I am getting problem in cPanel installation, i tried 5-6 times but no success.
please find the log of the cpanel installation
...3....2....1..Fetching http://httpupdate.cpanel.net/cpanelsync/RELEASE/cpanel/ base/backend/webdisk.vbs (0)....@208.109.109.239......connected......receiving.. .100%......Done
md5sum mismatch (actual: cbd901252be59b37d33ffbd5440c888a) (expected: d0f0b90167 9da0932c023931f38ccecb)....
I'm having trouble getting an SSL certificate setup on a domain through WHM. I was originally getting a "Modulus mismatch, key file does not match certificate." error. I contacted RapidSSL and they had me generate a new CSR for the domain and forwarded a new cert. I'm still getting the same error, which makes me think it's a server-side issue.
I have checked and re-checked the cert text to make sure I'm not putting in any extra whitespaces or anything. I know the cert must be somewhat valid because when I put it into WHM and click outside the cert box it automatically pulls up what account it is for (domain, username, ip).
Does anyone know what would cause this?
Thought of sharing this with all.
Issue:
Php function was returning wrong time. There was a difference of 1 hour between the server time and the php time. Due to this ,most of the functions on the site were not working properly.
Fix :
For checking the php time, put the following code in a file, say time.php
Code:
<?php
$time = time();
$result = date(”Y-m-d (D) H:i:s”,$time);
echo “Current date and local time on server = $result “;
?>
Execute the php script.
Code:
[root@localhost ~]# php -a time.php
Interactive mode enabled
Current date and local time on server = 2017-01-30 (Mon) 18:04:25
To get the server time , issue the following command :
Code:
[root@localhost ~]# date
Mon Jan 30 17:04:25 IST 2017
You can see the difference of one hour between the server time and the php time.
For fixing this, you need to install the PECL timezonedb module.
Code:
[root@localhost ~]# pecl install timezonedb
At the end , you might see the following message :
==========================
Build process completed successfully
Installing ‘/usr/local/lib/php/extensions/no-debug-non-zts-20060613/timezonedb.s o’
install ok: channel://pecl.php.net/timezonedb-2009.6
configuration option “php_ini” is not set to php.ini location
You should add “extension=timezonedb.so” to php.ini
==========================
So , add the line ” extension=timezonedb.so” to the php.ini file and restart apache.
There shouldn’t be any mismatch in time now.
Trying to restore db for my friend, was able to back up db via ssh using the username and pwd, but while restoring db in a new host get : Password mismatch error,
View 0 Replies View RelatedI have just bought a switch Cisco 3750. However, when I plugged in the uplink. The link is set to half-duplex only (auto-negoiation).
Below is the error in the "Diagnostic Log" of the log:
03:54:52: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on FastEthernet1/0/18 (not full duplex), with sw6.hkg3.asianetcom.net GigabitEthernet0/21 (full duplex).
I have tried to set the port to "Full" in Cisco. But, the link drops immediately. Could anyone tell me how to fix that?
I'm having a bit of a problem with my SSL certificate and can't seem to work out how to get around it.
Trying to install a RapidSSL certificate to one of my websites but for some reason when i enter the certificate into cPanel it says:
modulus mismatch, key file does not match certificate. Please use the correct key file ..
where I can find a Cpanel DNS only installation guide?
View 2 Replies View RelatedI am trying to automate the installation of YUM, cPanel/WHM and CSF.
I have written a script that works perfectly all the way down to installing CSF...
It gives me the following error when moving onto the CSF installation;
--05:03:37-- [url]
Resolving www.configserver.com... 85.13.195.235
Connecting to www.configserver.com|85.13.195.235|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 433358 (423K) [application/x-tar]
Saving to: `csf.tgz'
100%[=======================================>] 433,358 338K/s in 1.3s
05:03:39 (338 KB/s) - `csf.tgz' saved [433358/433358]
--05:03:39-- http://%0D/
Resolving 15... failed: Name or service not known.
