PHP Accelerator + Suexec
May 11, 2008Is there any which works with this turned on?
View 3 Replies
ADVERTISEMENT
SSL Accelerator
Jul 5, 2007Anyone have any experience with SSL accelerators? I'm trying to find a have decent, used one off Ebay or somewhere else, or even a refurb one... Seems to me that offloading SSL on one of my sites would do loads of good, but I cant find any SSL accelerators that are 1000$ or under that are < 6-7 years old....
View 2 Replies View RelatedBest Php Accelerator
Jun 22, 2007to get a php accelerator on two servers. Something that will serve my site pages faster and perhaps even cut down on bandwidth a little.
Can people recommend php accels to me?
I've seen this old page about php accels [url]but I'm not sure which one I should go with.
Can somebody help with what php accelerator I should use and any other suggestions that I can have my management company do to help speed up page load on my server?
Php Accelerator Combo
Dec 7, 2007This box is a dual xeon, 4gb memory server with a dozen domains only. What do you recommend for optimal performance and speed?
[xcache-common]
zend_extension = /usr/local/lib/php/extensions/no-debug-non-zts-20060613/xcache.so
[xcache.admin]
xcache.admin.auth = On
xcache.admin.user = ""
xcache.admin.pass = ""
[xcache]
; ini only settings, all the values here is default unless explained
; select low level shm/allocator scheme implemenation
xcache.shm_scheme = "mmap"
; to disable: xcache.size=0
; to enable : xcache.size=64M etc (any size > 0) and your system mmap allows
xcache.size = 0M
; set to cpu count (cat /proc/cpuinfo |grep -c processor)
xcache.count = 1
; just a hash hints, you can always store count(items) > slots
xcache.slots = 8K
; ttl of the cache item, 0=forever
xcache.ttl = 0
; interval of gc scanning expired items, 0=no scan, other values is in seconds
xcache.gc_interval = 0
; same as aboves but for variable cache
xcache.var_size = 100M
xcache.var_count = 1
xcache.var_slots = 8K
; default ttl
xcache.var_ttl = 0
xcache.var_maxttl = 0
xcache.var_gc_interval = 300
xcache.test = Off
; N/A for /dev/zero
xcache.readonly_protection = Off
; for *nix, xcache.mmap_path is a file path, not directory.
; Use something like "/tmp/xcache" if you want to turn on ReadonlyProtection
; 2 group of php won't share the same /tmp/xcache
; for win32, xcache.mmap_path=anonymous map name, not file path
xcache.mmap_path = "/dev/zero"
; leave it blank(disabled) or "/tmp/phpcore/"
; make sure it's writable by php (without checking open_basedir)
xcache.coredump_directory = ""
; per request settings
xcache.cacher = On
xcache.stat = On
xcache.optimizer = On
[xcache.coverager]
; per request settings
; enable coverage data collecting for xcache.coveragedump_directory and xcache_coverager_start/stop/get/clean() functions (will hurt executing performance)
xcache.coverager = Off
; ini only settings
; make sure it's readable (care open_basedir) by coverage viewer script
; requires xcache.coverager=On
xcache.coveragedump_directory = ""
[eAccelerator]
extension="eaccelerator.so"
eaccelerator.shm_size="16"
eaccelerator.cache_dir="/var/cache/eaccelerator"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="0"
eaccelerator.shm_prune_period="0"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"
;[Zend]
;zend_extension_manager.optimizer=/usr/local/Zend/lib/Optimizer-3.3.0
;zend_extension_manager.optimizer_ts=/usr/local/Zend/lib/Optimizer_TS-3.3.0
;zend_optimizer.version=3.3.0
;extension=/usr/local/lib/php/extensions/no-debug-non-zts-20020429/ffmpeg.so
[Zend]
;zend_extension_manager.optimizer=/usr/local/Zend/lib/Optimizer-3.3.0
;#zend_extension_manager.optimizer_ts=/usr/local/Zend/lib/Optimizer_TS-3.3.0
;#zend_optimizer.version=3.3.0
;#zend_extension=/usr/local/Zend/lib/ZendExtensionManager.so
;#zend_extension_ts=/usr/local/Zend/lib/ZendExtensionManager_TS.so
zend_extension_manager.optimizer=/usr/local/Zend/lib/Optimizer-3.3.0
zend_extension_manager.optimizer_ts=/usr/local/Zend/lib/Optimizer_TS-3.3.0
zend_optimizer.version=3.3.0
zend_extension=/usr/local/Zend/lib/ZendExtensionManager.so
zend_extension_ts=/usr/local/Zend/lib/ZendExtensionManager_TS.so
PHP Accelerator For Windows Server
Feb 21, 2008Does anyone have any recommendations for a PHP Accelerator for a Windows 2003 / IIS6 / PHP 5.2 WebServer? Would the performance difference be significant? Any help would be appreciated...
