Due to high IO load server is going crash once a day.
I have optimized the MySQL, Upgraded the kernel but still it's same. The SWAP seems normal.
Now probably it is due to high traffic of http or emails. How should I diagnose and fix it? I am in big trouble.
Its PIV 3.0, 1GB Ram and 450 Websites
I've been having trouble with my VPS for a while now. In the QoS alerts page in Virtuozzo it seems to be a problem with numtcpsock and tcprcvbuf, mainly numtcpsock.
Copy these into the browser:
i18.photobucket.com/albums/b106/gnatfish/qosnumtcpsock2.jpg
And when i run cat /proc/user_beancounters:
i18.photobucket.com/albums/b106/gnatfish/beancounters2.jpg
This line is particularly scary:
numtcpsock 164 164 166 166 7321
What do i need to do, to get the website running again? It's only one site on the vps a proxy. So i thought a vps would be able to handle one proxy.
Anyone know of some good server load testers ( commercial )?
Im not looking for application based load testing, I need real web server load testing... need to see how much traffic this one site can take before it cries.
I'm having the oddest issue. For some reason, some of the websites on my server load fine, and some take a really long time to load (2 minutes).
Now, the server load is fine, and the size of the sites aren't the issue either. I've restarted Apache and a couple more services, and still the same sites seem to load very slow.
What could be causing this since it's only effecting certain websites?
I would like to know how to check load via ssh and check files causing load?
I want the ssh codes for 2 different set of control panels, one with cpanel+whm and other with kloxo+hypervm
and I would also know how to check the files causing the load, such as some files could have been interrupted while processing, so they could be causing load some times, so I want to stop such processes if any are running on the vps on my friends accounts
I just got a futurehosting VPS recently and something is puzzling me. Is it normal that an idle CPanel virtuozzo VPS that has no sites on it should display "top" loads of between 1 and 4 regularly? I've been watching the load for a bit now and it keeps jumping between 0-4. When it goes 1 or above, the WHM panel becomes really slow, timing out... They seem to use a beast 8 core machine, so it would take some activity to cause even a 1 load..
I do not have much knowledge about VPS hosting, on a dedicated I would expect the loads to stay 0-0.2 at this point... Is the 1-4 load showing the result of heavy usage by other VPS users on the node? There is absolutely nothing that could cause a load in my vps as far as I see... Is this perfectly normal on any VPS?
You think this is funny? Not at all.
I'm on LON03 server and I recive yesterday from Future Hosting this advise about hight load.
I got then 1 month ago, and the solution was *JUST* to remove a phpBB website with 80+ users.
I do not believe that the VPS could get this kind of loads.
Funny is that the VPS was "monitored" by them at the same time. They say the load spikes out for times to times in a matter of seconds.
This load is taken from the Parallels Infrastructure Panel or even the Node Panel, not from the VSP itself. Even when I'm logged in.
I've been a client for 6 month, and 2 of the last 3 constantly getting CPU hight usage. Strange is, that I come from a 512mb/25gb PowerVPS server to a 1GB/30GB server, with the *SAME* sites.
Anyway, the prupose of this topic is to:
- check if anyone had this problem (problem is: beeing sure that this load is IMPOSSIBLE to be created from yout service)
- recommend a decent VPS provider besides Future Hosting and PowerVPS.
From time to time my server's loads are going upto 900s.. And it becomes nearly same days each week. I've checked that backups and crons are disabled.
View 14 Replies View RelatedIt has been running fine for almost six months now and now from past few days it's all gone in black zone?
PID USER PR NI %CPU TIME+ %MEM VIRT RES SHR S COMMAND
32084 nobody 16 0 73 2:00.34 0.9 162m 75m 8260 R /usr/local/apache/bin/httpd -DSSL
13857 nobody 16 0 50 1:13.53 0.7 147m 59m 7900 R /usr/local/apache/bin/httpd -DSSL
32114 nobody 15 0 36 1:46.67 0.4 117m 30m 8600 S /usr/local/apache/bin/httpd -DSSL
I get equal share from CPU plus it has got 384MB of memory? Why load is so high when I check in VPP......it is going in black and yellow zone in resources all the time?
It shows me following Parameters in QoS alerts
to know the load shown when doing a 'uptime' command is just for my VPS or the entire node?
what is the acceptable average load?
cos for mine, i see most the time is less than 1, but at times, for no particular reason that i know of, it can go up to between 5~10
i've heart that xen can handle loads better than vz or openvz. is this right?
View 0 Replies View RelatedI have a question regarding load on this cpu.
