I have tried installing GPAC on my centos which has ffmpeg installed allready
l
/usr/bin/ld: cannot find -lGL
collect2: ld returned 1 exit status
make[1]: *** [libgpac.so] Error 1
make[1]: Leaving directory `/usr/src/gpac/src'
make: *** [lib] Error 2
-bash-3.2# cat /etc/redhat-release
CentOS release 5.2 (Final)
-bash-3.2#
Anybody have successfully installed GPAC in Centos system?
View 0 Replies View RelatedTo install the GD graphics library for PHP, is recompiling the only method? And would recompiling PHP break things?
View 12 Replies View Relatedjust recently upgraded from a fully managed VPS to a Dedicated Server. Everything seemed to be going fine, until I tried installing RoR. I have RubyGems installed and all that, but whenever I try to install Rails, the following happens.
[root@server1 ~]# gem install rails --include-dependencies
Libsafe version 2.0.16
Detected an attempt to write across stack boundary.
Terminating /usr/bin/ruby-bin.
uid=0 euid=0 pid=9614
Call stack:
0x519df871 /lib/libsafe.so.2.0.16
0x519dfc5d /lib/libsafe.so.2.0.16
0x80549b8 /usr/bin/ruby-bin
0x8054a52 /usr/bin/ruby-bin
0x80556af /usr/bin/ruby-bin
0x806132f /usr/bin/ruby-bin
0x8061de6 /usr/bin/ruby-bin
0x809eb06 /usr/bin/ruby-bin
0x8055681 /usr/bin/ruby-bin
0x805de6d /usr/bin/ruby-bin
0x805ea6c /usr/bin/ruby-bin
0x805c5e6 /usr/bin/ruby-bin
0x8059c53 /usr/bin/ruby-bin
0x8064680 /usr/bin/ruby-bin
0x805de6d /usr/bin/ruby-bin
0x805ea6c /usr/bin/ruby-bin
0x805c4df /usr/bin/ruby-bin
0x805d776 /usr/bin/ruby-bin
0x805ae8a /usr/bin/ruby-bin
0x805d2ad /usr/bin/ruby-bin
0x805e66a /usr/bin/ruby-bin
0x805ea6c /usr/bin/ruby-bin
0x805c4df /usr/bin/ruby-bin
0x8062e68 /usr/bin/ruby-bin
0x805b9b2 /usr/bin/ruby-bin
0x805e66a /usr/bin/ruby-bin
0x805ea6c /usr/bin/ruby-bin
0x805c5e6 /usr/bin/ruby-bin
0x805d776 /usr/bin/ruby-bin
Overflow caused by memcpy()
Killed
Main >> Software >> Apache Update
I've read through a number of threads regarding installing GD. So sorry for yet another, but I just want to make sure that I'm doing this correctly.
As seen in the attachment below I'm presented with a few options:
Previously Saved Config (** DEFAULT **)
Basic (If your previous build has failed, please use this option)
No PHP
PHP Encryption / E-commerce
PHP Encryption and Image Manipulation
PHP Image Manipulation
PHP Security
Should I start by selecting the option "Previously Saved Config (** DEFAULT **)" and then "Start Customizing Based On Profile"?
I've walked through the steps doing the above and have a question about the last section. Viewing the Exhaustive Options List shows GD as already checked yet towards the bottom I see a checkbox with the following (second attachment below):
Quote:
Save my profile with appropriate PHP 5 options set so that it is compatible with cpphp
This option will make the following changes to your profile prior to the build:
Enables:
CurlSSL
FTP
GD
Gettext
Iconv
Imap
Mbregex
Mbstring
Mysql
Mysql of the system
PGsql
Sockets
Zlib
Should I check to save and then click "Save and Build" to get GD installed?
Some additional information: I have downloaded my default profile. (lol Let's hope I don't have to use it because I wouldn't know where to begin!)
My php.ini file shows that GD is not installed or at least not compiled (if that's the right word to use). To clarify, GD is not in the list.
