I came across below link on one of the other forums:
[url]
It shows that there are big problems with ultimahosts. I am observing more of such issues recently amongst many companies. Is this something to do with the current economic situation?
My worst experience is with Ultimahosts - the ultimate non professional behaviour. Today I have woken up to see my account suspended and without any notice or reminder!
reason: Your account has been terminated following the 1 year expiry the plan. This is the final notification.
Where is my reminder that my account is near expiry? When asked no answer has been recieved till now and that's why I am hoping to get some answer from Mr Mark here along with an opinion of experts and users of this forum...
I have a server that has multiple IPs, one of which I'm using for a VM that is bridged.
The issue is, internally, that IP is trying to point to itself rather then the bridged nic (which is technically a whole other server plugged into the same switch, logically).
I think I know why, I just don't know how to fix it. This is the config file for the ranges:
Quote:
# Intel Corporation 82546EB Gigabit Ethernet Controller (Copper)
DEVICE=eth1
BOOTPROTO=static
DHCPCLASS=
HWADDR=....
ONBOOT=yes
IPADDR_START=....243
IPADDR_END=....254
CLONENUM_START=0
GATEWAY=....241
NETMASK=255.255.255.240
NO_ALIASROUTING=yes
(edited a few things out just in case)
Basically, there's a start and an end, is there a way to exclude an IP?
When trying to access my webpage (www.avillafan.com) i get this message:
Quote:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, webmaster@avillafan.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
--------------------------------------------------------------------------------
Apache/1.3.37 Server at www.avillafan.com Port 80
So i contacted my host and he says its not a problem he can solve. Its a problem my end. However i cant see how as my site was working fine this morning.
So i accessed my cpanel and looked at the Error Log. And it says this message about 300 times!
Quote:
File does not exist: /home/villafan/public_html/500.shtml
(11)Resource temporarily unavailable: couldn't spawn child process: /home/villafan/public_html/index.php
I am getting 500 Internal server error.What may be the reason ?
The site was running fine till yesterday.
I run a proxy. First, I was on shared hosting. Worked for 2 months. then, bam! 500 internal server error.
I moved to a smaller VPS with 128 MB RAM. Worked for 30 min, then 500 internal server error again...
So now I moved to a larger VPS with 512 MB RAM, 1 GB burstable. Worked for 2 days, and now the 500's is back...
Rebooting the VPS usually fixes it, but I can not be sure I can continue rebooting it, as I expect it getting worse later.
It usually starts with lighttpd goes insane. One minute it's using 30 mb RAM, ok that's good. Then suddenly it uses 300 mb. then 500 mb. Then the 500 internal server error occur.
So any ideas of how I should configure this so it would work in a better way?
This is filled in the error log:
2009-06-02 13:21:16: (mod_indexfile.c.182) file not found ... or so: Too many open files / -> /home/admin/datashelf.net/
I just assume my files in the server of my website has some virus.
so i just delete all the files and upload it again.
But after i upload it website doesnt open.
Why?It shows the message 500 Internal server error.
How can I fix an internal server error?
View 7 Replies View RelatedI have been trying to create my own web gallery using Adobe's Web Photo Gallery (as it seem to be so easy to use). I have created my gallery and it all seems to work fine when testing on my desktop. However, once I upload the files I get the error "internal Server Error"
View 5 Replies View Relatedlist quality data centers that offers internal Cpanel VPS licenses in the 7-10 dollar range per VPS.
View 0 Replies View Relatedwhat is a 500 internal server error? i was uploading things to my site and all the sudden on one of the pages where i submit a form it gives me a 500 internal server error. i contacted support and they said they were working on it. i have tried to upload an old version of the file that worked before but it still gave me the same error. they said they would get back to me within 24 hours, its been three days and i still have the problem and no notes/email from them . does internal sever error mean its not a problem on my side or could it be some of my code causing the problem?
View 5 Replies View RelatedI have two separate C-class IPs in my vlan and use one single gigabit switch for the uplink and internal/external traffic.
Since last month, I noticed that internal traffic is included in my bandwidth usage. Somehow, traffic from server A to server B is billed! The strange thing is that the traceroute is showing that traffic is not going through the routers, its one single hop.
So I am really wondering how this is possible. Could it be that the provider has changed some vlan settings to let me pay massive overage fees?
I'm in the mid of working out some issues I have with linked servers. I was wondering what the best method is to add internal IP's to my servers?
This is what I did:
/etc/sysconfig/network-scripts/ifcfg-eth0:10
In there, I placed:
DEVICE=eth0:10
IPADDR=192.168.1.100
NETMASK=255.255.255.0
ONBOOT=yes
Saved, and then:
/sbin/service network restart
====
Have I done this correctly? If not, what's the correct way of adding the internal IP addresses? My servers are linked together via an Ethernet cable.
