I have a requirement for a server with a need to store 4000 entries each having a 10 mb video clip. No indication of popularity of site as this is a startup. Thats my headache part, normally for such a server would it be advisable using SCSI / SAS and expecting a huge bandwidth requirements? Or should it be done implemented as a cluster?
View 2 Replies
a new dedicated server for a new site we will be launching very soon. We have been weighing our options as far as server configurations and because it is a startup our budget is limited.
But the one thing I wanted to ask about is our primary hard drives. We were going to go with 2x250GB RAID1 SATAII's for their price and reliability. Our total server budget is around $400/mo... so money is tight.
But this site will have about 100-150 High Definition Videos in a certain section (averaging about 200mb each) that are viewed in progressive-download. The daily traffic is about 8,000 uniques and we can't really be sure how many people a day will watch a video, or how many videos they will watch.
With that being said... do you think RAID 1 SATA's are fine? We don't want any problems with people having slow download speeds, since fast transfer speeds are important to us. Or would the SATA's be a problem for sure and you'd recommend faster SCSI drives or RAID 5/10/etc.?? We are not even sure if we can afford faster drives... but if you guys thought SATA's would be a problem.. we'd go back and sharpen our pencils some more.
Just Joined steadFast.net Hosting best Hosting so Far very happy with them , Fast and reliable but the disk space is small and i am not rich lol
anyway i am thinking to send mass email to my 4222 members is that a problem? i am hosted on a shared Hosting (bronze)
I'll have any problem with my bandwidth? will my site go down?
I've exausted my self attempting to load on a boot image to the management blade for a project that i'm doing with a few friends.
I just bought this Foundary *off ebay of course* and who ever had it last removed the image! I mean I cant even get into the primary or secondary. I tried booting from tftp, but everytime that happens, the switch just restarts and then doesnt boot up again. This is what i'm getting.
Code:
BOOT INFO: RESET ANY
master arbitrate : become primary arbitrator.
BOOT INFO: Become active CPU module
M2 BI Boot Code Version 06.05.00
Enter 'b' to go to boot monitor ...
BOOT INFO: load from primary copy
BOOT ERR: bad code image header
BOOT INFO: load from secondary copy
BOOT ERR: bad code image header
BOOT INFO: try to boot from bootp server
bootp timed out, bootp-tftp process aborted!
BOOT ERR: bootp failed
I currently have the B2R07601b.BIN image, just I dont know how to load the file onto the blade via tftp or any other method.
for hosting our adult video projects looking for a suitable dedicated server. Data we have primarily located elsewhere, therefore, regards the site that will serve as a cache.
Then just one HDD and 2 gigabytes of RAM, and virtually any processor, what is most important for us is the connectivity and traffic.
Therefore looking for dedicated server (unmanaged) with the lowest possible price for the most transmission. any specific recommendations?
I uploaded over 100 videos only to realise the way they are named is stopping FFMPEG from converting them. Is there any way to bulk change the names?
View 5 Replies View Relatedhow to optimize a server for playing flash videos?
Here is our website: operationsports.com
In the right menu you'll notice an embedded flash video player.
Often, we receive complaints that our videos are buffering slowly at the beginning causing the movie to stop/pause for a few seconds. After this pause the remainder of the video buffers lightening quick.
I'd like to remove the pause if possible.
The server is a dual processor linux based server dedicated entirely to our video files.
It has plenty of power.
how to optimize a server for playing flash videos smoothly?
I will be launching a video website like youtube and I have put all the DMCA requirements on it, I'm still not sure if I can get in trouble if someone uploads copyrighted videos, would it make a difference if I get a dedicated server located in Netherlands?
View 5 Replies View RelatedI have a VPS server and was trying to figure out the best way to stream videos...its running CentOS 5, any recommendations?
Will VLC work?
I'm making a website with image galleries, music videos and mp3. There will be about 20-30 music videos and mp3 files for playing online from server. So, I guess I should look for hosting companies offering large monthly bandwidth.
View 14 Replies View Relatedwhere you host your large videos google, blip.tv, ... etc ?
I personally like blip.tv, just because it is simple and there is not time limit (but within 1GB size).
I have a website that users can download software (~150 MB).
I currently have a VPS server with Liquidweb.
20 GB RAID protected storage, 384MB dedicated RAM (maximum that can be achieved is 528MB on this package), 200GB Monthly Bandwidth Transfer. I don't use much of the 20GB disk space, but every month I use about 60 GB Bandwidth.
Now I plan on incorporating video files into one of my software packages. Because there will be about 1000 video files (each being about 3-4 MB), that would take up 3-4 GB drive storage; hence, I don't think it's feasible that the users can download the software package. Instead, I can keep the software package size to a minimum and the solution would be to STREAM the videos from within the program.
