I'm about to buy server for hosting but how is it possible to make two different IP's from one server?
I mean some places won't let register unless you have two different nameservers with two different IP's.
While I am used to reselling and domain registration stuff, I am totally new to DNS stuff..I tried many searches and readings without hope.
that's why I need your help.
We have a problem that makes both incoming and outgoing emails from our website's email server not going or received, without any failure message or error message on both sides: the sender and receiver.
We talked to our webhosting company- they do not own, but host on a dedicated provided by Iweb in Canada - and they told us a quick solution for this:
To buy a private IP address, therefore our websites with them will not get blocked as spammy IP, setting us away from the dozens of sites they have on the same server IP (as domaintools reverse IP reported: xx other sites hosted on this server).
The company I work for agreed on this solution immediately as we are loosing customers for this problem.
They charged us 8$ a month for this "private ip".
We had the same problem for another day after their solution, when I checked domaintools, I found our websites are still on the same IP of the company. I called them, and the Admin there told me: it's a hidden CNAME setting that is not shown to public because it's "private" and the delay happenned because we had to contact Hotmail staff and wait for their reply to include it in their safe list, but others as Gmail and Yahoo do not require contacting them and will go through automatically."
My question is:
- What is Private IP/ Private DNS?
- Why and how it is used to prevent false blocking/bouncing?
- Does that mean they had to sell it to every domain, while their IP is not on blacklists (I checked it).
- Is Private IP just an internal setting or it has to be bought from a large ISP
like regular/public IPs? and if just some settings, is this price fair? we pay 120$ annually for hosting one site with them.
- They told us they put our other two sites on theis same new private IP. How can this be possible?
- I cannot understand: Hotmail can prevent our emails from reaching inboxes, but can it also prevent its users emails from reaching us?? Is this issue a Private-IP related??
- What do you think the real problem is, and what advice(s) should I follow to have our emails going and coming smoothly in the future?
Note: We don't send unsolicited emails ever. We only have a 1500-member mailinglist that we send a newsletter to, once every few months.
Our daily email traffic is about 10 to 20 messages in and out.
Has anyone bought hardware from IT Outlet?
I am considering purchasing a couple Cisco items from them.
Some informations about it
Disk 30 GB
Backup 0
Burst 256 MB (both guar?)
Guar 256 MB
Memory 0 MB
Cpu 400(AMD Opteron 2356)
Traffic - (the plan shows 400 GB,but nothing in hypervm)
Swap 0 MB
CpuUNIT 0
Ioprio 0
CpuNum 0
Will the nameservers work if the nameservers are pointed to a parking page?
For example:
I need to change my nameservers to ns1.mywebhost.com and ns2.mywebhost.com
(nameservers are made up)
These nameservers are from my web hosting service provider. When I visit the nameservers, it shows up a parking page from a domain parking service (let's say NameDrive parking page)
Will the nameservers function correctly and will my websites work? I have this question because usually the nameservers that I use, they always point to a CP page or something like that rather than a parking page.
Server 1 (main domain resides here example.com)
domain = example.com
current nameserver = ns1.example.com
current nameserver = ns2.example.com
Wanted to use the same domain name to create a new nameserver on server 2.
Server 2
ns3.example.com
ns4.example.com
How do I do that?
I am running a very small webhosting company,and have one server with cpanel.I have set up the nameservers of server.
For example:ns1.mydns.com & ns2.mydns.com
And now the server is full and I have set up another server.How should I set nameserver?I have to change a domain?
For example:ns1.mydns2.com & ns2.mydns2.com
So that means if I have many servers,I have to register many nameservers?
How can I set one domain nameservers to these servers?
How does Name servers setup with dedicated server? can I ask my hosting provider setup private name servers for my clients (who will be on shared and VPS?)?
We will use IP addresses for this reason? Is Hyper-V available on Windows 2003 standard?
I am currently using for example these nameservers:
ns1.mydomain.com
ns2.mydomain.com
but I am also thinking of offering hosting, and would like to setup seperate nameservers for example:
ns1.myhosting.com
ns2.myhosting.com
Is it possible to do this, with both sets of domains utilising the same dedicated server?
Would they all need seperate IPs, or can I use the same IP that ns1.mydomain.com is using for ns1.myhosting.com?
I hired a guy to secure and setup nameserves on my dedicated box. I'm on a time crunch and have not heard from him in 24 hours, so thought I'd ask here.
How can I find out if nameservers are running on my box, and what IP they are running on?
I recentely signed up for a dedicated server and paid for 10 domain plesk pack, and can setup everything with plesk for hosting just fine
Do I use my IP for the server as the name server or do I add dns entries for ns1.domain.com & ns2.domain.com?
What name servers do I use with my virtual dedicated server on godaddy ? i talked to them on live chat and they replied to read this page [url]
I followed the steps but when i login to control panel at godaddy it doesnt show links which are said in the above topic.
My domain is registered at yahoo domains and i purchased virtual dedicate server hosting at godaddy.
Is there a way to use ns1/ns2.yourhostdomain.com for not only your shared hosting clients but also for your linux AND windows 2003 dedicated server clients (or vps)?
