Plesk 12.x / Linux :: Pagespeed Module Compatibility
Mar 16, 2015
Our server setup is like this, wordpress, vtiger crm and ecommerse applications running on plesk 12 , with apache as backend server and nginx as proxy to serve static content. Now plans are to optimize webpages with Google pagespeed module , As per google documentation, module installation on nginx server need to be build from source. Is it recommended to install ngx_pagespeed module by building nginx from source on Plesk server?
View 3 Replies
ADVERTISEMENT
Dec 21, 2014
How to install google pagespeed module on nginx and plesk 12
View 5 Replies
View Related
Jul 2, 2007
I have some linux binaries that I would like to run on a FreeBSD.
Now I understand that there is a linux compatibility layer to run these programs. If I am correct this is not an emulator, therefore there is no performance lost. Is this correct?
I want to run FreeBSD on an opteron server. There is a AMD64 version of FreeBSD, and there are also AMD64 versions of the binaries I want to run. If possible I would like to run the AMD64 versions in order to get better performance from the Opterons. Will the compatibility layer still work fine, or will it be converting to 32 bit processing, or even just giving an error?
View 1 Replies
View Related
Jul 2, 2007
I have tested the Asus M2N-MX motherboard on CentOS 5, the first 10 worked very well, zero problems and very stable.
My next 10 somehow did not work at all, after speaking to asus techs, I had to stick a 512MB ram module (which does make the motherboard work) and update the bios. Now the 1GB kingston ddr2 modules work fine.
Installed centos, and then to find out that every time the server gets rebooted, ALL eth0 settings are lost. I tested debian on it and same story! The nic is found, but debian is assigning/detecting new MAC's for the nic all the time.
The weird thing is the first batch is working very good!
I have wasted countless hours in trying to get this second batch working with no luck. I am looking to get the gigabyte GA-M61PM-S2 with RTL8211 nic. Anyone who was able to get this one running with centos without any problems?
View 5 Replies
View Related
May 20, 2014
how to enable bcmath in php.
We have a virtual server running Linux CentOS 6 with plesk 11.5 & PHP 5.4.28
So far I have found info here: [URL]
But can't get the commands to work. I'm not great with putty and the commands but learning a little.
I was also hoping that maybe updating PHP to a newer version and using the --enable-bcmath would work but where to start.
We have several websites installed on the server, some with opencart etc installed so I don't want to break the server!
This is what I get so far:
[root@louks ~]# wget rpms.famillecollet.com/enterprise/6/remi/x86_64/php-bcmath-5.4.28-1.el6.remi.x86_64.rpm
--2014-05-20 11:27:10-- http://rpms.famillecollet.com/enterprise/6/remi/x86_64/php-bcmath-5.4.28-1.el6.remi.x86_64.rpm
[Code].....
View 18 Replies
View Related
Nov 27, 2014
I need php imap extension for my server. How can I enable it?
View 3 Replies
View Related
Sep 17, 2014
How do I go about installing the spdy module for nginx? I understand it's now part of nginx 1.6 which comes with Plesk 12 but when I add the directive
Code:
listen 443 ssl spdy;
I get an error saying "nginx: [emerg] the "spdy" parameter requires ngxhttpspdy_module".
View 6 Replies
View Related
Aug 25, 2014
How do we redirect port in Plesk firewall module without touching iptables? I saw forwarding but there was no destination port.
View 1 Replies
View Related
Aug 7, 2014
I am receiving below email everyday ....
Subject : Cron <aioftp@main> /usr/bin/php -q /var/www/vhosts/domain.com/subdomains/somedir/httpdocs/dir/cron.php
Failed loading /usr/lib64/php/modules/ioncube_loader_lin_5.4.so: /usr/lib64/php/modules/ioncube_loader_lin_5.4.so: cannot open shared object file: No such file or directory
PHP Warning: Module 'soap' already loaded in Unknown on line 0
PHP Warning: PHP Startup: XCache: Unable to initialize module
Module compiled with module API=20090626
PHP compiled with module API=20100525
These options need to match
in Unknown on line 0
View 1 Replies
View Related
Feb 13, 2015
I temporarily enabled and activated Plesk firewall module (which I wish I didn't the first time) and for some reason it seems to have overwritten the default iptables configuration that was set, leaving my ftp unable to be logged into. I tried to disable the firewall module and reboot the server. It didn't work.
