I just finished installing xCache and restart httpd it isnt starting up
root@server2 [~]# service httpd start
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
root@server2 [~]#
The issue I'm having is I want to use Xcache, the php opcode cache for PHP
I've installed it and it works fine, except it only works on ONE domain
I've made sure all domains work in the shard IIS pool, I've also tried copying the PHP.ini file to the domain's httpdocs folder, incase it needs it, but it still won't work
When loading www.thedarkages.info, I get this spammed across my screen
Warning: xcache_isset() [function.xcache-isset]: xcache.var_size is either 0 or too small to enable var data caching in [path]includesclass_datastore.php on line 557
Warning: xcache_isset() [function.xcache-isset]: xcache.var_size is either 0 or too small to enable var data caching in [path]includesclass_datastore.php on line 557
But on this site - www.uoforums.net - There is no error and that forum is using XCache without issue
I've tried increasing the var_size to a higher limit, but it doesn't have any effect.
PHP is running in FastCGI mode right now, I tried setting it to ISAPI mode, but it still threw back the same error
After install MySQL and Apache, everything went well, I tested web server and it was OK. but after I installing PHP, httpd just simply don't run.
When I tried to run httpd, nothing was happened as showing below
[root@localhost ~]# /usr/local/apache/bin/apachectl start
[root@localhost ~]# ps aux |grep httpd
root 2809 0.0 0.2 4988 672 pts/0 S+ 06:52 0:00 grep httpd
[root@localhost ~]#
-----------------------------------------
CentOS 5
MySQL: 5.0.41
httpd-2.2.4
PHP-5.2.3
------------------------------------------
Installation Details
groupadd -g 103 mysql
useradd -u 103 -g mysql mysql
groupadd -g 104 web
useradd -u 104 -g web web
MySQL
./configure --prefix=/usr/local/mysql
--with-extra-charsets=all
--enable-thread-safe-client
httpd
./configure --prefix=/usr/local/apache
--disable-status
--disable-asis
--disable-cgid
--disable-userdir
--disable-cgi
--with-mpm=worker
--enable-so
--enable-deflate
--enable-rewrite
PHP
./configure --disable-all
--with-apxs2=/usr/local/apache/bin/apxs
--with-pcre-regex
--with-zlib-dir
--with-dom-xslt
--with-dom-exslt
--with-gd
--with-jpeg-dir
--with-png-dir
--with-ttf
--with-freetype-dir
--enable-gd-native-ttf
--enable-gd-jis-conv
--with-iconv
--enable-mbstring
--with-mysql=/usr/local/mysql
--with-mysqli=/usr/local/mysql/bin/mysql_config
--with-pdo-mysql=/usr/local/mysql
--enable-pdo
--enable-sockets
--with-dom
--with-xmlrpc
--with-xslt-sablot
--enable-xslt
--enable-soap
--enable-zip
--enable-libxml
--enable-simplexml
--enable-exif
--with-pear
--enable-xml
httpd.conf
User web
Group web
------------------------------------------------------------
to install mod_evasive module on our Apache2 that runs on Fedora server. However, for that we need Apache's apxs to compile it. We found out that we can do that by running the
yum install httpd-devel
However, when we run that, we get the following:
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
httpd-devel i386 2.2.8-1.fc7 updates 144 k
Updating:
httpd i386 2.2.8-1.fc7 updates 1.0 M
openldap i386 2.3.34-7.fc7 updates 291 k
Installing for dependencies:
apr-devel i386 1.2.8-6 fedora 170 k
apr-util-devel i386 1.2.10-1.fc7 updates 54 k
cyrus-sasl-devel i386 2.1.22-8.fc7 updates 351 k
db4-devel i386 4.5.20-5.fc7 fedora 2.3 M
expat-devel i386 1.95.8-9 fedora 129 k
openldap-devel i386 2.3.34-7.fc7 updates 1.5 M
Updating for dependencies:
httpd-manual i386 2.2.8-1.fc7 updates 821 k
mod_ssl i386 1:2.2.8-1.fc7 updates 85 k
openldap-clients i386 2.3.34-7.fc7 updates 179 k
Transaction Summary
==========================================
Install 7 Package(s)
Update 5 Package(s)
Remove 0 Package(s)
Total download size: 7.0 M
We're kind of cautios, because we have never updated Apache on our live server. We'd prefer if we could download and install just the httpd-devel module. Is this possible?