In a linux webserver how can you setup two servers to communicate via eth1 rather than eth0. We wish to use eth1 for internal communication between our public webserver and our database server. So that we do not incurr charges on the public switch.
How can we do this?
We offer colocation & dedicated servers as well as shared & reseller hosting services.
Our colocation customers and dedicated server customers are definitely on their own VLANs for obvious reasons.
Up until now, we have been using separate VLANS and ip allocations for each of the servers in our shared & reseller server fleet. I'm starting to question this policy for many reasons:
1) We directly manage all of the servers and it is very rare that any servers are compromised to the point where they can steal an IP address.
2) We are wasting IP addresses - network, broadcast and gateway addresses are required for each vlan. Additionally, if a server needs 1 more IP address, we need to add a whole new block.
If all of the servers are under our direct management, does it make sense for us to use any vlans at all? It seems that it only serves to complicate things, waste ips and add management overhead.
I have useing lighttpd for my website,my site Only picture.
but if access peak , There are often 500 Internal Server Error,
I have six dedicated servers on a VPR. I use one of these as the Database server and the other five connects to that server to read the Database.
When I setup my scripts for the first time I used the external IP to connect to the DB server. Everything worked perfect for these weeks:
mysql_connect('174.xxx.xxx.xx', 'user', 'pass');
Since three days ago I finally received the internal IPs of my servers and now I use the internal IP of the DB server:
mysql_connect('10.0.0.1:3306', 'user', 'pass');
When I did this last change this my database started to collapse. Queries stuck on a bottleneck every 10 minutes. Here's an example:
40468 simon 10.0.0.7:47002 pkindigo_db Query 115 Locked update `captured` set hp_left = '79', status = 'normal', att1pp = '25', att2pp = '30', att3p
40523 simon 10.0.0.2:58080 pkindigo_db Query 115 Locked update `captured` set experience = '5120', level = '16', hp_left = '58', hp = '58', status =
... (tons of locked queries before) ...
As you may see table is locked since 115 seconds for a simple update... after some hours this ends on a "#1135 - Can't create a new thread (errno 13); if you are not out of available memory, you can consult the manual for a possible OS-dependent bug" and even some of my tables finally crashing.
I think that my Database stuck because of a DNS lookup delay. When I had this problem before using the external IPs, I added skip-name-resolve and the problem was fixed. But now with the internal IPs it seems that's not enough.
my friend is getting frequently 500 - Internal Error on his sites when ever he starts to get good amount of traffic at a moment, and by the time it resets to normal more than half the traffic is lost, he is using wordpress blog, some other applications not of any traffic, an IPB forum, and some other image hosting script
in total he has 3 databases used, he's not running to outage of RAM, he is using max.
70% of RAM at the pt. when this occurs, checked once long way back..
he usually gets lots of traffic to blog and image host as he posts some real good stuff..
Here is the log when I got 500 Internal Server Error
GET /webmail/ HTTP/1.1
Host: www.domain-name.com
User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:1.9.0.7) Gecko/2009021906 Firefox/3.0.7
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
--172dce78-F--
HTTP/1.0 500 Internal Server Error
X-Powered-By: PHP/5.2.9
Vary: Accept-Encoding,User-Agent
Content-Encoding: gzip
Content-Length: 20
Connection: close
Content-Type: text/html
--172dce78-H--
Apache-Handler: application/x-httpd-php
Stopwatch: 1237885301072213 12079 (504 908 11749)
Producer: ModSecurity for Apache/2.5.7 [url] ; core ruleset/1.6.0.
Server: Apache
--172dce78-K--
--172dce78-Z--
None of security rules is listed in that error log, so I am totally lost. It's working once when I restart apache, but after that, it's not working anymore.
I installed new apache (2.2.6) and mod_security 2. I wish to block some file globally by:
SecRule REQUEST_URI ".*(some_file).php?.*"
but how to NOT BLOCL for some folder / account? I tried to add to .htaccess:
<Files some_file.php>SecFilterInheritance Off</Files>
or
<Files some_file.php>SecRule Off</Files>
or
<IfModule mod_security2.c>SecRule Off</IfModule>
or
<IfModule mod_security2.c> SecRuleEngine Off</IfModule>
but always I have Internal Server Error
My web host provider uses suPHP and I'm having a lot of trouble installing a php script correctly. Even something as simple as <?php phpinfo(); ?> seems to give me an internal server error.
View 10 Replies View RelatedHere's my story: The landlord provides the internet for the house and it goes through a server which has squid installed. Squid in turn seems to block the internal port (or whatever the exact term for that is) for phpmyadmin or webmail in cpanel so I cannot access them.
