Dnsreport Says Stealth Nameservers

Apr 30, 2007

I did an OS reload and I decided to setup my own nameservers. Previously I have my sites using everydns.net

Now I added the two nameservers I created to my Godaddy account (the nameservers that point to everydns are still there,) and they are updated.
I added the A records inside my zone to point to the ip address.
Dns report shows theseerrors:

AIL: You have one or more missing (stealth) nameservers. The followingnameserver(s) are listed (at your nameservers) as nameservers for yourdomain, but are not listed at the parent nameservers (therefore, theymay or may not get used, depending on whether your DNS servers returnthem in the authority section for other reques5.4.1). You need to make sure that these stealth nameservers areworking; if they are not responding, you may have serious problems! TheDNS Report will not query these servers, so you need to be very carefulthat they are working properly.

gogol.ithaki.net.
schubert.ithaki.net.
This islisted as an ERROR because there are some cases where nasty problemscan occur (if the TTLs vary from the NS records at the root servers andthe NS records point to your own domain, for example).
Your DNS servers leak stealth information in non-NS requests:

Stealth nameservers are leaked [gogol.ithaki.net.]!
Stealth nameservers are leaked [schubert.ithaki.net.]!

Thiscan cause some serious problems (especially if there is a TTLdiscrepancy). If you must have stealth NS records (NS records listed atthe authoritative DNS servers, but not the parent DNS servers), youshould make sure that your DNS server does not leak the stealth NSrecords in response to other queries.

ERROR: I could not complete a connection to any of your mailservers!

server.ithaki.net: Timed out [Last data sent: [Did not connect]]

Ifthis is a timeout problem, note that the DNS report only waits about 40seconds for responses, so your mail *may* work fine in this case butyou will need to use testing tools specifically designed for suchsituations to be certain.

View 2 Replies


ADVERTISEMENT

Missing Stealth Nameservers

May 11, 2006

I ran my domain name through a dns test site and it came up with this message. Does anyone know what it means, is my site in trouble?

WARNING: Your nameservers do not include any corresponding A records when asked for your NS records. They probably are not returning the A records when asked, which can prevent some other DNS servers from contacting your DNS servers. They should do this if they are authoritative for those A records.

FAIL: You have one or more missing (stealth) nameservers. The following nameserver(s) are listed (at your nameservers) as nameservers for your domain, but are not listed at the the parent nameservers (therefore, they may or may not get used, depending on whether your DNS servers return them in the authority section for other requests, per RFC2181 5.4.1). You need to make sure that these stealth nameservers are working; if they are not responding, you may have serious problems! The DNS Report will not query these servers, so you need to be very careful that they are working properly

View 9 Replies View Related

Alternatives To DNSReport (DNSReport Now Charging Users For Dns Lookups)

May 17, 2007

Now that DNSReport is forcing logins/charging users for accounts does anyone know of any alternatives?

I can't seem to find anything remotely decent throughout my search engine hunts!

View 14 Replies View Related

Apache :: Stealth Forwarding Iframe Does Not Work Properly

Oct 31, 2014

I have a website on domain x like https://example.com. One of our customers want to use their own domain name in the address bar and redirect to our web application. In the control panel of the customers website, we can forward the site to our domain without issues (stealth forwarding). After that, we are able to see the site and navigate to some options. But there are some issues/limitations. I cannot open some links, or click on tabs. The login feature works for chrome but not for internet explorer. Is this due the jump of http to https within an iframe? Or is it related to CORS? I have a Windows 2008 R2 server with Apache, which is the frond-end for the tomcat instances. "Tomcat Apache" serves our Java-based web application (mod_jk binded) ...

View 2 Replies View Related

Dnsreport

Aug 3, 2007

I have a vps, I setup the nameservers last night I think. But here is the dns report for my domain name, although I just changed the domain to propigate from the old host to my vps using the name servers.

I want to know if the faluires are to do with the domain not being propageted completly to the new vps, or if they are a different problem.

[url]

View 3 Replies View Related

Dnsreport

Feb 14, 2007

Ran a dnsreport on my domain, everything is ok except on thing:

Mail server host name in greeting

WARNING: One or more of your mailservers is claiming to be a host other than what it really is (the SMTP greeting should be a 3-digit code, followed by a space or a dash, then the host name). If your mailserver sends out E-mail using this domain in its EHLO or HELO, your E-mail might get blocked by anti-spam software. This is also a technical violation of RFC821 4.3 (and RFC2821 4.3.1). Note that the hostname given in the SMTP greeting should have an A record pointing back to the same server. Note that this one test may use a cached DNS record. domainconcern.com claims to be host server.host.com [but that host is at xxx.xxx.67.2 (may be cached), not xxx.xxx.67.3].