I have tried yum install pgp-gd and get the following:
root@server [~]# yum install php-gd
Loading "fastestmirror" plugin
Loading mirror speeds from cached hostfile
* base: styx.biochem.wfubmc.edu
* updates: mirror.raystedman.net
* addons: dist1.800hosting.com
* extras: mirrors.easynews.com
base 100% |=========================| 1.1 kB 00:00
updates 100% |=========================| 951 B 00:00
addons 100% |=========================| 951 B 00:00
extras 100% |=========================| 1.1 kB 00:00
Excluding Packages in global exclude list
Finished
Setting up Install Process
Parsing package install arguments
No package php-gd available.
Nothing to do
root@server [~]# No package php-gd available.
root@server [~]# rpm -q php-gd
package php-gd is not installed
root@server [~]# php -m
[PHP Modules]
bcmath
calendar
ctype
date
dom
eAccelerator
filter
ftp
hash
iconv
imap
json
libxml
memcache
mysql
pcre
posix
Reflection
session
SimpleXML
sockets
SPL
SQLite
standard
tokenizer
xml
xmlreader
xmlwriter
zlib
[Zend Modules]
eAccelerator
root@server [~]# yum list | grep -i gd
gd.i386 2.0.33-9.4.el5_1.1 installed
gd-devel.i386 2.0.33-9.4.el5_1.1 installed
gd-progs.i386 2.0.33-9.4.el5_1.1 installed
gdb.i386 6.5-37.el5_2.2 installed
gdbm.i386 1.8.0-26.2.1 installed
gdbm-devel.i386 1.8.0-26.2.1 installed
sysklogd.i386 1.4.1-44.el5 installed
aspell-gd.i386 50:0.50-4.2.2 base
gdk-pixbuf.i386 1:0.22.0-25.el5 base
gdk-pixbuf-devel.i386 1:0.22.0-25.el5 base
gdm.i386 1:2.16.0-46.el5.centos base
libgdiplus.i386 1.2.5-1.el5.centos extras
libgdiplus-devel.i386 1.2.5-1.el5.centos extras
root@server [~]#
to install VPN on my dedicated server with fedora core 6.
I search on the internet and I found some article.
now I have this question,
I found the rpm in WHM>Software>Install a RPM named openvpn.i386 .
Can I install this rpm from this section?
my server running freebsd 6.2
i want to installing PHP 5 so my server can run 2 version of PHP (4 and 5)
im following the step here [url]
installing was successful
[root@s1 /usr/local/apache/logs]# /usr/local/cpanel/cgi-sys/php5 -v
PHP 5.2.1 (cgi) (built: Mar 30 2007 17:07:11)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
but when i try to running phpinfo for it, its show me an error
i grep the error from error.log and got this
[Fri Mar 30 17:42:47 2007] [error] [client 202.65.236.10] Premature end of script headers: /home/uletbulu/public_html/info.php
[Fri Mar 30 17:42:47 2007] [error] [client 202.65.236.10] File does not exist: /home/uletbulu/public_html/500.shtml
[Fri Mar 30 17:44:07 2007] [error] [client 202.65.236.10] Premature end of script headers: /usr/local/cpanel/cgi-sys/php5
[Fri Mar 30 17:44:07 2007] [error] [client 202.65.236.10] File does not exist: /home/uletbulu/public_html/500.shtml
but for php 4 there is no problem at all
or the syntax for php 5 not using phpinfo(); anymore?
[url]
[url]
I've installed PHP, MySQL and Apache on my XP.
I've uncommented some extensions in php.ini and among them:
extension=php_pdf.dll and extension=php_mysqli.dll, but when I start Apache I got the message:
PHP Startup: Unable to load dynamic library 'c:phpextphp_mysqli.dll' - The specified module could not be found
But I have that module in c:phpextphp_mysqli.dll.
Anyone have tried yum with suse 10.x ? and what its rpm download link?
