i recived below email from my server!
what is this and what should i do
i don`t use any SSL
Certificate for dovecot on server.test.com was expired and a self signed one was created to replace it. You should install a new certifcate as soon as possible to replace the self signed one that was installed to replaced the expired one. You can install a new certificate in WHM under "Manager Service SSL Certificates", or by clicking this link: [url]
i recived below email from my server!
what is this and what should i do i don`t use any SSL
Certificate for dovecot on server.test.com was expired and a self signed one was created to replace it. You should install a new certifcate as soon as possible to replace the self signed one that was installed to replaced the expired one. You can install a new certificate in WHM under "Manager Service SSL Certificates", or by clicking this link: [url]
I just upgraded from Plesk 11.x to 12.0.18 and was eager to try the new sieve functions. I used the normal Plesk Updates/Upgrades tool to change the imap server from Courier to Dovecot. However, Dovecot will not start. It gives an error about /etc/dovecot/private/ssl-cert-and-key.pem missing.
View 2 Replies View RelatedI need to determine which mail server is better so i can know what to install as default on future servers.
View 9 Replies View Relatedi have cpanel with 512 meg ram.
i need fast mail server. so which of them is good?
Courier or Dovecot
I have installed dovecot from source some time ago. Now i require it to be thoroughly removed. regarding the procedure for a proper uninstall.
View 5 Replies View RelatedI have a what seems like a quick question. I'm hosting my own DNS servers via bind, and everything seems to be nice and dandy. However, I cannot seem to receive email, and when I do a check via pingablity it tells me there is a timeout error when trying to reach my MX record. I *am* able to access the POP/IMAP server (which is powered by Dovecot) through Outlook and other email clients.
I know it is an issue with iptables because as soon as I turn it off pingability is able to reach my mail server just fine. I do have port 53 open as well as 1024-65535 UDP ports open. I've scouted internet for hours trying to find the cause of the problem with no results.
This is a fresh installation in AWS using AMI for Plesk 12.
When installed with Dovecot I got this error when trying to login to mail:
Jun 28 12:23:44 server1 dovecot: imap-login: Disconnected (auth failed, 1 attempts in 2 secs): user=<someuser@xxxxx.com>, method=DIGEST-MD5, rip=127.0.0.1, lip=127.0.0.1, secured, session=<mfryjpUZdgB/AAAB>
If I switch to Courier works perfect:
Jun 28 12:35:53 server1 courier-imapd: Connection, ip=[::ffff:127.0.0.1]
Jun 28 12:35:53 server1 courier-imapd: LOGIN, user=someuser@xxxxx.com, ip=[::ffff:127.0.0.1], port=[35677], protocol=IMAP
Jun 28 12:35:53 server1 courier-imapd: LOGOUT, user=someuser@xxxxx.com, ip=[::ffff:127.0.0.1], headers=0, body=0, rcvd=52, sent=156, time=0
In normal servers or under Virtuozzo (formerly Parallels Cloud Server) Dovecot works without problem.
on a fresh debian 7 64bit openvz system we actually have a problem with the new plesk 12 feature of limiting outgoing mails.We migrated about 25 systems to plesk, this is the first that makes problems.If limiting outgoing mails is activated (i double-checked all possible checkboxes in plesk) a fresh mailbox gives us the following error while trying to send via smtp:
Aug 15 13:09:32 2d4 postfix/smtpd[8645]: connect from unknown[XX.XX.XX.XX]
Aug 15 13:09:32 2d4 postfix/smtpd[8645]: E9AF61C58851: client=unknown[XX.XX.XX.XX], sasl_method=PLAIN, sasl_username=XX@XXX.XX
Aug 15 13:09:32 2d4 greylisting filter[8651]: Starting greylisting filter...
Aug 15 13:09:32 2d4 /usr/lib/plesk-9.0/psa-pc-remote[8611]: handlers_stderr: SKIP
[code]....
After deactivating the feature all mail is sent without any problems. We use postfix + dovecot.