FINISHED --05:03:39--
Downloaded: 1 files, 423K in 1.3s (338 KB/s)
tar:
: Not found in archive
tar: Error exit delayed from previous errors
./cPanelServer.sh: line 9: cd: csf: No such file or directory
sh: install.sh: No such file or directory
./cPanelServer.sh: line 13: unexpected EOF while looking for matching `"'
./cPanelServer.sh: line 18: syntax error: unexpected end of file
Script Contents;
Code:
./yum.sh
cd /home
wget layer1.cpanel.net/latest
sh latest
cd /
rm -fv csf.tgz
wget [url]
tar -xzf csf.tgz
cd /csf
sh install.sh
echo -n "TESTING = "1"
read word
sed "s/$word/TESTING = "0"/g" /etc/file.conf > /etc/file.conf.new
mv /etc/file.conf.new /etc/file.conf
service csf restart
done
It's seems the script is having issues extracting "csf.tgz", but I have no clue.
TBH, this is my first ever script and I'm surprised any of it works!
What is ASSP? ASSP is an Anti-Spam SMTP Proxy . The homepage can be found here. ASSP is a lightweight daemon that can filter mail based on various things such as SPF, RBLs, Bayesian word lists, as well as blocking email addresses from getting mail, or having mail filtered.
This tutorial will walk you through getting the admin interface for CPanel setup for ASSP. Currently, a paid user interface can be obtained here (note that I am in no way affiliated with, nor have I tried to use this UI, I am just offering the link to those that might find it useful)
Firstly, the setup:
You will need to activate Cpanel PRO (pro.cpanel.net/activate) for your server in order for this to fully work. This activation is currently free. Simply go to the previous mentioned URL and enter your IP address if you have not done so already.
Once you have activated CPanel PRO, go into whm->addon modules and check clamav connector, then click on "save". This will install clamav for you to use
Once you have done THIS, go to whm->service manager and UNcheck spamd (it is no longer necessary with ASSP), and again click on save/submit. Note that this IS optional, however the purpose of ASSP is to defeat spam before it GETS to SpamAssassin.
Once you have done THAT, go into whm -> tweak settings and uncheck SpamAssassin and BoxTrapper mail.
Secondly, the requirements:
ASSP needs certain perl modules established To install these, simply login (as root) to your server, and type the following
Code:
/scripts/perlinstaller --force Compress::Zlib
/scripts/perlinstaller --force Email::Valid
/scripts/perlinstaller --force File::ReadBackwards
/scripts/perlinstaller --force File::Scan::ClamAV
/scripts/perlinstaller --force Mail::SPF::Query
/scripts/realperlinstaller --force Mail::SRS
/scripts/realperlinstaller --force Tie::RDBM
/scripts/realperlinstaller Sys::Syslog
/scripts/perlinstaller --force Net::LDAP
/scripts/perlinstaller --force Time::HiRes
/scripts/perlinstaller --force Tie::DBI
Note that the --force is optional, however it will make sure you've got it installed. Do these one at a time as some of these have configurable options to them.
One more perl module is needed. Since the later versions of Net::DNS are known to cause issues with RBLs, SPFs and the like, it is advised to use 0.57 . This can be obtained by doing the following:
Code:
mkdir /usr/local/assp
cd /usr/local/assp
mkdir /usr/local/assp/tmp
cd /usr/local/assp/tmp
wget [url]
tar xzf Net-DNS-0.57.tar.gz
cd Net-DNS-0.57
perl Makefile.PL
make
make test
make install
Do NOT remove the /usr/local/assp/tmp directory as when you update cpanel, it will try to auto update Net::DNS again, so you will want this intact.
