I am using Apache 2.4 and Jboss 7.1 on Windows server 2012 server. requirement is to have SSL offload in place for communication between Apache to Jboss. Apache will be secured to handle client requests from Apache onwards all servers in trusted zone hence there is offload requirement.
View 6 RepliesI'm looking for a way to get a little more mileage out of Apache + PHP environment without losing Apache capabilities. In shared hosting environments, losing features such as .htaccess and a real mod_rewrite are not even on the table. I'm also not willing to accept the performance hit and connection issues that are inherent with FastCGI, so that means mod_php.
In this particular situation, there are two busy sites, which are the problem.
These are a few ideas I've been thinking about.
1. mod_proxy + nginx: mod_proxy sends static content requests to nginx. This requires two sets of vhost files to be maintained.
2. mod_cache: Caching common static content such as page graphics .css, .js, etc.
3. squid
If you've been down 2 or more of these roads, I could benefit from your experience.
I want to install following S/W on CentOS --->
a. Apache 2.2.9 with SSL
b. JBoss 4.2.3
c. JDK 5.0 update 16
d. Postgres 8.2.10
Are they work properly on the CentOS server?
I have following components configured.
LoadBalancer, Apache and SSL enabled JBoss.
Lodbalancer URL ....
Apache URL ...
Jboss URL (SSL) ...
When the request comes to Loadbalancer, it is forwarding the request fine to apache.
But from apache I am not able to forward the request to Jboss(SSL)
I am using below settings on httpd.conf file of apache but url is getting changed to [URL] .... from [URL] ...
RewriteEngine On
RewriteCond %{HTTPS} off
RewriteRule (.*) https://servername:8443/EPC [R,L]
I still want the generic name (emsprod.com) to be displayed on url instead of server name.
How I can successfully forward the request to Jboss when I access LB url.
Environment(home server/learning):
-1 Public IP
-Host Windows Server 2008 R2 AD/DNS/Hyper-V (server0)
+ VM Windows Server 2008 R2 Exchange 2010/IIS (server1)
+ VM Ubuntu server 13.11 Apache 2.4.6 with virtual hosts (server2)
+ VM Windows Server 2008 R2 Blackberry Enterprise Server running on a Jboss webserver (server3)
-All port 80,443 requests points Ubuntu server 13.11 (server2)
Within Apache 2.4.6 I have virtualhost where the setup are as followed
SomeWebsite:80
SomeOtherWebsite:80
Mail.server1.com:443 (internet <---> server2 reverse proxy:443 +CERT <---> 443+CERT server1)
Bes.dnsname.com:443 (internet <---> server2 reverse proxy:443 +CERT <---> 443+CERT server3)
The problem:
For learning purpose I am configuring a blackberry enterprise server(bes) on server3. It's a clean installation with only the needed applications to run a bes. Because I only have 1 public ip I am trying to reverse proxy this webservice two like server1. The bes webservice is configured to accept connections on port 443. So my first web.conf setup was similar to the setup I used for server1 but I noticed that the webpage was displayed but I couldn't interact with the page because it was a java application. So digging deeper into this i found that the webpage that bes provided me to use isn't the real application but more like a iframe setup.
Example:
BES Console address: https://server3.com/webconsole/login
Real address: https://server3.com/websconsole/app
Unfortunately after finding this and editing my web.conf to proxypass reverse to this real address I encountered a other problem. The bes webconsole works with session is and parameters
Example:
https://bes.server3.com/webconsole/app;jsessionid=2C10DDA521DB8408479AAD8F34255C7F? component=login.goToChangeLanguagePageLink&consoleSId=&page=Login&service=direct&session=T
Current httpd.conf for server3:
<VirtualHost *:80>
DocumentRoot /var/www/bes.server3.com
ServerName bes.server3.com
<Directory "/var/www/bes.server3.com">
allow from all
Options +Indexes
</Directory>
[code]....
I am tried to integrate Apache HTTP server and JBoss app server 7 with mod_jk module plugin in Apache.I have two instances of Jboss running and Apache server sends requests to them.I have added following code in "httpd.conf" of Apache:
Code:
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_http_module modules/mod_proxy_http.so
JkWorkersFile "D:/Program Files/Apache Group/Apache2/conf/workers.properties"
JkShmFile "D:/Program Files/Apache Group/Apache2/logs/mod_jk.shm"
JkLogFile "D:/Program Files/Apache Group/Apache2/logs/mod_jk.log"
[Code] ....