I did the following configuration:
Postfix
in the /etc/postfix/main.cf I added the following configuration parameter
recipient_delimiter = +
Managed a sieve script in webmail which contains the following:
1: # Sieve Filter
2: # Erzeugt von Ingo (http://www.horde.org/apps/ingo/) (03.02.2015, 02:53:39)
3: require "fileinto";
4: # Plustest
5: if address :all :comparator "i;ascii-casemap" :contains "To" "+plustest" {
6: fileinto "INBOX.plustest";
7: stop;
8: }
I created a folder in my INBOX with the name plustest, now I sent me an email from an outside freemail-account to see if it works. In the logfile /var/log/maillog I can see the following entry:
Feb 3 15:06:25 mail postfix-local[18290]: cannot chdir to mailname dir <name>+plustest: No such file or directory
Feb 3 15:06:25 mail postfix-local[18290]: Unknown user: <name>+plustest@<dom.tld>
Feb 3 15:06:25 mail postfix/pipe[17708]: 0ECAF4C1B3: to=<name+plustest@dom.tld>, orig_to=<aliasname+plustest@dom.tld>, relay=plesk_virtual, delay=0.61, delays=0.52/0/0/0.09, dsn=2.0.0, status=sent (delivered via plesk_virtual service)
I changed my real name to <name> and my domainname to <dom.tld> in this post.
Ubuntu 14.04 with Plesk 12 (10 Domain License).Using this for mail only... multiple domains.Postfix and Dovecot installed. Trying to figure out how to do:
- SASL Auth (Dovecot)
- TLS
- want above two to be mandatory... no plain text auth and no unencrypted connections.
How do I achieve this with Plesk 12?I have found countless how-to's about doing this with Vanilla (non Plesk) installs with the same server software. However, Postfix main.cf and master.cf both appear to have specific Plesk modificatuons. Same thing for the related Dovecot conf files... also have Plesk specific modifications.
I see no way to enable the desired settings from the Plesk Panel. Can't achieve this within the Panel but also can't modify the conf files without potentially breaking some Plesk-specific functionality? My original hope in purchasing the Plesk license was to make administration of the mail server easier. Unfortunately, I'm struggling to do this now and may have already had this figured out had I not bothered with the Panel.
i use Plesk on a vserver which was offering it in version 11.x, i upgraded to 12.0.18, then i installed Dovecote on the panel. Everything went fine. Mail server is working.BUT sieve does not allow me to login and create filters.I tried telnet against 4190, and it works:
Connected to mail.xxxxxxxx.xxx.
Escape character is '^]'.
"IMPLEMENTATION" "Dovecot Pigeonhole"
"SIEVE" "fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags notify"
"NOTIFY" "mailto"
"SASL" "PLAIN LOGIN DIGEST-MD5 CRAM-MD5"
"STARTTLS"
"VERSION" "1.0"
OK "Dovecot ready."
But when i use my sieve plugin for thunderbird OR access plesk's webmailclient Roundcube opening the filter module, it doesnt work. On Thunderbird i see the loading animation, thats it. On Roundcube it says "Unable to connect to sieve server".
Looks like something is missing. I can definitely access 4190 on my server from anywhere. So no firewall issue. I didnt change anything on configs, since plesk is handling it.Roundcube log doesnt give me anything. I dont even see logs added (to syslog or mail.*) while i try to connect.
if i create a new mailaccount in the power-user panel and i dont log in into the webmailer, so the "subscription" file is not created.
that means there is no way to sent emails with the new created account with external mail clients (Thunderbird), because there is no "sent" or "drafts" folder.
the problem disappears, if i log into the webmailer after creating a new mailaccount.
is there any other way to fix this bug? i want plesk 12 to create the "standard" folders (Trash, Drafts, Sent, Spam) automatically.
something to the used system:
- Ubuntu 14.04 Server
- Plesk 12.0.18
- IMAP/POP3 Server: dovecot
- SMTP Server: postfix
(logfiles are not showing anything..)
