Server Config Causing PHP Failure
May 9, 2007
I'm having a very intermittent PHP error on my dual processor CPanel/CentOS 4x box. And it happens randomly across several domains, so I know it's not a single domain problem.
I can never figure out what causes it. 95% of the time the sites work fine (no error), but ever so often my php includes give me something like this:
PHP randomly fails to find the directory/file. And it requires an Apache restart to make it work smoothly again. It will be fine for a few days, but then it happens again. So I suppose it may not be directly related to PHP, but more of a server/apache issue? Any ideas at all?
View 0 Replies
ADVERTISEMENT
Oct 24, 2009
i have wrong procedure doing to enable my SSL/HTTPS services in my vps.
First i noticed the HTTPS in my services is not running, now i'm looking to google, i found openssl website, then download the latest version and install it into my server and following the instructions, after that, i try to recompile the apache becuase i have a new updates, i found an error ssl and cannot continue to compile because of my last installation i suspect.
View 10 Replies
View Related
Jul 28, 2008
I just installed a fresh new server with CSF
Soon I find out that my ping keeps dropping. The server was smoothly running, SSH is smooth, Website are loading fine, except I cannot ping my server. I disable SELINUX completely and it still doesn't help.
When I disable CSF, my server ping are responding back!
So I remove CSF installation and reinstall CSF, the same problem appear
How can I solve this issue?
My kernel is 2.6.18-92.1.6.el5PAE running on latest version of cPanel on CentOS 5.1
View 7 Replies
View Related
Jun 18, 2008
Ever since Monday morning, my site has had problems because the server at my host is under attack.
Most of Monday my site was down. Then Monday late afternoon, it came back...I thought. The forum is up and running, but the rest of the site, built on WordPress, is screwy.
Most of the plugins aren't working because of inability to connect with the database.
I can't log in to my cPanel at all and haven't been able to since Sunday.
This is the first time I've experienced anything like this, lasting this long.
It has me wondering if I should start considering a new host. I have loved their service, especially their speedy support (native English speaking to boot) so I hate to leave but I'm not sure if their service is going a little downhill or not.
View 8 Replies
View Related
May 18, 2007
Which command do we type to see what is causing a high server load?
I've restarted the VPS numerous of times, and I wish to found out the problem
View 7 Replies
View Related
Jun 21, 2009
For the past few days, one of the server is causing a bandwidth utilization surge for the entire rack on almost daily basis. It happen for a few minutes and it went off then it will be the same thing again the next day. When the surge is happening, most of the servers on the same segment will be inaccessible for the few minutes.
The bandwidth utilization graph for my rack is recording an abnormal surge from (6mbps --> 90mbps) for the few minutes. My MRTG is showing 2 of the Plesk servers giving the problem but the NOC guys said it the Cpanel that causing the problem.
I tried logging in to both servers but could not find what's the cause for this.
View 2 Replies
View Related
Jul 17, 2008
It's been a while since I've posted in this area of the forum, but was just wondering if by now someone or some company has developed a script/software that you can install on your server that will tell you the exact area where the high CPU load is coming from, such as from someone sending email, a certain users account, and etc?
Most times, you have to be mointoring your server at the time of the high load to be exactly sure of what is causing the high load, so, I'm talking about something that will email you right on the spot of the high load in case you are away and will know what caused it.
Most I've seen only tell you that you have a high load, but don't tell you what exactly caused it.
View 2 Replies
View Related
Dec 14, 2007
My host has suspended saying my server was overloaded and sent me a log to my mail and i don't have access to cpanel also. I just have a wordpress blog and when i had contacted host through chat they told some ip might be causing this issue so ban that ip when ur account is unsuspended.
But i am really unaware of how to find which ip is causing this issue as i have little knowledge on analysing logs. Any help regarding this is highly appreciated and please leave your suggestions for me.