At this point, I can do one of two things:
1) Keep my VPN for my website and find a hosting provider that has STREAMING services for the videos
2) Upgrade my VPN to a Dedicated Server (Pentium 4 3GHZ Hyperthreaded, 2GB DDR SDRAM, 120GB 7200RPM SATA/8MB Cache, 2000GB Monthly Bandwidth) and have my website and streaming videos on one server.
Also, if I choose option #2, would you recommend upgrading to Dual 120GB SATA / Hardware Raid 1 [add $40/month] or 73GB 10,000RPM SCSI / 8MB Cache [add $60/month]
Again, I just need a server that will play the videos. I will have users that will be simultaneously connecting to the server to watch the videos from within the program so I would like the most stable and seamless choice.
I am no computer genius, but I am trying to learn.
I have a question concerning embedded videos.
When you embed a YouTube video into a web page, does that not use bandwidth of the host of your website?
Again, please forgive my ignorance, I'm trying to learn. From what I've seen on WHT so far, I should be up to speed before too long.
I got ffmpeg, mencoder and flvtool2 installed on my server (centos 4) but when I try use them, the size comes off substantially bigger then what I can do on my PC.
For example I've been using Sorenson Squeeze (using Sorenson codec) and say at 240brate(video) and 32 (audio) and at 320-240, it comes to about 100 megs for a 50 min video.
Is there some good strategy on using these free tools effectively? or do the free codecs just can't compare to the paid ones?
What would be the commands that you guys would run to get the best size for those specified options I mentioned? On mencoder and flvtool2 that is. I have the latest versions installed.
I have a website that embeds anime videos hosted on websites like youtube/veoh/megavideo.
Is there a country/place a can host this type of site where it is legal to do this kind of embedding/linking. (none of the videos are hosted on website)
My server was hacked, they destroyed some of it, but alot was intact. My provider swiftly changed the original HD, put in a new one and have attached the old one to allow data transfer. I cannot see the Mysql section and about 900 videos from a particular folder are missing.
Is there ANY way I can recover anything in this situation?
I have problem with clipshare script. when i upload videos, they are successfully uploaded into video dir and thumbnails are also generated.
But when playing them, it constantly say loading....
I checked the flvideo dir, and it converted video(flv) is not there.
I searched a little and found a small changed needs to be done in convert.php. which i did but still it does not convert.
I wanted to know
* Where can i find conversion logs or more information on what exactly is going on, to further debug the issue.
* In convert.php i have replaced -lavfopts
i_certify_that_my_video_stream_does_not_use_b_frames -vop
WITH
-ofps 12 -vf
but still not fixed. should i roll back to previous state?
From siteadmin panel
system check
Code:
FLVIDEO Directory
writable (0777) (/home/hell2006/public_html/flvideo)
VIDEO Directory
writable (0777) (/home/hell2006/public_html/video)
THUMBS Directory
writable (0777) (/home/hell2006/public_html/thumb)
CHANNEL Directory
writable (0777) (/home/hell2006/public_html/chimg)
PHOTO Directory
writable (0777) (/home/hell2006/public_html/photo)
TMP Directory
writable (0777) (/home/hell2006/public_html/tmp)
Safe Mode
Open Basedir .....
I have a problem with some mp4 videos and the downloads made from cellphones.
I have a plain LAMP server (centos 5, apache 2, php 5), the customers download the videos from a web, mobile section, and play on their cellphones.
The strange thing is that when they opened the video to play it on the cellphone, the video shows itself as a binary, although the extension remains mp4.
Tried moving the same video to another server, and it was played ok without any changes.. so, tested another server and after making this changes, it was able to reproduce the mp4 format:
I changed the Default mime.types from text/plain to application/octet-stream
TypesConfig / etc / mime.types
# DefaultType is the default MIME type the server will use for a document
# If it can not otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text / plain" isnte
# A good value. If most of your content is binary, such as applications
# Or images, you may want to use "application / octet-stream" instead to
# Keep browsers from trying to display binary files as though they are
# Text.
#
DefaultType application / octet-stream
When the videos out in binary, with a lot of strange characters, leaving just this: application / octet-stream
I see in /etc/mime.types and there is support for many formats, including. Mp4
However, on the original first server even if I change the above code, I can not reproduce mp4.
On any laptop or pc from the three servers I can reproduce the videos, the problem it’s just on one server playing from cellphones.
But would one of those embedded Youtube-videos take up space (or bandwidth), if I had one on my site?
I don't know what they are called (that is why I called them Youtube-videos), but I mean videos that you can view on sites other than Youtube, but still have the Youtube-interface and can also be found on Youtube.