If not, would this mess up any of our existing configuration? Could we expect any problems? And do we need to shut Apache down, then run the updates and only then restart it?
I recently migrated my server from a CentOS VPS to a dedicated Windows Web Server 2008 machine.
Since the migration I have noticed some "odd" behaviour with xcache:
When I open the xcache admin panel I can see the hit counts for the var/php caches, under the CentOS server these values just went up and up into the high millions until the server or Apache was restarted.
Under Windows the hit counts never gets higher than around 6000, typically when I open the xcache admin panel I click on "statistics" a few times to make sure everything is incrementing as normal, however since the server move these get to around the 6k mark and then drops back down to sub 100 and start again.
I have also noticed that if I make changes in the PHP application running on the site (vBulletin) the changes are not reflected immediately and can sometimes take 30 seconds to "come through", this is a behaviour I never saw under CentOS
If this just a quirk of windows, or something I should be looking into further?
if anyone has run any tests or if there is a way to tell one of the other. I would like benchmark test them, just not sure how.
View 2 Replies View RelatedTrying to enable xcache following these instructions:
[url]
Not working
root@server [~]# php -v
PHP 5.2.5 (cli) (built: Feb 27 2008 22:13:14)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
with eAccelerator v0.9.5.2, Copyright (c) 2004-2006 eAccelerator, by eAccelerator
with the ionCube PHP Loader v3.1.32, Copyright (c) 2002-2007, by ionCube Ltd., and
with Zend Extension Manager v1.2.0, Copyright (c) 2003-2007, by Zend Technologies
with Zend Optimizer v3.3.0, Copyright (c) 1998-2007, by Zend Technologies
This is my php.ini file
;;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHP installations.
; By default, PHP installs itself with a configuration suitable for
; development purposes, and *NOT* for production purposes.
; For several security-oriented considerations that should be taken
; before going online with your site, please consult php.ini-recommended
; and http://php.net/manual/en/security.php.
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
;
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
;
; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these lines,
; the builtin defaults will be identical).
;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;
; Enable the PHP scripting language engine under Apache.
engine = On
; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = On
; Allow ASP-style <% %> tags.
asp_tags = Off
; The number of significant digits displayed in floating point numbers.
precision = 12
; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = On
; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the output
; buffering functions. You can also enable output buffering for all files by
; setting this directive to On. If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = Off
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
;output_handler =
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off
; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instanciated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=
; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100
; Whether to enable the ability to force arguments to be passed by reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = On
; Safe Mode
;
safe_mode = Off
; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off
; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =
; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =
; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
;
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_
; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
open_basedir =
; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions = phpinfo, show_source, system, shell_exec, passthru, popen, proc_open, readfile, escapeshellarg ,escapeshellcmd ,proc_close, ini_alter, dl,popen, show_source, exec
; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <font color="??????"> would work.
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000
;
; Misc
;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = On
;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;
max_execution_time = 300 ; Maximum execution time of each script, in seconds
max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
memory_limit = 256M ; Maximum amount of memory a script may consume (8MB)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings
; E_ERROR - fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
;
; Examples:
;
; - Show all errors, except for notices
;
;error_reporting = E_ALL & ~E_NOTICE
;
; - Show only errors
;
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
;
; - Show all errors except for notices
;
error_reporting = 2039
; Print out errors (as a part of the output). For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below). Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
display_errors = Off
; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off
; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = On;
; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors = On;
; Do not log repeated messages. Repeated errors must occur in same file on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; sourcelines.
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On
; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off
; Disable the inclusion of HTML tags in error messages.
;html_errors = Off
; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot.
;docref_root = "/phpmanual/"
;docref_ext = .html
; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"
; String to output after an error message.
