VPS Not Listing In Panel
May 28, 2007
I am having a very weird problem with virtuozzo. I created about 8 VPS in my server. But when i logged into the server after two days, I could find that some of the VPS i had created disappeared. And the ones that still listed, were in the mounted state.
I have no idea of what is happening with the server. To list all the VPS back i had to log into the base node and restart service vz.
I don log into the virtuozzo very often, but whenever i log into the panel after some time ( a day or two) this is what happens.
I need to move clients over to the new VPS, but the issue is causing a lot of worry for me. What if this happens once i move the client over. I cannot always go restarting th vz.
Please solve these issues
1) VPS changing to the mounted state
2) VPS disappearing from the virtuozzo panel.
View 10 Replies
ADVERTISEMENT
Apr 13, 2008
My server listed in spamcannibal but I dont know why
My IPs range are xx.xx.xx.166- 169 and the spam comes from xx.xx.xx.220 which doesnt belongs to me.
View 2 Replies
View Related
Jul 24, 2007
through ftp can see max 2000 files for single dir.
How can we setting this value?
View 2 Replies
View Related
Nov 8, 2009
My server has been formated it has two drives. I have my back up on the second drives.
What is the command I use to list the drives and how to mount the second drive.
View 1 Replies
View Related
Nov 21, 2008
Checking a domain for RBL listing
How can I check if my domain is listed in the RBL listing?
View 7 Replies
View Related
Nov 24, 2008
I have a problem with the configuration of my domain check out.
intodns.com/camhotgirls.com
The problem here specifically seems to be that the nameserver2 is not listed with the parent servers. I have no idea what that means and how I can list them?
View 8 Replies
View Related
Apr 2, 2007
I've just made a transition from a VDS to a Dedicated and I'm having problems preventing directory contents from showing. In my previous server whenever I created a directory, it would automatically give a 403 when you tried to access the directory directly in your browser (which is what I want). Now when I set up directories in this new dedicated the contents of the directories display when there is either no index page or if I didn't have an htaccess file preventing it from listing the contents.
So what im asking is how did my previous server automatically set up the directories to not display the contents but use the contents and allow access to say for example pictures in the directory?
Is there a way I can have apache automatically do this for me or do I have to place a blank index page in every directory i create or have to place an htaccess file in every directory I create? How can I protect the contents with a 403 but still allow the contents to be accessed only through full path?
View 13 Replies
View Related
Aug 26, 2007
I have an APC AP7930 which just randomly stopped showing the amperage of the circuit. When I log into the device I see:
Code:
Communication Status
Communication has been lost to the device!
and in the logs see:
Code:
08/26/2007 11:00:53 Switched Rack PDU: Communications lost.
08/26/2007 10:55:21 Switched Rack PDU: Communications lost.
08/26/2007 10:49:39 Switched Rack PDU: Communications lost.
08/26/2007 10:27:58 Switched Rack PDU: Communications lost.
08/26/2007 09:57:58 Switched Rack PDU: Communications lost.
Anyone ever see this on the AP793X series? My next step is to contact APC as think the unit might be under warranty. But it definitely will not be fun to migrate power for the some 20 devices connected to it...
I recently upgraded the firmware and rebooted the management interface several times to no avail. Powering down the PDU is not an option at this point.
This is the first time I've had an issue with an APC product. This isn't a huge issue. But I DO rely on amperage readings to keep from tripping breakers and keep power even among cabinets...
View 3 Replies
View Related
Jul 21, 2007
May be this is a stupid question, but I really don't know why I can't list the files in the root folder of a website(I didn't put any index.html or index.php in the folder).
I point my domain.com to /home/user/docs, the server can list domain.com/test/ files. But it can't list the files of domain.com/. It just shows the page at /var/www/htm, if I don't have any index file under /home/user/docs.
I have this in the httpd.conf file:
<Directory "/home/user/docs">
Options +Indexes
allow from all
</Directory>
View 2 Replies
View Related
Oct 15, 2007
I have a website and i am trying to have a specific folder be able to list if u go to [url]
Anyone know how i can do this?
I thought it was something to do with the .htaccess but i cant seem to find anything for it.
View 6 Replies
View Related
Jul 4, 2007
Anyone knows what is the optimum time to set for the delay in Windows Grey Listing?
View 3 Replies
View Related
Aug 24, 2007
What is the best way to get a list of all the software installed on a Linux server? Are there specific shell commands for this?
View 12 Replies
View Related
Jul 26, 2007
I set up my own webserver earlier this year using a dedicated server from my hosting company (IIS, win2003), for some reason two of my websites on there are not being listed by Google (or any search engine) at all. Could there be something wrong in my setup that can cause this to happen?