But, though I have configured this way, when my worker1 goes down,Apache is not sending requests to worker2 and I get "Service Temporarily Unavailable" message.
This is the first time I am using Windows 2008. I am used to Win xp but IIS in Windows 2008 looks like the default server and it always grabs the 80 port and if I remove it, Web Publishing and http services won't be available
Any body familar with Jboss on Windows 2008?
When I open my site in a browser and I point the URL to specifically // ipaddress / location A it's all good. (Apache Server)..My problem is, if you open the site in a browser with just the IP address alone it goes there for a second and then automaticlly goes to and opens the other site in location // ipaddress / location B.
However, what I need it to do, I think, is edit the apache conf file to make it open location A as the default. What do I need to do in the apache (httpd-conf) to fix that? For that matter is that the right file to edit?
Im using AJAX on my site and i need to access a seperate server instance on a different port. AJAX wont allow me to do that so i want to use Apache as a proxy but only for one page.
View 4 Replies View RelatedI been using plesk, and cpanel so this is the first time I have Webmin for my CentOS.
After some googling and reading, i able to install apache, mysqld and vsftpd (for some reason, my host (hivelocity) didnt install these. So this is my setup.
a.com: in godaddy, i add nameserver host as ns1.a.com and ns2.a.com and change the dns to point to that
b.com: in godday, point dns to ns1.a.com and ns2.a.com
BIND DNS Server
========================
I create two master zone for a.com and b.com
a.com
Code:
$ttl 38400
a.com. IN SOA server.a.com. abc.yahoo.com. (
1226206691
10800
3600
604800
38400 )
a.com. IN A 1.2.3.4
server.a.com. IN A 1.2.3.4
a.com. IN NS server.a.com.
mail.a.com. IN A 1.2.3.4
ftp.a.com. IN CNAME a.com.
www.a.com. IN CNAME a.com.
a.com. IN MX 10 mail.a.com.
b.com
Code:
$ttl 38400
b.com. IN SOA server.a.com. abc.yahoo.com. (
1226206691
10800
3600
604800
38400 )
b.com. IN A 1.2.3.4
server.a.com. IN A 1.2.3.4
b.com. IN NS server.a.com.
mail.b.com. IN A 1.2.3.4
ftp.b.com. IN CNAME b.com.
www.b.com. IN CNAME b.com.
b.com. IN MX 10 mail.b.com.
APACHE
========================
I created 2 virtual servers for a.com and b.com
/home/sites/a.com/html
/home/sites/b.com/html
I create an index.php in a.com/html with content: "a.com YEAH"
I create an index.php in b.com/html with content: "b.com YEAH"
After wait for dns to propogated,
when i try to go to a.com, content "a.com YEAH" shows up.
But when goto b.com, content "a.com YEAH" shows up? Why?
Also, when goto ns1.a.com, content "a.com YEAH" is there.
I also has problem with vsftpd but let fix that later.
I have a fresh Ubuntu 14.04 install (desktop). I installed Apache, php and mysql from APT and updated everything.I tried to setup a virtual host using these directions: URL...I followed them to the letter:
o I created a folder /var/www/mydomain.local/public_html
o I copied the 000-default.conf in sites available and modified it
o I added mydomain.local to my hosts file (with IP of 127.0.0.1
o I used a2ensite to enable the host
o I used service apache2 reload
When I went to mydomain.local in firefox, it took me to the default host main page.I tried a restart of the service and even a reboot of the computer. No change.On a theory, I used a2dissite to remote 000-default from the enabled site list and reloaded the service. I got the home page for mydomain.local after that.
I created a named host called localhost and reloaded the apache. When I went to http://localhost it took me to the mydomain.local homepage. Rebooted the computer. Now, localhost gives me the apache default home page and mydomain.local does not work at all (I get a server not found).
I get the feeling that there is an apache configuration item I am missing but I cannot find it.
I am struggling with this all the day, no answer i found here as well. how to setup proper a subdomain i need. My Apache config has 2 domains configured (on same IP), for the domain2.com i need to setup a sub-domain. Here is what i have so far, but the subdomain keeps redirecting me to domain2.com (main site).
View 2 Replies View Relatedi have setup everything before using ssl without issue for using https url.Now I'm having issues for Apache 2.4.9.
In url https://tomysite.com i get
Not Found
URL....how to setup apache so files are downloadable from it. I guess I should also be using SSL.
View 1 Replies View RelatedWhere can I get examples to create login ID and password with changing of password function for valid user to access apache web server?