View 1 Replies View RelatedIve just installed PHP on my virtual server and am getting this error message:
PHP Warning: PHP Startup: (null): Unable to initialize module
Module compiled with module API=20041030, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: (null): Unable to initialize module
Module compiled with module API=20041030, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/dom.so' - /usr/lib/php/modules/dom.so: undefined symbol: empty_string in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/gd.so' - /usr/lib/php/modules/gd.so: undefined symbol: empty_string in Unknown on line 0
PHP Warning: PHP Startup: ?Mq?gpp?: Unable to initialize module
Module compiled with module API=20041030, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mbstring.so' - /usr/lib/php/modules/mbstring.so: undefined symbol: empty_string in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mysql.so' - /usr/lib/php/modules/mysql.so: undefined symbol: empty_string in Unknown on line 0
PHP Warning: PHP Startup: D1q?`?p?: Unable to initialize module
Module compiled with module API=20041030, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/xsl.so' - /usr/lib/php/modules/xsl.so: undefined symbol: dom_node_class_entry in Unknown on line 0
Does anyone have any ideas what this could be/how it could be fixed? Full phpinfo can be found here: jlwalsh.net/phpinfo.php - if theres any other info I can send let me know.
Trying to install gd library but not able to..
When i do yum install php-gd it says nothing to do..
Kindly help me.. Its a week i am trying to make it work.. Looks like i have searched the whole net..
I have Kevin Yank's book, and have followed the instructions (I thought) absolutely correctly.
most of it seems to be fine, but when I open up the very first page created (the "today.php" project!).. it says "module not found"..
take out the <%php bit... and rename it as an asp file (just to be sure my /localhost settings etc were ok) and it works fine. It's clearly a php install error.. Where do I start looking?
I did search on the forum but failed to find any related thread...
Hi there, I was wondering if anyone have installed ffmpeg-php under windows successfully or you might understand how to do it?
By default it's for linux, but there is a version for win made by some guy/guys to be found here: ffmpeg google groups
Problem is, I don't understand how to install? Could anyone explain, thanks!
Edit: Got it to work!
avcodec.dll (copy to WindowsSystem32)
avformat.dll (copy to WindowsSystem32)
php_ffmpeg.dll (php dir)
Add: extension=php_ffmpeg.dll <- to php.ini
All the other files confused me
We have a managed VPS, and have never needed on our own dedicated servers in teh past to have FFMPEG due to the line of data we host. So, I asked our provider to please install FFMPEG onto our server.
This is the response I have received:
FFMpeg requires PHP to be compiled as CGI (PHPsuexec) that is only officially supported by cPanel. So in order to install FFMpeg modules we have to resetup your VPS with cPanel.
Now our VPS is running Direct Admin on CentOS.
I am not trying to poke holes at our provider, just trying to find out if this is the truth, or if there is a work around that can accomplish this.
I do not want CPANEL on our account. We have two unix techs here at work, however unfortunately they are both off for two weeks as of middle of last week, so i'm caught with who to look for to gain a second opinion.
I have installed a Apache server version 1.3.33 on windows XP and would like to enable mod_rewrite so i can rewrite my ugly url´s. How do I install this great feature in Apache so i can test it locally?
Do i just remove # from
#LoadModule rewrite_module modules/mod_rewrite.so
#AddModule mod_rewrite.c
Are there any circumventors you can install on your website to bypass censorship on public computers?
View 0 Replies View RelatedHow does one install imagemagick?
I have read instructions on imagemagicks site, but don't see how I can upload files, and how to execute the commands that instuctions say to do.
I had to reload my VPS cause I got hit with the LX admin exploit (Shocked cause the copy was over a year old)
But I'm not really server savvy, could someone possibly teach me the following.
How to install
apache
ftp
mysql
php
and how to secure the vps so it doesn't get hacked? Also is there any other free control panel to use? I'm really bad in shell, I can do basic stuff and if it's written in plain site I can easily do it. I've seen people here post these two,
ispCP
sysCP
Both look pretty nice, which one would be better do you think?
So if anyone could help me out with this that would be very nice and awesome of you. If I posted in the wrong thread mods please move it.