I am pasting the logs that were sent by host to me in mail:
Srv PID Acc M CPU SS Req Conn Child Slot Host VHost Request
0-5 22363 32/49/49 K 5.76 2 1695 583.9 0.82 0.82 76.227.169.69
GET /index.php/181/ HTTP/1.1
1-5 22365 81/81/81 W 42.69 3 0 3060.8 2.99 2.99 76.183.97.67
GET /index.php/181/ HTTP/1.1
2-5 22367 87/87/87 K 45.81 2 991 3287.3 3.21 3.21 76.183.97.67
GET /index.php/181/ HTTP/1.1
3-5 22369 2/41/41 K 2.07 8 0 15.3 0.12 0.12 67.87.117.129
GET /wp-content/plugins/postratings/images/stars/rating_half.gi
6-5 22387 0/13/13 W 2.21 57 0 0.0 0.12 0.12 81.22.20.143
GET /index.php/181/ HTTP/1.1
7-5 22388 76/76/76 W 39.94 0 0 2871.9 2.80 2.80 141.153.137.168
GET /index.php/181/ HTTP/1.1
8-5 22396 0/26/26 W 2.46 38 0 0.0 0.34 0.34 127.0.0.1
care.com GET /whm-server-status HTTP/1.0
13-5 22413 0/18/18 W 1.46 44 0 0.0 0.33 0.33 81.22.20.143
GET /index.php/181/ HTTP/1.1
14-5 22414 0/25/25 _ 0.76 55 672 0.0 0.28 0.28 71.77.3.233
GET /wp-content/uploads/2007/12/cup.jpg HTTP/1.1
20-5 22464 2/14/14 K 0.66 8 0 52.5 0.14 0.14 67.87.117.129
GET /wp-content/plugins/postratings/images/loading.gif HTTP/1.1
21-5 22484 0/6/6 _ 1.31 40 329 0.0 0.03 0.03 74.77.10.155
-care.com GET /~realrina/nun.jpg HTTP/1.1
22-5 22510 27/37/37 K 18.07 0 1832 982.5 1.25 1.25 80.195.137.10
GET /index.php/181/ HTTP/1.1
23-5 22523 8/34/34 K 1.76 8 0 94.6 0.30 0.30 67.87.117.129
GET /wp-content/plugins/postratings/images/stars/rating_on.gif
27-5 22540 0/10/10 _ 3.36 39 167 0.0 0.19 0.19 90.192.174.63
GET /wp-content/uploads/2007/10/anand.jpg HTTP/1.1
28-5 22542 1/14/14 K 1.76 8 823 151.9 0.23 0.23 67.87.117.129
GET /wp-content/themes/ProSense%20Redux/images/picture.jpg
HTTP
29-5 23481 0/6/14 _ 0.37 11 2803 0.0 0.11 0.12 82.37.128.175
radio.audio-perfection.co.uk GET /img/player.png HTTP/1.1
30-5 22584 32/44/44 K 15.47 0 1284 989.6 1.06 1.06 80.195.137.10
GET /index.php/181/ HTTP/1.1
31-5 22588 22/25/25 K 5.77 0 751 468.0 0.46 0.46 76.227.169.69
GET /index.php/181/ HTTP/1.1
32-5 23520 0/5/8 _ 0.20 19 414 0.0 0.05 0.09 72.95.237.89 pown.us
GET /images/files/36.jpg HTTP/1.1
33-5 23627 1/6/22 K 0.06 3 967 28.0 0.06 0.35 66.249.65.196
GET /index.php/category/telugu-online-movies/page/4/
HTTP/1.1
36-5 23637 2/3/6 K 0.00 3 37 0.0 0.000 0.03 83.181.190.92 akirad.net
GET /files/color/garland-9bf1a50e/menu-expanded.gif HTTP/1.1
37-5 23673 8/9/16 K 0.49 8 0 126.9 0.20 0.21 67.87.117.129
GET /wp-content/uploads/2007/12/movie_dus_kahaniyaan.jpg HTTP/1
38-5 23674 1/3/10 K 0.00 11 1536 23.0 0.06 0.15 84.57.59.109
teeth-whitening-kit.com GET /affiliate/scripts/sb.php?a_aid=17&a_bid=7
HTTP/1.1
39-5 23690 10/10/22 K 0.99 3 0 35.6 0.03 0.29 83.181.190.92
akirad.net GET /files/color/garland-9bf1a50e/bg-tab.png HTTP/1.1
40-5 23693 0/5/10 _ 0.00 44 1106 0.0 0.04 0.07 67.11.157.83
teeth-whitening-kit.com GET /affiliate/scripts/sb
44-5 23721 1/3/6 K 0.00 8 0 0.4 0.000 0.00 67.87.117.129
GET /wp-content/plugins/share-this/share-icon-16x16.gif HTTP/1.
