I've had a dedicated server or two for a while now. Recently I have been asked to see if we can host an accountancy program (Dimensions) offsite and have people access it remotely.
I am toying with the idea of getting a dedicated Windows server and running xenapp or the windows equiv (I work for a charity so budgets are tight).
Has anyone tried running Citrix xenapp or Metaframe on a dedicated server?
I have windows servers that I'll be co-locating very soon. I have purchased a Dell 2161ds-2 and an APC remote boot power strip. Could someone please tell me the best way to secure remote access to these products. Do I put them on public IP's and allow them through the firewall or do I put them behind the firewall and access them after I authenticate through the firewall.
View 6 Replies View RelatedI am hosting a website that I can access perfectly from most internet connections but not from my college network..
Normally I am asked for a user name and password on my site, normal.
When I am browsing from my college network the page just throws up HTTP error 401.2
From my understanding it means that the server(iis) is setup wrong but I can access it from anywhere else..
I can access FTP, SSH and httpd is showed as running when i check with 'httpd status'. Memory ram has half of them left(except that swap is 0,0).
I can't access my site via browser
Why tried restarting
[root@web2 ~]# service httpd start
Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
[FAILED]
[root@web2 ~]#
I have an Ubuntu server and have installed AMP. The server is behind a router (2wire).
I have a static IP address which i use for the webserver. I have enabled the router firewall to allow all the typical webserver ports. When I am on the network (in the vicinity of the network) i am able to connect wirelessly to the server via ssh and also access the domains via my web browser.
But when i connect to the net via another router I am unable to gain ssh access or access the websites from a browser.
When i initiate a connection with putty all i get is a black screen and when i connect to the website i get
Quote:
The operation timed out when attempting to contact www.globalexpatservices.com.
I have a Ubuntu Lamp server setup in my building which is used for development purposes.
So I also have phpmyadmin setup and am using a Mysql Query browser and Mysql Administrator desktop programs to administor the database on the server. However I am not able to connect to the server from my desktop. I am able to login to my myphpadmin but not able to login via the Mysql Query Browser program.
Hopwing someone can help. I have read about port forwarding and also read a post about editing the my.cnf file on the server and changing the Bind-Address= 127.0.0.1 to the actual hostname but before I start editing the actual configuration files on the server I want to see if their is another way as I am worried that if I change the me.conf file that the phpmyadmin may stop working?
Can anyone tell me which hosting allow remote access of mysql?
View 10 Replies View Relatedif there's an OS where that is possible?...i'm probably in the wrong section at this point, but i was thinking about using Remote Desktop to accomplish this...something like a Virtual Private Network... but i don't have XP pro or any other system that could act like a server...
my goal is to allow staff working off site to easily access files through windows programs like ms word or ms excel to save, edit, etc -- files would be located on the web server or on a network computer on site (not necessarily a network server)
how I can setup Remote Access Between 2 Cpanel servers to be like this :
from Server A to Server B ( not ask for password )
from Server B to Server A ( must ask for password )
I would like to setup my server to allow remote access from home. It's on an office network which is separated from the WAN by a router. So long as I'm on this network, I can access the server from any computer connected to it. I enter the https URL of my server through IE and it brings me to the helm interface (the one that comes with Windows Server 2003). I can click on Maintenance and then on Remote Desktop, and it opens a new window with the server's desktop displayed.
If I'm somewhere other than the office network, I can't access it. IE gives me a "can't find webpage" message (or something along those lines). How do I setup my server to access it from outside the office network. I'd prefer to have a similar graphical interface as Remote Desktop.
I have successfully installed dns only to my vps. the problem is when i try to add it to the cluster system on my other vps it asks for a remote access key, so i visit both ip:2087/scripts/setrhash and ip:2086/scripts/setrhash and it shows an unable to connect error in firefox.
this is both using [url]
does anyone know how i can access the remote access key?
Does anyone have an expierence with remote access servers/gateways for providing VoIP and dial services? What would you recommend?
View 2 Replies View RelatedI am currently accessing Serers through remote desktop (windows 2003). To be on the safe site, i like to allow only 1 IP to access through remote, even better would be through one specfic domain or subdomain.
I have already changed the port number, but still like to have this additional feature.
I have subscribed an account in Powweb but since the Powweb does not allow MySQL remote access I need to find another hosting that allow MySQL remote access.
Wich hosting with MySQL remote access do you know?
does any one have any advice on choosing a free remote desktop which runs on mac osx to access my vps via the internet , which i recently acquired.
View 7 Replies View RelatedI have an outsourced project where someone from India is developing a program for me but we keep running into a problem that I can't find the solution too.
Every time we try to use our program to access one of our private squid/proxy server we receive an error back.
Type: System.Net.WebException
Message: Unable to connect to the remote server
Our VPS is a windows 2003 server and I'm pretty sure that one of the services is blocking the program or anything from accessing a remote server. By the way I disabled the firewall and I'm still having problems .