(I read the secure the VPS thread here already but my IP changes alot, the last 2 sets of numbers change daily)
I am new with VPS, i was trying to install LXA on my new VPS after rebuilding it
This is what i typed in SSH
wget [url]
sh kloxo-install-master.sh
It worked out fine initially. It went on installing, updating, downloading and so on..
But finally got stuck at this point
11:02:43 (379 KB/s) - `lxawstats4400.tar.gz' saved [1143518/1143518]
Downloading Installappdata
error reading information on service gpm: No such file or directory
rm -rf /var/lib/mysql
I am currently using CentOS 5. I installed php-mysql, mysql-server, mysql and mysql-devl through yum install.
WhenI try to start mysqld I get this error
Code:
090722 20:17:32 mysqld started
090722 20:17:32 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
InnoDB: Reading tablespace information from the .ibd files...
InnoDB: Restoring possible half-written data pages from the doublewrite
InnoDB: buffer...
090722 20:17:32 InnoDB: Starting log scan based on checkpoint at
InnoDB: log sequence number 0 36808.
InnoDB: Doing recovery: scanned up to log sequence number 0 43655
090722 20:17:32 InnoDB: Starting an apply batch of log records to the database...
InnoDB: Progress in percents: 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99
InnoDB: Apply batch completed
InnoDB: Error: pthread_create returned 12
090722 20:17:33 mysqld ended
I obviously havn't done something correctly.
I've got a customer who would like to have TomCat installed in his hosting account.
I've some question before doing it, it kindda scares me..
1- I have apache 1.3.
2- I don't want every child process of apache to have an additional 15MB..
3- I don't know a lot about Java... Is it as easy as «port install» it in my FreeBSD?
Basically, I would really like to accomodate that customer but I also doesnt want to mess everything for a single customer.
I am installing dotnetpanel first time on vps.After installing the dotnetpanel Enterprise server when I check by 127.0.0.1:9002 it gives "service unavailable" error.
View 14 Replies View RelatedI successfully installed eAccelerator and its already working fine then I decided to update my PHP version which is 5.1.6 to 5.2.6 after the upgrade eAccelerator is no longer loaded I tried recompiling eAccelerator but to no avail it doesnt load anymore I double checked eaccelerator.ini and it was already set. Someone said that the phpize that was installed in my server is not compatible to PHP5.2.6 and it needs to be updated also but I cant seem to update it since it always says that it is already updated.
I am using CentOS5.3.
I am trying to install APC on my server and getting the following error:
Quote:
[root@ic ~]# pecl install apc
downloading APC-3.0.18.tgz ...
Starting to download APC-3.0.18.tgz (115,957 bytes)
.........................done: 115,957 bytes
47 source files, building
running: phpize
Configuring for:
PHP Api Version: 20041225
Zend Module Api No: 20060613
Zend Extension Api No: 220060519
ERROR: `phpize' failed
Why am I getting that error?
FYI, if this might help:
Php version:
Quote:
PHP 5.2.5 (cli) (built: Dec 12 2007 11:48:35)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
MySQL version:
Quote:
mysql Ver 14.12 Distrib 5.0.24a, for redhat-linux-gnu (i686) using readline 5.0
I am running CentOS 4.4-32
I recently installed ubuntu 7.10, and apache2. Both installed with no problems. In my browser i am able to type localhost, and i recieve the "It works" page. I can also start,stop and restart with no problems. However, I cannot install php5. I use synaptic package manager to install, and i added the appropriate lines to the httpd.conf file but i still cannot view .php files. I try to run a simple php page and a dialog box pops up prompting me to open or save the file. If i choose either, the box just pops up again.
View 15 Replies View RelatedI've got some problems with qmailtoaster in an openvz vps and centos 5.2.
At the "perl step" (wiki.qmailtoaster.com/index.php?title=CentOS_5_QmailToaster_Install) I get a lot of errors about dependency that cpan tries to resolve but it fail.