Now, let's get with the program here and install ASSP:
Code:
cd /usr/local/assp
wget [url]
unzip -d /usr/local/assp /usr/local/assp/ASSP_1.2.6-Install.zip
mv --target-directory=/usr/local/assp /usr/local/assp/ASSP/*
mv --target-directory=/usr/local/assp /usr/local/assp/ASSP/.DS_Store
rm -rf /usr/local/assp/__MACOSX
rm -rf /usr/local/assp/ASSP
rm -f ASSP_1.2.6-Install.zip
rm -f Win32-quickstart-guide.txt;rm -f freshclam.bat
cd /usr/local/assp
mkdir pb
cd pb
touch denysmtp.txt
touch exportedextreme.txt
touch pbdb.black.db
touch pbdb.rbl.db
touch pbdb.white.db
cd /usr/local/assp
mkdir /usr/local/assp/notspam
mkdir /usr/local/assp/spam
mkdir /usr/local/assp/errors
mkdir /usr/local/assp/errors/notspam
cd /usr/local/assp
wget [url]
chmod 755 start
wget [url]
chmod 755 stop
cd /etc/rc.d/init.d
wget [url]
chmod 755 assp
The core of ASSP is now installed. However, the development versions have updated functions to use for users. Of course, this is completely optional, but is recommended completely. This can be done by the following in SSH
Code:
cd /usr/local/assp/
mv assp.pl assp.pl_old
mv spamdb spamdb.old
mv rebuildspamdb.pl rebuildspamdb.pl.old
mv repair.pl repair.pl.old
mkdir Data
mkdir Data/Lists
wget [url]
wget [url]
000F4555.2/rebuildspamdb.pl
wget [url]
wget [url]
mv assp.css images
wget [url]
cd Data/Lists
wget [url]
chmod u+x /usr/local/assp/*.pl
Now, let's get it up and running, and configure it, shall we?
Code:
cd /usr/local/assp
/etc/init.d/assp start
You'll see ASSP sending out some messages and then doing nothing. This is ok, and it's the expected response. Now, we need to edit some stuff. Hit ctrl-c (cancel) to shut down ASSP
once it's stopped, you'll see the following file in the assp directory - assp.cfg . Edit that with whatever you want for an editor, something like:
Code:
nano assp.cfg
You want to change a few options immediately just to get it working
Look for the lines that are something like:
Code:
runAsGroup:=
runAsUser:=
and change them to be:
Code:
runAsGroup:=root
runAsUser:=root
Then look for the line that is
Code:
AsADaemon:=
and change it to
Code:
AsADaemon:=1
Now, let's change the password just so that we're secure:
look for the line that is
Code:
webAdminPassword:=nospam4me
and change that to
Code:
webAdminPassword:=insertrandompasswordhere
Now, let's tell ASSP to setup and accept mail for our domains. Look for the line something like
Code:
localDomains:=
and change that to be
Code:
localDomains:=file:/etc/localdomains
Almost there, just a couple more changes needed.
Look for the line that is something like
Code:
smtpDestination:=127.0.0.1:225
and change that to be
Code:
smtpDestination:=127.0.0.1:125
(or another port instead of 125, just REMEMBER the port!)
and one more change
change the line that looks like
Code:
listenPort:=125
to
Code:
listenPort:=25
Now save and exit the file. If you're using nano/pico, that would be ctrl-x , just make SURE to save the file before you exit!
Now, let's get ASSP fired up again
Code:
/etc/init.d/assp start
let's make sure you have assp starting on system boot:
Code:
chkconfig --add assp
Let's add a crontab to make sure that ASSP rebuilds the bayesian spam list
Quote:
crontab -e
Code:
10 4 * * * cd /usr/local/assp;/usr/local/assp/rebuildspamdb.pl
Occasionally, what I've seen is ASSP will get "hung" on certain things and just kill itself. This fix will work for this, and make sure your ASSP installation is running smoothly
Open up another file on the server, my example will be /bin/asspcheck. In this file, add the following contents
Code:
assplog=/usr/local/assp/check.log
DATE=`date "+%m-%d-%y [%k:%M]"`
pidof=/usr/local/assp/pid
thispid=`cat $pidof`
if [ ! -d /proc/$thispid ];then
rm -rf $pidof;
/etc/init.d/assp start
echo "$DATE - ASSP - restarted" >> $assplog
else
echo "$DATE - ASSP - ok" >> $assplog
fi
Now, chmod the file itself
Code:
chmod u+x /bin/asspcheck
Now, make sure it's called every 60 seconds. Add this to your root crontab
Quote:
crontab -e
Code:
* * * * * /bin/asspcheck
Now, let's go BACK into WHM and setup the variables needed to get exim to use ASSP
In exim configuration editor, click on "advanced editor"
Clear out EVERYTHING from all of the existing boxes. Keeping these with data can cause ASSP to not function as it should
When you've done that, add the following to the top box:
Code:
# assp
local_interfaces = 127.0.0.1.125
If you changed this variable to something else
Code:
smtpDestination:=127.0.0.1:125
put in the other port, NOT 125, so it would look like 127.0.0.1.whateverporthere
Click on Save
Exim will restart and you now have a working installation of assp
Now, let's go to it and work with it a bit, shall we?
go to [url], enter the user admin and the password you changed nospam4me to. This will get you logged in and you can tweak the settings as you feel necessary.