Is this normal? I mean, the domain is using a dedicated IP anyway.

View 1 Replies View Related

Dnsreport Goes Pay Only - Alternatives?

Aug 30, 2007

One of my favorite web tools, dnsreport dot com, has gone pay only apparently

Is there any other service that is as close to advanced with the nice breakdown it does? Perhaps some tool I can install on one of my own servers?

I know the super skilled will says oh just run this, that and the other command line tool for the same info but I really liked the way they did it and how it explained the details.

View 14 Replies View Related

Will The Nameservers Work If The Nameservers Are Pointed To A Parking Page

May 26, 2008

Will the nameservers work if the nameservers are pointed to a parking page?
For example:

I need to change my nameservers to ns1.mywebhost.com and ns2.mywebhost.com

(nameservers are made up)

These nameservers are from my web hosting service provider. When I visit the nameservers, it shows up a parking page from a domain parking service (let's say NameDrive parking page)

Will the nameservers function correctly and will my websites work? I have this question because usually the nameservers that I use, they always point to a CP page or something like that rather than a parking page.

View 7 Replies View Related

My Server Fail On DNSReport.com's "Mail" Test

Jan 16, 2007

I run a DNSReport.com test for my domain name and it failed on "Mail" section with this error message:

HTML Code:
ERROR: I could not complete a connection to any of your mailservers!

my-domain.com: Timed out [Last data sent: RCPT TO: ]

If this is a timeout problem, note that the DNS report only waits about 40 seconds for responses, so your mail *may* work fine in this case but you will need to use testing tools specifically designed for such situations to be certain.
also on DNSReport.com mail test, got this error message:

HTML Code:
my-domain.com. - xxx.xxx.xxx.xxx [Could not connect: Could not receive data: Operation timed out.]

[Note that if your mailserver takes over 30 seconds to respond, our test will timeout, even though real mailservers will wait longer] what makes my server failed on this test?

View 2 Replies View Related

Nameservers

Oct 29, 2008

Will domains still function if they have differing nameservers at the registry from what they do on the server side? i.e. domain1.com pointing to ns1/2.example.com at the registry but on the server the DNS zone has it as ns1/2.example2.com, baring in mind both sets of nameservers are pointing at the same server.

View 2 Replies View Related

Nameservers...what Do I Do Next?

Jul 22, 2007

I have purchased a reseller account from www.reseller.net (not real names) They provide me with ns1.reseller.net and ns2.reseller.net, as well as the two associated ip addresses. They tell me to use these 2 ip addresses to set up my own custom nameservers.

I want my own nameservers - ns1.mydomain.com and ns2.mydomain.com. Tech support at www.reseller.net tells me thay cannot help me. They tell me to go to the company where I purchased and manage the domain name www.mydomain.com.

I do, and find the control panel page where I -CREATE NAME SERVER-. This I do, and I use the above mentioned ip addresses. This seems to work. When I go back to this control panel page the next day, the entries I made are still there. Yet, I cannot "ping" my nameservers.

Now what? I have tried "google-ing" and not being a super-tech, I get lost. It appears that I must make some changes in my WHM, (I have a WHM...), but I have no access to any "Server" settings.

I have another reseller account with a totally different company, and when I asked them to set up custom nameservers, they just "did it" for me. Again, the hosting company was not related to the domain registering company.

View 5 Replies View Related

Best Way To Set Up My Nameservers

Dec 7, 2007

I am experimenting with setting up my first unmanaged dedicated server.

I have directadmin as a cp.

I have 5 separate IP's available to me.

I went to my domain registrar and set up host as ns1.mydomain.com and ns2.mydomain.com using my first two IP's that are available.

My question now is what is the best way to use my three remaining IP's? Do I set them up as completely different domain nameservers ie. ns1.otherdomain.com etc.? Out of those three, I thought you need two IP's per nameserver domain? Is that wrong thinking?

I don't want any relationship shown in a whois dns info between the ips.

View 9 Replies View Related

DNS - Nameservers

Apr 11, 2009

How to configure DNS(nameservers) without cP/WHM and any other Control Panel. I can use your only SSH for it.

OS = CentOS5
DNS Server: Bind

View 3 Replies View Related

Vps And Nameservers

Apr 20, 2009

If i create a vps using openvz and use a new ip for that vps e.x:
123.456.789.0

What nameservers i must use to point my domain to that vps?