;error_append_string = "</font>"
; Log errors to specified file.
error_log = error_log;
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
error_log = error_log;
;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"
; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right, newer
; values override older values.
variables_order = "EGPCS"
; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data. This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off
; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = On
register_long_arrays = On
; Maximum size of POST data that PHP will accept.
post_max_size = 16M
; This directive is deprecated. Use variables_order instead.
gpc_order = "GPC"
; Magic quotes
;
; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = On
; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off
; Use Sybase-style magic quotes (escape ' with '' instead of ').
magic_quotes_sybase = Off
; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =
; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"
; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On
;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;
; UNIX: "/path1:/path2"
include_path = ".:/usr/lib/php:/usr/local/lib/php";
;
; Windows: "path1;path2"
;include_path = ".:/usr/lib/php:/usr/local/lib/php" ;
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =
; Directory in which the loadable extensions (modules) reside.
extension_dir = "/usr/local/lib/php/extensions/no-debug-non-zts-20060613"
zend_extension="/usr/local/IonCube/ioncube_loader_lin_5.2.so"
zend_extension_ts="/usr/local/IonCube/ioncube_loader_lin_5.2_ts.so"
extension="eaccelerator.so"
eaccelerator.shm_size="24"
eaccelerator.cache_dir="/var/cache/eaccelerator"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="0"
eaccelerator.shm_prune_period="0"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"
;zend_extension="/usr/local/IonCube/ioncube_loader_lin_5.2.so"
;zend_extension_ts="/usr/local/IonCube/ioncube_loader_lin_5.2_ts.so"
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = Off
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;
; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is zero. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; cgi.fix_pathinfo=0
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0
;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;
; Whether to allow HTTP file uploads.
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
upload_tmp_dir = /tmp
; Maximum allowed size for uploaded files.
upload_max_filesize = 8M
;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On
; Define the anonymous ftp password (your email address)
;from="john@doe.com"
; Define the User-Agent string
; user_agent="PHP"
; Default timeout for socket based streams (seconds)
default_socket_timeout = 60
; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off
;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
; extension=modulename.extension
;
; For example, on Windows:
;
; extension=msql.dll
;
; ... or under UNIX:
;
; extension=msql.so
;
; Note that it should be the name of the module only; no directory information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.
;Windows Extensions
;Note that MySQL and ODBC support is now built in, so no dll is needed for it.
;
;extension=php_bz2.dll
;extension=php_cpdf.dll
;extension=php_crack.dll
;extension=php_curl.dll
;extension=php_db.dll
;extension=php_dba.dll
;extension=php_dbase.dll
;extension=php_dbx.dll
;extension=php_domxml.dll
;extension=php_exif.dll
;extension=php_fdf.dll
;extension=php_filepro.dll
;extension=php_gd2.dll
;extension=php_gettext.dll
;extension=php_hyperwave.dll
;extension=php_iconv.dll
;extension=php_ifx.dll
;extension=php_iisfunc.dll
;extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_java.dll
;extension=php_ldap.dll
;extension=php_mbstring.dll
;extension=php_mcrypt.dll
;extension=php_mhash.dll
;extension=php_mime_magic.dll
;extension=php_ming.dll
;extension=php_mssql.dll
;extension=php_msql.dll
;extension=php_oci8.dll
;extension=php_openssl.dll
;extension=php_oracle.dll
;extension=php_pdf.dll
;extension=php_pgsql.dll
;extension=php_printer.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_sockets.dll
;extension=php_sybase_ct.dll
;extension=php_w32api.dll
;extension=php_xmlrpc.dll
;extension=php_xslt.dll
;extension=php_yaz.dll
;extension=php_zip.dll
;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;
[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables = Off
[mail function]
; For Win32 only.
;SMTP = localhost;
smtp_port = 25
; For Win32 only.
;sendmail_from = me@localhost.com;
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
sendmail_path = /usr/sbin/sendmail -t -i;
[Java]
;java.class.path = .php_java.jar
;java.home = c:jdk
;java.library = c:jdkjreinhotspotjvm.dll
;java.library.path = .
[SQL]
sql.safe_mode = Off
[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented
; Allow or prevent persistent links.
odbc.allow_persistent = On
; Check that a connection is still valid before reuse.
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1
[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
mysql.max_links = -1
; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysql.default_port =
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =
; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =
; Maximum time (in seconds) for connect timeout. -1 means no limit
mysql.connect_timeout = 60
; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off
[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1
[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect(). Need a little overhead.