Here it is the last part when it basically quit...
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
Running make for P/PM/PMQS/Compress-Zlib-2.011.tar.gz
Is already unwrapped into directory /root/.cpan/build/Compress-Zlib-2.011
CPAN.pm: Going to build P/PM/PMQS/Compress-Zlib-2.011.tar.gz
-- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
Running make for T/TO/TOMHUGHES/IO-Zlib-1.09.tar.gz
Is already unwrapped into directory /root/.cpan/build/IO-Zlib-1.09
CPAN.pm: Going to build T/TO/TOMHUGHES/IO-Zlib-1.09.tar.gz
-- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
Running make for K/KA/KANE/Archive-Tar-1.38.tar.gz
Is already unwrapped into directory /root/.cpan/build/Archive-Tar-1.38
CPAN.pm: Going to build K/KA/KANE/Archive-Tar-1.38.tar.gz
-- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
#
my /proc/user_beancounters
Version: 2.5
uid resource held maxheld barrier limit failcnt
988540: kmemsize 2321344 3576802 2147483646 2147483646 0
lockedpages 0 348 350 350 7
privvmpages 34453 73032 131072 131072 0
shmpages 687 703 65536 65536 0
dummy 0 0 0 0 0
numproc 27 38 350 350 0
physpages 7203 26499 0 2147483647 0
vmguarpages 0 0 65536 2147483647 0
oomguarpages 7203 26499 65536 2147483647 0
numtcpsock 5 8 2800 2800 0
numflock 4 11 350 350 0
numpty 1 1 175 175 0
numsiginfo 0 3 350 350 0
tcpsndbuf 123248 123248 53687296 65156096 0
tcprcvbuf 81920 801552 53687296 65156096 0
othersockbuf 9280 22512 53687296 65156096 0
dgramrcvbuf 0 8464 53687296 65156096 0
numothersock 8 18 2800 2800 0
dcachesize 0 0 3225600 3225600 0
numfile 652 905 8400 8400 0
dummy 0 0 0 0 0
dummy 0 0 0 0 0
dummy 0 0 0 0 0
numiptent 14 14 350 350 0
I've already tried to reset the cpan configuration and to use the cpan shell directly but I still have the same problems.
login as: root
root@20*.17*.3**.1**'s password:
Last login: Fri Feb 22 15:21:26 2008 from 20*.5*.4*.2*
[root@vian ~]# yum install php-gd
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
extras 100% |=========================| 1.1 kB 00:00
updates 100% |=========================| 951 B 00:00
base 100% |=========================| 1.1 kB 00:00
addons 100% |=========================| 951 B 00:00
Reading repository metadata in from local files
Excluding Packages in global exclude list
Finished
Parsing package install arguments
Nothing to do
[root@vian ~]#
Does that mean I have installed GD? I am new to this dedi thingy.
I wanted to install PHP RAR extension:
to compress & decompress rar files. I installed it on the server & added the extension=rar.so to php.ini files.
But still, when I run a rar function like rar_open(), I get an error :
Fatal error: Call to undefined function rar_open()
I tried installing the extension again through SSH, but it says "Nothing to Install".
I'm testing out the old version of CentOS which is CentOS 2.1 on Virtual PC and I'm running into some problems. After installation of CentOS, it asks me to reboot the system so then I reboot it. Then it prompts me for the login and password.
I type in "root" and my password. Then I'm stuck inside this command prompt that says:
[root@localhost root]#
Now, how exactly do I get into CentOS graphical user interface, or is this it?