View 0 Replies View RelatedStop Downloading With (downlo Accelerator) Softwares
Jan 5, 2008how can i stop downloading from my server with any accelerator programmes? because when anyone use these programmes the programme make more than 8 connection for 1 person and that make a very very load to my server
View 9 Replies View RelatedLn And PHP SuEXEC Bug
Apr 23, 2009Do you have any idea for patch PHP suEXEC with "ln" command?
View 9 Replies View RelatedAbout Suexec
Mar 23, 2008what fellow users here set --with-suexec-docroot in Apache
installations when cgi-bin folder is outside the public_html folder.
Looks like setting it to /home is the only way.
Litespeed Suexec
Jun 17, 2009I installed lsws without apache conf file(httpd.conf). Then I created a new virtual host in "suEXEC" Template. I added a new user via SSH and made home dir for him and chowned his home dir + all his files to hisusername:hisusername. His home dir(/home/user/) is chmoded to 755 and his /public_html to 711. It worked fine but after that I installed phpbb3 forum and when I tried to chmod config.php to 600 I got an error on the forum:
Fatal error: require() [function.require]: Failed opening required './config.php' (include_path='.:/usr/local/lib/php') in /home/username/public_html/common.php on line 127
When I was using lsws with apache conf file and I had configured suEXEC + suPHP for apache I was able to chmod config file to 600 and it worked fine. I have no idea what could be the problem now.
It works fine when I chmod config.php to 755 but for security reasons I would need a way to configure it to 600.
LiteSpeed si running as nobody:nobody.
EX. APP settings:
LSAPI App
$VH_NAME_lsphp
uds://tmp/lshttpd/$VH_NAME_lsphp.sock
SCRIPT HANDLER settings:
Suffix: php5
Type: LiteSpeed API
Name: [VHost Level]: $VH_NAME_lsphp
Suexec And Suphp?
Feb 8, 2008what are suexec / suphp and for what purpose we use it.
View 1 Replies View RelatedConfigure Suexec And PHP
Mar 15, 2008I have a problem in the last apache upgrade (apache 2.2.8 + php5) step .
exactly in "Configure Suexec and PHP"
I found this option doesn't have multi values as CGI or Suphp just I found none :
PHP 5 Handler none
PHP 4 Handler none
I must to return to build apache1 with php4 for I can see suphp and cgi in "Configure Suexec and PHP" "PHP 4 Handler" option .
Setting Up Php/SuExec
Jan 2, 2007(what I did find was for old apache, not 2.2)
I have Fedora Core 5 wih Apache 2.2.2 and VirtualHosts setup, currently running mod_php and mod_suexec. I would like to switch to use php with suexec because I need to edit files with php that "nobody" doesn't have access to (777 not an option).
Right now mod_suexec works great with Perl, but not PHP. So I ask, how can I get them to play nice?
PHPSuExec Vs SuExec
Sep 21, 2007Can anyone tell me the difference between SuExec and PHPSuExec. I hear eaccelerator will not work with PHPSuExec but will it work with SuExec?
View 2 Replies View RelatedPhpsuexec And Suexec
Oct 28, 2007what is phpsuexec and suexec and how to stop them ?
View 1 Replies View RelatedHowto For Suexec, Php As Cgi
Aug 28, 2007I've been attempting to develope a server running apache 2+, php 5, and I was running into issues installing php as cgi.... All my scripts require The shebang:
#!/usr/bin/php at the top to execute properly. Anyone know a good site/how to that explains how to do this?
has anyone else here run suexec with apache? If so, could you tell me what you compiled it with? Just curious, as I think i'm doing everything right, yet I still fail
Suexec And CPanel
Jul 23, 2007Can I have Apache suexec with cPanel?
View 5 Replies View RelatedSuExec Effect?
Sep 26, 2007I want to ask about suexec.
Currently I disable suexec in my dedicated server.
Which is better, to enable it or not?
What will happen to existing sites folder permissions if suexec is turned on?
