Atom Servers
Nov 26, 2008i read that these consume less energy therefore lower cost to bandwith ratio ? is this true?
would it be able to run ffmpeg?
i read that these consume less energy therefore lower cost to bandwith ratio ? is this true?
would it be able to run ffmpeg?
What is your experience in using ATOM (320/330) servers? What are you using it for? Shared, reseller, VPS (HyperVM or other), backup, ...?
View 14 Replies View RelatedI am noticing that some hosts are now offering duel-core Atom Processors. Anyone have any experance with this (as a cPanel Hosting Server)
View 14 Replies View Relatedatom dedi's, performance etc..
Are these worth using?
I recently came across the pricing of Intel Atom powered Dedicated Servers which are as low as $39 (not managed of course) but, the hard disk space and bandwidth bundled with it is tempting.
I currently host a vBulletin Forum of mine of a 512 MB VPS and it performs fine but, I was thinking whether it would be better on an Atom as most are bundled with 2 GB of RAMs.
Anyone can help me out here - whether am thinking in the right direction or am entirely wrong in thinking this?
I was talking with a friend and neither of us has used both the atom 330 and the AMD Athlon 64 3500. Has anyone used both of these and did you notice with one performed better?
View 11 Replies View Relatedif anyone has had any experience with the new Atom servers offered by SingleHop. From what I read they seem somewhat promising but since it is new to the market from what I understand I don't really want to jump right into it head first.
Any reviews/comments would be helpful.
Should I upgrade form my VPS to the atom server.
The VPS
768 MB ram
40gb Disk
1 Xeon core 2.3 Ghz
Atom 330 Dual Core - 1.6GHz
250GB SATA
1024MB DDR2 667
2500GB Transfer
100Mbit burstable port
5 Usable ip's
The load on my vps sometimes get up to about 4 and I do notice a slight slowdown so any comments would be helpful.
Just wondering for anyone whos done a kernel compile on an Atom based machine, how long did it take?
View 1 Replies View Relatedif anyone has put Windows 2003 x64 on an Atom and installed a very light duty Exchange server on it...
I know the Atoms are not the most powerful thing in the world, but they are a cost effective and energy efficient alternative to past generation hardware.
Since the Atom benchmarks slightly better than a P4, I am wondering how it would hold up with an Exchange server.
I just got an Atom 330 and it shows that i have 4 Cores. Is it normal?
cat /proc/cpuinfo | grep Atom
model name : Intel(R) Atom(TM) CPU 330 @ 1.60GHz
model name : Intel(R) Atom(TM) CPU 330 @ 1.60GHz
model name : Intel(R) Atom(TM) CPU 330 @ 1.60GHz
model name : Intel(R) Atom(TM) CPU 330 @ 1.60GHz
Atom N330 with 2G RAM,
is it powerful enough for vBulletin or osCommerce 500 users online?
I am getting the following error in Plesk, on the Applications page:
"APS Catalog error: Unable to parse the ATOM content. DOMDocument::loadXML(): Opening and ending tag mismatch: hr line 5 and body in Entity, line: 6"
Clearing cache (as advised here: [URL] ....) - does not work, unfortunately.
As I noticed, the error started to occur right after Plesk was updated to v11.5.30_build115130819.13
Found this error in files:
/opt/psa/var/cache# vi d3b08b981b493e5687c45518970bc225-1024-0.cache
a:3:{s:3:"url";s:108:"http://catalog.marketplace.parallels.com/all-app.atom?obsolete=hide&pageSize=999999&order=%2Bname%2C-version";s:4:"time";i:1390479055;s:7:"content";s:166:"<html>
[Code] ....
In my browser, the API catalog URL gives the same "502 Bad Gateway" error: [URL] ....
I have a lot of questions here so if you can't answer them all I understand. even pointing me somewhere where I could get the answers would be appreciated; hardware sites focusing on server hardware, forums focusing on such, etc.
we plan to have three different types of servers:
- db server (self explanatory. mysql. for forums, mysql driven sites.)
- file server (lots of files around ~2-10MB, consistant 70mbps right now, but we want more room for upgrades. needs a LOT of storage room.)
- web server (lots of php files, but also static things like plain html, images, etc. also includes all misc services for the setup-- dns, etc.)
could I be given a rundown for which hardware each of the three should have? I don't need specifics, even just knowing that more ram is important here while cpu doesn't matter as much, or that the fastest disks available are a must, etc would all be valuable info for me. despite that, I certainly wouldn't mind specific hypothetical hardware configs.
for the database server I'm assuming the more ram the better. not entirely sure about the cpu? also not positive on disks...
for the fileserver, how much ram would be practical or useful? disk io will be an issue I'm because plenty of people will be pulling files at once so the disk needs to read from multiple places. scsi (and even raptors) are not an option as we need 750GB+ of space on a reasonable budget. more ram will take some load of of the disks, but how much is neccessary / reasonable?
for the web server I'm assuming cpu first, then ram, but it'll likely need less ram than the db server?
I'm more lost on the disks than anything. scsi on the fileserver is not an option under any circumstances due to $/GB. for the db & web server I'm willing to pay for scsi if the performance increase really does warrant the extra money, but I'd like to be convinced before shelling it out. if you have benchmarks geared at server hardware when it comes to disks I'd really appreciate it.
also, what's the best way to network these together when colocated? each one with a dual gigabit ethernet port and then the communications go to and from the router?
We send mail to another servers but we cant recieve mails another servers. We can't recieve with webmail and outlook.
I look logs but there is no error and our ip is not in blacklist.
there is the error in our server
[url]
linux cpanel centos 4.6
I was wondering if it is possible to cluster 2 web servers and 2 mysql servers with only one server working as load balancer.
