Would This Setup Be Sufficient For Our Website

Aug 9, 2007

We are moving our website to an in-house server that's going to be on the windows server 2003 OS. However, I am concerned that our current connection speed may not be enough to promptly serve our customers.

We currently have 10 megs download, 512k upload.

Our server is the following:

Quad-core Xeon at 1.8
4 gigs of ram
2x 15k rpm 160 gig hard drives in raid 1 configuration

Anyways, at any given time we may have up to 10 people on our website. Our pages average between 60KB and 120KB each.

Would this system and internet connection support our needs? Do we need to upgrade the internet connection? If so what would you recommend?

View 4 Replies


ADVERTISEMENT

Web Managed Procurve Sufficient For Important Edge Switch

Jul 3, 2007

I've been tasked with buying a "good" edge switch for my company's datacenter presence. After a full day of searching around and reading, I think I have decided on a procurve. The question now is what is sufficient for our needs.

We currently have 8 machines and will possibly add another 3 or 4 before the end of the year. We're running gigabit everywhere at the moment, and at bare minimum would need gigabit to 3 of our servers currently. Hopefully we will need gigabit to 4 or 5 servers by the end of the year.

Our website is of very high value to us, but we're also very much in the startup mentality of pinching pennies.

My question is if a web managed switch like the procurve 1800-24g has some performance/reliability downsides compared to like a 2810-24g managed switch. Looks like the 1800-24g can be had for about $400, and the 2810-24g for about $1300.

Searching around this forum, I saw a few references to the 1800-24g where the comment was that it would be great for a lower throughput need. Can anyone tell me why this would be insufficient for higher demands?

Our peak sustained throughput on the uplink to the hosting provider's router so far has been about 120mbps, and we hope to double this by end of year (and grow beyond).

If possible, I would like to be forward looking to the point where we will want to spend more money and have redundant switches in place to protect uptime. I do see that the 2810-24g is listed as stackable, but reading /rnd/pdfs/ProCurve_Stacking_Technology.pdf on HP's website (newbie not allowed to link in posts) seems to me to say that I wouldn't have any options for automatic failover to a slave switch with it. Does anyone know if this is correct?

Having a failover hot switch ready is not a deal breaker since we're only looking at switches that will give us high confidence in the first place.

How about comments on the wisdom of buying something like this used? My gut instinct is that I should avoid used since this is a high performance single point of failure for our entire internet presence. But I don't know how rock solid I should expect a used procurve to be.

In case you are wondering, our technical needs from the switch our modest. I will probably set up a vlan for each of our load balancing clusters to contain multicasting, but the only other feature I know of so far that I desire is the snmp reporting data.

I guess the root question is - would a web managed procurve leave me at a disadvantage for row performance or reliability compared to a full managed procurve?

View 4 Replies View Related

Setup Name Server For A Website ?

Aug 24, 2007

I've been setting up name server for my website. I'm using Centos 5, but never get it works.

Here what i have done so far:
yum install named
Then i create named.conf in /etc

PHP Code:

options {        version "Version Secured";        directory "/var/named";        /*         * If there is a firewall between you and nameservers you want         * to talk to, you might need to uncomment the query-source         * directive below.  Previous versions of BIND always asked         * questions using port 53, but BIND 8.1 uses an unprivileged         * port by default.         */        // query-source address * port 53;        recursion no;};logging {        category lame-servers { null; };};//// a caching only nameserver config//controls {        inet 127.0.0.1 allow { localhost; } keys { rndckey; };};zone "." IN {        type hint;        file "named.ca";};zone "localhost" IN {        type master;        file "localhost.zone";        allow-update { none; };};zone "0.0.127.in-addr.arpa" IN {        type master;        file "named.local";        allow-update { none; };};include "/etc/rndc.key";zone "glueg99.com" { type master; file "/var/named/glueg99.com.db"; }; 

I created glueg99.com.db in /var/named

PHP Code:

     $TTL 14400@       IN      SOA     ns1.glueg99.com.      root.glueg99.com. (                                                2007081300                                                14400                                                3600                                                1209600                                                86400 )glueg99.com. 14400   IN      NS      ns1.glueg99.com.ftp     14400   IN      A       209.99.56.22localhost       14400   IN      A       127.0.0.1mail    14400   IN      A       209.99.56.22pop     14400   IN      A       209.99.56.22glueg99.com. 14400   IN      A       209.99.56.22www     14400   IN      A       209.99.56.22glueg99.com. 14400   IN      MX      10 mailglueg99.com. 14400   IN      TXT     "v=spf1 a mx ip4:209.99.56.22 ?all" 

When i start 'named' (service named restart), it tells me these errors:

PHP Code:

[root@v named]# service named restartStopping named:                                            [FAILED]Starting named:Error in named configuration:zone localhost/IN: loading master file localhost.zone: file not found_default/localhost/IN: file not foundzone 0.0.127.in-addr.arpa/IN: loading master file named.local: file not found_default/0.0.127.in-addr.arpa/IN: file not foundzone glueg99.com/IN: loaded serial 2007081300                                                          [FAILED] 

My website has been down and i am so frustrate about it. I don't like to use free NS from other sites, i'd rather set up my own NS.

View 6 Replies View Related

Is It Time To Setup A 'don't Use Hotmail Advisory Website'

May 15, 2008

Hotmail doesn't work. The email filtering technologies are still broken 18 months after the original problems were found with their implementation. And now it looks like they've stopped supporting it.

Seriously, does anyone know if the email filtering team at Microsoft has just given up on responding to requests and complaints? We've just deployed two new servers and both are blocked for delivering email to clients Hotmail/MSN/Live.com accounts.

The following steps have been taken:

1. Our DNS has been tested and checked using DNSstuff.com services.

2. Our server IP addresses checked to ensure they do not appear in any blacklists.

3. rDNS correctly setup for hostnames and mailserver names.

4. All our email is signed using DomainKeys.

5. All our domain names have published SPF records.

6. All our domain names have valid abuse@ and postmaster@ email addresses.

7. We have emailed senderid@microsoft.com notifying them as requested on postmaster.msn.com of our published SPF records.

8. We have even completed the senderid support form providing further notification here:
[url]

9. I have contacted the technical support team using the contact form on [url] witn absolutely no success.

Two weeks later I've made no progress whatsoever beyond receiving a request to complete a survey rating the non-existent support I have received. (No human has responded to any of my messages) And all our messages to Hotmail are still disappearing into the email filtering black-hole.

At this point I'm starting to wonder if Hotmail is even usable as an email service anymore. I doubt many people will be bothering to jump through all the hoops I am to resolve this issue. I dread to think how much legitimate email is getting caught up in the Microsoft email filtering black-hole - never providing any notification or information to senders their messages were not delivered.

Meanwhile, our email arrives perfectly in Yahoo/Gmail who both pass our SPF records and DomainKeys signatures. Oh, and we're not engaging in any email marketing practises (i.e. spam).

View 14 Replies View Related

Apache :: Configuration To Setup Password For Website

Jul 8, 2013

I want to setup a password for a website running on Ubuntu server, and find Apache can be used. It is implemented by config httpd.conf file and .htaccess file.

So I want to ask:

1. In this case, the password is setup for a path on the server configured in httpd.conf file. Like in the following example:

Code: <Directory "/var/www/html/MySite">

The password is setup for the path to Mysite,right?

2. If my content of website is not stored under /var/www folder, I cannot use this way to setup a password for website, right? May use PHP instead?

View 1 Replies View Related

Setup Reverse (PTR) Record On A Website With An External Mailserver

Jul 3, 2009

I don't know I was clearly enough in the title, the problem is that one of my clients has his own mailserver, I host only his website, and he uses a local server for emails.

For the rest of websites which are hosted on this server, everything is ok, intodns.com reports this message :

You have reverse (PTR) records for all your IPs, that is a good thing.

But for the website which has the mailserver on another server it fails the PTR test on intodns.com

ERROR: No reverse DNS (PTR) entries. The problem MX records are:
2.218.77.82.in-addr.arpa -> no reverse (PTR) detected
You should contact your ISP and ask him to add a PTR record for your ips

I have checked Tailor Made Servers control panel, and I have the option to set Reverse DNS for every IP alocated on my server, and for now all the websites (30) shares the same IP ..

View 2 Replies View Related

DNS Setup - Hosting Website Internally - Email Externally

Jul 1, 2008

IIS 7.0 - I host several websites. On one of them, the email is hosted externally and not through my exchange server. I have added an MX record to point to the mail server for this domain, but I still get an error when I attempt to send an email from within my local area network. There are no problems with emails generated outside my network, but for emails generated to this domain from within my network, I get the following error:

The e-mail account does not exist at the organization this message was sent to. Check the e-mail address, or contact the recipient directly to find out the correct address.
<mail.<mydomain>.com #5.1.1>

Incidentally, the <mydomain> value does not match the domain for this email domain.

Instead it is the primary domain that I host.

I know that this must be a DNS issue, but I'm not sure how to correct.

View 4 Replies View Related

Plesk 11.x / Linux :: Setup Testing WORDPRESS Website Without DNS Change

Jan 6, 2014

I'm pretty new to Plesk and would like to setup a testing wordpress website without changing DNS yet. I assume I need to create a webspace for it. But do I use actual domain or an IP address? Wordpress ties up to the domain as far as I know.

View 9 Replies View Related

Dedicated Or Reseller Setup With Virtualization Or Decent Chroot Setup

Jul 31, 2008

As my clients' needs expand, they're asking for chroot ssh/sftp setup. I'm currently on a dedicated Linux setup but don't really have the time to set up a whole new box with full virtualization or investigate a full chroot solution (baby on the way), and to be honest it would be less hassle to move to a new provider than worry about down time with sites.

What I'm looking for:

- linux hosting
- hosting for 30+ accounts, some with several domains
- at least 6 IP addresses for SSL certs
- each account in a full chroot environment (ssh/sftp/ftp) so they can't poke around each others' files, or each account set up in a virtual machine setup (ie: openvz)
- maildir
- spamassassin
- php 5, mysql, perl 5.8.8
- suexec apache would be nice

View 3 Replies View Related

How To Point Www.website.com To Website.com (or Vice Versa)

May 3, 2008

If I type google.com in my address bar, it forwards me to www.google.com. This is not happening for my website right now. I think its a good idea to do this, since then search engines will have only 1 main URL for the website to index.

My question is:

How do I implement this? I think this may involve mucking with CNAME settings...

View 2 Replies View Related

DNS Setup And FTP Setup [LXAdmin/HyperVM]

Aug 1, 2008

I have learnt it is harder to setup than I initially expected (since I have just moved from a shared hosting service). I am in need of some help setting up my DNS servers, as I am very confused. Here is most of the info I know:

1) I am running HyperVM

2) I've installed LXAdmin

3) I own the domain (purchased from xeodomains.com) runemart.com

4) My VPS hostname is: vps.runemart.com

5) I know my IP

6) My host has said:

'For VPS customers that have a HyperVM login you can now host forward DNS on the DNS servers rdns1.vaserv.com (US)rdns2.vaserv.com (UK'

And I am unsure what this means/how to do it.

I am not sure if I need some more information to set up my DNS, however I am sure that I can get it if I do.

Now, my questions begin. Firstly, I need to point my domain - runemart.com - somewhere. I believe I need to set up my DNS via HyperVM or LXAdmin so that they are something like: ns1.runemart.com and ns2.runemart.com. Though, is this correct? Am I able to set up my own actual domain name servers, or will my domain have to point at something like rdns2.vaserv.com?

If anyone can assist me in this I would be very greatful, as I am waiting to get my website running. This is all I will ask for now, I will take it one step at a time =).

View 14 Replies View Related

How To Redirect.. Www.website.com -> Www.website.com/forums

May 15, 2009

I want my users to be redirected directly to my forum

so when they type in www.mywebsite.com it will redirect instantly to www.mywebsite.com/forums

I know this can be done on Cpanel... any other ways?

View 7 Replies View Related

NAS Setup

Jul 10, 2009

I am currently researching and evaluating Network Attached Storage systems and was wondering whether anyone out there has had previous experiences (good or bad) with any particular setup?

I am particularly curious to know:

1- what kind of a performance hit I can expect when data is stored on a NAS and accessed via ethernet over iSCSI as opposed to regular SATA or SCSI.

2- what pre-built NAS system would you recommend for a system that requires about 8 TB of disk space for file data and needs to have 100% uptime? I've been looking at: [url]

However I don't know what sort of limitations this hardware offers as far as simultaneous disk reads/writes go.

View 14 Replies View Related

VPN Setup

Apr 27, 2009

I need to setup a vpn for a customer so they can access a development server. I'm running a Tomcat server and an Oracle database that they would need access to, both port 80(or 8080) and port 1521. This needs to be secured as there is customer data that needs to be protected.

This server will be part of our existing servers we rent from Pacificrack. I really would appreciate any suggestions as the best way to do this, short of buying my own cisco or checkpoint firewall with vpn.

View 2 Replies View Related

How To Setup SAN

Nov 1, 2009

how to setup SAN either on Windows or Linux?

View 3 Replies View Related

VPS And VPN Setup

Apr 22, 2009

We like to setup VPS and VPN accounts on our new server Centos 5.2,

Any recommendations for appropriate programs and web hosting panels?

View 5 Replies View Related

Setup For IIS 7.0

Oct 19, 2008

I am currently using windows server 2008 standard to host my website. I set my website up with IIS and when i type in localhost i can see it. But, if i type i my ip adress I see my router's config page. I use dyn dns updater which takes my ip adress and uses that to update my website. But, when I go to my website I see my routers config page, not my website.

View 2 Replies View Related

SSL Setup

Apr 8, 2008

I have no experience in this topic but I need a secure connection with SSL. I made some research but not everything is clear.

I need a dedicated IP to make SSL possible.

Do I need an SSL certificate as well or it is only important to make the customers happy? Does SSL works without certificate?

I ask it because some company charge money for the SSL/month and pluss charge money for certificate/year.

What does it mean if the certificate is outdated? The SSL connection works fine, isn't it? I ask it strictly technicaly.

View 7 Replies View Related

How To Setup A VPN

Apr 14, 2008

Hello I have my own web server. Due to some sites being blocked in where I currently reside (no not porn, just websites like flickr, orkut..etc). I have seen some programs that you can download for free and they connect through a VPN but dramatically slow down your connection and filled with ads. It did work. However I want my own setup and VPN

View 6 Replies View Related

DNS Setup

Apr 16, 2007

We are currently setting up a VPS server, which will be used for a specific client portfolio that we are aquiring from another company. This is a Linux based server with WHM/Cpanel.

However, we wish to set up DNS in the best possible way, since we need to host DNS for some vital ISP services also. I gather this probably means using a combination of DNS on the VPS server itself, as well as one or more other DNS servers in other physical locations. The VPS server itself is located in Amsterdam, while most clients are here in Norway - thus ensuring reliability for local clients is the most important consideration.

Now some key questions:

- How important is the physical location of the DNS servers, and where should these ideally be located?

- Is a cluster solution the way to go - and is this supported by WHM/Cpanel?

- We have Linux and Windows based servers on our local network; could these be used for DNS also? If so, tips on software needed?

View 13 Replies View Related

Setup Ns1 & Ns2

Sep 11, 2008

I got a dedicated.

And 2 Ips.

I want setup ns1 & ns2 for my server.

how to ?

I use WHM.

View 4 Replies View Related

Ns1 Vs Ns2 Setup On Different DNS

May 24, 2008

i am currently experimenting DNS with my 2 ips (each with separate servers spread over 2 geographic locations) and my zone file maps these IPs to ns1.domain.com and ns2.domain.com.

Both of my servers run DNS and with zone entry for my domain name. But when i stop the dns server on first IP (ns1) the second dns server (ip2) not working or resolving. Both are master servers.

My question is if first server DNS fails, the second DNS should resolve? why it is not working. i guess that is reason why domain registrars ask for 2 name servers. if one fails other works as backup??

how do i setup these? should i setup a slave or something?

View 5 Replies View Related

Csf / Lfd Setup

Feb 24, 2007

My environment:

cpanel / whm
shared and reseller accounts (300+ domains)
secure only ports for cpanel/whm/webmail

Problem:

Seems like too often people get blocked out of firewall for ftp, webmail, pop3 or webmail. I'm not sure what to do without sacrificing good security measures.

Below is my configuration for CSF (chirpy's firewall)

Code:
###############################################################################
# Copyright 2006, Way to the Web Limited
# URL: http://www.waytotheweb.com
# Email: sales@waytotheweb.com
###############################################################################

# Testing flag - enables a CRON job that clears iptables incase of
# configuration problems when you start csf. This should be enabled until you
# are sure that the firewall works - i.e. incase you get locked out of your
# server! Then do remember to set it to 0 and restart csf when you're sure
# everything is OK. Stopping csf will remove the line from /etc/crontab
TESTING = "0"

# The interval for the crontab in minutes. Since this uses the system clock the
# CRON job will run at the interval past the hour and not from when you issue
# the start command. Therefore an interval of 5 minutes means the firewall
# will be cleared in 0-5 minutes from the firewall start
TESTING_INTERVAL = "5"

# Enabling auto updates creates a cron job called /etc/cron.d/csf_update which
# runs once per day to see if there is an update to csf+lfd and upgrades if
# available and restarts csf and lfd. Updates do not overwrite configuration
# files or email templates. An email will be sent to the root account if an
# update is performed
AUTO_UPDATES = "0"

# Ethernet device setting is taken from the shared IP address in
# /etc/wwwacct.conf but can be overridden here (e.g. "eth0")
#
# If you have multiple ethernet NICs that you want to apply all rules to, then
# you can set the following to the interface name immediately followed by a
# plus sign. For example, eth+ will apply all rules to eth0, eth1, etc
ETH_DEVICE = ""

# Unfiltered ethernet devices in a comma separated list (e.g "eth1,eth2")
ETH_DEVICE_SKIP = ""

# Lists of ports in the following comma separated lists can be added using a
# colon (e.g. 30000:35000).

# Allow incoming TCP ports
TCP_IN = "20,21,22,25,53,80,110,143,443,465,953,993,995,2083,2087,2095,2096,22305"

# Allow outgoing TCP ports
TCP_OUT = "20,21,22,25,37,43,53,80,110,113,443,587,873,953,2087,2089,2703"

# Allow incoming UDP ports
UDP_IN = "20,21,53,953"

# Allow outgoing UDP ports
# To allow outgoing traceroute add 33434:33523 to this list
UDP_OUT = "20,21,53,113,123,873,953,6277"

# Allow incoming PING
ICMP_IN = "1"

# Allow outgoing PING
ICMP_OUT = "1"

# Block outgoing SMTP except for root, exim and mailman (forces scripts/users
# to use the exim/sendmail binary instead of sockets access). This replaces the
# protection as WHM > Tweak Settings > SMTP Tweaks. This will block hosting
# clients from using your server as an SMTP relay
SMTP_BLOCK = "0"

# If SMTP_BLOCK is enabled but you want to allow local connections to port 25
# on the server (e.g. for web scripts) then enable this option too
SMTP_ALLOWLOCAL = "0"

# If this is a MONOLITHIC kernel (i.e. it has no LKM support, e.g. a VPS) then
# set this to 1. Because of the nature of monolithic kernels, it's not easy to
# determine which modules have been built-in, so some functionality may not be
# available and this firewall script may not work.
#
# One example is if the ip_conntrack and ip_conntrack_ftp iptables kernel
# modules are not available. If this happens, FTP passive mode (PASV) won't
# work. In such circumstances you will have to open a hole in your firewall and
# configure the FTP daemon to use that same hole. For example, with pure-ftpd
# you could add the port range 30000:35000 to TCP_IN and add the following line
# to /etc/pure-ftpd.conf (without the leading #):
# PassivePortRange30000 35000
# Then restart pure-ftpd and csf and passive FTP should then work
MONOLITHIC_KERNEL = "0"

# Enable logging of dropped connections to blocked ports to syslog, usually
# /var/log/messages
DROP_LOGGING = "1"

# Enable logging of dropped connections to blocked IP addresses in csf.deny or
# by lfd with temporary connection tracking blocks
DROP_IP_LOGGING = "0"

# Only log reserved port dropped connections (0:1023). Useful since you're not
# usually bothered about ephemeral port drops
DROP_ONLYRES = "0"

# Commonly blocked ports that you do not want logging as they tend to just fill
# up the log file. These ports are specifically blocked (applied to TCP and UDP
# protocols) for incoming connections
DROP_NOLOG = "67,68,111,113,135:139,445,513,520,1026,1027,1234,1433,1434,1524,3127"

# Enable packet filtering for unwanted or illegal packets
PACKET_FILTER = "1"

# Log packets dropped by the packet filtering option PACKET_FILTER. This will
# show packet drops that iptables has deemed INVALID (i.e. there is no
# established TCP connection in the state table), or if the TCP flags in the
# packet are out of sequence in the protocol exchange.
#
# If you see packets being dropped that you would rather allow then disable the
# PACKET_FILTER option above by setting it to "0"
DROP_PF_LOGGING = "0"

# Enable verbose output of iptables commands
VERBOSE = "1"

# If you wish to allow access from dynamic DNS records (for example if your IP
# address changes whenever you connect to the internet but you have a dedicated
# dynamic DNS record from the likes of dyndns.org) then you can list the FQDN
# records in csf.dyndns and then set the following to the number of seconds to
# poll for a change in the IP address. If the IP address has changed iptables
# will be updated.
#
# A setting of 600 would check for IP updates every 10 minutes. Set the value
# to 0 to disable the feature
DYNDNS = "0"

# If you wish to allow access from all IP's that have authenticated using POP
# before SMTP (i.e. are valid clients) then you can whitelist them using this
# option which checks for IP addresses in /etc/relayhosts which last for 30
# minutes in that file after a successful POP authentication
#
# A setting of 60 would update IP's every 1 minute. Set the value
# to 0 to disable the feature
RELAYHOSTS = "0"

# Enable this option if you want to allow incoming connections from reserved
# ports. Normally, only DNS connections have the same SRC and DST port (53)
# and any other connections should have a SRC port > 1023. On *nix systems this
# rule is generally adhered to and reserved ports are not allocated as SRC
# ports. However, other notable OS's appear to ignore this and allocate them at
# will. This means it's possible that users may come in on reserved ports, so
# enable this option if you want to allow them to, or disable it if you want to
# be strict
ALLOW_RES_PORTS = "1"

# Limit the number of IP's kept in the /etc/csf/csf.deny file. This can be
# important as a large number of IP addresses create a large number of iptables
# rules (4 times the number of IP's) which can cause problems on some systems
# where either the the number of iptables entries has been limited (esp VPS's)
# or where resources are limited. This can result in slow network performance,
# or, in the case of iptables entry limits, can prevent your server from
# booting as not all the required iptables chain settings will be correctly
# configured. The value set here is the maximum number of IPs/CIDRs allowed
# if the limit is reached, the entries will be rotated so that the oldest
# entries (i.e. the ones at the top) will be removed and the latest is added.
# The limit is only checked when using csf -d (which is what lfd also uses)
# Set to 0 to disable limiting
DENY_IP_LIMIT = "100"

View 0 Replies View Related

DNS Setup For VPS

Oct 2, 2007

initial WHM DNS setup i tryed at first with whm but it seems like it messes the nameservers IPs so i just put some entries manually I got all name servers IPs and shared IP setup right but i may be have some problems with DNS zones
here is my named config

---------------------------------------------------------------------------
view "internal"
{
/* This view will contain zones you want to serve only to "internal" clients
that connect via your directly attached LAN interfaces - "localnets" .
*/
match-clients { localnets; };
match-destinations { localnets; };
recursion yes;

zone "." IN {
type hint;
file "/var/named/named.ca";
};

// include "/var/named/named.rfc1912.zones";
// you should not serve your rfc1912 names to non-localhost clients.

// These are your "authoritative" internal zones, and would probably
// also be included in the "localhost_resolver" view above :

zone "ns1.xxx.com" {
type master;
file "/var/named/ns1.xxx.com.db";
};

zone "ns2.xxx.com" {
type master;
file "/var/named/ns2.xxx.com.db";
};

zone "main.xxx.com" {
type master;
file "/var/named/main.xxx.com.db";
};

zone "xxx.com" {
type master;
file "/var/named/xxx.com.db";
};
};

view "external"
{
/* This view will contain zones you want to serve only to "external" clients
* that have addresses that are not on your directly attached LAN interface subnets:
*/
match-clients { !localnets; !localhost; };
match-destinations { !localnets; !localhost; };

recursion no;
// you'd probably want to deny recursion to external clients, so you don't
// end up providing free DNS service to all takers

// all views must contain the root hints zone:
zone "." IN {
type hint;
file "/var/named/named.ca";
};

// These are your "authoritative" external zones, and would probably
// contain entries for just your web and mail servers:

// BEGIN external zone entries

zone "main.xxx.com" {
type master;
file "/var/named/main.xxx.com.db";
};

zone "xxx.com" {
type master;
file "/var/named/xxx.com.db";
};
};

--------------------------------------------------------------------------
main.xxx.com is my hostname
I still can't ping main.xxx.com or xxx.com but my name servers are ok
what exactly the problem?

View 6 Replies View Related

DNS Setup

May 8, 2007

All the domains on my server are using my own hosted nameservers, but now I have a new domain where I need to use a 3rd party DNS (gratisdns.dk).

The settings on gratisdns.dk wasn't a big deal, but what on my own server?

I created the domain through whm and it is set to use my own DNS just like the other domains. How do I change it to use the DNS from gratisdns.dk?

This is how my zonefile looks like:

Quote:

; Zone file for mynewdomain.dk
$TTL 14400
@ 86400 IN SOA ns1.myownns.com. email.mydomain.com. (
2007050801 ; serial, todays date+todays
86400 ; refresh, seconds
7200 ; retry, seconds
3600000 ; expire, seconds
86400 ) ; minimum, seconds

mynewdomain.dk. 86400 IN NS ns1.myownns.com.
mynewdomain.dk. 86400 IN NS ns2.myownns.com.

mynewdomain.dk. IN A 72.xxx.xxx.xxx

localhost.mynewdomain.dk. IN A 127.0.0.1

mynewdomain.dk. IN MX 0 mynewdomain.dk.

mail IN CNAME mynewdomain.dk.
www IN CNAME mynewdomain.dk.
ftp IN A 72.xxx.xx.xxx

I guess I don't need the A record and Cname here since I set that up at gratisdns.dk?

How should it look and are there anything else I need to change on my server?

View 6 Replies View Related

DNS Setup

Jul 23, 2007

i 've tried to setup dns server. i configured dns as well. but it's not reachable by the domain. would you help me to setup this dns settings correctly. will my nameservers would be NS1.mydomain.net and ns2.mydomain.net if i set it up in windows server 2003?
i can't login through ftp programs. even when i type my login details. how to change the permission on the server.

View 2 Replies View Related

Setup DNS

Jul 8, 2007

Does anyone know of a tutorial that can teach me to setup a dns on my windows server for apache so instead of using an ip address i can use a domain and it would go to my website.

View 14 Replies View Related

Php Setup

Jul 4, 2007

I am trying to run my first PHP 5 application that I bought from SitePoint called "Using Ajax with your web applications" but am having lots of problems trying to configure it to run on Windows XP and IIS.

I have installed Apache2.2 and PHP php-5.2.3-win32-installer.msi

I have made some changes and the last error message I got yesterday was this:

No input file specified.

I have tried to set the doc_root path in the .ini file to C:inetpub/wwwroot/finance/www and also delete it as I saw in some forums but to no avail.

I have set my IIS alias to the "www" folder since it contains the index.php file. It also contains another file I do not know what it is used for (.htaccess) and I left it alone.

[url]

Today, when I tried to open the file again in IE,

[url]

I got the following error:

Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator, claudiop@kmrsoftware.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.

More information about this error may be available in the server error log.

I would appreciate very much if someone could help me to sort this problem out. What do I have to do to get the server back and running and get it to work with this PHP application?

View 6 Replies View Related

IIS 7 Setup And Use

Mar 5, 2007

I am having some trouble correctly setting up IIS 7 on Vista Business.

I have used the standard resources and web casts from Microsoft to get IIS set up to run asp/asp.net applications. When I run them from the localhost they run perfectly and everything seems to be fine. What I am having trouble with is editing and updating websites based in the inetpub>wwwroot folder.

I keep getting security messages and am unable to save edited file directly from studio.

Is there a plain English (yes I am new to server management) tutorial to getting IIS 7 to work fully so that I can develop ASP.NET applications at home.

View 3 Replies View Related

Setup

Jul 22, 2007

There are a lot of tense people here lately..and I'll withhold the name the guilty party in this until I see when my next billing date is..should be interesting indeed. It is clear some of you need a good laugh.

Silly me..I was always under the impression when a "VPS has been setup" message via email...it was actually setup. Nope.

Actually..the vps is *NOT* setup. I have to wait another 24-48 hours for it to actually work. Mind you..I'm not talking about DNS at all..the fact remains..I have a setup email..and it ain't setup at all. No placeholder page via http..no power panel..no remote desktop..all tried with a raw ip address. The DNS has been setup, though. I'm going to keep a close eye on these folks for further fun.

Sadly..my experience has been deplorable with people that play games like this on day one. In fact..I've never had day 30 with any of them.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved