can anybody tell me more about Background Process Killer on cpanel?
BitchX
bnc
eggdrop
generic-sniffers
guardservices
ircd
psyBNC
ptlink
services
what are them and which of them must enable in Background Process Killer option?
So ive installed a bit torrent client on a server for a corporate client to server an internal application they use.
When I run the following code, it starts to seed it fine, however as soon as I close the ssh session which started the seed, it stops seeding.
Ive tried adding an & to the end of the command, however the same thing happens.
Anyone got any ideas how I can get the following line to start as soon as the server boots, and keep running 24/7?
The command is;
btdownloadheadless.py --url [url]
top - 19:57:53 up 3 days, 23:39, 1 user, load average: 43.91, 43.52, 36.36
Tasks: 313 total, 19 running, 294 sleeping, 0 stopped, 0 zombie
Cpu(s): 85.2% us, 14.8% sy, 0.0% ni, 0.0% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 2073804k total, 2019960k used, 53844k free, 26992k buffers
Swap: 2096440k total, 11176k used, 2085264k free, 839880k cached
PID USER PR NI %CPU TIME+ %MEM VIRT RES SHR S COMMAND
4657 mysql 15 0 49 1146:03 12.2 414m 247m 3088 S mysqld
10993 nobody 25 0 6 1:29.96 1.0 103m 20m 9240 R httpd
11157 nobody 25 0 6 1:52.78 1.0 105m 19m 7164 R httpd .......
I have a CentOS system (under VPS, virtuozzo) and I would like to run a background job.
Here what I did:
1. ssh into the server
2. execute:
$ ./myscript.php > output.log &
After executing that command, I got back to the shell prompt.
Then I can see the log file:
$ tail -f output.log
But when I close my ssh session (using putty), the background job is also closed!
Anyone know why?
How can I run background job, leave it running, and quit my ssh session?
On jaguarpc.com, their terms of service state,
"We do not allow programs to run continually in the background. This is to minimize system resources used and operational maintenance needed. We do not allow any chat or topsite programs on our servers other than the ones we pre-install for our clients to use. IRC: We currently DO NOT allow IRC or IRC bots to be operated on our network."
I thought the whole point of using a VPS was so you could run a continuous application (like a chat/game/etc server)? Why are so many VPS services against IRC (the chat server I use is not IRC based, but I just think its wierd so many prohibit IRC)
I'm running a script called hlstatsx which is a ranking system for game servers and it needs to be run 24/7
I use ssh to start it with this command:
perl hlstats.pl
However, I have to keep the ssh window open otherwise the script will stop. Is there a way to keep it running in the background even after I close the ssh window or logout?
I want to run a php script in the background every 15 seconds (otherwise I would simply use cron)... Would anyone be able to tell me how I would set this up?
View 2 Replies View RelatedI have a php script that is scheduled to run once a day via the Windows task manager. My question is how can I tell it to run in the background so the dos window doesnt pop up? Right now the line in task manager to run it is:
c:phpcliphp.exe c:path ophpscript
I am attempting to setup a script which will automatically append the proper file permissions [posix & acl's] to any new files on certain folders that I specify.
Someone Recommended
find /Users/Kevin/Desktop/TRANSFER -type f -exec chmod 777 {} ;
This only seems to run once and when new files put in I have to have the script run every so often as a cronjob, I really just want to have a script to change the permissions of files going into a folder.
I am unable to set the background for the users on a terminal server.
The server is running Windows server 2003 R2 64 bit Enterprise edition.
I have setup the background path correctly in the group policy for the ou where the users are located. However the background does not load. I have also enabled Active Desktop in the terminal services configuration manager.
Also when I try to set the background manually as the administrator, everything is grey and I am unable to set the background. I have tried to start the Themes service but this does not resvolve the problem. Do anybody here have a suggestion on why I am unable to set the background even on the administrator user manually? (the administrator user does not have any group policies activated).
To start the process in the background how and hide him?
In the system CentOS is command "screen" There is the command screen
a system debian does not have this command, only "&" but I do not know her to use.
Please pass equivalents:
Centos: screen
Debian: &
Centos: [CTRL] + [A] + [D] (detach)
Debian: ?
Centos: screen -ls
Debian: ?
Centos: screen -r
Debian: ?
We have many process under nobody user, so our server load is Very high and its not good.