I am planning to use LVS (ldirectord and heartbeat).
Let's say I have 3 IPs allocated to the load balancing server.
111.222.111.222 (Main IP)
111.222.111.223 (Web Load Balancing IP)
111.222.111.224 (MySQL Load Balancing IP)
If a connection is made to .223 it would pass the request to one of the web nodes.
If a connection is made to .224 it would pass the request to one of the MySQL nodes.
Is it possible to do this?
If not, can I run, for example, nginx on 223 IP address to provide forward proxy? (Then it would not be able to HA but the main point is to load balance so)
Also, what would be the best way to keep the data same on both web servers? This is a web cluster for a very high traffic forum with a lot of uploads every hour so it has to do real time synchronization. I heard that DRDB is only one way and not two way so I'm not going to be able to use this.
I am just colocating servers and managing them myself, and renting services off of them. In the future I would like to start offering dedicated servers as well. I am wondering if many companies do this, or if its more of a general practice to just setup as a reseller? The worst part that comes to mind is thinking of how to do billing for the bandwidth per month. With my setup I would only be offering flat bandwidth packages (like 2TB a month) but even so, I cant think of anyway to automate it so WHMCS knows if they went over, if so, how much, etc.
View 6 Replies View RelatedWhat would give me the best performance, to have many low end servers (core2duo) or a few high end servers (quad cores, dual quad cores).
Running everything from mysql queries to video streaming.
Is it possible or advisable?
View 8 Replies View RelatedAVR or Automatic Voltage regulation. How serious of a consideration is that to old Dell 2650 and Compaq 1850R servers?
Can I get by with a short daisy chain of simple APC battery backups mostly surge protection on one dedicated house breaker?
Wanted to start that thread today and just noticed that not only I wonders
[url]
So the question is: where can we rent servers with SAS drives in Europe?
2 or even 4 SAS HDDs (15k RPM) are really cute and we want them
Please, provide me with links with nice offers like:
[url]
[url]
(New prices are not good - [url]
netrouting.eu (only desktop CPUs atm)
...
I have recently purchased new hosting with a new supplier which uses a different kind of control panel - cpanel. So before I transfer our organisations website across I want to spend some time playing.
We purchased our domains with 123 reg and the host we have been using for a while is namesco our new hosting package is with neither of these suppliers.
Before I transfer our primary domain to the new host I'm doing a dummy run with one of our other domains and that's where i've come up with this name servers question.
The new host gave me the name of their 2 name servers.
But when I went to my control panel at 123 reg to change the name servers they were not using namesco name servers they were using 123's.
Do I want to change the name servers to the new name servers or not? I'm a bit confused as i was expecting to see namesco names servers?
I'm currently using the ones my registrar offers (Domain Site). But it just happened that they had an outage (they were down for a few minutes).
I'm looking for a more reliable solution. I could get dedicated servers where I'm hosting my servers, and I could also get services (like UltraDNS).
Is that possible to have ns1.mydomain.com ns2.mydomain.com
Two differnet severs that means each having two different IPS?
If so how?
the reason I ask is that I see a lot of hosting companies have thousands of users and many severs but they all ask their customers to point only to two name server ns1 and ns2
If you are located in the UK: Which manufacturers/sellers for dedicated servers can you recommend?
So far, I am sympathising with Dell. Any other good opportunities in a similar price range?
i want to run a new server with centos with whm/cpanel,
i look for many articles about it on the internet,
i find some points for the setting,
install centos
install whm/cpanel
install csf
configure whm
change the ssh port number
tune http
tune mysql
set backup
Say you are renting 2 (or more) dedicated web servers. How do you go about getting it so that www.yourdomain.com goes to one of the web servers? Do you need a 3rd server to redirect the request, or what?
View 2 Replies View Relatedif anyone had a recommendation on where to buy a decent used server (Just for DNS Purposes). Anywhere other than ebay? Anywhere local in the Greater Seattle/Everett/Tacoma, WA Area?
View 7 Replies View RelatedDo you know any companies in the UK who allow at least 5-10 IP's?
View 6 Replies View RelatedCannot see my servers from office but sites are up and running. Servers are at AtlantaNap. Maybe weather?
Tracing route to mysite.com [xx.xx.xx.xx]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 192.168.1.1
2 30 ms 30 ms 30 ms 10.21.1.1
3 58 ms 30 ms 30 ms at-4-3-0-1710.CORE-RTR1.PORT.verizon-gni.net [64
.222.212.44]
4 44 ms 44 ms 44 ms POS3-0-0.GW12.BOS4.ALTER.NET [208.214.102.193]
5 44 ms 44 ms 44 ms 0.so-3-0-0.XL2.BOS4.ALTER.NET [152.63.22.182]
6 63 ms 63 ms 137 ms 0.so-2-3-0.XL2.ATL1.ALTER.NET [152.63.101.49]
7 63 ms 63 ms 63 ms 0.so-7-0-0.XR2.ATL1.ALTER.NET [152.63.86.102]
8 63 ms 63 ms 63 ms 194.ATM7-0.GW9.ATL1.ALTER.NET [152.63.85.109]
9 63 ms 63 ms 64 ms internap-gw.customer.alter.net [63.122.231.198]
10 64 ms 65 ms 63 ms border2.tge-4-1-bbnet2.acs002.pnap.net [64.94.0.
83]
11 64 ms 63 ms 64 ms giglinx-13.border2.acs002.pnap.net [70.42.180.15
8]
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
Does anyone know of an FTP client that lets you transfer files directly between one server and another (to avoid downloading/uploading)? Preferably that runs on Linux!
View 8 Replies View Related