 and 500 MB by FTP to my dedicated server but connection is broken and when I try to do the resume it's not allowed how can I enable upload big files and resume files in ProFTPD 1.3.0a or am I missing something inthe conf file ?.
Here is the log: ..........
My host is experiencing "issues" with my WordPress. It keeps going above their upper limit of open MySQL connections. So, while I am diagnosing it, I need to restart the server every few hours to avoid it going down.
How do I write a cron to restart Apache every 3 hours?
way to restart httpd when my CPU or http connection is reaching a limit? I would rather have it restarted then having it down.
View 14 Replies View RelatedAnyone know a good script that I can run with cron or something? Mysql seems to be the #1 problem with a lot of my web sites, a restart usually fixes it right away for me, but I can't keep restarting my servers everyday manually.
View 1 Replies View RelatedWhen I restart my server all my domains opens at apache test page. Suspending and reactivating any domain fixes all domains.
View 4 Replies View RelatedI installed Plesk 12 on server, and deployed several websites.
If I tried to open ASP.NET Settings on websites & domains of any domain, I've got error:
Internal error: aspnetcfg failed: Version string portion was too short or too long. (Error code 1)
Message aspnetcfg failed: Version string portion was too short or too long. (Error code 1)
File Agent.php
Line 243
Type PleskUtilException
How can I fix this?
An automatic backup in plesk has filled up the disk space in my VPS. It seemed to crash first of all - couldn't access my website, then i tried to restart it. It wont restart and comes up with the error below.
As i can't get into plesk i don't know how to delete these old backup files, seem to be in a catch 22. Help
Jul 17, 2008 01:05:33 PM Start Process Completed
Jul 17, 2008 01:05:33 PM Click here to open/close operation details.Start VPS #48606643 Failed
Jul 17, 2008 01:05:33 PM Operation start with the VPS(s) VEID48606643 is started.
Jul 17, 2008 01:05:33 PM Starting VE ...
Jul 17, 2008 01:05:33 PM vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244]
Jul 17, 2008 01:05:33 PM VE is mounted
Jul 17, 2008 01:05:33 PM Setting devperms 20002 dev 0x7f00
Jul 17, 2008 01:05:33 PM Setting devperms 20007 dev 0xac8
Jul 17, 2008 01:05:33 PM Adding port redirection to VE(1): 4643 8443
Jul 17, 2008 01:05:33 PM Adding IP address(es): 212.227.251.151
Jul 17, 2008 01:05:34 PM ERROR: Can't write to file /etc/sysconfig/network-scripts/ifcfg-venet0
Jul 17, 2008 01:05:34 PM bash: line 264: echo: write error: Disk quota exceeded
Jul 17, 2008 01:05:35 PM vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244]
Jul 17, 2008 01:05:35 PM VE is unmounted
Jul 17, 2008 01:05:35 PM VE start failed
Jul 17, 2008 01:05:35 PM Operation start with the VPS(s) VEID48606643 is finished with errors: #1004 Error invoking vzctl utility: Starting VE ... vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244] VE is mounted Setting devperms 20002 dev 0x7f00 Setting devperms 20007 dev 0xac8 Adding port redirection to VE(1): 4643 8443 Adding IP address(es): 212.227.251.151 ERROR: Can't write to file /etc/sysconfig/network-scripts/ifcfg-venet0 bash: line 264: echo: write error: Disk quota exceeded vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244] VE is unmounted VE start failed . Failed
Jul 17, 2008 01:05:35 PM Complete Process Failed