View 3 Replies View RelatedStarting linux for hosting (HOW TO SETUP DNS< APACHE AND SENDMAIL) in RH 9
hi does anyone know to setup these or could dirct me to step by step tutorials please.
I installed apache, mysql, php on my windows vista laptop, and want to test http downloading. This means when selecting a file (for example, contact.php) from a page, and then click download, it will be downloaded to my desktop.
Do we need to install any other softwares to do that?
Does anyone know how to install the Frontpage Server Extensions on an Apache server which is running on a Windows box? I've searched around including on Microsoft's site, but I was only able to find info on how to configure for Apache running on unix/linux.
View 0 Replies View RelatedI don't have any SMTP server
Its a dedicated unmanaged server that has windows 2003 and apache running. I heard you need IIS to enable SMTP on a Windows machine but I don't want to run IIS because I feel Apache is better.
I am migrating to apache httpd 2.4 on windows xp. The current server currently has exe programs that execute as cgi programs. When I try to use one of these links, apache just servers the programs as files for download. How do I configure my httpd.conf to run these instead of download them?
View 1 Replies View RelatedI want to setup a password for a website running on Ubuntu server, and find Apache can be used. It is implemented by config httpd.conf file and .htaccess file.
So I want to ask:
1. In this case, the password is setup for a path on the server configured in httpd.conf file. Like in the following example:
Code: <Directory "/var/www/html/MySite">
The password is setup for the path to Mysite,right?
2. If my content of website is not stored under /var/www folder, I cannot use this way to setup a password for website, right? May use PHP instead?
somebody know is possible on some way route traffic before come to web server (apache or lighttpd)?
I want to setup lighttpd on port 80 and apache on port 81 and I want visitors to go direct to apache or lighttpd without url:81 and that must work on this way if somebody visiting url1.domain.com that go to lighttpd on port 80 and if somebody visiting url2.domain.com that go to apache on port 81 and something must route it before lighttpd and apache (and get/post must work), is this possible on some way?
I know that lighttpd and apache can do it but I don`t need it on that way!
I am trying to set up log rotation on my Apache Server on Windows 2008 using the rotatelogs.exe executable. I believe I am having issues because my directory path has spaces.
From my understanding, a full path is needed for the ErrorLog but not for the CustomLog
ErrorLog "|"C:/Program Files (x86)/Apache Software Foundation/Apache2/bin/rotatelogs.exe" "C:/Program Files (x86)/Apache Software Foundation/Apache2/logs/Error/Error_%Y-%M-%D.log" 86400"
CustomLog "|bin/rotatelogs.exe logs/Access/Access_%Y-%M-%D.log 86400" common
The error that I get is:
C:Program Files (x86)Apache Software FoundationApache2.2bin>httpd.exe -k start
The system cannot find the path specified.
I had setup an apache home server. here the 80, 8080 ports are blocked . So I made my apache to listen to 4040 port. but the problem now is ,i use cloudflare service to point my domains to my server. now its showing error when i give my ip because the port is not 80. i tried putting dns host point to xxx.xx.xxx.xx:4040 in cloudflare but shows invalid ip ...
View 1 Replies View RelatedHow can I setup my control panel to update the Apache config file
View 4 Replies View RelatedMy system consist of Ubuntu 14.04 server running LAMP. I am running Apache 2. On the same machine I am running Shiny server and running my apps through port 4949.
[URL] ....
I also am running an additional Shiny server copy on a virtual box through port 3838. All is running very good. I have an html web page running on Apache 2. I can view it and all my apps running on both Shiny servers from any place on the web.
My concern, however is security. I have port 3838, 4949, and 80 open. How can I set up Apache to run as a reverse proxy for my both of my Shiny servers (ports 4949, and 3838) and also continue to host my web page securely.
I have also attempted to set up a self-signed certificate using the following procedure but it is not working. I used the following instructions and followed them verbatim.
[URL] ....
How to set up a reverse proxy for my Shiny servers?
I am looking for setup a gateway (reverse proxy I guess?), specifically how to configure Apache to point to different webservers depending on domain name.
I currently have a single webserver running multiple virtual domains all accessible via a single external IP address.
I would like to break this into 2 servers each running multiple virtual domains accessible via gateway with a singe external IP address.
As an example, a single internet IP address points to port 80 on the gateway machine. The gateway machine will determine if its example1.com, example2.com, example3.com or example4.com. If its example1.com or example2.com it will direct internally to webserver1 and if its example3.com or example4.com it will direct internally to webserver2.