I also noticed that it somehow seem to have changed my hostname to my previous server hostname as well
Is there any way to completely revert back to original iptables settings before enabling the Firewall module?
View 4 Replies
View Related
Sep 2, 2014
After successful upgrade PHP, and not successful with ioncube i get:
Failed loading /usr/lib/php/modules/ioncube_loader_lin_5.4.so: /usr/lib/php/modules/ioncube_loader_lin_5.4.so: cannot open shared object file: No such file or directory
PHP Warning: Module 'ionCube Loader' already loaded in Unknown on line 0
The ionCube PHP Loader is disabled because of startup problems.
PHP Warning: Module 'ionCube Loader' already loaded in Unknown on line 0
The ionCube PHP Loader is disabled because of startup problems.
PHP 5.4.32 (cli) (built: Aug 21 2014 07:33:35)
Copyright (c) 1997-2014 The PHP Group
Zend Engine v2.4.0, Copyright (c) 1998-2014 Zend Technologies
with the ionCube PHP Loader v4.6.1, Copyright (c) 2002-2014, by ionCube Ltd., andClick to expand...
View 4 Replies
View Related
Mar 4, 2015
I have a brand new Plesk 12 Installation with just a first Subscription/Domain for my test. Enabling fail2ban jails brings me the following error for the jails plesk-proftpd and ssh. All others went on.
error 'f2bmng failed: ERROR No file(s) found for glob /var/log/secure'.
I see that /var/log/secure is missing, althoug I already used ssh and ftp to log in once. I can go to touch the /var/log/secure file or adjust the jail configs to proper log file location? Which is the way to go?Â
View 2 Replies
View Related
Jul 17, 2015
Hosting Settings
There is no php support - so i can´t change or choose running as apache module or cgi application (s. screenshot)...
OS Ubuntu 12.04.5 LTS
Panel version 11.5.30 Update #50, last updated at July 17, 2015 03:46 AM
View 4 Replies
View Related
Apr 6, 2015
I'm about to install mod-pagespeed on my webserver. i followed a tutorial but then i got an error message.
View 4 Replies
View Related
Jun 21, 2008
we need to install some perl modules in our server, how can I do it ? my server is Linux with PLESK.
View 2 Replies
View Related
Aug 27, 2008
Are there any issues I should concern about if I am using 64-bit OS?
I mean like compatibility issues with apache, MYsql, Exim or other cpanel applications! Or security scripts like firewall or mod_security etc….. With 64-bit
should I tweak something? Or it’s ok to used same configurations like the old days with 32-bit? .......
View 14 Replies
View Related
Nov 19, 2008
SAS/SATA compatibility
I am looking to buy this barebones system:[url]
View 2 Replies
View Related
Oct 1, 2007
I have bought a
PowerEdge 2900 Quad-Core Xeon E5345 2.33 Ghz Processor
2GB FB 667MHz Memory
146 GB SAS hard drive
PERC 5/i integrated RAID Controller Card
I have installed Fedora Core 6 on this.But somehow it fails to work.It keeps hanging anytime anywhere.
Can anybody help me know whether this is compatible with each other?
I tried closing some services and work it,but the attempt was in vane.
I have googled alot over this and cant get it worked.
I also tried to install from different CDs,but no luck.
View 1 Replies
View Related
Jan 28, 2007
I have an ASUS P5VD2-VM motherboard here, and i'm pretty sure i've narrowed it down to being the problem. Let me give you some background to start off with..
I've tried installing:
FreeBSD 6.1-RELEASE-i386 (with p4 chip), aswell as 6.2
FreeBSD 6.1-RELEASE-amd64 (with Pentium D 820), aswell as 6.2
XP Professional SP2 (with p4 chip)
All three installations invoke a hard-reboot (FreeBSD- last thing I see is hard drive information related...XP- Right after the EULA, to continue to hard drive partitioning).
I changed the chip from an Intel Pentium D 820 (dual-core), to a regular Pentium 4 Prescott 3.2GhZ, thinking that the dual core was making FreeBSD go all goofy...apparently that’s not the case.