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
pgsql.ignore_notice = 0
; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0
[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybase.max_links = -1
;sybase.interface_file = "/usr/sybase/interfaces"
; Minimum error severity to display.
sybase.min_error_severity = 10
; Minimum message severity to display.
sybase.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings. This
; compatibility mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off
[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybct.max_links = -1
; Minimum server message severity to display.
sybct.min_server_severity = 10
; Minimum client message severity to display.
sybct.min_client_severity = 10
[dbx]
; returned column names can be converted for compatibility reasons
; possible values for dbx.colnames_case are
; "unchanged" (default, if not set)
; "lowercase"
; "uppercase"
; the recommended default is either upper- or lowercase, but
; unchanged is currently set for backwards compatibility
dbx.colnames_case = "unchanged"
[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0
[browscap]
;browscap = extra/browscap.ini
[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =
; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =
; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =
; Allow or prevent persistent links.
ifx.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
ifx.max_links = -1
; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0
; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0
; Trailing blanks are stripped from fixed-length char columns. May help the
; life of Informix SE users.
ifx.charasvarchar = 0
; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0
; NULL's are returned as empty strings, unless this is set to 1. In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0
[Session]
; Handler used to store/retrieve data.
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
; As of PHP 4.0.1, you can define the path as:
; session.save_path = "N;/path"
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
;session.save_path = /tmp
; Whether to use cookies.
session.use_cookies = 1
; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
session.use_only_cookies = 1
; Name of the session (used as cookie name).
session.name = PHPSESSID
; Initialize session on request startup.
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0
; The path for which the cookie is valid.
session.cookie_path = /
; The domain for which the cookie is valid.
session.cookie_domain =
; Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php
; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.
session.gc_probability = 1
session.gc_divisor = 100
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm
; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.
session.bug_compat_42 = 1
session.bug_compat_warn = 1
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =
; How many bytes to read from the file.
session.entropy_length = 0
; Specified here to create the session id.
session.entropy_file =
;session.entropy_length = 16
;session.entropy_file = /dev/urandom
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache
; Document expires after n minutes.
session.cache_expire = 180
; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0
; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="
[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1
; Minimum error severity to display.
mssql.min_error_severity = 10
; Minimum message severity to display.
mssql.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off
; Connect timeout
;mssql.connect_timeout = 5
; Query timeout
;mssql.timeout = 60
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096
; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0
; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On
; Use NT authentication when connecting to the server
mssql.secure_connection = Off
; Specify max number of processes. Default = 25
;mssql.max_procs = 25
[Assertion]
; Assert(expr); active by default.
;assert.active = On
; Issue a PHP warning for each failed assertion.
;assert.warning = On
; Don't bail out by default.
;assert.bail = Off
; User-function to be called if an assertion fails.
;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0
[Ingres II]
; Allow or prevent persistent links.
ingres.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ingres.max_persistent = -1
; Maximum number of links, including persistents. -1 means no limit.
ingres.max_links = -1
; Default database (format: [node_id::]dbname[/srv_class]).
ingres.default_database =
; Default user.
ingres.default_user =
; Default password.
ingres.default_password =
[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"
; Default port to connect to.
pfpro.defaultport = 443
; Default timeout in seconds.
pfpro.defaulttimeout = 30
; Default proxy IP address (if required).
;pfpro.proxyaddress =
; Default proxy port.
;pfpro.proxyport =
; Default proxy logon.
;pfpro.proxylogon =
; Default proxy password.
;pfpro.proxypassword =
[com]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true
[Printer]
;printer.default_printer = ""
[mbstring]
; language for internal character representation.
;mbstring.language = Japanese
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP
; http input encoding.
;mbstring.http_input = auto
; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS
; enable automatic encoding translation accoding to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
;mbstring.encoding_translation = Off
; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;
; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0
[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000
[Crack]
; Modify the setting below to match the directory location of the cracklib
; dictionary files. Include the base filename, but not the file extension.