Webserver1 and webserver2 each host different websites via virtual hosts.
Is this possible and if so, what is the correct configuration of the gateway machine. I currently have installed apache2 with mod_proxy enabled, but I am struggling with configuring it properly.
I am trying to setup dynamic content configuration in apache 2.2 httpd conf. Here is the configuration and couple test cases:
CONF:
<FilesMatch ".(js|css|gif|jpg|jpeg|png)$">
Header set Cache-Control "no-cache, no-store, max-age=0, must-revalidate"
</FilesMatch>
TEST 1:
Without <FilesMatch> directive, the headers are set to all requested content as it should. This includes content served from apache server and content from a separate application server.
TEST 2:
If I use the above configuration example, I can see that static content comes with correct headers only
I'm using Vertrigo 2.30 which in turn uses Apache 2.2.26 as part of its stack I am trying to set up virutal host on Windows 7 home premium.in httpd.conf I have uncommented Include conf/extra/httpd-vhosts.conf in C:WindowsSystem32driversetchosts I have
127.0.0.1 localhost
127.0.0.1 localhost
198.0.65.217 talknowradio.com # www
198.0.65.217 paranormalpalaceradio.comcastbiz.net # vhost
in C:Program Files (x86)VertrigoServApacheconfvertrigo.conf I have
<Directory "C:Program Files (x86)VertrigoServwww">
Options Indexes FollowSymLinks Includes
AllowOverride All
Order allow,deny
Allow from All
</Directory>
[code]...
my primary domain still works perfectly but the virtual host I created keeps loading 403 error page I have checked the Apache error log and I found two instanses of
[Tue Dec 31 08:33:29 2013] [error] [client 198.0.65.217] script 'C:/Program Files (x86)/VertrigoServ/www/vhost/modules.php' not found or unable to stat, referer: URL....I have no clue where or why its reading a module.php file granted I do use Nuke Evolution on my primary site but the only page in the virual host folder is a index.html I have checked and double checked.
I am 3 days new to figuring out how to get Perl scripts to run on my Windows XP box. I downloaded and installed the Apache installation file "httpd-2.0.65-win32-x86-openssl-0.9.8y.msi" and the "strawberry-perl-5.18.2.1-32bit.msi" from the perl.org site in hopes that I could get a feedback form to work for a web site that I am working on.
Out of the many pages that I have viewed online of how to configure the Apache Server, nothing has given any favorable results with their explanations.
My last attempt was [URL] ..... where I could not get the example to work. I did the changes to the Apache file "Edit the Apache httpd.conf Configuration File" fairly easily but I must be having problems with the test.pl because I can't get it to work.
I used a different version of Perl (Strawbery from perl.org because it installed without giving me an error pop up after installation) and after copy pasting the script, in an attempt to get it working, I ended up changing it in hopes that I could get it working, shown below.
#!/strawberry/bin/perl.exe
print "Content-type: text/html; charset=iso-8859-1
";
print "<phtml>";
print "<body>";
print "Test Page";
print "</body>";
print "</html>";
This is what the site says to create the program with:
#!/perl/bin/perl
print "Content-type: text/html; charset=iso-8859-1
";
print "<phtml>";
print "<body>";
print "Test Page";
print "</body>";
print "</html>";
where I assumed that "#!" meant the "C:" drive and substituted the first "/perl" with the folder the Strawbery Perl had installed itself to and left the second "/perl" in the first line thinking that it was referring to the executable in the "C:strawberryperlbin" folder.
This is the error I get when trying to get the script to run when typing "localhost/test.pl" in the address bar.
"Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
........"
Know how I can change the title of this post to read "Configuring Apache HTTP Server 2.0 to run Perl in Windows"?
I am trying to setup a subdomain and/or virtual host to redirect to a specific port and path. I have setup my server with DDYNS through my domain name registar. Through the ddyns client I have set it to assign a subdomain of "outside.name.com" so that my server will have a easy name to get to instead of a dynamic ip address.
I have also setup on my registrars host records another subdomain of "inside.name.com" with a static IP address for internet network accessing to my server.My problem is that I have a service/program on my server that I need access to both internally and externally and this service can only be access through a port of 32400 and HTTP address of /web. (e.g. outside.name.com:32400/web or inside.name.com:32400/web)...
Is there a way that I can create a VirtualHost or Subdomain of "service.*.name.com" that redirects them to ":32400/web" of the hostname they're on? (e.g. service.outside.name.com automatically forwards or proxies--to keep it pretty--to service.outside.name.com:32400/web)