At my reseller account at Hostgator they said they redirected that port to port80 via mod rewrite and that now works for me. I wonder how I would do the same thing on a dedicated server. I can't see what Hostgator did since it's happening out of my sight somewhere. Otherwise I would just replicate that on my box.
lighttpd crash with 500 internal error.
connection is about 1000. the load average is only 0.78.
Is lighttpd good for dynamic site?
Maybe I need to switch back to apache.
Here is the log file.
Quote:
2008-03-06 10:45:00: (mod_fastcgi.c.2855) backend is overloaded; we'll disable it for 2 seconds and send the request to another backend instead: reconnects: 1 load: 545
2008-03-06 10:45:00: (mod_fastcgi.c.2855) backend is overloaded; we'll disable it for 2 seconds and send the request to another backend instead: reconnects: 0 load: 546
2008-03-06 10:45:00: (mod_fastcgi.c.2855) backend is overloaded; we'll disable it for 2 seconds and send the request to another backend instead: reconnects: 1 load: 546
2008-03-06 10:45:00: (mod_fastcgi.c.3496) all handlers for /view_video.php on .php are down.
2008-03-06 10:45:03: (mod_fastcgi.c.2633) fcgi-server re-enabled: 0 /var/run/lighttpd/php-fastcgi.socket
2008-03-06 10:45:03: (mod_fastcgi.c.2633) fcgi-server re-enabled: 0 /var/run/lighttpd/php-fastcgi.socket
2008-03-06 10:45:03: (mod_fastcgi.c.2633) fcgi-server re-enabled: 0 /var/run/lighttpd/php-fastcgi.socket
2008-03-06 10:45:03: (mod_fastcgi.c.2633) fcgi-server re-enabled: 0 /var/run/lighttpd/php-fastcgi.socket
Here is part of the conf file
Quote:
####################
server.max-keep-alive-requests = 0
server.max-keep-alive-idle = 4
server.max-read-idle = 60
server.max-write-idle = 1024
server.max-fds = 8192
## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini
fastcgi.server = ( ".php" =>
( "localhost" =>
(
"socket" => "/var/run/lighttpd/php-fastcgi.socket",
"bin-path" => "/usr/bin/php-cgi",
"bin-environment" => (
"PHP_FCGI_CHILDREN" => "8",
"PHP_FCGI_MAX_REQUESTS" => "8000"
)
)
)
)
I switched over a new host and everything was working perfectly. I then uploaded one last directory but it had a weird internal server error when trying to access the index.php file. I then googled it and changed directory permissions to 755, and I am not sure if it is a coincidence but now every site on my server with php files displays that error but html pages are fine.
View 5 Replies View Relatedeach web sites hosted on my server which use phpflag in .htaccess show the Internal Server Error, when I comment the phpflag line by # , the website work correctly.
View 3 Replies View Relatedam protecting my entire site with .htaccess/.htpsswd
i get promoted to enter username and address
ok that's fine
however after that the page doesn't load and instead i get:
++++++++++++++++++++++++++++++++++++++++++++++++++
500 Internal Error
The requested page produced an internal error. If you are the webmaster of this website please check: That script has been uploaded as ASCII (if CGI/Perl)
If the file and folder permissions are correct, e.g. 755
Your .htaccess file (if any).
Servage.net Clustered Webhosting running enhanced Apache Webserver why is that guys??
++++++++++++++++++++++++++++++++++++++++++++++++++
I'm using IIS v5.1 on WinXP SP1 and I encountered this error (Page cannot be displayed.....HTTP 500 - internal server error) all of a sudden. now, i've been using my Web server with no hitches, but now I can't open any pages on the server that run server side scripts so i reinstalled it and still get the same "Page cannot be displayed" or I get part of the source code for the server side script. Pinging the server shows that its ok, it replies. and regular pages with no scripts still run with the http protocol in the address. Any ideas on how to get past this problem?
View 2 Replies View RelatedI want to rewrite across subdomains, e.g. requests for sub1.mydomain.com/foo.htm -> www.mydomain.com/foo.htm. I can do
this with something like:
Code:
RewriteCond %{HTTP_HOST} ^sub[0-9].
RewriteRule (.*) http://www.mydomain.com/$1 [R=303,L]
I want to make it an internal rewrite though, not an external redirect. If I remove the [R=303] I still end up with a redirect (a 302). I assume mod_rewrite is forcing an external redirect because it's to a different [sub]domain.
Is there any way I can overcome this and make the change internal?
This is just an internal server setup to learn web programming and looking to create a environment close as possible to the real world setup. I'm using xxxx.dlinkddns.com
View 1 Replies View Related