; crack.default_dictionary = "c:phplibcracklib_dict"
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel = JIS
; Local Variables:
; tab-width: 4
; End:
;extension=mailparse.so
[xcache-common]
extension = xcache.so
[xcache.admin]
xcache.admin.auth = On
xcache.admin.user = ""
xcache.admin.pass = ""
[xcache]
; ini only settings, all the values here is default unless explained
; select low level shm/allocator scheme implemenation
xcache.shm_scheme = "mmap"
; to disable: xcache.size=0
; to enable : xcache.size=64M etc (any size > 0) and your system mmap allows
xcache.size = 0M
; set to cpu count (cat /proc/cpuinfo |grep -c processor)
xcache.count = 1
; just a hash hints, you can always store count(items) > slots
xcache.slots = 8K
; ttl of the cache item, 0=forever
xcache.ttl = 0
; interval of gc scanning expired items, 0=no scan, other values is in seconds
xcache.gc_interval = 0
; same as aboves but for variable cache
xcache.var_size = 0M
xcache.var_count = 1
xcache.var_slots = 8K
; default ttl
xcache.var_ttl = 0
xcache.var_maxttl = 0
xcache.var_gc_interval = 300
xcache.test = Off
; N/A for /dev/zero
xcache.readonly_protection = Off
; for *nix, xcache.mmap_path is a file path, not directory.
; Use something like "/tmp/xcache" if you want to turn on ReadonlyProtection
; 2 group of php won't share the same /tmp/xcache
; for win32, xcache.mmap_path=anonymous map name, not file path
xcache.mmap_path = "/dev/zero"
; leave it blank(disabled) or "/tmp/phpcore/"
; make sure it's writable by php (without checking open_basedir)
xcache.coredump_directory = ""
; per request settings
xcache.cacher = On
xcache.stat = On
xcache.optimizer = Off
[xcache.coverager]
; per request settings
; enable coverage data collecting for xcache.coveragedump_directory and xcache_coverager_start/stop/get/clean() functions (will hurt executing performance)
xcache.coverager = Off
; ini only settings
; make sure it's readable (care open_basedir) by coverage viewer script
; requires xcache.coverager=On
xcache.coveragedump_directory = ""
;extension=/usr/local/lib/php/extensions/no-debug-non-zts-20020429/ffmpeg.so
[eAccelerator]
;extension=/usr/local/lib/php/extensions/no-debug-non-zts-20020429/ffmpeg.so
[Zend]
zend_extension_manager.optimizer=/usr/local/Zend/lib/Optimizer-3.3.0
zend_extension_manager.optimizer_ts=/usr/local/Zend/lib/Optimizer_TS-3.3.0
zend_optimizer.version=3.3.0
zend_extension=/usr/local/Zend/lib/ZendExtensionManager.so
zend_extension_ts=/usr/local/Zend/lib/ZendExtensionManager_TS.so
Please suggest proper eaccelerator settings as well for this server specs:
Dual xeon 3.4GHz
4GB memory
mysql 5
cpanel 11
apache 2 / php 5
With my hosting account I have access to both memcache and xcache at the same time which at this point I am utilizing both but I have to decide which plugin for wordpress I would like to install since they are both have the same file name and would need to be installed in the same directory.
Currently I am running the memcache plugin and not the xcache because my host says it will perform better under higher load being that memcache is installed on a separate server with 16GB of RAM.
They feel using the xcache plugin would really on be beneficial during times of little strain on the server but not during heavy load.
so what do you think? Like I said both caching systems are installed and running but which plugin should I make wordpress utilize? memcache or xcache?
FYI - I do have times when I have 600 to 800 concurrent connections
What do you think is better Xcache or eAccelerator and why?
I can see that xcache is a little bit faster but what is better to use?
I have a server and I have several proxies on it together with some of my websites.
The thing is sometime it will overload.
I was thinking to install xcache or eaccelerator.
which should I install? Which is better?
Is XCache incompatible with Ioncube?
I've had them working before, but they don't seem to work on a new VPS.
I managed to install xcache on my Centos 4.5 server.
Xcache is shown in my phpinfo, but I think there's problem since php -v gives me following error, I don't have a clue how to fix this. See attached images.
I tried several different configurations in xcache.ini, but all with this same result.
It seems that this error doens't occur always.