45-5 - 0/0/3 . 0.00 39 1 0.0 0.00 0.00 83.181.190.92 akirad.net GET
/files/color/garland-9bf1a50e/menu-expanded.gif HTTP/1.1
46-5 - 0/0/5 . 0.22 22 1332 0.0 0.00 0.04 81.22.20.143
GET /index.php/181/ HTTP/1.1
47-5 22780 51/52/52 K 26.66 0 940 1927.2 1.88 1.88 76.183.97.67
GET /index.php/181/ HTTP/1.1
48-5 - 0/0/3 . 0.00 37 6786 0.0 0.00 0.02 81.22.20.143
GET /index.php/181/ HTTP/1.1
51-5 - 0/0/13 . 0.26 35 34109 0.0 0.00 0.06 71.77.3.233
GET /favicon.ico HTTP/1.1
54-5 23746 2/3/3 K 0.51 3 0 0.0 0.02 0.02 83.181.190.92 akirad.net
GET /files/color/garland-9bf1a50e/menu-leaf.gif HTTP/1.1
55-5 23747 0/0/0 W 0.00 20 706795599 0.0 0.00 0.00 81.22.20.143
GET /index.php/181/ HTTP/1.1
56-5 - 0/0/3 . 0.00 16 4868 0.0 0.00 0.00 66.7.206.192
care.com GET /serverstats_inc.php HTTP/1.0
57-5 - 0/0/5 . 0.09 44 0 0.0 0.00 0.01 195.13.38.198 (unavailable)
POST /users_adm/start1.php HTTP/1.1
58-5 - 0/0/1 . 0.00 24 1640 0.0 0.00 0.02 81.22.20.143
GET /index.php/181/ HTTP/1.1
61-5 - 0/0/2 . 0.07 12 10194 0.0 0.00 0.01 172.188.47.93
radio.audio-perfection.co.uk GET /play_wmp.php HTTP/1.1
View 5 Replies
View Related
Oct 10, 2012
- Apache version : 2.2.21
- operating system : MAC OS Lion Server
- mod_ssl : 2.2.21
I have a certain area on a homepage which is protected by an .htaccess file. The code of the .htaccess file is the following:
Code:
AuthType Digest
AuthName "Password Required"
Options +Indexes
# code for HTTPS
RewriteEngine On
RewriteCond
%{SERVER_PORT} !^443$
RewriteRule (.*) https://%{SERVER_NAME}%{REQUEST_URI}
Require valid-user
Usually everything has been working fine with this .htaccess-file until today. There hasn't been any change on the system.
If you click on the hyperlink to the restricted area the login window appears where you need to type in your username and a password. After typing in these data the following message appears in the browser:
500 Internal Server Error
The server encountered an internal error or
misconfigruation and was unable to complete your request. (…)
The apache error log file contains the following message:
Request exceeded the limit of 10 sub request nesting levels due to probable configuration error.
Use 'LimitInternalRecursion' to increase the limit if necessary.
Use 'LogLevel debug' to get a backtrace.
The increase of the LimitInternalRecursion does not solve the problem. So I switched the LogLevel in the httpd.conf file from warn to debug and looked again on the entries of the error log.
The following appeared (I have replaced ip addresses, usernames and URL by xyz or <URL>) :
Code:
[error] [client xyz]
mod_digest_apple: Client is using a nonce not issued by this server for this context:/rb/Vorlesung/WS12/Downloads/, referer:
http:<URL>
[Code] ....
View 3 Replies
View Related
Sep 1, 2007
I got a RHEL dedicated server it has Ensim Ensim Pro 4.0.3-22.rhel.3ES
I got a few email accounts over quota limit. Even though it reached the quota the still consumes mail.
the size keeps increasing until HD space runs out.
I checked other forums and they recommended to
do this
find /home/virtual/site#/fst/var/spool/mqueue/ -exec rm -f {} ;
I did this but there were no files in there to begin with.
So every hour i keep getting this failure notice.
This is a report generated by the hourly run of MailQueueCleaner. Some sites on this server have problems which prevent the processing of their email queues. UNTIL YOU RESOLVE THE PROBLEMS, THESE SITES WILL NOT BE ABLE TO RECEIVE EMAIL. A summary of the problems is included below.
sites over the quota show up here.
I just want to be abl to clear the mail out of selected accounts without logging in the account. I am sure it is some file to clear.
View 1 Replies
View Related
Apr 22, 2009
I just want to use a server for file sharing, it will have nginx and that's it. I'm looking at centos, or freebsd, but I been using centos forever now and I'm not sure how to use freebsd, should I just stay with centos?