Current cpu load is around 1.7 - 2.1.
Is this to much, is it time to upgrade cpu or?
Server is running 32bit Centos 5.3.
top - 17:17:21 up 27 days, 16:24, 1 user, load average: 1.59, 1.43, 1.22
Tasks: 159 total, 1 running, 158 sleeping, 0 stopped, 0 zombie
Cpu0 : 9.0%us, 1.0%sy, 0.0%ni, 89.7%id, 0.3%wa, 0.0%hi, 0.0%si, 0.0%st
Cpu1 : 16.7%us, 1.0%sy, 0.0%ni, 82.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Cpu2 : 2.3%us, 0.7%sy, 0.0%ni, 97.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Cpu3 : 36.5%us, 2.7%sy, 0.0%ni, 60.5%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
Mem: 4148576k total, 2738172k used, 1410404k free, 410876k buffers
Swap: 2096440k total, 192k used, 2096248k free, 1413824k cached
Thank you,
s-f-r-j
I want to have a fail over for my server. I was told that load balancing is the way to go.
Could anyone give me some instructions of what I would require. My primary server contains Cpanel.
the loads on my server is VERY HIGH and it needs to be upgraded fast.
I really have no clue as what to do... and i do not know any expert other than you people here - to help me out and put me on the right track.
i was thinking of
1) Getting a server with better CPU and more RAM
2) Load Balancing
However I know nothing of load balancing (other than how to spell it correctly )
1) Which of the above two options should i choose?
2) what are the extra costs in load balancing?
3) what should i know about load balancing before deciding?
4) How does load balancing work? I know there are two server - like one for database and one as webserver... but how does this work together?
5) what config should i be looking at in the two servers?
I'll stop here else i can go on and on and on...
I am giving the details of my server and service below, in case you guys need it.
We host a large number of small websites and are looking for high-availability and the ability to do maintenance on our application servers, so I'm looking for a load balancing solution. At this point, I'm considering Zeus ZXTM LB software, the Coyote Point e350si, and potentially an F5 1500 LTM.
The F5 solution is a total budget buster, and the Coyote Point UI is rough around the edges, but I've used them and they are reliable. Zeus looks like a winner with a great UI, but I haven't heard much about their reliability.
Bandwidth requirements are low at this point, so this is mostly about reliability and ease of configuration of a moderately complex set of services.
Any opinions on these vendors, or alternates I should consider?
I run a GSP (Game Server Provider) and i just baught 2 new octi xeon servers(Intel 5320)
i am having a problem with the load balancing, it dosen't balance de cpu usage on all cores but only on one, and it gets at about 80-85% and 3%CPU usage on the other one.
I was currious as to some suggestions you guys may have for setting up a load balanced website...
I would preffer it to be software based and free as I am just using this for some testing purposes.
I'm looking at load balancing a group of servers located at different data centers.
How feasible is this? Which options/solutions should I take a look at?
I would like to route using some sort of IP tunneling or similar so that the user doesn't see ww1.domain.com etc.
I will be distributing the load of the static/dynamic web pages, no database clustering.
I would prefer something a bit more intuitive than round robin. Perhaps directing incoming traffic based on existing server load etc.
Most of the load balancing solutions I've looked at assume all your servers are on the same local network.
I'm just curious, how many around here use load balancers in front of their webservers, and what kind of traffic do you push with them? (What kind of load balancer as well) Any other specifics would be nice as well.
Also, do you have failover for your load bal?
Hi. Can you please tell me how hardware load balancers work? I mean. What would i have to do to load a balance a site of mine?
Also what type of price range would i be looking at and what to look out for.
I'm really curious what makes the high end load balancer better than the low end ones.
View 12 Replies View Related# apf -r
Unable to load iptables module (ip_tables), aborting.
# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
# uname -a
Linux servername 2.6.17.9 #1 SMP Sun Aug 27 17:08:11 ICT 2006 i686 athlon i386 GNU/Linux
is there any reason that I cannot use iptables? If I edit monokern option in apf to 1, I cannot use ftp in passive mode
My VPS holds about 80 domains and low-use accounts.
Every night, from around 1.30am, the load suddenly skyrockets and will usually be around 5 to 10 for a few hours. Occasionally it'll spike to 30+ for a few minutes.
I had some antispam software running, and a couple of other packages (mail queues, mail manage etc), so I disabled all of that and removed all the crontab entries etc.
It's not really made any difference.
I can see the load stats going back 8 hours, as part of the ASSP spam package (I've just left the ASSP server load cron running just so I can continue monitoring it!)
