Physical Path
Jan 13, 2007how can i find out my site physical path
i tried following but blank page
[url]
how can i find out my site physical path
i tried following but blank page
[url]
what is the physical path of yahoo hosting
i tried this
PHP Code:
<?echo $_SERVER['PATH_TRANSLATED'];?>
but bank page
I just ordered a server from serverbeach that should have come with 2 GB but I see that this one comes with 8 GB
Unfortunately, I seem to be missing 7 GB of ram.
Installed Physical Memory: 8 GB
Total Physical Memory: 1 GB
Windows 2008 Server Web 32-bit
Now, being a 32-bit system, I should see 3-4 GB of ram right?
Any idea why only 1 GB is available for the OS?
[url]
I have a VPS and it worked well, the problem is if I install huge database which is more than 2 gigs, the VPS will hang because it has no physical ram to handle it. My host told me the only way is to get a dedicated server for a db more than 2 gigs. Dedicated servers have physical ram to deal with such db's.
View 6 Replies View RelatedI had a 'VPSII' at 1and1 (Windows). The VPS II is advertised as having 256MB, and in Task Manager it would show physical memory as 450MB. When I first questioned this difference I was told the 450 included an 'allowance' for the OS - seemed reasonable.
I just upgraded to a VPSIII - which is advertised as having 512MB. Call me crazy, but I was expecting Task Manager to now report 706MB (450+256), but it only shows 550MB.
I called 1and1 and they said 'that's correct' - we give the smaller VPSs a 'boost' but not the VPSIII - WTF?
Is this anything like standard practice?
recently brought a dedicated server with fasthosts.
Currently my site has
Physical80.31% 84Mb Free (428Mb Total)
Virtual2.99% 1987Mb Free (2048Mb Total)
The physical memory has shot up, do I need to reduce it somehow?
I live near NYC, and it would be very convenient if I could have physical access to my colo'd server. I don't suppose there is anything in the $50/month range? If not, then I guess any affordable colocation on the East Coast?
View 5 Replies View RelatedI have number of question relevant to dedi. severs. I dont know to post them seperately or in single thread , sorry to mod for my negligence.
raid 1
or
If I have two drives ,and take daily backup on second drive
how much average small websites can hold a single machine=
quad xeon 2.3 , 4gb ram, 1 tb drive what you say?
how many websites you ever hosted on single machine?
is it wise to host large number of website on single powerful machine with external backup, or go for number of small dedis.
Is there any economical motherboard CPU which support 4 physical CPU?
View 6 Replies View RelatedPhysical hack of my server?
My server (cent OS4, plesk 8) was frozen for a day and the NOC had to reboot it, here is the mail I got from my host:
>Your server was frozen, with a kernel panic. Ensure that you check your logs closely to determine how this happened,
After looking at the message log here is the part of the log when the crash happened:
Is this really a kernel panic, I am not sure...
Dec 8 09:05:36 server kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Dec 8 09:05:37 server hal.hotplug[2701]: DEVPATH is not set
Dec 8 09:05:37 server hal.hotplug[2702]: DEVPATH is not set
Dec 8 09:05:42 server login(pam_unix)[2670]: bad username [ ]
Dec 8 09:05:42 server login[2670]: Authentication started for user
Dec 8 09:05:44 server login[2670]: FAILED LOGIN 1 FROM (null) FOR , Authentication failure
Dec 8 09:05:50 server login(pam_unix)[2670]: authentication failure; logname=LOGIN uid=0 euid=0 tty=tty1 ruser= rhost= user=root
Dec 8 09:05:50 server login[2670]: Authentication started for user root
Dec 8 09:05:53 server login[2670]: FAILED LOGIN 2 FROM (null) FOR root, Authentication failure
Dec 8 09:05:57 server login(pam_unix)[2671]: authentication failure; logname=LOGIN uid=0 euid=0 tty=tty2 ruser= rhost= user=root
Dec 8 09:05:57 server login[2671]: Authentication started for user root
Dec 8 09:05:59 server login[2671]: FAILED LOGIN 1 FROM (null) FOR root, Authentication failure
Dec 8 09:06:00 server shutdown: shutting down for system reboot
Dec 8 09:06:00 server init: Switching to runlevel: 6
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@
Dec 9 05:52:36 server syslogd 1.4.1: restart.
It looks to me like if someone has physically connected a keyboard and logged in at the NOC.
I use Iptable to restrict ssh access to my IP each time I connect remotly, so I dont' think a remote connection has been possible.
any idea about this line:
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@
I think it's just corupted data the was written when the server shutt down.
Also i didn't find any other signes of kernel panic in the logs
Looking at the httpd error log I found this lines before the crash:
[Sat Dec 08 00:44:40 2007] [error] [client 213.215.41.138] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind
[Sat Dec 08 00:44:40 2007] [error] [client 213.215.41.138] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind
apparently somone doing server scan. maybe the 2 events are correlated and the server freeze could have been a result of some buffer overflow attack, but i sould be finding some evidences of this on the apache logs?
What direction should I take to investigate a bit further on this server freeze?
We have a windows 2003 machine that is currently responding properly to all services that it's running (including IIS and FTP), however RDP connections just close right away and the server isn't responding when a local keyboard & monitor is plugged in.
The last thing that I want to do is pull the power out while it's on - any ideas?
I tried a remote shutdown, but the response is:
C:Users>shutdown /r /m HOSTNAME
HOSTNAME: The entered computer name is not valid or remote shutdown is not supported on the target computer. Check the name and then try again or contact your system administrator.(53)
I just built a new server using [url]and two Intel xeon 5345 clovertown processors.
When the server boots up the BIOS detects only 1 physical processor with 4 cores and also the OS detects the same.