Do I tell my hosting provider to just install the OS and give me ssh action and that's it? Don't install any control panels or any other stuff? I want one domain and one subdomain on it though and ftp action.
View 8 Replies
View Related
May 26, 2007
Got a new box, Xeon 3060, 2GB memory, 2x250 SATA II drives. I have 1 mysql/php forum with about 60-70 users online and 1 multimedia download site.
the minimum configuration for Apache httpd.conf ? I just need a starting point to optimize.
View 6 Replies
View Related
Mar 4, 2007
I get the following message in my email:
"S.M.A.R.T Errors on /dev/hda
From Command: /usr/sbin/smartctl -q errorsonly -H -l
selftest -l error /dev/hda
ATA Error Count: 1
Error 1 occurred at disk power-on lifetime: 7712 hours (321 days + 8
hours)
----END /dev/hda--"
View 8 Replies
View Related
Jun 25, 2009
i have just installed Config server firewall on a linux server
i need to enable some ports, how can i do that?
View 3 Replies
View Related
Jan 20, 2008
What is the best and cost effective way to setup multiple web servers to talk to 1 data base server?
Hardware Load Balancing or software?
View 8 Replies
View Related
Aug 27, 2008
I am currently selling hosting from my reseller account. Planning to buy a dedicated server. I will be hosting around 250 hosting accounts with PHP and Mysql on a centos 5 OS with Cpanel. The 250 sites will be controlled by normal terms and conditions that comes with shared hosting. Now I am confused about the configuration to go for:
My Budget is around USD 200 per server.
Here is the config I thought to go for initially:
Xeon 3060 Dual Core
2 x 250 GB SATA II HDD
4 GB RAM
Cpanel/WHM
10 MBPS Port
Then I found this config for 20$ extra.XEON 3220 Dual Core
2 X 250 GB HDD
4 GB RAM
CPanel
10 MBPS Port
will 3060 is a good config or do you think should go for the 3220. Or should I save that extra 20$ and use them to get a hardware RAID 1 for 3060 server...?
View 9 Replies
View Related
Aug 9, 2007
I'm about to purchase a new Xeon dedicated server, however I'm unsure whether to opt for a RAID 1 configuration on the two 320GB SATA drives. Can this decrease performance in anyway or only increase? I run an extremely resource hungry site utilising audio/video en/decoding, running vBulletin so anything that might negatively affect performance could have a big impact.
Secondly, I'm unsure on whether to opt for CentOS 5 over 4.5. I'll be using cPanel of which I've heard there have been problems with the latest release of CentOS.
And finally, is it worth upgrading to Apache 2 and MySQL 5 (which I know is installed as default on CentOS 5)? The reason I ask is that I've heard of server load problems after upgrading to these latest versions on high traffic sites.
View 1 Replies
View Related
May 30, 2008
As I have never used cPanel neither have whatsoever experience with control panels, in the process of ordering a couple of new server I am wondering what's the average recovery time after a server failure which involves data (ie. disk failure).
I am interested to understand this, because I need to choose between hardware raid or backup disk.
For example, at LiquidWeb (this is just one of the many managed providers i am evaluating) you can pay the same server 264$ with 2x250 hardware raid 1, and 219$ with 2x250 simple hard drives, where the second one is supposed to be a backup drive.
I am yet to ask, but on this servers most likely (at this prices) they do not have hot swappable disk drives where they can rebuild the array "live", so also if i choose raid hardware, in case of a disk failure, i face a downtime to bring down the server, rebuild the array, bring on the server, which I guess is something not less than 30-60 minutes downtime.
The advantage of this solution is that a disk failure keeps the system running, so you can schedule a maintenance window to replace the disk and rebuild the array, I guess.
On the other side, relying on a backup disk (and of course rsyncing data to an offsite server, i would do this anyway) you save 45$ each month, and disks after all do not fail every month.
If the main disk fails, they need to replace the disk, install again the server with what I suppose being a standard image (so let's figure a couple of hours, as they have a 30min hardware replacement sla), then you need to restore backups (which in my case are something like 20gigs). So I guess, on an average, it would take something like 4 hours downtime.
Am I correct ?
What would you reccomend as a solution with cpanel, taking into account the huge price difference ? Backup drive or Hardware raid ?
This would be for a single big website, not a hosting-company with resellers and customers environment, so I would value more the monthly saving, rather than the high availability, but of course I am interested to know what is the average time to recover a cpanel server after a drive failure.
Besides I have also another question, as I have never had a colocated server with raid hardware, so i do not know anything about this.