NS1 <--- 123.456.789.0

NS2 <--- ?

View 3 Replies View Related

Some VPS With Same Nameservers

May 15, 2009

how can i run some VPS(diferent ip's) in a DedicatedServer with same nameserver.

example:
all sites in VPS1 using ip: 10.10.10.1
all sites in VPS2 using ip: 10.10.10.2
all sites in VPS3 using ip: 10.10.10.3
all in a DedicatedServer
now i want using ns1.dns.com for all sites.
xen/openvz on Centos/RHLE used.

View 4 Replies View Related

Nameservers..

Jun 1, 2007

I recently bourght a dedicated server, and found out I don't know whta my name servers are, the company gave me there nameservers, I was fine, but when I input my name servers in namecheap or godaddy ect, I get this:

Quote:

There is some problem updating the NameServers
The problem is: nRRPResponseCode 541

View 14 Replies View Related

Nameservers Set Up In WHM

Aug 7, 2007

I just have a question on setting up Nameservers in WHM. Is it necessary to add an "A" entry to the name servers, and if so, do I need to do so on both nameservers, or just the first one?

ns1.mysite.com
ns2.mysite.com

What's the reason/ necessarily for adding a A entry to a nameserver, and can it be skipped?

View 5 Replies View Related

Nameservers Forward?

Jan 22, 2008

hello

i really rely on your expertise guys please help me!

a cpanel server A has some domains on host 1
a new cpanel server B is set ready for migration on host B.

the greek registrar i use,
by accident (As they say) switched ips for my nameservers from A to B and the migration has not been done!!!!

can i set up a record or something on server B to forward all traffic back to server A ???????

Sorry i'm not a network expert. That's why i'm here

thanks

simos

View 1 Replies View Related

Forwarding To IP Rather Than Nameservers?

Feb 21, 2007

I have a domain at Enom and I have a use for it which would require it being assigned an IP address rather than nameservers in order to reach the server it would be hosted on - I have 2 questions please:-

Would doing it this way bring any penalties in search engine ranking, PR or any other problems?

How would it best be done at Enom?

View 3 Replies View Related

Register Your Nameservers

Dec 6, 2006

i have started moving domains from Cpanel/whm server to my HSphere server that uses a new nameserver, but have come up against problem with the new NameServer.

When moving .biz .info i get error about nameserver not being resgistered, after doing some seaching it appears that some domain resgistrars (in this case 123reg) are starting to enforce a security feature whereby All registrars need the name server registered before you can point any domain name to the name server.

Diggin further i found this at stargate.com which where i have my HSphere service domain:

1.

Registering a Child Name Server as mentioned above is just the first step. The Child Name Server needs to be registered at the Registry to only serve as a non-authoritative Record should your Child Name Server not be resolvable in some extreme condition.

This Name Server would start working only after you have added an Address (A) Record or Canonical (CNAME) Record for this Name Server within the Zone for the domain name (of this Child Name Server) at your own DNS Server, thus binding the NS to the IP Address.

Examples

i. If you are running your own DNS Servers then you would need to add a Zone for the domain name your-domain-name.com and create an A Record like

ns1.your-domain-name.com. 38400 IN A 111.222.333.444

ii. If you wish to simply point your Name Servers to another Name Servers, you may add a CNAME Record to those (while ensuring that those Name Servers have an A Record within the Zone created for your Name Servers as well).

ns1.your-domain-name.com. 38400 IN CNAME ns1.service-provider.com

Also at ns1.service-provider.com there should be an Zone for your-domain-name.com with an A Record for ns1.your-domain-name.com, making it authoritative for resolving your-domain-name.com.

In most cases your ISP would have already created the above for you and you need not bother about the same.

My service domain, and one i am using for nameservers, HSphere dns settings looks like

Name TTL Class Type Data Action
cp.mydomain.net 86400 IN A 85.264.15.83 Click to delete
ns1.mydomain.net 86400 IN A 85.264.15.84 Click to delete
ns2.mydomain.net 86400 IN A 85.264.15.85 Click to delete
web.mydomain.net 86400 IN A 85.264.15.86 Click to delete
mail.mydomain.net 86400 IN A 85.264.15.87 Click to delete
mysql.mydomain.net 86400 IN A 85.264.15.88 Click to delete

So from what i tell i have furfilled critria?

I have to say i am a little confused over this!