Register_globals With Suphp And SuEXEC
Mar 29, 2009my server is centos and cpanel,
i setup it with suphp and suEXEC,
and i set the register_globals as off on server,
now,i had a website need register_globals on,
i search many articles and try to edit php.ini and .htaccess,
but all still show
FATAL ERROR: register_globals is disabled in php.ini, please enable it!
or
500 internal error
could anyone teach me how to solve the issue?
Suexec Enable Or Disable
Mar 25, 2009is it good or not and why we should enable or disable it in cpanel server or other server?
View 11 Replies View RelatedFastCGI- (apache 2.2, Php 5.1, Suexec)
Dec 17, 2008I have just switched from mod_php to fastcgi + suexec, but now trying to use the ab command times out :
ab -n 10000 -c 100 [url]
This is ApacheBench, Version 2.0.40-dev <$Revision: 1.146 $> apache-2.0
Copyright 1996 Adam Twiss, Zeus Technology Ltd, [url]
Copyright 2006 The Apache Software Foundation, [url]
Benchmarking www.example.com (be patient)
Completed 1000 requests
Completed 2000 requests
Completed 3000 requests
Completed 4000 requests
Completed 5000 requests
Completed 6000 requests
Completed 7000 requests
apr_poll: The timeout specified has expired (70007)
Total of 7422 requests completed
Then I get a bunch of emails from LFD ....
Apache 2.2 + Suexec + Mod_fastcgi
Jan 3, 2007First uninstall your existing PHP.
Install httpd-devel
Second compile a new PHP with support of cgi/fcgi:
Code:
./configure --prefix=/usr/local/php-fcgi --enable-fastcgi --enable-memory-limit --with-mysql=shared,/usr --enable-discard-path --enable-force-cgi-redirect --with-imap=shared,/usr --with-gd=shared,/usr --with-libxml=shared,/usr --with-mbstring=shared --with-freetype-dir=/usr --with-jpeg-dir=/usr --with-png-dir=/usr --with-zlib-dir=/usr --with-kerberos --with-imap-ssl
make
make install
To solve the errors during configure problems take a look at this:
[url]
Next you'll need to download/install fcgid:
Code:
wget http://www.fastcgi.com/dist/fcgi-2.4.1-SNAP-0311112127.tar.gz
tar xfvz fcgi-2.4.1-SNAP-0311112127.tar.gz
cd fcgi-2.4.1-SNAP-0311112127
./configure
make
make install
Next you'll need to compile/install mod_fastcgi for Apache 2.2.2:
Code:
wget [url]
tar xfvz mod_fastcgi-SNAP-0404142202.tar.gz
cd fcgi-2.4.1-SNAP-0311112127
Now we need to apply a patch so mod_fastcgi compiles with Apache 2.2. Put the following into a file:
Code:
diff -ruN mod_fastcgi-2.4.2/Makefile.AP2 mod_fastcgi-2.4.2.for22/Makefile.AP2
--- mod_fastcgi-2.4.2/Makefile.AP2Mon Jul 29 03:36:34 2002
+++ mod_fastcgi-2.4.2.for22/Makefile.AP2Mon Dec 5 13:05:21 2005
@@ -20,8 +20,6 @@
all: local-shared-build
-install: install-modules
-
clean:
-rm -f *.o *.lo *.slo *.la
diff -ruN mod_fastcgi-2.4.2/fcgi_buf.c mod_fastcgi-2.4.2.for22/fcgi_buf.c
--- mod_fastcgi-2.4.2/fcgi_buf.cTue Feb 4 00:07:37 2003
+++ mod_fastcgi-2.4.2.for22/fcgi_buf.cMon Dec 5 12:59:01 2005
@@ -50,7 +50,7 @@
{
Buffer *buf;
- buf = (Buffer *)ap_pcalloc(p, sizeof(Buffer) + size);
+ buf = (Buffer *)apr_pcalloc(p, sizeof(Buffer) + size);
buf->size = size;
fcgi_buf_reset(buf);
return buf;
@@ -487,7 +487,7 @@
char *new_elts;
int new_nalloc = (arr->nalloc <0>nelts + n;
- new_elts = ap_pcalloc(arr->pool, arr->elt_size * new_nalloc);
+ new_elts = apr_pcalloc(arr->pool, arr->elt_size * new_nalloc);
memcpy(new_elts, arr->elts, arr->nelts * arr->elt_size);
arr->elts = new_elts;
diff -ruN mod_fastcgi-2.4.2/fcgi_config.c mod_fastcgi-2.4.2.for22/fcgi_config.c
--- mod_fastcgi-2.4.2/fcgi_config.cThu Oct 30 02:08:34 2003
+++ mod_fastcgi-2.4.2.for22/fcgi_config.cMon Dec 5 12:59:01 2005
@@ -50,7 +50,7 @@
/* Convert port number */
tmp = (u_short) strtol(portStr, &cvptr, 10);
if (*cvptr != '' || tmp <1> USHRT_MAX)
- return ap_pstrcat(p, "bad port number "", portStr, """, NULL);
+ return apr_pstrcat(p, "bad port number "", portStr, """, NULL);