When a drive fails in a raid1 hardware environment, how the hosting provider gets notified ? I suppose it's not a led on the server to blink, as no one would see it.
So if you have software raid (like my computer at home) you get an email from mdadm with "warning, array degraded", so you know it quick and you can check it anytime doing a ' cat /proc/mdstat '. What about hardware raid?
My fear is that nobody notices my raid1 drive failure, the server keeps going on just a drive, then maybe the other drive fails, and it would be unpleasant: while a single drive failure would be obviously very easy to spot for me.
View 2 Replies
View Related
Mar 8, 2007
after a number of hours I finally got myself an SSH connection to my Linux server. I created an account with bin/bash access, whatever that is, and got in. Phew, this is all new to me!
I can get to the ./configure prompt and all looks well when I type command --enable-magic-quotes but I refresh my phpinfo() and nothing has changed.
All I want to do is install Joomla!
My Joomla! installation tells me to action following: Set PHP magic_quotes_gpc setting to ON
Set RG_EMULATION setting to `ON` instead of `OFF` in file globals.php
Display Errors should be on
Register Globals Emulation should be off instead of on
It's also telling me that the var/lib/php/session is unwriteable. Do I need to get shell access and command to do that too?
View 5 Replies
View Related
Jul 31, 2008
Can anyone with previous exp. in Video Hosting/Streaming provide me some info on THE CONFIG AND BANDWIDTH REQUIREMENTS FOR ffmpeg hosting for youtube like site?
Here are the basic things-to-know & Server(s) Funtions:
1. Do Video Conversions from AVI, MKV, etc to FLV/MP4
2. Stream out these videos for viewers.
3. Expected Traffic: Quite High (1 Million Visitors/mo)
So can anyone suggest me the most suitable Server Config, Bandwidth (I'd prefer dedicated-unmetered b.w) and Host for this?
Also can anyone provide me info on the amount of video conversions and traffic a single server (with your recommended config) can handle?
View 6 Replies
View Related
Aug 7, 2014
I have a little problem configuring the mail server in Plesk 12. I bought a VPS with Plesk 12 is hosted in OVH.es just for learning. I've got an external domain in OVH.es from 1and1.co.uk. The domain is properly configured and all is working well but the mail server.In OVH.es manager I can't create emails for an external domains (it is not allowed), only redirections. This is how it is in the manager: .domain.com MX 1 Redirecciones redirect.ovh.net.Support OVH.es told me that I can configure within plesk 12. I suposse it is in zone DNS but I don't know how to do it.
View 1 Replies
View Related
Jun 12, 2015
I'm on plesk 12.0.18 and i would like to backup my server config. I have an error Logging::error('Available disk space () is less than required by storage bund...', 'fatal') called at /opt/psa/PMM/agents/shared/Storage/Storage.pm line 523
[URL] ....
the function un cat /usr/local/psa/PMM/agents/shared/HelpFuncs.pm is like that
Code:
sub getMountSpace {
my $mount = shift;
my $df = qx( df -P -k $mount) or die $!;
while ( $df =~ /^(S+)s+(d+)s+(d+)s+(d+)s+(d+\%)s+(S+)$/gm ) {
[Code]...
We've unchecked the disk space verification in backup settings with no more results ...
is it a way to launch the function reserveSpace and/or getMountSpace helper in shell ? to see the returned value ?
or can i launch /usr/local/psa/bin/pleskbackup server -c comand line to backup only the config ?
View 4 Replies
View Related
Dec 5, 2014
I have plesk11.5 and found a big security bug in my script because plesk11 do a strange behavior:
[REMOTE_ADDR] => 95.*.*.*
[SERVER_PORT] => 80
[SERVER_ADDR] => 91.*.*.*
[SERVER_NAME] => domain.com
[SERVER_SOFTWARE] => Apache
[REMOTE_ADDR] => 2003:67:4b4b:*
[SERVER_PORT] => 80
[SERVER_ADDR] => 127.0.0.1
[SERVER_NAME] => domain.com
[SERVER_SOFTWARE] => ApacheClick to expand...
View 4 Replies
View Related
Nov 28, 2006
I have a 2003 SBS server with about 50 users on exchange. It is a standalone DC - all the users connect with 'profiles' and 'docs' on the server and use exchange thru outlook..when they leave the office they VPN in and exchange works like a charm.