Every time i use Dovecot secure IMAP server with Sieve support.I can not receive emails note. Upgraded from 11.5 to 12
Jun 18 08:03:36 CO6302 postfix/qmgr[1523]: 284FAA0E86: from=<my@gmail.com>, size=1943, nrcpt=1 (queue active)
Jun 18 08:03:36 CO6302 postfix-local[2036]: postfix-local: from=my@gmail.com, to=the@domain.com, dirname=/var/qmail/mailnames
Jun 18 08:03:36 CO6302 postfix/pipe[2035]: 284FAA0E86: to=<the@domain.com>, relay=plesk_virtual, delay=336, delays=335/0.01/0/0.19, dsn=4.3.0, status=deferred (temporary failure. Command output: lda: Error: user the@domain.com: Error reading configuration: Invalid settings: postmaster_address setting not given lda: Fatal: Internal error occurred. Refer to server log for more information. 4.2.1 Message can not be delivered at this time )
[code]...
I know I'm probably doing something wrong, but I cannot get Android KitKat phones to authenticate via IMAP to my Plesk 12 server (straight out of the box). Not sure if it is an issue with standard dovecot config or Android, but the only way I can get them to connect is via pop3.
View 3 Replies View RelatedI have set up a vacation filter in Horde, but only in once in a while it really returns a vacation message, depending on who is sending an email. In most cases,the message arrives without triggering a response.The messagelog shows two scenarios, one for an successful vacation response and one for emails that fail to trigger a response.Sucessful event:
Oct 9 10:48:24 server dovecot: service=lda, user=xyz@mydomain.com, ip=[]. sieve: msgid=<408-EAS2941777BF41EEBE6640B691D3A00@axy.gbl>: sent vacation response to <guntherk@hotmail.com>
and then
Oct 9 10:48:24 server qmail: 1412844504.308454 starting delivery 21782: msg 33566019 to remote abc@externaldomain.com
then the message is stored into the users inbox.
Unsuccessful event:
Oct 9 10:55:39 server dovecot: service=lda, user=xyz@mydomain.com, ip=[]. sieve: msgid=<trinity-90b5e87d-183b-49b8-8e3e-d2f98b96df3e-1412844932925@uvw-com>: discarded vacation reply to <>
then the message is stored into the users inbox.
The actual version of Plesk (v12.0.18) on Centos 6.5 with Dovecot & Qmail is beeing used.
OS: Centos 6.5
Plesk 12.0.18 Update #23
Rouncube 1.0.0
I have had Roundcube installed and I went and changed the mail server from Courier to Dovecot. Is the installation of Dovecot supposed to make the 'Filters' tab appear in RoundCube or is there more that is supposed to be done?I tried reinstalling Dovecot & Roundcube and the settings still do not appear.
I use for my client the webmail Roundcube.. How to I set for Auto Deleting The Mails From Trash Folder and Junk with mail server Dovecot after 30 days?
View 2 Replies View RelatedI am trying to set up a mail server with postfix and dovecot. However I am getting a status = deferred error instead of status = sent in my log and the mail will not be sent. Sending a mail to hotmail/gmail works fine though.
I used this tutorial [url]
And later updated to the Lenny tutorial [url]
The mailserver is running on Ubuntu 9.04 (desktop/32bit).
Log
Code:
Oct 24 14:29:19 pws-desktop postfix/qmgr[17007]: C01F71FE146: from=<steve@example.com>, size=341, nrcpt=1 (queue active)
Oct 24 14:29:19 pws-desktop postfix/pipe[17035]: C01F71FE146: to=<john@example.com>, relay=dovecot, delay=0.22, delays=0.15/0.01/0/0.06, dsn=4.3.0, status=deferred (temporary failure)
The OS is running on a Dell 1600SC.
Ubuntu 9.04 Desktop x86
Kernel: 2.6.28-16 generic
Dovecot: 1.1.11
Postfix: 2.5.5 (both provided by the ubuntu server team and installed using synaptic)