PHP Warning: Module 'XCache' already loaded in Unknown on line 0
/dev/zero: No space left on device
Failed creating file mappping
PHP Fatal error: Failed creating file mappping in Unknown on line 0
PHP Fatal error: XCache: Cannot create shm in Unknown on line 0
PHP 5.2.9 (cli) (built: Mar 10 2009 16:30:52)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies
with XCache v1.2.2, Copyright (c) 2005-2007, by mOo
Segmentation fault
I recently received an email from GeekStorage support telling me that they just won't enable xcache.var_size on their shared hosting server.
If you're going to host a vBulletin board on GeekStorage, forget it -- XCache datastore won't work there
Trying to enable xcache on my cpanel, centos server (suphp *not* enabled)
Followed this guideline
[url]
Xcache shows up in php -m output, however I get this output as well
Code:
root@server [/tmp]# php -v
PHP 5.2.8 (cli) (built: Jan 5 2009 16:23:03)
Copyright (c) 1997-2008 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies
with the ionCube PHP Loader v3.1.34, Copyright (c) 2002-2009, by ionCube Ltd., and
with Zend Extension Manager v1.2.2, Copyright (c) 2003-2007, by Zend Technologies
with Zend Optimizer v3.3.3, Copyright (c) 1998-2007, by Zend Technologies
Segmentation fault (core dumped)
In the /usr/local/lib/php.ini file I had this portion setup before the Zend portion...
Code:
[xcache-common]
extension = xcache.so
[xcache.admin]
xcache.admin.auth = On
xcache.admin.user = ""
xcache.admin.pass = ""
[xcache]
; ini only settings, all the values here is default unless explained
; select low level shm/allocator scheme implemenation
xcache.shm_scheme = "mmap"
; to disable: xcache.size=0
; to enable : xcache.size=64M etc (any size > 0) and your system mmap allows
xcache.size = 128M
; set to cpu count (cat /proc/cpuinfo |grep -c processor)
xcache.count = 4
; just a hash hints, you can always store count(items) > slots
xcache.slots = 8K
; ttl of the cache item, 0=forever
xcache.ttl = 0
; interval of gc scanning expired items, 0=no scan, other values is in seconds
xcache.gc_interval = 0
; same as aboves but for variable cache
xcache.var_size = 0M
xcache.var_count = 1
xcache.var_slots = 8K
; default ttl
xcache.var_ttl = 0
xcache.var_maxttl = 0
xcache.var_gc_interval = 300
xcache.test = Off
; N/A for /dev/zero
xcache.readonly_protection = Off
; for *nix, xcache.mmap_path is a file path, not directory.
; Use something like "/tmp/xcache" if you want to turn on ReadonlyProtection
; 2 group of php won't share the same /tmp/xcache
; for win32, xcache.mmap_path=anonymous map name, not file path
xcache.mmap_path = "/dev/zero"
; leave it blank(disabled) or "/tmp/phpcore/"
; make sure it's writable by php (without checking open_basedir)
xcache.coredump_directory = ""
; per request settings
xcache.cacher = On
xcache.stat = On
xcache.optimizer = Off
[xcache.coverager]
; per request settings
; enable coverage data collecting for xcache.coveragedump_directory and xcache_coverager_start/stop/get/clean() functions (will hurt executing performance)
xcache.coverager = Off
; ini only settings
; make sure it's readable (care open_basedir) by coverage viewer script
; requires xcache.coverager=On
xcache.coveragedump_directory = ""
[Zend]
zend_extension_manager.optimizer=/usr/local/Zend/lib/Optimizer-3.3.3
zend_extension_manager.optimizer_ts=/usr/local/Zend/lib/Optimizer_TS-3.3.3
zend_optimizer.version=3.3.3
extension=pdo.so
extension=pdo_sqlite.so
extension=sqlite.so
extension=pdo_mysql.so
allow_url_include = On
; Memcache Section
extension = memcache.so
memcache.allow_failover = 0
When I search for "zend_extension" this is the result:
Code:
; Directory in which the loadable extensions (modules) reside.