I'm kind of stumped as of what to do now. It seems to be like either the IDE/SATA controller is cooked, or there is just something wrong with this main board. I tried disconnecting my SATA hard drives, and installing on an IDE hard drive without luck.
View 0 Replies
View Related
May 20, 2014
I have a freshly installed 'Microsoft Windows Server 2008 R2 Service Pack 1' VPS with Plesk 11.5.30.When installing certain applications (for example, Dolphin, Elgg), it halts with the following error message: Requirements: Apache module - The app requires the 'rewrite' web server module
When I check in Windows IIS Manager under Modules, I see RewriteModule is installed as a native module.When checking the KB about this issue: URL..it says to enable the rewrite module by ticking it in the 'Configure native modules' box.However, that module is not even listed there, even though it clearly is listed in the main module overview as a native module.
Also, in Plesk > Tools & Settings > Server Management > Panel Components, URL rewrite is also listed: URL Rewrite [Active] IIS URL Rewrite Module 2 7.2.2
View 1 Replies
View Related
Aug 18, 2014
Running task: C:ParallelsPleskadmininphp.exe -c "C:ParallelsPleskadminconfphp.ini" -dauto_prepend_file=sdk.php "C:ParallelsPleskadminplibmodulesservershieldscriptsaggregate-stats.php"
Result: ERROR - Module context is not defined
View 3 Replies
View Related
Jan 4, 2008
i´m trying to install xcache to test it on my VPS i have Zend Optimizer 3.3.0.
One of the problems i´m having is this one
PHP Fatal error: [Zend Optimizer] Zend Optimizer 3.3.0 is incompatible with XCache 1.2.1 in Unknown on line 0
And the xcache not being placed on phpinfo.
I try the fix seen in this topic (last 2 post), but didn´t work for me
[url]
There was a tech trying to install xcache but was not possible for him, another one told me that they are incompatible (xcache whit Zend Optimizer), and another one advice me that they are compatible.
View 2 Replies
View Related
Nov 20, 2007
What are the advantages/disadvantages of running PHP as Apache module vs. running PHP as CGI module on your server?
View 5 Replies
View Related
Jun 19, 2009
I have windows 2008 server with plesk 9.2 and whmcs installed, it worked well for 10-15 days but now when ever i click on create account module it just gives me "INTERNAL SERVER ERROR 500" i contact whmcs and they replied the following
------------------------------------------
I am getting an internal server error - this is being returned from your Plesk server. you should check the server error logs for the issue,
Regards,
Andrew
----------------------------------------------------
but i checked every thing looks fine example time out etc what can be the real problem? please help
View 1 Replies
View Related
Aug 14, 2008
I didn't know if it should go in here on in Web Hosting.
One of the prospective hosts I'm looking at for shared hosting uses a phrase I'm not sure about what it means and the sales person I spoke to didn't know, either (and he tried to fudge it, which is worse than admitting you don't know.)
Anyway, one of the phrases used that I haven't seen anywhere else is that they have php5 "as a module" and I'm not sure what is meant by that. Each account is running a stand-alone instance of php? php5 is a module that's installed upon customer request?
View 6 Replies
View Related
May 27, 2009
how can i chek that my iptables firewall have this module?
ipt_recent
and if it is not installed...
View 2 Replies
View Related
Oct 28, 2009
Trying to troubleshoot an exploit where the code redirecting people to exploit sites is not in the website. I think a module is being loaded dynamically, but I am not seeing the entry point in the access logs. I restart httpd and the problem goes away temporarily.
Anyone see anything fishy?
