Create .tar.gz Archive
Jul 5, 2009Im in /home/test
i need to create an archive from all test contain.
How can do it?
Im in /home/test
i need to create an archive from all test contain.
How can do it?
how the admin of the other site can edit the vbulletin archive. The admin tried to edit it but found that she couldn't do that.
No skipping step from step 2 to 5. If you are going from step 2 to 5, you should list step 3 and 4.
how to edit a vbulletin archive.
I am offering an email service through Plesk that archives all mail on a per-domain basis. I am having a hard time finding any real solutions to this. So far, I've found:
MailArchiva
Mailpiler
While mailarchiva seems like a decent solution, I don't know if I can only do on a per domain basis.
When I try to unzip my archive on FileManager, I see on logs next message:
psacontentfile.PSAUnZipperException: File 'new/.access.php' extract error ---> psacontentfile.PSAUnZipperException: Libray cannot extract this entry version required (778) ---> ICSharpCode.SharpZipLib.Zip.ZipException: Libraycannot extract this entry version required (778)
at ICSharpCode.SharpZipLib.Zip.ZipInputStream.InitialRead(Byte[] destination, Int32 offset, Int32 count)
[Code] ......
How to go about that.
Anyone have done that before care to share information?
Customer has requested the following:
"Create a zend id for your machine." This is apparently for them to create a product key for their software and have to bind to it?!
I have never heard of this and have been unable to locate any information on it.
This is a Centos box with php 5.2.5 installed:
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
with Zend Extension Manager v1.2.2, Copyright (c) 2003-2007, by Zend Technologies
with Zend Optimizer v3.3.0, Copyright (c) 1998-2007, by Zend Technologies
how to go about this or even what this is?
I has changed my server before 5 day ago
I note there are something error on my archive page
it was like this before I change my server
www.3walim.com/archive/index.php/t-7439.html
not if you use url above it will redirect you to vbulletin/archive/index.php
but if you make url as this
www.3walim.com/archive/index.php?t-7439.html
it will work right
the problem is now I have more than 40 K of page on google indexed with "/" so and google will remove it cuz all page it now redirect you to archive/index.php not to threade
I open ticket and they tell me vbulletin not have any thing to do to fix it it must doing from server
create virtual environments using ssh
(virtuozzo).
(my host does not give VZCC license)
How can i create a /tmp partition (as cpanel recomends) in my openvz vps to install cpanel?
Quote:
/tmp 1 GB (1024 MB)
/ Grow to fill disk.
create VPS PACKAGES under my cent0s dedicated server?
View 14 Replies View RelatedHow can I create a new account in SSH? how can I do this for one of our resellers?
we use cPanel.
can any body give me pdf or any linki that learn how to create vps on server?
View 12 Replies View RelatedI am been playing with tutorials online since yesterday and can't find any to do something I think is very simple.
In PHP, I have the full path to an image saved in variable $filename
How do I use the GD library to generate a 100x100 thumbnail of $filename and display it within my PHP code without having to use more PHP files or writing the new thumbnail image to a permanent location on the drive?
How can create a sub domain for one of our accounts in SSH?
we use cPanel.
I have cpanel on my server but my license have some problem and I cannot login to cpanel or WHM , I have root access.
I need to create a Database immediately as same as cpanel create that.
how can I create a database with user and user privileges (same as when I create in cpanel)?
i have server windows 2003.
ISS 6.
PHP 5.x
MySQL 5.0
how to create rules with ip/5hit/s is black list and auto ban ip with IPSec.
when test attack file .php
info test :
using code attack files.
attack file test.php ( code files : <?php echo "we are test" ; ?> )
Ex : attack files test.php ( http://mydomain.php/test.php )
attack 200hit/s ( all files .php is not run ) php application is hang.
also wherewith code attack. i tested asp, html. it isn't problem. ( 1879hit/s ) ( good working)
how to create rules ban ip with 5hit/s?
There is no directory for the root account on my server. The server admin tells me this:
"It looks like all the files in there were deleted. I suggest you terminate and recreate the site in order to reset all the relevant directories."
Can any one tell me the ssh command that will do this for me?
How may i create virtual ssl?
for example will that you install plesk,all site support of https or ssl
or por 2083 for cpanel
I want create one virtual ssl that was only https for self
my site is robo4u.com(example)
I lesson that we can with openssl but how may?
Config? setting? or ...
I am having issues with my server and WHM. First of all, i followed the link here but i am a bit confused. When i goto add the Assign IP Address button it pops up and says no free ip addresses, i click on Add an A Entry for this Nameserver and the window pops up warning the domain file doesnt exist, it says it creates one and adds the A record.