extension_dir = "/usr/local/lib/php/extensions/no-debug-non-zts-20060613"
zend_extension="/usr/local/IonCube/ioncube_loader_lin_5.2.so"
zend_extension_ts="/usr/local/IonCube/ioncube_loader_lin_5.2_ts.so"
zend_extension="/usr/local/lib/php/extensions/no-debug-non-zts-20060613/xcache.so"
If I move the xcache line to the first line, before the ioncube one, I get this error:
root@server [/usr/local/lib/php/extensions/no-debug-non-zts-20060613]# php -m
Segmentation fault (core dumped)
Quote:
root@server [/usr/local/lib/php/extensions/no-debug-non-zts-20060613]# ls -lh
total 290M
drwxr-xr-x 2 root root 4.0K May 11 11:48 ./
drwxr-xr-x 5 root root 4.0K Sep 17 2007 ../
-rw------- 1 root root 144M May 11 11:48 core.9588
-rw------- 1 root root 144M May 11 11:48 core.9592
-rwxr-xr-x 1 root root 495K Jan 5 16:34 eaccelerator.so*
-rw-r--r-- 1 root root 3.1K Jan 5 22:04 error_log
-rwxr-xr-x 1 root root 142K Sep 17 2007 mailparse.so*
-rwxr-xr-x 1 root root 313K Jan 5 20:43 memcache.so*
-rwxr-xr-x 1 root root 124K Jan 5 16:23 pdo_mysql.so*
-rwxr-xr-x 1 root root 265K Jan 5 16:23 pdo.so*
-rwxr-xr-x 1 root root 1.4M Jan 5 16:23 pdo_sqlite.so*
-rwxr-xr-x 1 root root 989K Jan 5 16:23 sqlite.so*
-rwxr-xr-x 1 root root 323K May 11 11:31 xcache.so*
My config:
PHP 5.2.8
Zend Opt 3.3.3
suphp disabled
Apache 2.2
how can i install xcache with Zend Optimizer v3.3.3 to together ?
because when i install it together the php not working on my server
i install only xcache but i need Zend with him.
the php modules
Code:
[PHP Modules]
bcmath
calendar
ctype
curl
date
dom
filter
ftp
gd
hash
iconv
imap
ionCube Loader
json
libxml
mbstring
mysql
pcre
posix
Reflection
session
SimpleXML
sockets
SPL
SQLite
standard
suhosin
tokenizer
XCache
xml
xmlreader
xmlwriter
zip
zlib
[Zend Modules]
XCache
the ionCube PHP Loader
I have been trying to figure out which one I should be using for my wordpress site. I have read some discussion but after reading it all I am on the fence. Will Xcache work with cpanel?
The server is running XEN, with cpanel/whm, php5
The server spec is:
3.0Ghz - 8 cpu's
2048MB RAM, and 2048MB SWAP
I have also heard some people using litespeed server, would this be any good?
I have some problems with xcache actually, then i want to remove totaly xcache and install APC in Debian.
How to do this?
I have just migrated my server from a Linux CentOS VPS to a dedicated Windows Web Server 2008, everything seems to have gone quite well except xcache.
I have installed xCache v1.2.2 with the following configuration:
Quote:
[xcache-common]
extension = php_xcache.dll
[xcache.admin]
xcache.admin.auth = On
xcache.admin.user = "admin"
xcache.admin.pass = "b95e560e4a31ce20cd522f224932c080"
[xcache]
xcache.shm_scheme = "mmap"
xcache.size = 48M
xcache.count = 2
xcache.slots = 8K
xcache.ttl = 7200
xcache.gc_interval = 300
xcache.var_size = 128M
xcache.var_count = 1
xcache.var_slots = 8K
xcache.var_ttl = 7200
xcache.var_maxttl = 14400
xcache.var_gc_interval = 300
xcache.test = Off
xcache.readonly_protection = Off
xcache.mmap_path = "anonymous"
xcache.coredump_directory = "c:/xCache/tmp"
xcache.cacher = On
xcache.stat = On
xcache.optimizer = On
[xcache.coverager]
xcache.coverager = Off
xcache.coveragedump_directory = ""
If I open phpinfo I can see that xcache is loaded and can see the settings, I have also installed the xcache admin panel and I am able to access that without problem.