View 1 Replies View Relatedour company is ordering a new dedicated server and we are a little unsure what we should choose as far as the full hostname and nameservers of this one server.
This server will have a couple different websites on it, but really, there is only one BIG website on it... let's call it abcd.com.
While most would pick a hostname of host.abcd.com for instance, if at all possible, we would like the domain name part of the hostname to be something different than abcd.com. We own a domain name that doesn't point to anything yet (unuseddomain.com) and we were wondering if we could use that domain in our hostname.. host.unuseddomain.com.
And instead of using abcd.com as the domain name for our own nameservers (ie. ns1.abcd.com, ns2.abcd.com), we would like to again, use the unused domain name we own (unuseddomain.com) for the nameservers domain name: ns1.unuseddomain.com, ns2.unuseddomain.com.
So...
Will this work? Is this perfectly acceptable?
And lastly...
Since the one website we really care about on this server (the one we got the server for in the first place) is abcd.com, is using the unuseddomain.com for the hostname and nameservers (as above) a bad choice in anyway regarding email deliverability? I understand that mail ISP's (hotmail, yahoo, etc.) do all kinds of checks on hostnames (PTR), etc... and we want to make sure that we aren't hurting ourselves in anyway by using an "empty" domain name that we own as our hostname's and nameserver's domain name.
For instance, if we send mail from the abcd.com account, it will use mail.abcd.com (1.1.1.1) as it's outgoing mail server... Hotmail will see this... do a reverse-dns lookup on 1.1.1.1 and see host.unuseddomain.com. See what I'm saying? It all will work, but will it toss up red flags?
I have a dedicated server, and WHM cPanel
I have a registered domain with oneandone (mydomain)
So what I want is nameservers, ns1.mydomain.com and ns2.mydomain.com when people are viewing any of the sites on my server.
Basically i need to know, step by step on how to, do this, please I have read all the guides but they dont say exactly how oneandone point to my server, I think I have done most stuff on the server side.
So I want a site mydomain2.com they can change their nameservers to ns1.mydomain.com and ns2.mydomain.com and it links to my server.
I think i have only 1 IP with my dediated server.
Will domains still function if they have differing nameservers at the registry from what they do on the server side? i.e. domain1.com pointing to ns1/2.example.com at the registry but on the server the DNS zone has it as ns1/2.example2.com, baring in mind both sets of nameservers are pointing at the same server.
View 2 Replies View RelatedI have purchased a reseller account from www.reseller.net (not real names) They provide me with ns1.reseller.net and ns2.reseller.net, as well as the two associated ip addresses. They tell me to use these 2 ip addresses to set up my own custom nameservers.
I want my own nameservers - ns1.mydomain.com and ns2.mydomain.com. Tech support at www.reseller.net tells me thay cannot help me. They tell me to go to the company where I purchased and manage the domain name www.mydomain.com.
I do, and find the control panel page where I -CREATE NAME SERVER-. This I do, and I use the above mentioned ip addresses. This seems to work. When I go back to this control panel page the next day, the entries I made are still there. Yet, I cannot "ping" my nameservers.
Now what? I have tried "google-ing" and not being a super-tech, I get lost. It appears that I must make some changes in my WHM, (I have a WHM...), but I have no access to any "Server" settings.
I have another reseller account with a totally different company, and when I asked them to set up custom nameservers, they just "did it" for me. Again, the hosting company was not related to the domain registering company.
I am experimenting with setting up my first unmanaged dedicated server.
I have directadmin as a cp.
I have 5 separate IP's available to me.
I went to my domain registrar and set up host as ns1.mydomain.com and ns2.mydomain.com using my first two IP's that are available.
My question now is what is the best way to use my three remaining IP's? Do I set them up as completely different domain nameservers ie. ns1.otherdomain.com etc.? Out of those three, I thought you need two IP's per nameserver domain? Is that wrong thinking?
I don't want any relationship shown in a whois dns info between the ips.
How to configure DNS(nameservers) without cP/WHM and any other Control Panel. I can use your only SSH for it.
OS = CentOS5
DNS Server: Bind
If i create a vps using openvz and use a new ip for that vps e.x:
123.456.789.0
What nameservers i must use to point my domain to that vps?
NS1 <--- 123.456.789.0
NS2 <--- ?
how can i run some VPS(diferent ip's) in a DedicatedServer with same nameserver.
example:
all sites in VPS1 using ip: 10.10.10.1
all sites in VPS2 using ip: 10.10.10.2
all sites in VPS3 using ip: 10.10.10.3
all in a DedicatedServer
now i want using ns1.dns.com for all sites.
xen/openvz on Centos/RHLE used.