Here is our server log about one of this process:
Code:
Time: Mon Apr 13 11:36:33 2009 +0430
PID: 4415
Account: nobody
Uptime: 25532 seconds
Executable:
/usr/local/lsws/bin/lshttpd.4.0
Command Line (often faked in exploits):
i have always this process in my server ;
Code:
2 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/0
3 root 34 19 0 0 0 S 0 0.0 0:00.08 ksoftirqd/0
4 root RT 0 0 0 0 S 0 0.0 0:06.43 migration/1
5 root 34 19 0 0 0 S 0 0.0 0:00.31 ksoftirqd/1
6 root RT 0 0 0 0 S 0 0.0 0:05.22 migration/2
7 root 34 19 0 0 0 S 0 0.0 0:00.82 ksoftirqd/2
8 root RT 0 0 0 0 S 0 0.0 0:01.41 migration/3
9 root 34 19 0 0 0 S 0 0.0 0:00.08 ksoftirqd/3
what doeas mean , and for wich application are this proccess
How can track and follow a process id.
For example i need to know what is following process:
14764 root 39 15 11712 9.8m 1668 R 20 0.1 0:14.22 perl
I need to know wich/where file used perl with process id 14764
I am noticing that the kacpid process causing high cpu load.
What does kacpid do? Is there a way to fix for this problem?
Quote:
# ps aux|grep kacpid
root 29 59.6 0.2 0 0 ? S< 22:13 42:20 [kacpid]
Quote:
# lsof -p 29
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
kacpid 29 root cwd DIR 8,2 4096 2 /
kacpid 29 root rtd DIR 8,2 4096 2 /
kacpid 29 root txt unknown /proc/29/exe
Quote:
# ls -l /proc/29/exe
/bin/ls: cannot read symbolic link /proc/29/exe: No such file or directory
lrwxrwxrwx 1 root root 0 Oct 30 22:13 /proc/29/exe
Quote:
# uname -r
2.6.18-164.el5PAE
Ive recently installed installed and configured stuff on my new box but after, I realised abnormal memory usage.
Mysql server is taking 256mb, there are somewhere between 6 and 10 apache process taking up at least 40mb each.
Furthermore, when I do: top, I see that the memory usage is increasing by about 120ko each 3 sec.
I am running centos 5.1 and have a load of 0. Basically, there is no one on the server appart from me.
On the server I have at home running debian, I run all thoose thing and it take up 200mb
max.
write me a daemon that will run every 10 seconds.
If <process> has failed or run into issues, restart the process and then email me with details.
After installing LiteSpeed on my server with cPanel, a few processes have been having issues.
<process> = /opt/lsws/bin/lshttpd, pureftpd, named
I'd like to put up here a base question which I hope some will have the goodwill to answer even though it might touch some business secrecies.
We're a gameserver hoster since around ten years, running also vserver products since over two years now. Renting a few Racks in Europe since some time we're a bit in a question mark how rootserver companies deal with the initial hardware costs for every new customer.
Rackspace and today specially power costs are huge cash eaters here in Europe. Dedicated Rootservers are huge space & power consumers per customer ratio. The initial Hw costs for every new rootserver customer might be covered after 4-6 months (if the machine has to be bought newly), adding the bandwidth and power costs it might take up to 8-9 months until a benefit might come in.
Is this the business normality in the rootserver market (waiting 9 months for any benefit, or counting only on the benefit of the 2nd customer using the older Hw), or are the better ways to handle those "initial" costs or keep them affordably low?
I am showing hundreds of running processes for:
/usr/local/apache/bin/httpd -DSSL
In My server i Can see lotz of /usr/local/apache/bin/httpd -k start -DSSL Process also some time it lead to crash of my server,is this caused to improper httpd.con file iam have 200-250 online users here i will give my apachi cofig file
KeepAlive Off
MaxKeepAliveRequests 200
KeepAliveTimeout 15
StartServers 20
MinSpareServers 30
MaxSpareServers 40
MaxClients 600
MaxRequestsPerChild 250
in correct optimization for my apachi also my processer is dual xenon
Whats is following peocess?
2011 root 0 -20 0 0 0 S 1 0.0 0:38.52 loop0
Is it normal for PHP to spike in cpu usage often? Which setting in php.ini can affect the cpu usage?
View 6 Replies View Relatedhow to sort this?
Top Process %CPU 98.9 ./dialog --clear --backtitle Zend Optimizer Installation --title Zend Optimizer 3.2.2 --msgbox ?Welcome to the Zend Optimizer 3.2.2 Installation!??For more information regarding this procedure, please see the?Zend Optimizer Installation Guide.? 0 0
Top Process %CPU 98.8 ./dialog --clear --backtitle Zend Optimizer Installation --title Zend Optimizer 3.2.2 --msgbox ?Welcome to the Zend Optimizer 3.2.2 Installation!??For more information regarding this procedure, please see the?Zend Optimizer Installation Guide.? 0 0
My hosting company is telling me that I have getting frozen processes on my VPS that is causing apache to stop responding.
My VPS is CentOS, with 512 megs of memory and my website is a Vbulletin forum. I have several add-ons installed on vbulletin, and if one of those are causing the problem, how do I figure it out?