View 3 Replies
View Related
Jul 26, 2009
I recently had an issue where my box wasnt listing accounts (on logging into WHM for the first time it would, thereafter browsing different functions in WHM it would fail to list any accounts), would not list any zone items when editing DNS zones and in general was acting very strange.
I think the tech support chap narrowed it down to zero free inodes on the filesystem (i was even getting errors when editing files with 'vi'). This was increased for the VPS and all issues seemed to be resolved...
However named and httpd were not starting after reboots. Again on looking closely named and httpd were missing from /etc/init.d (on CentOS 5.3)! This is very strange and i certainly didnt modify those nor delete such critical files.
For a second opinion, is there any cPanel script that can be ran to fix the issues, i am concerned other things have been affected but havent manifested themselves yet (other files deleted etc). Does cPanel update script create the init.d files or is this done by the CentOS operating systems itself? Are these files modified during a cPanel update script?
These init.d files for named and httpd have been readded (copied across from another box) and it seems to be ok again, but ideas on howto proceed much appreciated, as i mentioned i dont want any nasty supprises!
View 2 Replies
View Related
Jan 19, 2008
I've been happily banning ip's using the output from
netstat -plan|grep :80|awk {'print $5'}|cut -d: -f 1|sort|uniq -c|sort -nk 1
for over a year now, with iptables. However recently, after upgrading to apache 2.2, the connections in netstat get listed as ipv6. A row can look like this for example:
tcp6 0 0 ::ffff:12.123.123.123:80 ::ffff:12.123.12.:12382 ESTABLISHED-
(actual ip addresses changed)
As you can see, the remote ip address isn't complete, it's cut off, so the script used to sum up connections and insert into iptables isnt doing anything.
View 0 Replies
View Related
Sep 6, 2014
Initially I was able to connect via FTP. Then all of a sudden I started getting 550 SSL/TLS required on the control channel. Why did it suddenly required SSL/TLS when I did not do anything extra?
Now when I'm trying to connect via FTPES using FileZilla (tried both active and passive) on Linux Mint Debian, I'm getting the error below. I'm really stumped. I have tried to Allow incoming from all on port 49152-65534/tcp via Plesk firewall, but still no go.
The worst thing now is, I can't even get FTP to work anymore. Of course I would prefer to have TLS working.
Status:Connection established, waiting for welcome message...
Response:220 ProFTPD 1.3.5 Server (ProFTPD) [206.106.213.243]
Command:AUTH TLS
[Code]....
View 1 Replies
View Related
Jan 14, 2015
I've been plagued by CBL listing for quite some time now, on a linux server with Plesk 12.After months of a fierce fight against every possible malware on the about 120 various websites on this server, extensively monitoring clients emails, enabling restrictive policies and finally even hiring a private security firm to investigate the problems further, we were sure that not a single spam message was sent by our server in any way.
So we finally contacted CBL, exposed the issue and got this answer:The CBL attempts to detect compromised machines in a number of ways based upon the email that the CBL's mail servers receive.During this it tries distinguish whether the connections represent real mail servers by ensuring that each connection is claiming a plausible machine name for itself (via SMTP HELO), and not listing any IP that corresponds to a real mail server (or several mail servers if the IP address is a NAT firewall with multiple mail servers behind it). 54.194.XX.XXX was found to be using several different EHLO/HELO names during multiple connections on or about:
2015:01:09 ~16:30 UTC+/- 15 minutes (approximately 3 days, 21 hours, 14 minutes ago).
The names seen included: xxx1.xx, xxx2.xx, xxx3.xx, xxx4.xx, xx.xxx5.xx, veniceberg.com..Note that the above list may include one or more names that are not fully qualified DNS names (FQDNs). Host names (ie: Windows node names) without a dot are not FQDNs.
The final possibility is that 54.194.XX.XXX is not a NAT firewall, and is instead a single box with many domains provisioned on it, some that send email directly, setting the HELO as the sending domain. If this is the case, to prevent a relisting we strongly recommend setting the mail software on the box so that a single identifying name is used in outbound SMTP connections mail software on the box so that a single identifying name is used in outbound SMTP connections. As an alternate workaround, you can configure the mail software to relay its outbound email through an intermediate mail server. Even a co-resident mail server package (such as IIS on Windows) will do fine.
This pointed me to this Plesk Mail setting (not sure if this selection is the default). Now we are waiting a few days to see if changing to "Send from domain IP addresses" solves the issue. I think this is a kind of issue which deserves attention by Parallels to avoid other users go trough our fatiguing ordeals. If this setting is responsible for getting servers blacklisted, it should be highly discouraged.
View 3 Replies
View Related
Dec 25, 2014
Today I try to fit all FW rules to my need. After i blocked the traffic "allow other incoming traffic" in the Plesk FW i dont get folders listed via FTP. The FTP client connect to my server, but listing content times out. After allow other traffic the content get listed. The rule "Allow FTP connections" ist in all enabled all the time.