*port = (unsigned short) tmp;
@@ -75,11 +75,11 @@
tmp = strtol(txt, &ptr, 10);
if (*ptr != '') {
- return ap_pstrcat(p, """, txt, "" must be a positive integer", NULL);
+ return apr_pstrcat(p, """, txt, "" must be a positive integer", NULL);
}
if (tmp <min> USHRT_MAX) {
- return ap_psprintf(p, ""%u" must be >= %u and <u>= %u and <u cp=''>= %d", *num, min);
+ return apr_psprintf(p, ""%d" must be >= %d", *num, min);
}
return NULL;
@@ -126,9 +126,9 @@
*num = (u_int)strtol(val, &ptr, 10);
if (*ptr != '')
- return ap_pstrcat(p, """, val, "" must be a positive integer", NULL);
+ return apr_pstrcat(p, """, val, "" must be a positive integer", NULL);
else if (*num < min)
- return ap_psprintf(p, ""%u" must be >= %u", *num, min);
+ return apr_psprintf(p, ""%u" must be >= %u", *num, min);
return NULL;
}
@@ -147,9 +147,9 @@
*num = (float) strtod(val, &ptr);
if (*ptr != '')
- return ap_pstrcat(p, """, val, "" is not a floating point number", NULL);
+ return apr_pstrcat(p, """, val, "" is not a floating point number", NULL);
if (*num <min> max)
- return ap_psprintf(p, ""%f" is not between %f and %f", *num, min, max);
+ return apr_psprintf(p, ""%f" is not between %f and %f", *num, min, max);
return NULL;
Remove Php Suexec Support
Apr 29, 2007when i remove php suexec support, while i entering sites it save php files. how can solve this problem
Server info;
WHM 10.8.0 cPanel 10.9.0-R10737
CentOS 4.4 x86_64 - WHM X v3.1.0
Alias To A Php Script (php Suexec Installed)
Aug 13, 2007i install roundcube webmail (php)
i want to add an alias like /mail for all domain to /usr/src/roundcube
i add this command in httpd.conf:
Quote:
Alias /mail /usr/src/webmail
but because suphp installed , apache run it under root user (or user assigned to it) and suphp produce "500 Internal server Error"
PAM Authentication Failure With FTP And Apache Suexec
Jun 18, 2007i am trying to setup a VPS with:
Apache Suexec, so that each VHosts runs under there own username
FTP for each of the vhosts.
I have made a username aplushost and FTP works fine when i login, however when i try and get Suexec to work it shows a 403 permision dined, even know the whole directroy path is with correct permsions.
"/home/aplushost/www"
However if i chown the directroy "aplushost" to apaches username , currently "nobody" i have tried with "apache" and many others the page is displayed correctly.
The weird thing is that the www directroy can still be set to the aplushost username and files work inside.
However due to changing the privalages of the folder aplushost ftp now fails to login due to the folder not being owned by the ftp user "aplushost".
So im stuck between only having one item working at a time.
i have put some content of my config files.
----------httpd.conf vhosts------------------
<VirtualHost 87.117.196.247>
DocumentRoot "/home/aplushost/www"
ServerName aplushost.co.uk
SuexecUserGroup aplushost aplushost
<Directory "/home/aplushost/www">
allow from all
Options +Indexes
</Directory>
</VirtualHost>
---------------passwd file----------------
aplushost:x:500:99::/home/aplushost/www:/sbin/nologin
(Have tried with many different shells, no difference, also tried with home directroy as just /home/aplushost)
Blank Php Pages- Mod_cgi- Suexec? W00t
Jul 25, 2007I am having trouble with blank pages on some web applications; ccHost and phpBB3.
I can get these to run on a seperate VPS, that isn't as securely locked down and the dedi --- but it is of course the dedi I want to run these apps from.
I simply get blank pages when trying to access ccHost. As if PHP isn't parsing it. But in a phpBB3 installation I'm getting random blanks, some of which I can refresh out of ... What's even weirder: sometimes when I try to viewtopic - or call some function ... I get the download dialogue!? (Do you want to open or download index.php for instance).