Can the apparent load on my VPS be caused by other VPS's on the same node?? So in reality, my load is fine but is being affected by other people's VPS's?
I hope that makes sense. I'm 99% sure that my VPS is 'clean' (in so far as cron entries)
I'm asking the question because I took a second VPS on the same node and that one too has high loads overnight when there's nothing running on it (ie, no add-on software, no Cpanel accounts added)
I have a cPanel VPS so I want to know the 'Server Load' appearing in cPanel, is it for my VPS or the whole server?
View 8 Replies View RelatedI understand how the load averages are calculated and what the numbers represent but what would be considered a high load average and at what point would the server need upgraded?
View 7 Replies View RelatedI have a VPS with LXadmin control panel and 1024 Ram.
the memory always 333-450 but now it is more than 800 and the VPS stopped I restarted it many times but after restarting it the memory gone crazy again.
So, how to know what causes high load and eating my Memory?
If everyone can take a look at this (while all domains were turned off) and give me any advice to what is eating up resources so badly? The load averages are at 1.3+ with only yum trying to run on the box and it has already been running to nearly two hours were this would typically take 10-15 minutes max prior.
Host: FutureHost
Type: VPS
DC: Dallas
Plan: VPS Elite with 1.5GB of memory
top - 11:40:21 up 2:26, 2 users, load average: 1.35, 1.39, 1.37
Tasks: 41 total, 1 running, 40 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.3%us, 0.0%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 1572864k total, 202300k used, 1370564k free, 0k buffers
Swap: 0k total, 0k used, 0k free, 0k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 15 0 1988 664 572 S 0 0.0 0:02.57 init
3572 admin 15 0 24488 9308 6072 S 0 0.6 0:00.11 php-cgi
3643 admin 15 0 24488 9324 6088 S 0 0.6 0:00.10 php-cgi
3685 apache 18 0 7940 3688 876 S 0 0.2 0:06.49 lighttpd
3686 admin 25 0 24076 7684 5096 S 0 0.5 0:00.05 php-cgi
3689 admin 25 0 24080 7684 5096 S 0 0.5 0:00.05 php-cgi
3690 admin 25 0 24080 7692 5096 S 0 0.5 0:00.05 php-cgi
3692 admin 20 0 24076 7684 5096 S 0 0.5 0:00.05 php-cgi
3693 admin 20 0 24076 7684 5096 S 0 0.5 0:00.05 php-cgi
3790 admin 20 0 24080 7688 5096 S 0 0.5 0:00.05 php-cgi
3905 admin 20 0 24072 7680 5096 S 0 0.5 0:00.05 php-cgi
4053 admin 20 0 24072 7680 5096 S 0 0.5 0:00.05 php-cgi
5252 admin 20 0 24080 7688 5096 S 0 0.5 0:00.06 php-cgi
5415 admin 15 0 24368 8820 5748 S 0 0.6 0:00.06 php-cgi
5628 admin 20 0 24076 7684 5096 S 0 0.5 0:00.06 php-cgi
5734 root 18 0 9844 2804 2268 S 0 0.2 0:00.52 sshd
5828 root 15 0 2516 1408 1116 S 0 0.1 0:00.02 bash
I have a VPS, and i wanted to know if the CPU / Load Average that shows at my Plesk control panel reports only the usage of my part of the server cpu, or if it is the real/complete cpu usage for the entire server?
So in a simple way, is another user with a vps at the same server is doing a high cpu task at is vps, will it show at my plesk cpu load average?
why when i wget large files around 300/500Mb in size the load on server goes 2.00+
View 7 Replies View Relatedi have a very high load in my node every time i monitor the load i see load average: 8.19 and some times it's go up to 60 - 80
i'm using this server
Intel Core2Quad Q9650
Ram 8GB
Bandwidth: 10000gb
Hypervm Control Panel
and there is only 6 vpses ....
That would be impossible as the LOAD as given in linux/unix has nothing to do with the cpu load of a server but the total of processes queued (waiting for their turn). If their main node has such a high queue count it should be fairly easy to see for them which process is causing that. No idea why some hosts keep sending their customers to fairytale land every time when it comes to linux load information. Anyways; Exim with that many processes doesnt sound to good either.
As for one VPS bringing down the main node; this is really not that strange as you keep in concideration that a VPS is still a node with many shared customers. Where some things can be regulated, like cpu cycles and memory, but if your node goes completely balistic on its disk IO it will bring a VPS-main node to its knees.