I tried installing Apache 2.2.8 in my new BOX,
After downloading source file and extracting it in folder,
i performed this steps
1) $ ./configure --prefix=/usr/local/apache
2) $ make
3) $ make install
4) $ PREFIX/bin/apachectl start
On the first step itself , i am getting this error -
checking for chosen layout... Apache
checking for working mkdir -p... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
Configuring Apache Portable Runtime library ...
checking for APR... reconfig
configuring package in srclib/apr now
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
Configuring APR library
Platform: x86_64-unknown-linux-gnu
checking for working mkdir -p... yes
APR Version: 1.2.12
checking for chosen layout... apr
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
configure failed for srclib/apr
Here is contents of config.log
Code:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.60. Invocation command line was
$ ./configure --prefix=/usr/local/apache
## --------- ##
## Platform. ##
## --------- ##
uname -m = x86_64
uname -r = 2.6.9-55.EL
uname -s = Linux
uname -v = #1 Wed May 2 13:52:08 EDT 2007
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/kerberos/sbin
PATH: /usr/kerberos/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /sbin
PATH: /bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /usr/X11R6/bin
PATH: /root/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2266: checking for chosen layout
configure:2268: result: Apache
configure:3073: checking for working mkdir -p
configure:3089: result: yes
configure:3106: checking build system type
configure:3124: result: x86_64-unknown-linux-gnu
configure:3146: checking host system type
configure:3161: result: x86_64-unknown-linux-gnu
configure:3183: checking target system type
configure:3198: result: x86_64-unknown-linux-gnu
configure:3270: checking for APR
configure:3352: result: reconfig
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=x86_64-unknown-linux-gnu
ac_cv_mkdir_p=yes
ac_cv_target=x86_64-unknown-linux-gnu
## ----------------- ##
## Output variables. ##
## ----------------- ##
APACHECTL_ULIMIT=''
APR_BINDIR=''
APR_CONFIG=''
APR_INCLUDEDIR=''
APR_VERSION=''
APU_BINDIR=''
APU_CONFIG=''
APU_INCLUDEDIR=''
APU_VERSION=''
AP_BUILD_SRCLIB_DIRS=''
AP_CLEAN_SRCLIB_DIRS=''
AP_LIBS=''
AWK=''
BUILTIN_LIBS=''
CC=''
CFLAGS=''
CORE_IMPLIB=''
CORE_IMPLIB_FILE=''
CPP=''
CPPFLAGS=''
CXX=''
CXXFLAGS=''
DEFS=''
DSO_MODULES=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
EXTRA_CFLAGS=''
EXTRA_CPPFLAGS=''
EXTRA_CXXFLAGS=''
EXTRA_INCLUDES=''
EXTRA_LDFLAGS=''
EXTRA_LIBS=''
GREP=''
HTTPD_LDFLAGS=''
HTTPD_VERSION=''
INCLUDES=''
INSTALL=''
INSTALL_DSO=''
INSTALL_PROG_FLAGS=''
LDFLAGS=''
LIBOBJS=''
LIBS=''
LIBTOOL=''
LN_S=''
LTCFLAGS=''
LTFLAGS=''
LTLIBOBJS=''
LT_LDFLAGS=''
LYNX_PATH=''
MKDEP=''
MKINSTALLDIRS=''
MK_IMPLIB=''
MODULE_CLEANDIRS=''
MODULE_DIRS=''
MOD_ACTIONS_LDADD=''
MOD_ALIAS_LDADD=''
MOD_ASIS_LDADD=''
MOD_AUTHNZ_LDAP_LDADD=''
MOD_AUTHN_ALIAS_LDADD=''
MOD_AUTHN_ANON_LDADD=''
MOD_AUTHN_DBD_LDADD=''
MOD_AUTHN_DBM_LDADD=''
MOD_AUTHN_DEFAULT_LDADD=''
MOD_AUTHN_FILE_LDADD=''
MOD_AUTHZ_DBM_LDADD=''
MOD_AUTHZ_DEFAULT_LDADD=''
MOD_AUTHZ_GROUPFILE_LDADD=''
MOD_AUTHZ_HOST_LDADD=''
i have search this forum and google.but none of them can help me to instal it.
i have centos with direct admin.
first i login via ssh to my server
~
then i wget the latest ver an untar it in ~ and go to /modsecurity-apache_2.5.7 folder and then apache2/
and run:
./configure
make
make install
and config httpd.conf
thats it.
is it right or not and how can i test it that is it work fine or not