View 3 Replies
View Related
Oct 11, 2007
I indicated that I've basically been using my webhosting company as "file storage".
1) I create all my files in .html using notepad
2) My files are limited to .html, .jpg, .gif, (and a couple of .js and .css) files.
3) My domain is not connected with my webhost; I use the nameserver zoneedit.com and I use URL forwarding and mask/cloak the domain the address bar (using multiple domains) as follows:
domain1.com --> forwards to [url]
domain2.com --> forwards to [url]
domain3.com --> forwards to [url]
4) For uploading files, I go to ftp://123.456.78 and drop/drag/copy/paste files into the window using my browser
5) I'm able to password protect the subdirectories as I choose.
---------------
I called my webhost, Hostik, and told them that I was unable to do anything on my web console. I can't change a password, create a user, or even access my usage/bandwidth quotas.
They told me that I'm on an "old server" using the windows-based console (probably C-Panel / Control Panel) and they're in the process over the next three months of transfering everyone over to "Plesk".
So, they set me up with a new Plesk account, while keeping the old one in place, so that I could move/transfer my files to the Plesk account.
When I went to Plesk, I realized things are not the same:
1) In my Control Panel / C-Panel, I had a unique IP URL Address - [url]
2) In Plesk, it seems there's a set IP URL Address - [url] - that everyone shares.
3) I was told that in Plesk, many people use that IP URL address and that I'm supposed to place my files into the "httpdocs" folder.
Appearently, this is a system of shared hosting whereby many people have the same IP URL address (different from what I had before) and it recognizes each account by the login or something, so the "httpdocs" folder would identify my domain.
I was then told that in Plesk, I must have my domain affixed to the Plesk account.
In other words, I can no longer do what I was doing before, having my domain separated in another location and using URL forwarding from an outside nameserver.
--------------------------
So, my original question is what's the difference between Plesk vs. C-Panel/Control Panel?
Perhaps I answered most of it above.
Is it correct that I can't do things the way I've been doing them so far if that's the case?
It might be that Plesk is not for me and I may need to find a host that gives me my own unique IP URL Address. However, I was informed that not many companies are doing that as most are switching over to Plesk.
In addition, Hostik does not offer multiple domains.
In response to this thread, David recommended I try synhosting.com
synhosting.com has "Multiple Websites". I assume this means mulitiple domains. Correct?
What's my best option at this point?
1) Find a host that has C-Panel / Control Panel (if any there are)?
2) Use a service such as synhosting.com and move all my domains over to them?
3) If I do use synhosting.com, am I required to move my domains over to their nameservers?
4) I have my MX Mail records pointing to Fastmail.fm for my email virtual domains. Would I still be able to do this if my domain is dedicated to a webhost and opt not to use their email feature?
5) Should I get rid of this old-school thought of using my web host as "file storage" and stop this practice of using URL forwarding and cloaking?
View 7 Replies
View Related
Apr 10, 2014
I enabled plesk firewall to my ip now I cant seem retrieve directory listing. I've done the same with ssh that works fine.
Response:230 User logged in
Command:OPTS UTF8 ON
Response:200 UTF8 set to on
Status:Connected
Status:Retrieving directory listing...
Command:PWD
Response:257 "/" is the current directory
Command:TYPE I
Response:200 Type set to I
Command:PASV
Response:227 Entering Passive Mode
Command:MLSD
Error:Connection timed out
Error:Failed to retrieve directory listing
View 3 Replies
View Related
Jun 9, 2008
I have a public website, unfortunately, I believed it was being hacked and now the page only display:Directory listing Denied. This Virtual Directory does not allow to be listed..
How could I solve it?My website just consists of one phpbb forum and some html files.
View 5 Replies
View Related
Apr 23, 2009
I got an error in ftp.
Command:MLSD
Response:150 Accepted data connection
Response:226-ASCII
Response:226-Options: -a -l
Response:226 24 matches total
Error:Connection timed out
Error:Failed to retrieve directory listing
View 4 Replies
View Related
Nov 26, 2007
good software to manage multiple VPS, create, delete, and transfer server to server with a icon based interface that will work on centos..
I would like something i could create a template vps with selected os etc. and just duplicate and then install whm/cpanel afterwords..
View 14 Replies
View Related
Apr 11, 2009
I tried contacting the live support from fatcow, and he was no help. It was probably just the guy i had but thats not the point. I think i am going to go with them but what control panel do they use?
View 14 Replies
View Related
Apr 27, 2009
tell me which web panel recommend for xen virtuo.?
i need frontend of panel.
View 13 Replies
View Related
Nov 8, 2009
know if i was to start a vps company. What FREE vps software and control panel are out there?
View 14 Replies
View Related
