I've just migrated server to server but I didn't use the migration manager, I simply backed up each domain's content and restored those backups on the new server.
The issue I have run into is the scheduled tasks at the admin level (Tools & Settings > Scheduled Tasks) work but any schedule task under a domain do not. The scheduled tasks under the domains show as inactive (no green tick) and when I click to enable them, I get the following message
"Information: The scheduled task Google Product Feed Daily Scheduled Task was switched on."
If I then look at the page, even though the above message says it is, the scheduled task is still not enabled. Going into the scheduled task and switching it on there results in the same message, but it doesn't switch on.
How to rebuild all of the scheduled tasks within Plesk?
after creating a new cron job, when i try to open Scheduled Tasks i get this error :Internal error: DateTime::__construct(): Failed to parse time string (2015-05-28 0.12:0:37) at position 17 ): Unexpected character
Message DateTime::__construct(): Failed to parse time string (2015-05-28 0.12:0:37) at position 17 ): Unexpected character File Helper.php Line 143 Type Exception
How can I make it so only the system (scheduled task or the server itself) can access to the file to execute it. I tried placing CHMOD 700 to the PHP file but everyone is still able to access to it and executive it.
The CRON service is running and works correctly, the Scheduled tasks on the administration Plesk Panel (tools & Setting / Scheduled tasks / root user) works ok, but when a customer sets a new scheduled task from her domain panel, don't works.
I'm new to Parallels Panel. I use version 11.0.9. I want to backup mysql database daily. First of all, what is the best way for daily database backup in plesk. I'm trying to do this in Scheduled Tasks and I use mysqldump command although I'm not sure.
I chose the time and day first and then I switched on the task. I typed the following command to Command line.
This created only a blank file. When I use this without gzip, nothing changes.
1- Is mysqldump right command for database backup? 2- Should I define full path for mysqldump, gzip and database? If so, how can I find out the full path of mysqldump, gzip and my database? Because I can't see their locations in panel. 3- I can't see any error message. There is not any log file in httpdocs folder. Where does the log file exist? 4- It is weird but should the username be "database user" or should I write "root" ?
I am running Plesk 12 on CentOS 7 64bit. I have set up the server backup instead of the website backup as I assume that will backup all server settings, as well as the website? I am running Plesk Web Admin Edition.
I have the backup set to run and dump into Personal FTP, but it does not run. If I run the backup manually, everything works great, but the scheduled backups don't work.
workaround 1) rpm -q --scripts psa-backup-manager | sed 1d | sh 2) /etc/init.d/crond restart
my error message with CentOS 5.8, Plesk 11.0.9 MU#4 sh: line 2315: syntax error near unexpected token `(' sh: line 2315: `preuninstall scriptlet (using /bin/sh):'
/etc/cron.d/plesk-backup-manager is created
why do not work after you upgrade the backup cronjobs?
on one of our Plesk-Servers (Plesk 12.0.18 Update 34 on Debian 7.6) the scheduled backup stopped working. Scheduled Backup is active in Backup-Manager, but it's not executed.
I'm having troubles getting the global scheduled backup task to work at Home > Tools & Settings >Backup Manager > Server Repository.
At a subscription the scheduled backup works how it should.
Home > Subscriptions > example.com > Websites & Domains > Server Repository
The problem is as follows: When I set the scheduled task at a specific time example 00:00 it does not run at all. But when I just do "Create a backup" it does work...
I've done [URL] .... and everything in here is configured how it should be.
This is my configuration for scheduled task:
Cronjob is placed in : /etc/cron.d/plesk-backup-manager-task
Also did run: rpm -q --scripts psa-backup-manager | sed 1d | sh
This problem is only in the global backup configuration.
I have setup Backup Manager to backup Files and Configurations every week for every subscription. This worked really good however we are now considering changing this to daily basis.
As the free space on server will decrease. I was wondering i there is any way with cronjobs how to remove the backup older than 24 weeks. How to make such an cronjob script?
If possible i also would like to know where the Backup Manager physically stores its backups?
I have an issue with my daily backup. I configured to have a daily backup on an external FTP server. Everything looks to work correctly but in the panel I see that the task is a 100% forever. Never finishing completely.. So the next day, the task is not starting.. I have to remove manually the task in backup manager screen.
here is the last lines of the log file (in /var/log/plesk/PMM/backup-2015-01-20-20-46-02-824)
My Centos server running Plesk12 is running scheduled backups every sunday 3AM.
The backup is configured so that it's created as a multivolume backup with a volume size of 2047MB.
The backup is placed on my Personal FTP repo (another plesk12 server mounted with big storage).
The backup content is configured to backup server config and content (all).
The problem I have is when the backup is running I can see that it creates the volumes and stores it locally. After it send all the volumes the the external FTP repo it will delete the local (tmp) data. See my attached screenshot for storage health during backup.
Is this behaviour normal? This way we can never run a backup to an external FTP repo when our server passed 50% storage. Is it not normal to:
- Create a volume - Send it to FTP repo - Delete volume locally - Repeat until done
I'm problem with crone sender email. I changed the version of the panel from 11.5 to 12. After start the corne and sehedule task in one of users I recived email. The crone task starts from email.
For this example, I replaced the user name in Plesk Panel, which is assigned cron jobs on “support”.
This is the mail system at host servername.domainname.
I'm sorry to have to inform you that message could not be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can delete your own text from the attached returned message.
The mail system
<-f@domainname> (expanded from <-f>): bad address syntax <support@domainname>: Host or domain name not found. Name service error for name=support.domainnametype=AAAA: Host not found
After installing a separate SSL to domain.com and www.domain.com, for some reason host.domain.com, which is the subdomain for plesk login, isn't being secured by FTP when choosing "Secure Plesk" after choosing the correct SSL. No error occurs, nor does the dashboard respond to it. It stays the same and unsecured. I tried rebooting server, restart services, etc.
I am unable to connect over TLS/SSL using my FTP client. I have ports 989 & 990 enabled in my server's firewall. My FTP client is attempting connection on port 990, but times out waiting for the server to respond. I also tried adding "TLSProtocol TLSv1" or "TLSProtocol SSLv3" to /etc/proftpd.conf, but get the same result, except that a non-TLS/SSL connection attempt then returns "server closed the connection".
Recently I configured parallels 12.x on Linode Cloud with cent OS. Using DNS Settings I added 'A' record (abc.example.com) as abc and point to IP. But the record is not propagated after 24-48hrs.
Configuration: Config server / Preferred domain for web sites / domain.tld Config hosting to domain / Preferred domain / domain.tld
Problem: I've created a primary domain.tld and work without problems I type www.domain.tld and work fine redirect to domain.tld format but I've created different alias and only work www.domain.tld format don't work domain.tld format.
In google webmastertools i see this error in domain.ltd panel
I have two servers with the exact same configuration, besides from the version of CentOS that they were running when I deployed Plesk using the autoinstall script. My first server was running CentOS 6.5 during Plesk installation. My second server was running CentOS 6.6. No 3rd part repos were installed before Plesk.
On the first server everything is fine, but on the second server I have issues with FTP. I have tried applying this fix: [URL] ....
Before applying the fix I got 530 Login incorrect when trying to connect to FTP. After applying the fix and restarting the entire server I got 550 /: permission denied
I have mine Custom billing Panel Today my Developer start code API for it by Docs that Parallels given but we got stuck on Subscription...
if we set login name and password API shows this error While creating subscription
Error 2204 Unable to update hosting preferences. Unable to check system user existence: login name is empty It happens only while creating the subscription...
Creating of user is working fine only subscription don't want work and we don't know why we tried many things and none of it works.
