Is It Possible To Get The Raw Munin Data, Or Just The Graphs
Feb 11, 2008if you can dump the actual data used to make the graphs in munin, or are the graphs the only way to view the data?
View 2 Replies
ADVERTISEMENT
Munin Graphs Are Empty
Nov 4, 2008Munin was running OK on my cPanel server until yesterday when the graphs stopped updating themselves. I attempted a "/usr/share/munin/munin-update --force-root" which did nothing. Then I uninstalled and reinstalled munin on the cPanel plugins screen and now its running but all the graphs are empty
View 3 Replies View RelatedMRT Graphs
Mar 6, 2008I have ~50 megabits of data connectivity and about ~10 servers connected to it at any given time. I want to start monitoring BW stats at the switch level for each machine. What is needed to set this up A to Z
I know i need a switch that is capable of SNMP I believe. Anyone have any recommendations on which switch to purchase ( i am looking for a 12-24 port switch) Midrange on prices on what to expect.
Once i have the switch in place from there what needs to be done in order to start producing graphs on a per server basis?
Bandwidth Graphs
Apr 23, 2007I've never setup a bandwidth monitoring system before, as we've really only used the datacenter supplied MRTG, PRTG, or RTG graphs for our cabinets until now.
I'm curious what solutions different users out there use; why you use them; and what you like/dislike about those systems.
Server Graphs For Plesk
Apr 29, 2008i'm runing a plesk server... anyone knows a good/simple way to install a graphs system for analyze server numbers?
I have found Cacti and Cricket...
I think Cacti is easier to install but it's still complicated...
I would like to see graphs of load average, memory, but ALSO httpd connections, httpd average response, mysql threads, ...
Can You Look At The Graphs Attached And Recommend Server Specs
Apr 20, 2009Can you guys recommend a server by looking at the graphs below?
Connections „ CPU Usage „ Load Average
Memory Utilization „ Swap Memory „ Traffic
I'm trying to identify the right hardware for the job without going overkill with the specs, as the budget is limited.
Should I Uninstall Munin
Jan 26, 2008I have WHM 11.15.0 cPanel 11.17.0-R19429
FEDORA 4 i686 on standard - WHM X v3.1.0
/var keeps getting filled up with munin logs. Do I really need these logs? The server already had munin when I got it so I don't know how it was installed.
Can I disable it? I looked at the cron tab, and I don't see munin, but when I did chkconfig --list I found:
munin-node 0: off 1: off 2: on 3: on 4: on 5: on 6: off (spaces added because it made smileys)
How do I disable it?
How To Disable Munin...
Feb 20, 2007How to disable from debian server autorun munin script [url] [munin, munin-update, munin-node processes]?
View 13 Replies View RelatedMunin Installation In Centos
Jun 25, 2008I tried to install cacti, somehow it didn't work out so i decided to install munin. But when i choose munin from plugins list it starts to install than it says
Starting Munin Node: [ OK ]
Can't locate RRDs.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.6/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl/5.8.6 /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 . /usr/local/cpanel/3rdparty/lib/perl) at /usr/share/munin/munin-graph line 225.
BEGIN failed--compilation aborted at /usr/share/munin/munin-graph line 225.
Install Complete (munin 1.2.4)
Done
I did some googling about the error and it is because rrdtool is not installed.
Actually i installed rrdtool 1.3.0 from its website it was in /usr/local/rrdtool
Anyway i clicked install a rpm from whm and choose rrdtool.i386
root@server # rpm -qa | grep rrd
rrdtool-1.2.23-6.fc6
But it is still giving error above when i try to install munin
Understanding Munin Output
Apr 18, 2008I use Munin to monitor the health of our servers, I can tell by looking at the graphs there's nothing to worry about, however, I'm struggling to baseline acceptable performance.what would be classed as 'normal' output for some of the more relevant munin graphs.
I've been looking at the Apache* modules and this is the output from one of our servers:
average of: 300 accesses per minute, 6 busy servers and 4.10MB a minute volume
max of: 1400 accesses per minute, 81 busy servers and 51MB a minute volume
This is a dedicated box running one site.
We have another box that is running approximately 30 sites
average of: 30 accesses per minute, 1 busy server and a 500K a minute volume
max of: 322 accesses per minute, 11 busy servers and a 4MB a minute volume.