I've been trying loads of stuff. It seems that mod_security isn't running anymore, so that isn't the issue. Could mod_cgi or mod_suexec perhaps be the cheeky offenders? I have absolutely no idea.
Just hoping someone can help me where to look... Or how I can debug this issue. I'm at a loss in how to continue. Any help will be very appreciated.
Some details... The server is hardened and secured, but...
I'm running other CMS installs on the server, and they are working fine. Even a phpBB2 install is running smooth. Besides this I'm using LAMP setup on CentOS and webmin is running.
Disable/Bypass Suexec Per Vhost Domain
Oct 12, 2007I am running on;
Plesk versionpsa v8.0.1_build80060613.20 os_CentOS 4.2
Operating systemLinux 2.6.9-023stab033.6-smp
License key numberPLSK.00170782.0006
I need to be able to access cgi between vhost domains. In particular one frequently updated file located 'centrally' in the cgi-bin of one of the vhost domain.
I would like to be able to have other vhost domains be able to access this file but suexec won't let that happen. I have searched around and tried to following;
Created vhost.conf file in the conf directory of one of the domains.
The vhost.conf file contained (with no #):
# <IfModule mod_suexec.c>
# SuexecUserGroup userid psacln
# </IfModule>
I ran;
/usr/local/psa/admin/bin/websrvmng -u --vhost-name=<domain name>
Then reboot.
The result was all the vhosts stopped working. I reset the websvrmng, things returned to normal.
Then I tried updating the httpd.include file adding (with no #);
# <IfModule mod_suexec.c>
# SuexecUserGroup userid psacln
# </IfModule>
Then reboot.
The result was the same, all vhosts stopped working.
Does anyone have an idea how I can achieve this? I know I can disable suexec all together but that wreaked a little havoc with the cgi app when I tried that.
Determining Process Intense Tasks With Suexec Installed
Jan 19, 2008i got mod suexec / phpsuexec installed on the server recently. if i click on view cpu/memory/mysql usage in WHM i can see this in the first row:
<username><domain>3.170.110.1
Top Process%CPU 145/usr/bin/php
Top Process%CPU 100/usr/bin/php
Top Process%CPU 81.7/usr/bin/php
now this info is pretty useless. ok, php is evidently bursting to pretty damned high cpu levels. BUT, what are the actual FILES causing this load?
Plesk 12.x / Linux :: PHP As FastCGI Doesn't Work With Suexec
Jul 2, 2014We have updated our Plesk 10.4.4 to 12.0.18. We want to use PHP with FastCGI (Apache) and get always the following suexec - error:
command cgi_wrapper not in docroot (10004)
We use CentOS 6.4
Using Vhost.conf To Override Suexec Directive In Httpd.include
Oct 20, 2009I need to change the server configuration on Plesk such that the SuexecUserGroup directive is removed, so the user's cgi scripts run as the apache user (www-data), rather than as the user specified in that directive (the domain user), as on an unshared (non-VPS) server. I don't care about security from other domains because only one domain runs on it anyway, so making the user domain-specific is irrelevant from a security point of view and stops some of the user's code working.
This directive is found in
/var/www/vhosts/domainname.com/conf/httpd.include
and is:
SuexecUserGroup user psacln
(this line appears twice, for ports 443 and 80)
I understand that this file can't be modified, as it may be overwritten by Plesk. Therefore additional directives must go in the vhost.conf file.
Will the following vhost.conf file do the trick and override the directives in httpd.include?
<VirtualHost domainIP:443>
SuexecUserGroup www-data www-data
</VirtualHost>
<VirtualHost domainIP:80>
SuexecUserGroup www-data www-data
</VirtualHost>
Apache :: Warning - SuexecUserGroup Directive Requires SUEXEC Wrapper
Nov 27, 2013Why this error might have started to appear? I am fairly new to apache and was trying to harden it up.
I am use CentOS:
Server version: Apache/2.2.25 (Unix)
Server built: Oct 7 2013 17:21:18
Cpanel::Easy::Apache v3.22.14 rev9999
I was trying to add a group to control access to specific groups to enforce some security:
chown -R root:root /usr/local/apache/bin
chmod -R 770 /usr/local/apache/bin
chown -R root:root /usr/local/apache/conf
chmod -R 770 /usr/local/apache/conf
groupadd apacheadmin
groupadd apache
useradd -d /usr/local/apache/htdocs -g apache -s /bin/false apache
I think this is a permission issue.