I recently bourght a dedicated server, and found out I don't know whta my name servers are, the company gave me there nameservers, I was fine, but when I input my name servers in namecheap or godaddy ect, I get this:
Quote:
There is some problem updating the NameServers
The problem is: nRRPResponseCode 541
I just have a question on setting up Nameservers in WHM. Is it necessary to add an "A" entry to the name servers, and if so, do I need to do so on both nameservers, or just the first one?
ns1.mysite.com
ns2.mysite.com
What's the reason/ necessarily for adding a A entry to a nameserver, and can it be skipped?
hello
i really rely on your expertise guys please help me!
a cpanel server A has some domains on host 1
a new cpanel server B is set ready for migration on host B.
the greek registrar i use,
by accident (As they say) switched ips for my nameservers from A to B and the migration has not been done!!!!
can i set up a record or something on server B to forward all traffic back to server A ???????
Sorry i'm not a network expert. That's why i'm here
thanks
simos
I have a domain at Enom and I have a use for it which would require it being assigned an IP address rather than nameservers in order to reach the server it would be hosted on - I have 2 questions please:-
Would doing it this way bring any penalties in search engine ranking, PR or any other problems?
How would it best be done at Enom?
i have started moving domains from Cpanel/whm server to my HSphere server that uses a new nameserver, but have come up against problem with the new NameServer.
When moving .biz .info i get error about nameserver not being resgistered, after doing some seaching it appears that some domain resgistrars (in this case 123reg) are starting to enforce a security feature whereby All registrars need the name server registered before you can point any domain name to the name server.
Diggin further i found this at stargate.com which where i have my HSphere service domain:
1.
Registering a Child Name Server as mentioned above is just the first step. The Child Name Server needs to be registered at the Registry to only serve as a non-authoritative Record should your Child Name Server not be resolvable in some extreme condition.
This Name Server would start working only after you have added an Address (A) Record or Canonical (CNAME) Record for this Name Server within the Zone for the domain name (of this Child Name Server) at your own DNS Server, thus binding the NS to the IP Address.
Examples
i. If you are running your own DNS Servers then you would need to add a Zone for the domain name your-domain-name.com and create an A Record like
ns1.your-domain-name.com. 38400 IN A 111.222.333.444
ii. If you wish to simply point your Name Servers to another Name Servers, you may add a CNAME Record to those (while ensuring that those Name Servers have an A Record within the Zone created for your Name Servers as well).
ns1.your-domain-name.com. 38400 IN CNAME ns1.service-provider.com
Also at ns1.service-provider.com there should be an Zone for your-domain-name.com with an A Record for ns1.your-domain-name.com, making it authoritative for resolving your-domain-name.com.
In most cases your ISP would have already created the above for you and you need not bother about the same.
My service domain, and one i am using for nameservers, HSphere dns settings looks like
Name TTL Class Type Data Action
cp.mydomain.net 86400 IN A 85.264.15.83 Click to delete
ns1.mydomain.net 86400 IN A 85.264.15.84 Click to delete
ns2.mydomain.net 86400 IN A 85.264.15.85 Click to delete
web.mydomain.net 86400 IN A 85.264.15.86 Click to delete
mail.mydomain.net 86400 IN A 85.264.15.87 Click to delete
mysql.mydomain.net 86400 IN A 85.264.15.88 Click to delete
So from what i tell i have furfilled critria?
I have to say i am a little confused over this!
I am thinking that maybe i have to make some changes at stargate.com or maybe get my co-lo provider to make changes?
I was looking for a tool that would allow me to enter a Nameserver, and it would then return the Domains that use that Nameserver in its DNS.
I see domaintools.com has a tool that does it, but it costs. Is there a free one available?
I have created 2 nameservers and assigned unique IPs to them and I have my domain dhingana.org using them. Everything was fine until today when suddenly I cannot reach dhingana.org.
I restarted BIND, Apache and even my server but still the same issue. I checked that Apache is still running.
My DNS reports for dhingana.org says:
A timeout occurred getting the NS records from your nameservers! None of your nameservers responded fast enough. They are probably down or unreachable. I can't continue since your nameservers aren't responding. If you have a Watchguard Firebox, it's due to a bug in their DNS Proxy, which must be disabled (31 Jul 2006 UPDATE: several years after being informed of this, there is a rumor that there is a fix that allows the Watchguard DNS proxy to work).
I have added a new ip for my nameserver3 and now it is pingable... But when I try to point a domain it says something like "check SOA record for your nameserver3" etc...
How can I add SOA records for this new nameserver via whm or?
Just got a new dedicated box (Fedora 5/CPanel/WHM). I didn't realize I had to set up my own nameservers with it. Definitely not a subject I am well versed in. Anyone know where I can find out how to get started?
View 9 Replies View RelatedI have a question on how to set up (clone) two nameservers.
I have two VPS' with two IPs that are totaly independent of each other. Both running ispCP with Apache2, mail, ftp, mysql, AND bind9 as DNS managment.
So. I want these two server to be as independent as they are, BUT they should share NameServers with each other.
Something like this:
host1:
ns1.domain.com = host1
ns2.domain.com = host2
host2:
ns1.domain.com = host1 (or host2?? = inverted)
ns2.domain.com = host2 (or host1?? = inverted)
A lot of domains are running more then one NameServer, but I could not find any tutorial on how to "clone" the NS from one to an other. Is it enough to just add some kind of "transfer to IP setting" in bind, or do I have to have scripts that download settings and files from one server to an other regularly?