I have a VPS and about 140 accounts on it. I've also got cPanel and WHM installed. I'm moving to a new host, but the thought of having to move all these accounts manually really makes me lazy I have to go into each account and go to backup -> backup to remote FTP, and yeah..
Is there any way I can mass backup all of my accounts, or all accounts I select, to a specified FTP server?
I only have root access on my VPS, but not on the server I'm moving all the backups to..
I seem to have an error with backing up to my personal FTP repository. I have only just noticed the issue, but i believe it originated when I upgraded Plesk Panel 11 to Plesk Panel 12. I am currently running version 12.0.18 on Cent OS 6.5.
Note whether i check the "Use passive mode" option makes no difference to my problem.Below is what I get from the panel.log under /usr/local/psa/admin/logs
Code:
[2014-11-20 19:49:44] ERR [util_exec] proc_close() failed
[20-Nov-2014 19:49:44 UTC] PleskUtilException: '/usr/local/psa/admin/bin/pmm-ras' '--check-repository' '--dump-storage=ftp://USERNAME@IPADDRESS/MYFTPDIRECTORY/' '--use-ftp-passive-mode' failed with code 121.
stdout:
Transport error: unable to list directory: Curl error: Access denied to remote resource
stderr:
file: /usr/local/psa/admin/plib/Service/Agent/Transport/Local/Exec.php
line: 57
code: 0
trace: #0 /usr/local/psa/admin/plib/Service/Agent/Transport/Local.php(60): Service_Agent_Transport_Local_Exec->process(0, Object(Service_Agent_Command_Exec), Object(Service_Agent_Transport_LocalTransaction))
[code]....
How can I allow only one ip or a list of ip addresses to access port 8443.I need to limit access this port to few ip addresses and not everyone
View 6 Replies View Relatedhow to transfer file(s) from remote server to remote ftp using ssh(on remote server)?
View 3 Replies View RelatedI found a great little app called ID Shutdown Manager which bascially lets you do stuff like wake on LAN, Shutdown, Log Off etc.
The App also has a cgi script which you can call from a web server so you get a web interface to the program.
This is exactly my reason for getting the app as I just wanted to host a web page where I could login from the internet and wake on lan my media PC.
Ok so...
The app gives you all the iis or apache setup instructions and tells you to place the cgi script which is actually a .exe into the scripts folder and then enable basic authentication for it.
Done.
So if I navigate to <SERVER>/scripts/sdmancgi.exe its supposed to give me a user / pass prompt and then when login successful I see the app and can wake on lan etc.
ok I have got this to work
on the actual machine where server is running I can access it in IE7 by localhost etc.. and it works
However when I try to access from another PC in my lan by typing <SERVER>/scripts/sdmancgi.exe I get a nice little message saying the content cannot be displayed you may require to insall a program or something to display it.
If I try to access the page from firefox on same remote PC, it works!
I can also access page from outside my LAN, it works on my N95 browser.
Also I have had friends try it from firefox from the Internet and they say it works as well.
Forgot to mention I am running on port 8081 as I already have other servers running on 8080 and 80 (one is my router and the other server installed itself from setup.exe and I dont know what server its using)
I have also tried latest apache server as well as some other free one. Both have the same effect. Ok in firefox, not in IE.
One would think its a problem with the cgi file not compatible with IE7 however, I even tried to go to default page setup in IIS <SERVER>:8081 and I get the same message. So at this point the server hasnt even tried to access CGI or prompt for Basic Authentication.
I tried googling and not much luck. I read something about CSS and when I view source of failed web page from IE7 it mentions something about CSS so dont know if this is it?
I'm having trouble with a vps and the ips won't ping and can't connect via ssh.
I can via hypervm console when I run apt-get update but it doesn't download anything.
I want to purchase a dedicated server onwhich I can set up XEN and make few virtual machines.
how to manage backups - get a sepeare machine and configure it as a NAS, use R1Soft backups etc.
I recently signed up for a VPS server with 512 MB of RAM. I will be hosting two sites on this VPS server. One is not online yet and I just have a Coming soon page up. The other is a Wordpress blog that is running. I don't have any users yet. But my VPS server is currently using ~410 or my 512 MB. This is with essentially nothing running yet. Does anyone else run their websites with only 512 MB or do I need to upgrade to at least 1 GB? I also checked out which processes are taking up the most
(% wise):
5.6 1 /usr/bin/spamd
5.4 2 spamd
3.8 1 /usr/bin/python
3.4 1 /usr/sbin/mysqld
1.7 1 /usr/local/apache/bin/httpd
1.7 1 cpsrvd
1.7 1 cpdavd
1.6 1 /usr/sbin/restorecond
I know I can't disable apache but what about the others? Spam Assasin is disabled in the WHM but the process restarts even after I kill it. Is Python necessary? I am using php apps..
after compiling rtg, I run this
/usr/local/rtg/bin/rtgpoll -v -t targets.cfg
and see the data is collected already. However, I cannot keep ssh window all the times. So, how to run rtg automatically as daemon?