I am thinking that maybe i have to make some changes at stargate.com or maybe get my co-lo provider to make changes?

View 5 Replies View Related

Which Domains Used By Which Nameservers?

Jan 19, 2008

I was looking for a tool that would allow me to enter a Nameserver, and it would then return the Domains that use that Nameserver in its DNS.

I see domaintools.com has a tool that does it, but it costs. Is there a free one available?

View 5 Replies View Related

Nameservers Are Not Reachable

Dec 16, 2006

I have created 2 nameservers and assigned unique IPs to them and I have my domain dhingana.org using them. Everything was fine until today when suddenly I cannot reach dhingana.org.

I restarted BIND, Apache and even my server but still the same issue. I checked that Apache is still running.

My DNS reports for dhingana.org says:

A timeout occurred getting the NS records from your nameservers! None of your nameservers responded fast enough. They are probably down or unreachable. I can't continue since your nameservers aren't responding. If you have a Watchguard Firebox, it's due to a bug in their DNS Proxy, which must be disabled (31 Jul 2006 UPDATE: several years after being informed of this, there is a rumor that there is a fix that allows the Watchguard DNS proxy to work).

View 5 Replies View Related

How To Add SOA Records For New Nameservers?

Aug 1, 2006

I have added a new ip for my nameserver3 and now it is pingable... But when I try to point a domain it says something like "check SOA record for your nameserver3" etc...

How can I add SOA records for this new nameserver via whm or?

View 2 Replies View Related

Setting Up Your Own Nameservers

Sep 8, 2006

Just got a new dedicated box (Fedora 5/CPanel/WHM). I didn't realize I had to set up my own nameservers with it. Definitely not a subject I am well versed in. Anyone know where I can find out how to get started?

View 9 Replies View Related

Configure Two Nameservers?

Feb 16, 2008

I have a question on how to set up (clone) two nameservers.

I have two VPS' with two IPs that are totaly independent of each other. Both running ispCP with Apache2, mail, ftp, mysql, AND bind9 as DNS managment.

So. I want these two server to be as independent as they are, BUT they should share NameServers with each other.

Something like this:

host1:
ns1.domain.com = host1
ns2.domain.com = host2

host2:
ns1.domain.com = host1 (or host2?? = inverted)
ns2.domain.com = host2 (or host1?? = inverted)

A lot of domains are running more then one NameServer, but I could not find any tutorial on how to "clone" the NS from one to an other. Is it enough to just add some kind of "transfer to IP setting" in bind, or do I have to have scripts that download settings and files from one server to an other regularly?

View 2 Replies View Related

Webmin & Nameservers

Nov 18, 2008

Webmin ...

View 2 Replies View Related

Configuring DNS And Nameservers

Jan 22, 2007

I got dedicated server with plesk 7.8 installed on it. Can anybody tell me what to do next to add new website.

I have ip through which i can login to plesk control panel.

I want to know how can i create name servers which i will use for my domains like ns1.abc.com ns2.abc.com.

What setting i need to create by use DNS button in control panel to run my sites properly.

View 1 Replies View Related

Nameservers Change

Apr 13, 2008

i have changed the nameservers in one of my domains and now on it is loading from new server but only when i type mydomain.com.. When i type www.mydomain.com my site stills loading for the old server...it have passed 12 hours from the time i made the change...it is something else i must do to have my site also available from the new server when someones type www.mydomain.com ?

View 3 Replies View Related

WHM Custom Nameservers

Jun 24, 2009

We just got a dedicated server, my first time messing with anything dedicated though I've had WHM before. I have 4 domains I'd like to setup to point to this. But I'd prefer our company URL to host the name servers. Domains are registered through enom who will allow me to setup the name servers.

I'm trying to use the "Nameserver IPs" section in WHM to setup the name servers but it just sits and "works" but never actually finishes. Does my company URL need to be pointing to the server before doing this?

View 2 Replies View Related

Possible To Have More Than 4 Nameservers In Cpanel

Apr 23, 2009

Am just wondering is it possible to have more than 4 nameservers in cpanel.

I know in server configuration you can add the 4. Is it possible to add more?

View 4 Replies View Related

2 Ips - Nameservers IP Addresses

Sep 7, 2007

Recently we add a new server,so we register ns3 and ns4 to 2 new ips,of the new server.

Then,in the old server,we set ns3 and ns4 as A records to the new ips.

Doing a dns reverse to ns3 and ns4 they report the correct ips. BUT When make a dns reverse for the nameservers ips,it makes a loop.....

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved