At work we host our own website, thing is that from work we can't go to our websit simply by going to [url]we have to go to 192.168.2.13 to see our website. Any Ideas on what's up? the rest of the world can go directly to the website.
View 5 RepliesFor some reason one of my websites no longer works when I use www in the address. For example [url] works yet [url]does not.
I get this error in ie "Internet Explorer cannot display the webpage".
what I can do to get it working again?
I have a windows server. Hosted one website. Someone did the configuration for me, and everything works fine.
Now i have a new website. I added the files in a new folder under wwwroot (so there're 2 folders in wwwroot now). Then also added it inside IIS FTP Sites and Web Sites (but not sure if the settings are correct). As for the nameservers, i use back the same ones (as the old website).
I can view the files in the server, but i cannot enter it via browser.
If I type google.com in my address bar, it forwards me to www.google.com. This is not happening for my website right now. I think its a good idea to do this, since then search engines will have only 1 main URL for the website to index.
My question is:
How do I implement this? I think this may involve mucking with CNAME settings...
I want my users to be redirected directly to my forum
so when they type in www.mywebsite.com it will redirect instantly to www.mywebsite.com/forums
I know this can be done on Cpanel... any other ways?
im using centOS 5 with webmin in my vps.
im installing webmin and do this: [Apache Webserver] / select [Default Server]
and my website work fine ,
but when i check my web site for example
[url]not working!
[url]Work fine!
how i can solve problem
work with www and without www.
I'm having exec cgi issues,
CentOS 5.3 x86_64, Linux, Apache/2.0.63,
cPanel 11.24.4-R36167 - WHM 11.24.2 - X 3.9
Error is,
[an error occurred while processing this directive]
If I "uncheck" IncludesNOEXEC in Apache Global Configuration the error disappears, but the SSI doesn't work. If I check it the error is there, but the SSI works.
Here's what I have done so far,
Through WHM,
Main >> Service Configuration >> Apache Configuration,
Pre Main Include, Pre VirtualHost Include, Post VirtualHost Include,
I added,
Options +Includes
AddType text/html .htm
AddType text/html .html
AddOutputFilter INCLUDES .htm
AddOutputFilter INCLUDES .html
Options +ExecCGI
AddHandler cgi-script .cgi .pl
I also added this to the httpd.conf
<Directory "/">
Options +ExecCGI FollowSymLinks Includes IncludesNOEXEC Indexes -MultiViews SymLinksIfOwnerMatch
AllowOverride All
</Directory>
Options +ExecCGI
AddHandler cgi-script .cgi .pl
Then I tried,
Options +ExecCGI
AddHandler cgi-script .cgi .pl
in the .htaccess file
I got a vps and I dont really understand how ram works but my sites arent really that big yet actually not at all at least teh ones on the vps. I am using directadmin as the panel.
I am using 279mb.
I installed GD via yum. Yet I cant get it to work I get all kinds of error's like libpng is missing then I got libXpm is missing, then freetype is missing yet all the libs exsist,
View 4 Replies View RelatedAfter spending nearly 4 days trying to get ftp working on my server i still haven't achieved it. I got a server with a default install of plesk and cent os 4. I update to 8.2 and when i first go to try ftp it says "server closed connection" on my ftp client.
So then i tried updating 8.2 again and the installer failed. So i tried manually installing both proftpd and pureftpd via ssh and yum and it fails to install. I've also restarted the server a few times. I've tried logging in with every single username/domain/i.p. assigned to the server. and i've had no luck.
I installed Lighttpd + PHP 5.2.1 with FastCGI
Any php page that starts with <?php is working fine..
but when the page starts with only <?, it does not work
how does SSH work and really what is it.
This is my knowledge, I may be wrong or right:
There are two ways of controlling your server, through control panel and through SSH, now SSH is where you type in codes to control your server.
Now from what I know you can't login to SSH alot due to security reasons.
I was wondering, if I have a forum can I login to SSH everyday to back up the database?
Whenever I tried to upload large files to my server it restarts the upload again and again and never actually uploads. It just keeps overwriting the previous file. I don't get any errors? It just automatically reuploads and overwrites the files everytime.
View 2 Replies View RelatedMy site is under DDOS attack. I run this command
netstat -an | grep :80 | grep ffff | awk '{print $5}' | cut -f 4 -d : | sort | uniq -c | sort -n | tail -10
And find a lot of IP that are attacking. After that, i run
iptables -A INPUT -s xxx -j DROP
to block IP, and
service iptables save
service iptables restart
But when i run netstat command abouve, i found IP are attacking still available, it seem iptables don't block it?
I would like to know how servers work, like how to build, set up, and how they work, what software is in them? Also could I own a server and send them to a data center and host them there?
Also a little infomation on Data Center. Could you share me some knowlage.
some clarification with regards to Reverse DNS.
An example ip: xx.xxx.xxx.xx is owned by A Company via a DC. The they have their name allocated to the netname and description when i look up their ip address.
I have my ip xx.xxx.xxx.xx this is me and it currently contains my DC's name throughout when i look it up as the description and netname...
Both are from the same DC however the other company has their name allocated to the ip address and i would like to do the same. Does this require Reverse DNS? It dosent involve domains surely does it?
I try to install wordpress on my dedicated server but in the begin i get this error:
Your PHP installation appears to be missing the MySQL extension which is required by WordPress
I have centos 5.3 and i have run the command: service mysql start
But i think mysql server is not running, because i have kloxo and from the panel i can see what servers are running.
I have been using apache and php-cgi and it works well together but when I tried to use
mod_rewrite it stopped working and I got "Internal Server Error" result.
Apache error log showed "FastCGI: incomplete headers (0 bytes) received from server"
I think that mod_rewrite rules are ok because when I refer to some HTML file then it all works.
Apache 2.2.14 and php 5.2.11
I have taken a order from them for 5 Days,but no response from them except a auto comfirmation email,what is wrong with SharkTech?
View 7 Replies View RelatedI was working with my server until 30 min ago. suddenly public IP addresses stopped working. I have access to the server directly from the console and local IPs with putty.
View 7 Replies View RelatedHow can I best work with a syn flood? I've tried the apf, deflate-ddos etc.... and don't work. Even tried litespeed etc but doesn't work against a 90mbps attack.
If I get a few servers, how would I have it setup to best defend?
I'm working on a new project that involves some heavy data processing in the preparation stage. As an example, one of the setup jobs is now running on a P4-3.0HT desktop at 100% CPU and I estimate it'll be finished in just under a week! Memory and i/o usage are minimal but it's extremely CPU-hungry.
There are other similar jobs to follow and some correlation between the number of cpu cycles and the quality of results so I foresee an ongoing need for computing power for at least a few months.
Viable options are to continue running my own hardware (probably supplementing the P4 with something a bit newer), Amazon EC2 or a cheap dedicated server - I can get a good handle on the cost and performance of each of these.
But I wonder if I'd get more bang per buck from a few VPSs? Some of the VPS benchmark results are spectacular so I suspect the answer could be yes, in the short term anyway. But I don't want to hog the host-node's CPU to the point where it degrades other users' performance or gets my account shut down... Then again, judging by the performance of the VPSs I've used for hosting the node seems to have a lot of spare CPU available...
So (finally) to the questions: Am I crazy to even consider this? If not, which technology would be most suitable? (I'm thinking Xen because of its reputation for better isolation.) Has anyone else done anything similar?
I sent email through php function mail - false.
Open putty ->
php -r 'mail("***@gmail.com","test","jjjjjjjj";'
sh: /usr/sbin/sendmail: No such file or directory
SENDMAIL not installed ?
CentOs 5
Like the title says, I just moved my site over to my own server, and it is running cpanel. Anyways the main site [url]works, but [url]does not.
What is really strange is, [url]works fine as does [url]
So I figure there is something I have to do to get it all to work right.
The other issue is that if you are logged into [url]but goto [url], you are not logged in anymore, but if you go back to the original link, then you are still logged in. This happened on the other guys server before with the main site as well.
i Installed BFD ( Brute Force Detection ) from rfxnetworks.com and it it doesnt block or send any notification emails about blocked Ip adresses
1.after installation i got this:
Install path: /usr/local/bfd
Config path: /usr/local/bfd/conf.bfd
Executable path: /usr/local/sbin/bfd
which means installed with no errors
2.when i do this: /usr/local/sbin/bfd -s
i get
BFD version 0.9 <bfd@r-fx.org>
Copyright (C) 1999-2004, R-fx Networks <proj@r-fx.org>
Copyright (C) 2004, Ryan MacDonald <ryan@r-fx.org>
This program may be freely redistributed under the terms of the GNU GPL
3. there is already bfd file in the cron.d
MAILTO=webmaster@mydomain.com
SHELL=/bin/sh
*/10 * * * * root /usr/local/sbin/bfd -q
any idea what i am missing here?
APF 0.9.6-3
WHM 11.15.0 cPanel 11.18.6-S24739
REDHAT Enterprise 5.1 i686 on standard - WHM X v3.1.0
Kernel 2.6.18-53.el5
How do SSL Certificates work? I was a bit confused when reading about them.
If i was to buy a SSL Certificate will it be difficult to intergrate with my website or would i have to spend alot of time remaking stuff
Also how many SSL Certificates would i need? And where can i buy cheap SSL Certificates if i chose to buy some?
when I try to go to a site of mine with the www like this one [url] It won't work but if I take out the www like this[url]it does work.
I'm not sure what could be causing this. As far as I'm aware everything is setup okay. I understand it's impossible for anyone who reads this to properly diagnose the issue without access to my server.
Lighttpd works well with static file.
But for php, it's totally not good for me
I just install lighttpd and php.
By [url]
Now It takes about 10 seconds for the
server to response.
Here is a part of config file
############ Options you really have to take care of
####################
server.max-keep-alive-requests = 4
server.max-keep-alive-idle = 4
server.max-read-idle = 60
server.max-write-idle = 1024
server.max-fds = 8192
php.ini using the default one
Here is the link to it
[url]
And only about 200 connections. the load average is only 0.02.
When I check the error log
2007-11-08 12:38:46: (server.c.1253) NOTE: a request for
/view_video.php?viewkey=f8e13f14b405e038deb6&page=&viewtype=&category=
timed out after writing 13068 bytes. We waited 1024 seconds. If this a
problem increase server.max-write-idle
2007-11-08 12:40:07: (server.c.1253) NOTE: a request for
/view_video.php?viewkey=b9530df88f7f002e78ea timed out after writing
13068 bytes. We waited 1024 seconds. If this a problem increase
server.max-write-idle
I have a server, SpamAssassin is installed but i disabled it, because i don't work with this, i'm getting a day about 1000 spam messages.
what to do to stop this?
today I noticed that whenever I type any of the domain names on my server with a "www." in the address bar, it simply says "server not found". When I remove the "www.", it loads the site?
This is a major issue. It never used to be this way, but I noticed it today. Where should I edit? Could it be "named.conf"? Or maybe just DNS cname settings in plesk?
You rent space at a datacenter that fits your power and cooling requirements. You bring your own equipment or ship it to the datacenter to get setup in your rack. Who handles fixing things? You or the datacenter? Also, do you ever have access to your server physically while it's at a datacenter?
How about bandwidth and providers? NOCS, POPS, IAX's etc... Where do those come into play and how does that structure typically look (anyone have any graphical illustrations of how peering/backbones etc work with IAX's, POP's, and NOC's?) I'm curious more about that then colocation at it's most basic forms.