I have set up a HA network.
Web Servers #1 and #2 have their own IPS, but share a dedicated load balanced IP via the H5 Load Balancer.
We have our domain name registered with Yahoo!
How do we point the domain name at Yahoo! to the load balanced IP?
Any hosting company providing load balancing in from of 2 VM'S on separate nodes?
Look for a low cost solution to run an ATOM server on 2 separate nodes. No need for web sites, control panels, etc.
Just Jetty or apache + atom + postgres.
I have come across a number of hosts who offer Load Balanced hosting. I know that load balancing has something to do with distributing the requests to a cluster of servers. Bu how does it actually work?
What happens if I host my website on load balance hosting provider? Will copies of my website be placed on different servers and the website will be served from the server with the least load?
Has anyone any experience of using Load Balanced Clustered VPS servers?
If so who would you rate the best provider?
We have setup and are currently testing a load balanced cluster using heartbeat and ldirectord. One of the problems we have come across is that we are unable to reliably use the same web server for connections from the same user. As a result the php sessions are getting in a bit of a muddle.
Obviously its not something that we can easily sync between servers like the customers other web content. We are looking at either storing the sessions in a database or NFS.
The site is pretty busy and we are a bit worried that when the site goes live both these options will slow everything down.
Apart from using different load balancing software is there any other solutions we could use for this? Has anyone stored php sessions in a database on a busy site or on a NFS?
I currently have one server a
Dual Xeon 5130 2GHZ (woodcrest)
2GB Ram.
Running cPanel/WHM
Now I run a website that is VERY PHP & MySQL Intensive and MySQL is ALWAYS the top of the process list, hogging a ton of usage. It's getting to the point where the site is needed a second server and I know there's a few options; but I'm not sure which one would be the best.
They way I see it my two options are getting a 2nd server and setting up the two to do load balancing, or getting a 2nd server and setting one up for just Apache and the Other for MySQL and using the 2nd as a remote SQL server.
If I do the Apache on a seperate server would I need such a powerful server? And if I also would want to upgrade this server along with getting a 2nd server would I be better of upgrading to 4GB of RAM or upgrading the processors?
One of our customer is looking to use wild card SSL on one of his site hosted with us, he needs clarification on following.
Quote:
We want to have load balanced site serving contents from three different Apache on different physical machines. Site needs SSL security and we will have wildcard SSL for it. However, since the CSR is generated from one apache, will the SSL certificate give errors or alerts if the request is transferred to other apache?.
This is something I am not aware of, infact no such need come thru.
have a website that sources a number of jquery plugins, when I load the site in chrome or firefox the javascript console is saying that these files were not loaded.
The server is a localhost and the files are local.
The google jquery file loads fine.
how I need to configure the apache config file to deal with javascript.
is this a good deal for a sever for $69 a month
320GB STORAGE
3,000GB MONTHLY TRAFFIC
2.6Ghz AMD PHENOM II X3
2GB RAM MEMORY
how do i prevent the hosting company from significantly raising my monthly cost?
What type of server and connection I need to handle more than 50.000 visits per day in a Webserver Front-End / Database Back-End.
View 5 Replies View Relatedi have VPS CentOs5 running 2.6.9-023stab044.11-entnosplit with Plesk 8.3 Panel ..
last nigth when i was talking with the support center and i past my root passwd ..
after 10-15 mnts some attacker has change my page (index.html)
the server is new .. i just take VPS server before 3 days .. so there is no way to upload or run any php script ( worm ) in my server kz i didn't install anything there else (.html) pages ..
so i stop my VPS tell today and now i change my password and run the command to find any php files in my Vhosts folder wich content my sites directory...
i didn't find anything there and everything looking as a Defualt..
now the question is there anyway for the attacker to hack NixCore V1.5.0 Support Center ...?
and if there any way to check my server if there any uploading new files? whatever is .php ; .pl ; .rar ; .gif ; etc ...
and what command to show what the user group have the root permission?
firewall for my new server. I will be running cpanel 11 on it... so i was looking into configserver.com . Are they good? Is there any other firewall software's you can recommend besides configserver?
View 3 Replies View RelatedIs this possible we can scan virus on the account on server?
View 1 Replies View RelatedI'm wondering what the benefits are from switching a hosting server's nameservers to OpenDNS's.
Will this be better for the server or will it cause issues?
I rented out a server from leaseweb for 6 months (prepaying) before doing any real researching.. the price was great but the support apparently sucks. Now that I found this out, and my server hasn't been setup yet, I want a full refund. I've contacted them via email, but yet to recieve a response; who should I contact or what should I do.
View 12 Replies View RelatedThis weird issue has poped up only this weekend , when csf blocks all ips and even ssh, email and all services are not accesible, even though server is working, but firewall puts a block on everyone, and appears offline to others, any ideas why csf and iptables are not responding and acting in this behavior, i asked jonesolutions.com last time it happened i got no reason/response which could be the culprit.
Could it be the kernel update/upgrade that was done, to optimize load which broke csf and its working?
as this is 2nd incident over last 2 days , and i had thought my management had fixed it. Upset here over the unwanted for no reason downtimes!
Here is the output for this command after i restart csf again, and thats like average too i get over the entire day.
root@webhosting1 [~]# netstat -an |grep :80 |wc -l
188
root@webhosting1 [~]# netstat -an |grep :80 |wc -l
168
Connections to server dont seem to be high enough to pooch the firewall.
With increased traffic lately I'm trying to plan my next move so I was hoping for some kind recommendation from you guys.
My current setup is 1 VPS from knownhost (managed) where i have my wordpress sites and 1 VDS at FDC (unmannged) for static content like images and zip files but i would like to have everything in one place because it would work out cheaper.
So the question is would i be risking too much if I moved my whole site to a unmanaged dedicated sever without having any expreice other than very basic stuff like intalling afp/ddos deflate?
Right now it seems like their isn't anything to it except upgrading the OS or mysql and things like that in the future...
to put together a file server. This server will only accept SFTP connections and send/receive data. Also, planning to use RAID 10 with a hardware controller. Just looking to get a feel for the CPU and RAM. While the server load will not be much, scalability is a factor when considering hardware.
View 7 Replies View RelatedI am looking for a dedicated server for my flash games site. I am currently using 1and1.com for a Titan 16gb ram, 6gb monthly transfer(bandwidth) but not enough. I end up paid almost $2k last month. So I am need is at least 15-20gb bandwidth monthly transfer and about 8gb ram....
View 7 Replies View RelatedWe want to build a file server in our office - either Windows or Linux (doesn't make a difference to us).
We have a lot of satellite offices, and want to have certain computers have access to specific files/folders on the fileserver.
The catch is this... we would like some of our satellite computers to "sync" with the files/folders on the fileserver.
For example, a developer who is constantly working with a particular client, will always want his/her files to sync up with what is on the server.
The developer will want to work with a local copy of the files, and once finished, will upload them to the file server.
A few days go by, and there is a possibility the fileserver has additional information for that client. The developer would then want to download the changed files from the fileserver.
The benefit of working with local files, is that it is quicker to make changes. We can always leave the desktop on overnight to sync between the fileserver and the desktop.
Any suggestions what to look into here?
All of our desktops are on Windows, so we would need a windows application that has this functionality.
Rsync seems to be the closest thing I've found so far.
I will buy a new Dell server to stream webcasts and also do live streaming.
I will buy a PowerEdge 2950 III with 2 CPU's 2.5 GHZ and 8MB Ram.
I have my web server hacked several times and I am beating my head against the wall trying to find the problem(s).
Way back when my sites have been defaced and CHMODing my *.html files to 744 seemed to have done the trick
Now someone has put a phishing site somehow, which by the way I'm not able to remove still, I can't help but to think that I may have more CHMODing to do, I have recursevly set my site to 755, shoud this do the trick? I know I need to chmod .htaccess and alike files to 644, but what about...imagesCGI/PHP?cssetc?
What other steps can I take to secure this thing?
it's a shared host, limited access, but I do have SHELL.
we are expanding to offer vps. i have seen diferent servers config. but am not sure what to choose in terms of hardware
View 14 Replies View RelatedIn fact i am a customer of PC-CORE.net's directly customer.They send me a email to let me translate my website a few days ago.But i was in a travel then.I recieved it yesterday night. But it is too late that i cannot enter my website then.It is likely the sever ha been shutdown.My ip was 64.191.125.149.The guy rent me the space said he is powerless with it.
I did not get any backups of my site.They are gone when i format my hard drive last time.But the website's date is very important with me.
Anyone related with it?What i can do to save my site? What is going on with PC-CORE.net?
My host [in USA] that I only use for php/mysql points to my static content CentOS server [in Japan] in my house connected to my CATV. At least for testing (outside my house) I can't notice any bad latency since my USA host just serves up small HTML code dynamically and the static content (up to 100k-500k per file) is already available inside Japan. I want to keep (and scale up, if needed) my php/mysql in USA due to language and other issues so I'm hoping (?) as the number of users goes up (or any other issues I can't think of now) latency does not become a problem just for the html. Any comment on that?
My next step to "create" balanced static hosting in Japan is to get two different VPS accounts here in Japan (on two different physical servers) and use php to randomly select which VPS will provide the static content when a user logs in. PHP will also test to make sure the static server is active. If it is down the code will direct to the other server. If my project grows I will - on the Japan side - get more VPSs or even multiple dedicated servers and use the php to manage this "balanced" system like I described.
I have IIS with the default site and a site i created. it appeared to be configured correctly but even from the server if i try to "browse" any of the pages i still get "internet explorer cannot display the page" from my site and "under construction" from the IIS default site.
View 7 Replies View RelatedI have a machine which runs on Desktop board with 1 LAN port built in.
I just bought a new USB-LAN and plug into the USB but I have question about how to configure it. I cannot see eth1 inside /etc/sysconfig/network-scripts, so where can I configure USB LAN?
I got dedicated server with plesk 7.8 installed on it. Can anybody tell me what to do next to add new website.
I have ip through which i can login to plesk control panel.
I want to know how can i create name servers which i will use for my domains like ns1.abc.com ns2.abc.com.
What setting i need to create by use DNS button in control panel to run my sites properly.
I'm over here trying to rebuild php with GD in WHM, I go through the entire motion of Apache Update (with GD selected as a PHP Module) and ummmm... after it's done, I check my phpinfo() and there is no GD section, let alone has the build date been changed.
View 9 Replies View RelatedI am moving my servers this week and my new host doesn't do domain hosting. This is my first time doing it, I need help in pointing my domain to the new server. I just need the basic settings for A, CNAME and MX records.
View 13 Replies View Relatedhow to which will help me to make a correct configuration of mail server. I want to set up a mail server with e.g three domain names and all three domain names will have few similar email addresses like info, sales, marketing and so on. I know that this can be done by using control panels but I am not big fan of control panels I want to do a pure Linux administration using the command line.
View 6 Replies View Related