ASSP is a great and powerful proxy for any mail server, which blocks using RBLS, whitelists, etc. It is advisable to setup the email interface and let your customers know of this so that you can get them to help you in reporting and addressing spam.
Parts of this howto were taken from this page, however much of that data has been found to be outdated as far as downloads from CVS and the like go, and I've added quite a bit of useful information into it as well.
Go through the ASSP configuration VERY carefully, and ONLY change what you're sure of.
Start with the RBLs, increase the list to 5 and max hits to 2 as suggested.
If you notice problems with this or know how it might be better, hey, feel free to post in here and I'll keep it as updated as possible :)
is it possible to install FreePBX ontop of my Cpanel Installation on my server.
If so, how would i do it? Im currently running Centos 4.7.
I have just started working through the book Build Your Own Database Driven Website Using PHP & MYSQL, and in the installation section I am required to find a file called php5isapi.dll for the IIS, but I have downloaded the latest version of PHP - PHP 5.2.2 and I cannot find this file...
View 1 Replies View RelatedI got the following message after creating my test php script. Can someone explain what
I need to change? I am computer literate, but no techie!
<p>This PHP CGI binary was compiled with force-cgi-redirect enabled. This
means that a page will only be served up if the REDIRECT_STATUS CGI variable is
set, e.g. via an Apache Action directive.</p>
<p>For more information as to <i>why</i> this behaviour exists, see the <a href=[url]>manual page for CGI security</a>.</p>
<p>For more information about changing this behaviour or re-enabling this webserver,
consult the installation file that came with this distribution, or visit
<a href="[url]
I was wondering if there was anyone out there that could do an ffmpeg, flvtool2, mencoder installation on my CentOS 5.2 VPS for $10. I need it to be able to run phpmotion / youtube clone scripts...
View 8 Replies View RelatedI purchased an EV SSL Cert, and all is fine. Installed via cPanel, and I get the green address bar in Firefox, but not in IE.
Comodo (the vendor) have an Auto-Enhancer feature which automatically tells IE to give me a green bar. They state in their FAQ the following instructions to install the feature:
Replace the bundle file that is in use for the web site.
Use the 'SSLCertificateChainFile' directive instead of the 'SSLCACertificateFile'/'SSLCACertificatePath' directives.
I have download a .CA-BUNDLE file from them.
Please tell me, now what do I do? I am at a lost at their instuctions, and going by my dealings with them, I think I can get help from you guys more accurately and quickly.
The server runs WHM/cPanel 11 with Apache 2 with mod_ssl. Full root access, but I am a Linux newbie.
anyone has got the steps to install this on centos 5? I have got it for centos 4 but censtos 5 having issues
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../lib64/libxslt.so: undefined reference to `xmlXPathContextSetCache'
collect2: ld returned 1 exit status
make[3]: *** [icecast] Error 1
make[3]: Leaving directory `/usr/src/redhat/BUILD/icecast-2.3.1/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/usr/src/redhat/BUILD/icecast-2.3.1/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/src/redhat/BUILD/icecast-2.3.1'
make: *** [all] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.1366 (%build)
What do people mean by profesional installation, for example if I have a forum professionally installed could I expect this to be with phpmyadmin and apache and the mod_rewrite, or are these more custom aspects?
View 5 Replies View RelatedI need to install a video script on my server and for this I need following addons on my server, how I can install these...
# mbstring [url]
# FFmpeg [url]
# Mplayer + Mencoder [url]
# Flvtool2 [url]
# Libogg + Libvorbis [url]
# LAME MP3 Encoder ([url]
I am using linux server with CPanel.