These servers are pretty much the same spec, dual core 64Bit, 4GB of ram, two SATA disks in RAID1.
CPU/Memory/MySQL Usage - Munin @ 54%
Aug 13, 2009I'm checking my CPU/Memory/MySQL Usage and I'm seeing that something called Munin is running at 54%. That is apparently the average for today. Can anyone give me any insight as to what this is?
Wikipedia classifies Munin as a network monitoring application. I don't think it should be using this much processing.
It appears that I may have enabled this plugin when I rebuilt my apache using EasyApache. Are there any big benefits to this? Looking at the graphics at first glance it doesn't look like there is. but then again, I'm not that knowledgable about this stuff.
Munin :: 95th Percentile Calculations
Dec 5, 2008I have Munin running on my Centos 5.2 box, but would like the 95th percentile calculations. I have found this page for an add on:
[url]
where to put this code and/or how to install it?
How To Monitor Bandwidth/traffic Using Munin
Nov 21, 2007Does anyone have a tutorial or instructions to show how to set up munin to monitor bandwidth/traffic utilization?
I have a VPS from a provider that has no monitoring tools, and I need something to monitor.
(The VPS uses the HyperVM software.)
I am using the CentOS version 4.x right now, and munin is already set up and configured with a basic install.
Anyone know how to add traffic/bandwidth monitoring? (Ideally, it would monitor all active ports.. but I only really need it to monitor port 1194 for openVPN software.)
Munin Stopped Reporting Eth0 After Reboot
Apr 30, 2008I rebooted my server and now munin is not showing any eth0 traffic. All other graphs are fine. I can see there is a ton of apache accesses so there is definitely eth0 traffic. Munin logs report no errors. I restarted munin and munin-node. I even did 'yum remove munin munin-node' and reinstalled again but it still doesn't work for eth0.
View 4 Replies View RelatedHow To Interpret Munin Memory Usage Graph
Oct 5, 2007The memory usage on my server has slowly been creeping up over the last few weeks due to increased load. Here is my munin memory usage graph for the last week:
[url]
Could someone tell me what I need to be looking for or how to interpret this?
The cache and buffers have been getting really high but also has the inactive memory… so its looks as though its using memory and marking it as inactive afterwards and although graph shows I have massive memory use at first glace it also shows I have half my ram inactive and therefore available to be used.
Apachetop / Munin / Nagios - Best Way To View Apache + Other Service Activity
Nov 12, 2008On Cpanel/WHM. I have just moved from a VPS to a dedicated server. I reinstalled munin, so get some stats via that. I used to have apachetop loaded on my VPS for when I wanted a 'near realtime' streaming view of apache access.
I'm wondering what the best solution is to get a good view of apache, like what apachetop did, plus also it would be nice to have a real-time monitor of MySQL activity, HDD activity (such as I/O queues, etc. Something along the lines of the perfmon on Windows servers.
What is my best option?
Also, with Nagios, when I look at the website, it seems there are two options. Load it on a single server and then load the stats via [url]or have the Nagios 'stat collector' on one machine, and have it gathering stats from multiple machines.
If you only install it on a single dedicated server, do you really have to be on the console and connect to the Nagios stats via localhost, rather than connecting remotely?
Ideally, I would like a quick, easy to setup solution, but if it takes some configuring, I can deal with it, as long as there is some documentation. My main goal is to get the real time type monitoring, you get with window's perfmon.
TWO Data Recovery Companies Failed To Recover My Data
Sep 8, 2007I have 100+ sites on this hard drive, and one site in particular that meant the world to me.
My host sent the drive to Gillware first, but they failed saying that the file system was so severely damaged that they could not recover anything.
Then shortly after, my host sent it to DriveSavers, a very well-known company, but they also FAILED.
I'm extremely depressed because of this. Please don't post if you're going to say "make sure you do backups next time" because I've heard it 504329504395 times now, and while I do realize my mistake, saying that does NOT help me.
I am willing to spend ALOT to get my sites back. I still have hope. Are there any other companies out there BETTER than DriveSavers? Assuming that you'd still have hope even after two companies failed, where you would you go or what would you do?
How To Find The Data Transfer Data In The Server
Feb 20, 2007How can I find the data transfer rate on the server. I have done ifconfig -a , it
display the amout of data has been received and transfered. I want to see the live data transfer date. Can I able to check it?