A few notes, i did change the alternative main ethernet device to venet0:0, and the hostname to myserver.mydomain.net (as well as the actual hostname, so they match in both areas). On clicking next on the initial setup, i enabled the local nameserver. The setup completed and then the problems began.
Another massive issue i have is that i cannot create accounts, i goto create a new account and enter all the information. i hit create and the status says Account Created Sucessfully. However the account isnt listed in the account list, it is however listed in the dns zones (under edit dns).
Checking a few places:
root [~]# cat /etc/nameserverips
90.90.90.90=NS1.MYDOMAIN.NET
90.90.90.91=NS2.MYDOMAIN.NET
root[~]# cat /etc/resolv.conf
nameserver 80.80.80.80
nameserver 80.80.90.80
root [~]# cat /etc/wwwacct.conf
ADDR 90.90.90.90
CONTACTEMAIL email@gmail.com
CONTACTPAGER
DEFMOD x
ETHDEV venet0:0
FTPTYPE proftpd
HOMEDIR /home
HOMEMATCH home
HOST myserver.mydomain.net
LOGSTYLE combined
MINUID
NS ns1.mydomain.net
NS2 ns2.mydomain.net
NS3
NS4
NSTTL 86400
SCRIPTALIAS y
TTL 14400
root@gizmo [~]#
root [~]# cat /etc/named.conf
include "/etc/rndc.key";
controls {
inet 127.0.0.1 allow { localhost; } keys { "rndckey"; };
};
options {
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
};
zone "." IN {
type hint;
file "/var/named/named.ca";
};
zone "localdomain" IN {
type master;
file "/var/named/localdomain.zone";
allow-update { none; };
};
zone "localhost" IN {
type master;
file "/var/named/localhost.zone";
allow-update { none; };
};
zone "0.0.127.in-addr.arpa" IN {
type master;
file "/var/named/named.local";
allow-update { none; };
};
zone "255.in-addr.arpa" IN {
type master;
file "/var/named/named.broadcast";
allow-update { none; };
};
zone "0.in-addr.arpa" IN {
type master;
file "/var/named/named.zero";
allow-update { none; };
};
zone "ns1.mydomain.net" {
type master;
file "/var/named/ns1.mydomain.net.db";
};
zone "ns2.mydomain.net" {
type master;
file "/var/named/ns2.mydomain.net.db";
};
I am confused about the ns1.mydomain.net and ns2.mydomain.net, surely these should be under one zone file mydomain.net.db? Can anyone please enlighhten me as to why WHM is creating the two zones seperately, or infact is creating as i believe subdomains?
I would like to run custom nameservers, but it says i only have 1 free ip. Do i need to purchase more ip addresses? When i goto 'Show or Delete Current IP Addresses' both my ip addresses are shown 90.90.90.90 and 90.90.90.91, but there is no delete button, it is only a list of the IPs in green.
Are there any fixes i can do, i dont understand why it is broken. How about resetting and performing a reinstall, where is the license file for WHM/cPanel stored, maybe i could move that out of the way, reinstall cPanel then re-register the license. Can i simply reinstall over the top and reset my settings to default?
I have a linux server and permenently I not have access to any control panel. I just need to know:
1 - how I can create accounts via ssh.
2 - how I can create emails for special accounts via ssh?
I am running a small VPS plan. I created one share account and login to cpanel but get some errors.
Can not create database from that cpanel .I don't know what i should do?
I see all the hosting providers are now offering rollovers, can someone please help on how to setup a rollover? I know you would have to have two different hosting providers using different backbones, but how do you have one provider pull the information to the other provider?
View 4 Replies View Relatedwhen i am trying to use php my admin i am getting
#1 - Can't create/write to file '/tmp/#sql_bba_0.MYI' (Errcode: 30)
when i am trying to delete a file from /tmp i am getting
rm: cannot remove `sess_***': Read-only file system
i have Linux box with cpanel,
How can I create additional ftp user using SSH and to give access only to a specified folder for example,
httpdocs/folder1/
how to create a separated DNS server?
It seems that the LSN DNS servers aren't reaching all of our customers and I've ruled everything out down to DNS.
We have a good VPS ready to take on the task of becoming our DNS servers.
how can i creat backup from my users every 12 houer on cpanel?
in standard mode. cpanel cant do it. it can backup every day.
I have a USB drive with Uniserver, XAMP, and WOS portable webservers installed.
The problem is that I would like to have a "test" directory that is independent of these three servers, but still accessible by typing something like "localhost/test" into the browser, regardless of which package I'm running.
Each server package has its own neat little pros and cons and I'd like to be able to play around with all of them and still have the same common access to the same test directory.