Problem is for a quick setup I've used the POP 3 connector and kept the emails hosted on my server - I want to get rid of the POP3 connector setup altogether and have mail delivered directly to the server.
Can someone give me a walk thru of steps to do this - so far I have fgured out that I have to add the domain to the recipient policy - configure it properly and then setup each user to receive email for that username and it will just work....
I want to be sure and was hoping that someone who has done the same thing could point me to an accurate tutorial of sorts.
View 0 Replies
View Related
Jun 15, 2009
On a rhel 5.3 + cpanel server, i have a time problem.
Web apps, as joomla show articles with a -2 hours time difference, or even webmail clients like roundcube are showing a wrong time when an email arrives. It seems this apps are not picking up the server time.
Both things (joomla and webmail) should use the configured server time.
I know Joomla can be fixed using the time zone option, and webmail too.. but in a server with over 300 websites, there are many joomlas installations and even more mailboxes...
/etc/sysconfig/clock have the right time zone.
View 12 Replies
View Related
Nov 25, 2008
I've added this:
# Added for me
hostlist privaterelay_hosts = lsearch;/etc/privaterelay
And changed this:
accept hosts = +relay_hosts
Into this:
accept hosts = +relay_hosts +privaterelay_hosts
within the Exim Advanced configuration editor. Cause I wish to allow a relay without authentification.
This morning, I've got this:
cPanel was unable to automatically merge your Exim configuration with the new settings that shipped with the build you have installed (11.23.6-RELEASE_27698) because you have a custom ACL configuration which cannot be automatically configured.
To avoid any mail downtime, we thought it was best to leave your previous configuration intact until the new configuration can be properly installed. In order to complete this configuration update, you will need to manually merge your configuration with the new
configuration settings. Please follow the steps below to complete this update:
1. Enter the Advanced Configuration Editor
2. Notate any custom changes you have made in the ACL section. You may also which to make a copy of /etc/exim.conf.local and /etc/exim.conf.localopts as custom settings are contained in these files.
3. Click the 'Reset ACL Config to Defaults' button.
4. Reinstall your advanced custom settings.
Until you manually complete this update, automatic spam filtering may have been rendered inoperable to prevent any mail loss. (This generally only applied is you were upgrading from cPanel 10.x)
Current Config Version: unknown
New Config Version: 4.900000
What can I do to prevent this ? Cause last time, all mail was receiving a 550 (SMTP Protocol Returned a Permanent Error 550 Sender verify failed) which is pretty bad...
View 0 Replies
View Related
Jul 6, 2009
Now I'm looking at our last cpu_exceeded_logs file and there is long list point to "/ramdisk/bin/php5" which I don't know much about it or don't know how to deal with that. would you please tell what exactly it means and what should I do to avoid it?
Example of my last cpu_exceeded_logs file:
Quote:
Mon Jul 6 00:34:50 2009: used 0.77 seconds of cpu time for /ramdisk/bin/php5
Mon Jul 6 00:34:50 2009: used 0.50 seconds of cpu time for /ramdisk/bin/php5
Mon Jul 6 00:34:50 2009: used 0.80 seconds of cpu time for /ramdisk/bin/php5
Mon Jul 6 00:34:50 2009: used 0.55 seconds of cpu time for /ramdisk/bin/php5
I can't find the cause of problem when look at /ramdisk/bin/php5.
View 5 Replies
View Related
Jun 29, 2008
Can someone figure out by the screenshot, if my CPU is really
97% iddle, and what can be causing these average load numbers?
View 14 Replies
View Related
Jun 2, 2008
I'm running a message board and it looks like I've outgrown the low end xeon 3040 1.86GHz dual core server, and the bulk of the CPU load is going to mysqld. I'm debating between offloading the DB to a dedicated server vs upgrading the existing server and hosting the web server and db on the same machine.
Any thoughts on the better approach? fwiw, the load from apache seems next to nothing right now, but I am also planning on adding an SMTP server for user registrations and general support email.
I'm also not super familiar with dual-core and dual processor machines. Does shifting mysql to a dual core or dual proc machine help (vs a single core/single proc machine)? since there is just one mysql daemon, does having a second core or proc. buy me anything?
View 10 Replies
View Related
Jul 14, 2009
In my server iowait is causing high load, how do we find out which are all users taking memory that could cause my server to use swap memory.
server : linux centos/Cpanel
I have tried the below commands, but how do we locate user specific,
ps aux --sort -vsz | head -25
vmstat 1
View 7 Replies
View Related