When http stops responding, I can access the server with putty on ssh. Running the "top" command, it shows that I still have 100+ megs of memory free and the processor is barely being used.
This has happened twice in just 2 - 3 days. This morning, I asked my hosting company what can be causing this, but no answer so far.
I run a dedicated server, Running
CentOS 4.5 final
Apache 2.0.59
php 4.3.11
MySQL 4.1.20
I have a user who has been importing large sql databases and this causes the cpu to run at 80% - 90% this in turn causes high loads and sometimes causing the server to crash.
Is there a way to automatically limit or control how much the process can use or stop the process to allow the server to recover.
Just trying to put some sort of safe guard in place
How do I trace what user this is?
Code:
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME CPU COMMAND 9488 nobody 25 0 1612 1280 1108 S 21.1 0.2 619:37 1 perl bodyb3 200.101.193.42 0 5000
I also ran netstat -n and found this:
Code:
udp 15184 0 server.host.com:55936 ns1.datacenter.net:domain ESTABLISHED
I am having only 14 connections, but having many httpd processes.
root@server [~]# pidof httpd
1544 1498 1475 1239 835 686 684 572 570 535 478 32602 32601 32597 32544 32106 32 085 32082 30538 30536 29612 28981 28980 28978 28785 28778 28775 28759 28741 2843 4 28431 28428 28420 28394 28192 28116 27782 27694 27693 27692 27442 27399 27299 27288 27276 27262 27257 27252 27248 27146 27043 26970 26486 26385 26049 26023 25 703 25679 25621 24603 24602 24600 24526 22025 21963 21950 21915 21870 21858 2179 4 21697 21673 21525 21223 21211 21001 20784 20783 20780 20721 20713 20704 20696 20613 20605 20603 20179 19909 19718 19711 19530 19463 19462 19460 19456 19424 19 346 19283 19258 19232 19140 19123 19088 17926 17925 17924 17421 17420 17419 1505 4 15053 15052 14854 14676 14458 14457 14439 14343 14342 14340 14336 14267 14189 13899 13880 10021 10016 10014 10012 10011 10000 9999 9992 9991 9990 9989 9988 99 86 9979 9978 9977 9976 9973 9972 9970 9962 9961 9960 9959 9957 10293
root@server [~]# netstat -n | grep :80 | wc -l
14
We are using FreeBsd with Cpanel.
Some one has upload some scripts,they are running and attacking
to other systems.
last pid: 64017; load averages: 59.59, 60.75, 63.04 up 19+22:52:28 12:03:45
457 processes: 61 running, 315 sleeping, 81 zombie
CPU states: 52.4% user, 0.0% nice, 47.6% system, 0.0% interrupt, 0.0% idle
Mem: 465M Active, 212M Inact, 236M Wired, 22M Cache, 111M Buf, 62M Free
Swap: 2048M Total, 458M Used, 1590M Free, 22% Inuse
PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND
3282 root 128 0 37536K 30520K RUN 3:49 4.79% 4.79% perl
62953 root 128 0 30284K 25248K RUN 0:05 1.90% 1.90% perl
49249 root 128 0 33720K 28876K RUN 0:46 1.86% 1.86% perl
2981 root 128 0 40928K 30724K RUN 3:56 1.56% 1.56% perl
76809 nobody 127 0 4148K 2080K RUN 13:52 1.42% 1.42% perl5.8.8
19633 nobody 127 0 4148K 2128K RUN 2:34 1.42% 1.42% perl5.8.8
57451 nobody 126 0 4148K 2072K RUN 39:24 1.22% 1.22% perl5.8.8
76599 nobody 126 0 4148K 2080K RUN 13:53 1.22% 1.22% perl5.8.8
76966 nobody 126 0 4148K 2080K RUN 14:01 1.17% 1.17% perl5.8.8
60286 nobody 126 0 4148K 2072K RUN 38:42 1.12% 1.12% perl5.8.8
77488 nobody 126 0 4148K 2080K RUN 13:48 1.12% 1.12% perl5.8.8
77697 nobody 126 0 4148K 2080K RUN 13:47 1.12% 1.12% perl5.8.8
56573 nobody 126 0 4148K 2096K RUN 39:55 1.07% 1.07% perl5.8.8
58126 nobody 126 0 4148K 2072K RUN 39:11 1.07% 1.07% perl5.8.8
76513 nobody 126 0 4148K 2080K RUN 13:58 1.07% 1.07% perl5.8.8
76807 nobody 126 0 4148K 2080K RUN 13:57 1.07% 1.07% perl5.
I can't remember the name of the utility that lets you watch what a process is doing. You call it on a PID and you can see all the memory allocations, file IO, library loading, etc. that the process is doing as it happens. Anyone know what I'm thinking of?
View 2 Replies View RelatedHow can see wich vps used more server resource in openvz/hypervm.
View 3 Replies View Related