==================
HTTPD MODULES
==================
[root@xxx ~]# httpd -L
<Directory (core.c)
Container for directives affecting resources located in the specified directories
Allowed in *.conf only outside <Directory>, <Files> or <Location>
<Location (core.c)
Container for directives affecting resources accessed through the specified URL paths
Allowed in *.conf only outside <Directory>, <Files> or <Location>
<VirtualHost (core.c)
Container to map directives to a particular virtual host, takes one or more host addresses
Allowed in *.conf only outside <Directory>, <Files> or <Location>
<Files (core.c)
Container for directives affecting files matching specified patterns
Allowed in *.conf anywhere and in .htaccess
when AllowOverride isn't None
<Limit (core.c)
Container for authentication directives when accessed using specified HTTP methods
Allowed in *.conf anywhere and in .htaccess
when AllowOverride isn't None
<LimitExcept (core.c)
Container for authentication directives to be applied when any HTTP method other than those specified is used to access the resource
Allowed in *.conf anywhere and in .htaccess
when AllowOverride isn't None
<IfModule (core.c)
Container for directives based on existance of specified modules
Allowed in *.conf anywhere and in .htaccess
when AllowOverride isn't None
<IfDefine (core.c)
Container for directives based on existance of command line defines
Allowed in *.conf anywhere and in .htaccess
when AllowOverride isn't None
<DirectoryMatch (core.c)
Container for directives affecting resources located in the specified directories
Allowed in *.conf only outside <Directory>, <Files> or <Location>
<LocationMatch (core.c)
Container for directives affecting resources accessed through the specified URL paths
Allowed in *.conf only outside <Directory>, <Files> or <Location>
<FilesMatch (core.c)
Container for directives affecting files matching specified patterns
Allowed in *.conf anywhere and in .htaccess
when AllowOverride isn't None
AuthType (core.c)
An HTTP authorization type (e.g., "Basic")
Allowed in *.conf only inside <Directory>, <Files> or <Location> and in .htaccess
when AllowOverride includes AuthConfig
AuthName (core.c)
The authentication realm (e.g. "Members Only")
Allowed in *.conf only inside <Directory>, <Files> or <Location> and in .htaccess
when AllowOverride includes AuthConfig
Require (core.c)
Selects which authenticated users or groups may access a protected space
Allowed in *.conf only inside <Directory>, <Files> or <Location> and in .htaccess
when AllowOverride includes AuthConfig
Satisfy (core.c)
access policy if both allow and require used ('all' or 'any')
Allowed in *.conf only inside <Directory>, <Files> or <Location> and in .htaccess
when AllowOverride includes AuthConfig
AddDefaultCharset (core.c)
The name of the default charset to add to any Content-Type without one or 'Off' to disable
Allowed in *.conf anywhere and in .htaccess
when AllowOverride includes FileInfo
AcceptPathInfo (core.c)
Set to on or off for PATH_INFO to be accepted by handlers, or default for the per-handler preference
Allowed in *.conf anywhere and in .htaccess
when AllowOverride includes FileInfo
AccessFileName (core.c)
Name(s) of per-directory config files (default: .htaccess)
Allowed in *.conf only outside <Directory>, <Files> or <Location>
DocumentRoot (core.c)
Root directory of the document tree
Allowed in *.conf only outside <Directory>, <Files> or <Location>
ErrorDocument (core.c)
Change responses for HTTP errors
Allowed in *.conf anywhere and in .htaccess
when AllowOverride includes FileInfo
AllowOverride (core.c)
Controls what groups of directives can be configured by per-directory config files
Allowed in *.conf only inside <Directory>, <Files> or <Location>
Options (core.c)
Set a number of attributes for a given directory
Allowed in *.conf anywhere and in .htaccess
when AllowOverride includes Options
DefaultType (core.c)
the default MIME type for untypable files
Allowed in *.conf anywhere and in .htaccess
when AllowOverride includes FileInfo...
View 2 Replies
View Related
Nov 16, 2007
while am installing some programs there is some problem in my php
PHP GD Module Not Found
how could i install it in SSH root?
View 10 Replies
View Related
Mar 22, 2007
I am trying to configure a 2.6.18 kernel and I cannot get it to read the raid5 module since my system is utilizing a software RAID5.
Whenever I build I receive the following error:
[root@localhost linux-2.6.18.8]# make install
sh /root/kernel/linux-2.6.18.8/arch/x86_64/boot/install.sh 2.6.18 arch/x86_64/boot/bzImage System.map "/boot"
WARNING: No module raid5 found for kernel 2.6.18, continuing anyway
I have tried versions 2.6.18 and 2.6.18.8 and both give me the same issue.
I have CONFIG_MD_RAID456=m in my .config so the module should be getting configured.
I tried ignoring the warning but when I boot up my system in 2.6.18 I get a kernel panic error, could not sync. (I'm guessing because it doesn't have the RAID module). Everything works fine when I boot up in the 2.6.9 CentOS kernel.
View 0 Replies
View Related