Couple of things I already tried to solve the problem:
A. Upgraded the BIOS to the latest available release date of 05/30/07
B. I swapped the processors in the motherboard sockets to rule out that one of the processors was not working.
how to troubleshoot.
_______________________________________
Greetings:
Are there any calculators, white papers, or other guidelines that provide guidance for sizing a physical server to be used for openvz or Virtuozzo for Linux?
i.e. if you want to run “x” VPS nodes totaling “y” disk space needing “z” number of processes, etc. you will need “n” CPU’s of at least ____ Ghz with ____ RAM, and ____ hard drive space of which ________ should be reserved for the operating system and openvz system software
Also for openvz or Virtuozzo for Linux, which RAID provides the fastest performance without trading off too much for hard drive reliability?
I have a Windows 2003 server with 2GB ram running IIS and SQL 2005 express. I noticed that the server only uses around 1.2GB of its physical memory (been a few days) while page file usage seems high at 1.1GB.
SQL server has been allocated a maximum 1GB of memory while IIS has no limitations on memory usage.
Server doesn't really show any slowness at this point (not a lot of traffic). But to my understanding other than the proccesses that always use some virtual memory (around 400mb usually), page file should be only used when there is insufficient physical memory? So is there something wrong with my memory usage, 1.1GB on page file while there are still almost 50% available physical ram?
I'have a problem with my aps setup on sanbox.When i create on customer ccp when i click finish i have this error. I must only test.
Error: Instance of application with id 124 and version '1-4' can not be provided: There is no resource of class 'Shared hosting Apache' with provisioning attributes 'Web Cluster' in subscription with id 1.:There is no resource of class 'Physical hosting (IIS)' with provisioning attributes 'Web Cluster' in subscription with id 1..If i add the shared hosting apache resourse i get this error : There are no "apache" services that satisfy given attributes: "Web Cluster".
SSH language, just know the commands that i use often.
my hoster, as he said did upgrade 2 days ago, [had an upgrade to apache 2], and some SSH command that i use before this, now don't work
for example, i had php script, which i run from ssh
[php go.php]
which don't work now ... got an error:
Code:
-bash: php: command not found
so my question is how to find php right path ?
Code:
$ whereis php
output:
Code:
Code:
php: /usr/src/php-5.2.0/php5.spec /usr/src/php-5.2.0/php.ini-dist /usr/src/php-5.2.0/php.ini-recommended /usr/src/php-5.2.0/php.gif /usr/local/bin/php /usr/local/lib/php.ini /usr/local/lib/php
as i understand, path is /usr/local/lib/php
after this try to type
Code:
/usr/local/lib/php go.php
output
Code:
/usr/local/lib/php: is a directory
btw
when i type
echo $PATH
get
Code:
/usr/kerberos/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/X11R6/bin:/home/MYUSERNAME/bin
I'm trying to transfer a cms from 1 site to another and I don't know the full ftp path.. I'm looking for the "/public_html/username/blank/blank/sitefolder" or something similar.. How do I figure this out?
View 2 Replies View RelatedI'm installing a script that's suppose to act as a payment gateway/store. The script requires the virtual path to the secured directory holding the products and everything I've tried doesn't work! It should be something like /home/username/public_html/secured where username is replaced with my username. I'm hosting with godaddy and have tried just about everything on this page: help.godaddyDOTCOM/article.php?article_id=1360 without any luck. Any ideas or experience with this? I'm on the economy plan with godaddy.
View 0 Replies View RelatedWhat would be the full path to the user's directory?
Cpanel's is:
/home/user/public_html
how to change DocumentRoot path?
like from this:
/public_html-maindomain)
/public_html/domain2
/public_html/domain3
/public_html/domain4
/public_html/domain5
to this:
/public_html/maindomain
/public_html/domain2
/public_html/domain3
/public_html/domain4
/public_html/domain5
Just wanted to ask, which folder are the MySQL databases held in for Cpanel? Running CentOS 5 VPS.
View 7 Replies View RelatedHow do I change the path of the Exim log directory? I am using Cpanel/WHM.
View 5 Replies View RelatedI am running Cpanel x 11.
Can I create a subdomain like:
mysub.mydomain.com and instead of its physical location being at:
'public_html/mysub'
Can I change/create its physical location at:
'public_html/inside_dir/yet_another_inside_dir/mysub'
Im having problems configuring my shopping cart.
Im hosting with www.valueweb.com
Does anybody know what is the path to curl?
I called them but they gave me 2 paths and none of them work.
build out a backup datacenter to mirror our facilities currently located in Manhattan.
Does anyone have any recommendations of a datacenter (preferably a carrier neutral facility) that is within walking distance to the NJ PATH station in New Jersey?
We are looking for between 2 and 3 racks with up to four 20 amp power cicuits.
I had a program (APF, actually) install its executable file in /usr/local/sbin/, so I went to add that directory to my PATH variable in .bashrc. I'm able to type commands to executables just fine in other directories, but for some reason I keep getting "command not found errors" from bash when I type in the name of the executable (apf), even when starting/restarting new instances of the shell. Here's my current PATH variable in .bashrc - have I overlooked something?
# Customize the path directory
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/sbin:~/bin:
How to find path to MySQL ?
I need to know command for check path to MySQL.
I am not sure if this is the right area to post this question but I am setting up an autoresponder on my website. To configure it to my site it the instructions say I need to
"# Type the full path to your EMail program.
# If you're not sure of this, ask your server administrator
$mailprog="/usr/sbin/sendmail";
# Type your email address. Make sure
# to place a in front of the @
# As an example: admin@autoresponderunlimited.com
$fromaddr="admin@autoresponderunlimited.com";"
Where would I be able to find this? I have the Linux Deluxe Hosting Plan from godaddy.com