However if I enable xcache on in the PHP scripts (vbulletin) file I get multiples of the following errors:
Quote:
Warning: xcache_isset() [function.xcache-isset]: xcache.var_size is either 0 or too small to enable var data caching in [path]includesclass_datastore.php on line 557
Quote:
Warning: xcache_unset() [function.xcache-unset]: xcache.var_size is either 0 or too small to enable var data caching in [path]includesclass_datastore.php on line 596
Quote:
Warning: xcache_set() [function.xcache-set]: xcache.var_size is either 0 or too small to enable var data caching in [path]includesclass_datastore.php on line 597
Now unless I am being thick, var_size is currently set to 128M, it was originally 4M but as the error suggested "too small" I upped it a little with no affect.
The only thing I can think might be related to this is that I am using PHP 5.2.6 and I am using xCache 1.2.2 for PHP 5.2.5 as there is no 5.2.6 version
i´m trying to install xcache to test it on my VPS i have Zend Optimizer 3.3.0.
One of the problems i´m having is this one
PHP Fatal error: [Zend Optimizer] Zend Optimizer 3.3.0 is incompatible with XCache 1.2.1 in Unknown on line 0
And the xcache not being placed on phpinfo.
I try the fix seen in this topic (last 2 post), but didn´t work for me
[url]
There was a tech trying to install xcache but was not possible for him, another one told me that they are incompatible (xcache whit Zend Optimizer), and another one advice me that they are compatible.
Running gallery2 on a box with 4GB RAM. Tried PHP 5.2 w/XCache then with eAccelerator, both caused segmentation faults after a couple days.
"In a previous article, I stressed a common problem with all PHP op-code caches/accelerators: they die with segmentation faults every once in a while."
[url]
Anybody using logwatcher? How many faults per day do you get? If you're using a cache and never get segfaults how busy is your site and how do you prevent them?
We are getting trouble with a site into a dedicadte server, more specific performance issue due to many visitors on same time 1000. Mysql is overload. We would like to use xcache to improve performance, using xcache with plesk 12 centos? its safe, works fine?
View 2 Replies View RelatedI wanted to permanently get rid of xcache from my Plesk 12 as some softwares we are using crashes if xcache is installed or enabled on server.
At present I am doing yum remove to remove xcache php extension from server which is allowing our software to work but after couple of days, its coming back again.
I found traces in autoinstaller log, but I am not sure how to completely disable only xcache for all php versions installed on server i.e. PHP 5.3, 5.4, 5.5
i am using seperate server for sql .But my httpd server failed many time when i checked maximum number of httpd connection then my sql server using too many connection what is the reason of this problem . Is my sql server using as a slave in a ddos attack or sql server need http connection?
View 2 Replies View RelatedI trying:
Code:
[root@serwer /]# httpd restart
/usr/sbin/httpd restart: httpd not running, trying to start
/usr/sbin/httpd restart: httpd could not be started
Code:
[root@serwer /]# /etc/rc.d/init.d/httpd configtest
Syntax OK
Help
Cpanel with Cent os
i have creat my new user and upload his files on it. but when i try this link:
http://ip/~user
i have this error and my friend say that your httpd have problem. but its my new server. how can i solve it ?
404 Not Found
The server can not find the requested page:
ip/~user (port 80)
Please forward this error screen to 69.197.166.71's WebMaster.
Apache/2.0.63 (Unix) mod_ssl/2.0.63 OpenSSL/0.9.8b mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.8 Server at 69.197.166.71 Port 80
i try it with his doamin and i have same error.
I have 1764 pid started by httpd daemon. I think for some reason the httpd pid is not closing for me. How do i make sure that all of the httpd pid are closing.
View 2 Replies View RelatedI know that there are a lot of posts about this but... i have a problem w my apache... it was working fine until today... i get this e-mail from WHM whenever httpd fails... and its pretty often:
Quote:
httpd failed @ Mon Aug 18 16:23:13 2008. A restart was attempted automagically.
Failure Reason: Timeout while trying to connect to service
I wanna know how to check in the error log the entries of just today. because when i put "cat error_log" i start receiving things from last week and this is happening today...
i've tried /scripts/rebuildhttpdconf and then restarted, but still the same.