I own a small company specializing in the production of science education videos we sell to public schools. We would like to begin to deliver our videos to schools over the Internet. Our collection includes about two thousand video clips with accompanying metadata. We hope to gradually build a customer base of several hundred schools by June 2009. I need advice on how to find a good company that offers the colocation server option, and I need to know what kinds of questions to ask when shopping for a company.
View 2 Replies View RelatedWe have a portal which collect videos from all the video sharing sites such as Dailymotion, Veoh, YouTube,etc... No actual videos are hosted on our servers.
Recently, We got a letter from the lawyer of the copyright owner of some videos, stating that we are not allowed to link to these videos on our sites. If we dont remove those links they will take legal action on us.
So, my question is that can they actually sue us for linking to videos on youtube,dailymotion....?
The server is located in Chicago, if that makes any different?
As far as i know, if we dont store the actual copyright content on our servers then it is fine, at least with US law?
And i think they are just trying to scare us since there are like hundred of sites that doing the same thing and i see keeping doing it.
Part of the letter:
[url]
we have a site, x.com and it hosts videos, we want to serve these videos using lighty, however, we can't seem to get it to work at all, The current setup is Cpanel with Apache so we want Cpanel + Lighty(only for flvideo.x.com) and Apache for everything else, im running lighty on port 8080, we've tried different ports for the sake of trial and error.
This is the configuration that we have:
# lighttpd configuration file
#
# use it as a base for lighttpd 1.0.0 and above
#
# $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
############ Options you really have to take care of
####################
## modules to load
# at least mod_access and mod_accesslog should be loaded
# all other module should only be loaded if really neccesary
# - saves some time
# - saves memory
server.modules = (
# "mod_rewrite",
# "mod_redirect",
# "mod_alias",
"mod_access",
# "mod_cml",
# "mod_trigger_b4_dl",
# "mod_auth",
# "mod_status",
# "mod_setenv",
# "mod_fastcgi",
# "mod_proxy",
# "mod_simple_vhost",
# "mod_evhost",
"mod_userdir",
# "mod_cgi",
# "mod_compress",
# "mod_ssi",
# "mod_usertrack",
# "mod_expire",
# "mod_secdownload",
# "mod_rrdtool",
"mod_accesslog" )
## a static document-root, for virtual-hosting take look at the
## server.virtual-* options
server.document-root = "/home2/x/www/flvideo/"
## where to send error-messages to
server.errorlog = "/var/log/lighttpd/error.log"
# files to check for if .../ is requested
index-file.names = ( "index.php", "index.html",
"index.htm", "default.htm" )
## set the event-handler (read the performance section in the manual)
# server.event-handler = "freebsd-kqueue" # needed on OS X
# mimetype mapping
mimetype.assign = (
".rpm" => "application/x-rpm",
".pdf" => "application/pdf",
".sig" => "application/pgp-signature",
".spl" => "application/futuresplash",
".class" => "application/octet-stream",
".ps" => "application/postscript",
".torrent" => "application/x-bittorrent",
".dvi" => "application/x-dvi",
".gz" => "application/x-gzip",
".pac" => "application/x-ns-proxy-autoconfig",
".swf" => "application/x-shockwave-flash",
".tar.gz" => "application/x-tgz",
".tgz" => "application/x-tgz",
".tar" => "application/x-tar",
".zip" => "application/zip",
".mp3" => "audio/mpeg",
".m3u" => "audio/x-mpegurl",
".wma" => "audio/x-ms-wma",
".wax" => "audio/x-ms-wax",
".ogg" => "application/ogg",
".wav" => "audio/x-wav",
".gif" => "image/gif",
".jar" => "application/x-java-archive",
".jpg" => "image/jpeg",
".jpeg" => "image/jpeg",
".png" => "image/png",
".xbm" => "image/x-xbitmap",
".xpm" => "image/x-xpixmap",
".xwd" => "image/x-xwindowdump",
".css" => "text/css",
".html" => "text/html",
".htm" => "text/html",
".js" => "text/javascript",
".asc" => "text/plain",
".c" => "text/plain",
".cpp" => "text/plain",
".log" => "text/plain",
".conf" => "text/plain",
".text" => "text/plain",
".txt" => "text/plain",
".dtd" => "text/xml",
".xml" => "text/xml",
".mpeg" => "video/mpeg",
".mpg" => "video/mpeg",
".mov" => "video/quicktime",
".qt" => "video/quicktime",
".avi" => "video/x-msvideo",
".asf" => "video/x-ms-asf",
".asx" => "video/x-ms-asf",
".wmv" => "video/x-ms-wmv",
".bz2" => "application/x-bzip",
".tbz" => "application/x-bzip-compressed-tar",
".tar.bz2" => "application/x-bzip-compressed-tar",
# default mime type
"" => "application/octet-stream",
)
# Use the "Content-Type" extended attribute to obtain mime type if
possible
mimetype.use-xattr = "enable"
## send a different Server: header
## be nice and keep it at lighttpd
server.tag = "lighttpd"
#### accesslog module
accesslog.filename = "/var/log/lighttpd/access.log"
## deny access the file-extensions
#
# ~ is for backupfiles from vi, emacs, joe, ...
# .inc is often used for code includes which should in general not be
part
#### accesslog module
accesslog.filename = "/var/log/lighttpd/access.log"
## deny access the file-extensions
#
# ~ is for backupfiles from vi, emacs, joe, ...
# .inc is often used for code includes which should in general not be
part
# of the document-root
url.access-deny = ( "~", ".inc" )
$HTTP["url"] =~ ".pdf$" {
server.range-requests = "disable"
}
##
# which extensions should not be handle via static-file transfer
#
# .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
######### Options that are good to be but not neccesary to be changed
#######
## bind to port (default: 80)
server.port = 8080
## bind to localhost (default: all interfaces)
server.bind = "flvideo.x.com"
This is the weird part, if we lynx x.com:8080 it will display the html file inside the docroot, if i go x.com:8080 on firefox or internet explorer the connection gets reset and internet explorer throws a "cannot display page" error,
I am paying around 15 bucks for 1.0TB bandwith in a shared hosting.
i thought of getting a vps for the site, and just stream videos from the shared hosting server....
the problem would be users uploading videos, is it possible for them to upload files through VPS, and onto the shared host ?
I got a new hard drive. After just completing the wonderful instructions on how to rename video files on the server, the new hard drive has just "misplaced" over 1200 of my exclusive videos!
I didnt erase anything, but now the hard drive can only see upto a certain letter, all after that has gone.........is there any way this hard drive can restore these files? its getting ridiculous now
I have been having soooo many issues with this new server
It is nothing against my host; but now the videos aren't loading or loading so slow
What could be the issue? It would have to be a server issue, correct?
The site is nsfw but it is ftw (hint hint) , it is an adult site and I don't know if
I've got a VPS which is serving as the main server for a number of sites. Web Server, SSH Server, and Mail Server.
What I've got running:
Apache2, PHP5, MySQL5, Dovecot, Postfix
One of the sites is a growing forum with a MASSIVE photo album. This is the site where I notice the most slowness.
Changing the server software is not an option - Only optimization.
Quote:
Originally Posted by httpd.conf
ServerTokens OS
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
Timeout 300
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
StartServers 8
MinSpareServers 8
MaxSpareServers 13
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 50
</IfModule>
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
Listen 80
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
Include conf.d/*.conf
User apache
Group apache
Quote:
Originally Posted by my.cnf
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
old_passwords=1
[mysql.server]
user=mysql
basedir=/var/lib
[mysqld_safe]
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
I looked a lot - can not find solution ....
I want to transfer a file from [url]to [url]or [url]Without it will pass my localcomputer (slow upload)
It can be also a script i will install like this one - this is only for images
[url](remote)
I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -
1) Switch on custom errors for the subscription
2) Look in virtual directories and navigate to error documents
3) Find the error in question (500:100) and change it to point at either a file or URL
FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??
URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??
I am currently running Google Analytics/Urchin 5 (v5.7.02), on a server, the server has started to act up, (on its last legs etc) and now I am trying to transfer the Urchin Software to a new server, where it would work effectively.
However upon installing the urchin software on the new server and running it (localhost:9999), I am presented with An Action Items Page, and these following choices
Obtain Demo License
Buy License
Activate Pre-Purchased License
I choose ‘Activate Pre-Purchased License’ pop in the Serial number and complete the registration then…
---------------------------------------------------------
Urchin Licensing Center -- Error!
An error has occured during your transaction, please use the back button and correct the problem. The specific error message is:
• Unable to generate a license. Some possible reasons:
Your serial code is currently active <<< How do I disable it and use it on another server?
---------------------------------------------------------
So all I want to do is deactivate the serial and reactivate it on another server.
Does anyone have experience with this or a similar problem or have a solution to this problem. Any help be most appriciated.
Or even a Contact Number so that i can get some one over the phone!
This is the scenario, domain.com are setup on server1, however server2 also has the same profile of domain.com as we use ns3 and ns4 using domain.com. This works fine with the nameserver setup on server2.
However I encounter problems as the emails from server2 won't reach server1 as there are duplicate profile on server2.
My question is how do I setup the DNS in cpanel/whm from server2 so the emails from server2 will reach server1?
Server1 (www.domain.com)
ns1.domain.com
ns2.domain.com
Server2
ns3.domain.com
ns4.domain.com
