High Load Average

Dec 5, 2007

I have a new Quad core server which has a high load average. Only hosting about 200 sites on it and they are not database sites. Only a few MySQL sites.

Here is the output from top:

top - 15:12:06 up 13 days, 16:38, 1 user, load average: 14.66, 14.21, 12.81
Tasks: 247 total, 4 running, 241 sleeping, 0 stopped, 2 zombie
Cpu(s): 7.9%us, 6.6%sy, 0.0%ni, 79.6%id, 5.9%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3369172k total, 3244620k used, 124552k free, 6296k buffers
Swap: 2096472k total, 5180k used, 2091292k free, 2499476k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
29439 apache 18 0 148m 101m 4516 D 13 3.1 19:57.79 httpd
29444 apache 18 0 146m 98m 3668 R 12 3.0 11:15.56 httpd
1883 apache 18 0 147m 99m 3584 D 11 3.0 6:08.36 httpd
30263 apache 18 0 146m 99m 4116 D 11 3.0 14:58.88 httpd
1881 apache 18 0 147m 99m 3656 D 10 3.0 2:43.73 httpd
1884 apache 18 0 147m 99m 3632 D 10 3.0 4:15.96 httpd
4768 apache 18 0 149m 102m 4312 R 10 3.1 0:39.93 httpd
29443 apache 18 0 146m 98m 3620 D 10 3.0 24:53.11 httpd
30209 apache 18 0 147m 100m 4228 D 8 3.1 8:25.29 httpd
2230 apache 17 0 154m 108m 5048 D 8 3.3 0:02.94 httpd
1886 apache 18 0 147m 100m 3984 R 7 3.0 1:27.71 httpd
1882 apache 15 0 153m 106m 5328 S 3 3.3 0:01.68 httpd
8795 root 15 0 0 0 0 D 1 0.0 0:00.08 pdflush
273 root 10 -5 0 0 0 S 1 0.0 0:39.82 kswapd0
1984 root 10 -5 0 0 0 D 0 0.0 2:09.22 kjournald
5113 mysql 15 0 135m 33m 5460 S 0 1.0 15:55.22 mysqld

View 3 Replies


ADVERTISEMENT

High Load Average While Using SCP

Oct 22, 2009

I have to move about 50 GB each night from one server to another.

This is the command I'm using:

Code:

/bin/nice -n +19 scp -c blowfish -l 18000 -P 22222 root@XX.XX.XX.XX:/backup/dailybacks/*.tar.gz ./
There is no private lan so i have to use internet. I'm using blowfish, which will reduce cpu load, and also limiting bandwidth transfer, usign -l 18000. How ever, I still do see some high load averages..

Do you have any other suggestion to optimize CPU performance while running scp?

View 6 Replies View Related

Load Average Is High

Jun 20, 2009

Why my server - load average is high?

below is output of top:

top - 13:52:53 up 29 days, 5:39, 3 users, load average: 72.05, 68.90, 67.89
Tasks: 857 total, 2 running, 833 sleeping, 20 stopped, 2 zombie
Cpu(s): 4.2%us, 2.5%sy, 0.0%ni, 26.4%id, 63.6%wa, 0.5%hi, 2.8%si, 0.0%st
Mem: 8181908k total, 8135188k used, 46720k free, 35104k buffers
Swap: 4192956k total, 26624k used, 4166332k free, 7321172k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
337 mysql 15 0 327m 56m 4252 S 4.0 0.7 74:18.53 mysqld
24732 root 15 0 13380 1760 808 R 1.0 0.0 0:10.44 top
313 root 10 -5 0 0 0 S 0.3 0.0 90:25.28 kswapd0
22040 nobody 15 0 63148 3272 1572 S 0.3 0.0 0:00.30 httpd
22136 nobody 15 0 63148 3260 1572 S 0.3 0.0 0:00.21 httpd
22291 nobody 15 0 63148 3280 1580 S 0.3 0.0 0:00.18 httpd
22327 nobody 16 0 63148 3280 1580 D 0.3 0.0 0:00.20 httpd
22406 nobody 15 0 63148 3276 1580 S 0.3 0.0 0:00.18 httpd
22522 nobody 16 0 63148 3268 1580 S 0.3 0.0 0:00.10 httpd
23553 nobody 16 0 63148 3244 1556 S 0.3 0.0 0:00.09 httpd
23556 nobody 15 0 63148 3256 1568 S 0.3 0.0 0:00.09 httpd
26260 nobody 16 0 63148 3296 1608 S 0.3 0.0 0:00.13 httpd
26618 nobody 16 0 63148 3244 1556 S 0.3 0.0 0:00.13 httpd
28849 nobody 16 0 63148 3240 1556 S 0.3 0.0 0:00.04 httpd
28903 nobody 15 0 63148 3208 1532 S 0.3 0.0 0:00.02 httpd
29533 nobody 15 0 0 0 0 Z 0.3 0.0 0:00.02 httpd <defunct>
29558 nobody 15 0 63148 3236 1548 S 0.3 0.0 0:00.01 httpd
29587 nobody 15 0 63148 3216 1536 S 0.3 0.0 0:00.01 httpd
29592 nobody 15 0 63148 3208 1532 S 0.3 0.0 0:00.02 httpd
1 root 15 0 10344 576 544 S 0.0 0.0 0:05.36 init
2 root RT -5 0 0 0 S 0.0 0.0 3:58.90 migration/0
3 root 34 19 0 0 0 S 0.0 0.0 6:15.52 ksoftirqd/0
4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0
5 root RT -5 0 0 0 S 0.0 0.0 0:12.33 migration/1
6 root 34 19 0 0 0 S 0.0 0.0 0:30.07 ksoftirqd/1
7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1
8 root RT -5 0 0 0 S 0.0 0.0 0:02.57 migration/2
9 root 34 19 0 0 0 S 0.0 0.0 0:02.84 ksoftirqd/2
10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2
11 root RT -5 0 0 0 S 0.0 0.0 0:11.61 migration/3
12 root 34 19 0 0 0 S 0.0 0.0 0:01.12 ksoftirqd/3
13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3
14 root 10 -5 0 0 0 S 0.0 0.0 0:00.22 events/0
15 root 10 -5 0 0 0 S 0.0 0.0 0:00.10 events/1
16 root 10 -5 0 0 0 S 0.0 0.0 0:00.16 events/2
17 root 10 -5 0 0 0 S 0.0 0.0 0:00.09 events/3
18 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 khelper
87 root 10 -5 0 0 0 S 0.0 0.0 0:00.03 kthread
94 root 10 -5 0 0 0 S 0.0 0.0 0:00.78

View 14 Replies View Related

High Load Average

Apr 19, 2007

What would you call a high load average? What is the top number?

Does this look unhealthy?....

1:48PM up 562 days, 18:14, 4 users, load averages: 11.15, 9.11, 6.48

2:14PM up 562 days, 18:39, 4 users, load averages: 0.85, 2.38, 3.94

View 9 Replies View Related

CSF ( High 5 Minute Load Average )

Nov 6, 2009

i`m using csf + lfd on the server ( CentOS / Cpanel )

i have received the notification from my root user regarding the "High 5 minute load average "

i have just checked my apache but couldn`t find any problem , everything is normal , But what`s the notification for ?

Note : The email included 3 files ( Apache status files )

Time: Sat Nov 7 00:34:48 2009 +0330
1 Min Load Avg: 8.28
5 Min Load Avg: 8.26
15 Min Load Avg: 8.26
Running/Total Processes: 11/171

View 8 Replies View Related

Lfd: High 5 Minute Load Average Alert - 6.37

Mar 21, 2008

I use CSF on a VPS with 512 RAM and 1024 Busrt and the other day I received the below notification. My hostsaid it was Mailman and since I don't use mailing lists the recommendationwas to disable it. So I did. I'm curious tho as to why this happened in the first place.

Time: Wed Mar 19 17:53:33 2008
1 Min Load Avg: 11.41
5 Min Load Avg: 6.37
15 Min Load Avg: 2.70
Running/Total Processes: 12/94 ...............

View 0 Replies View Related

Plesk 11.x / Linux :: High CPU Wait I/O And Load Average During Backup

May 20, 2014

PRODUCT, VERSION, OPERATING SYSTEM, ARCHITECTURE
Parallels Plesk Panel 11.5.30 MU #44 CentOS 6.5 (Final) 64bit

2 of our our servers are suddenly experiencing high Wait I/O Times, and high Load Averages during the backup process. During this period the Plesk grinds to a halt, sometimes crashing out completely (although SSh is still possible. We have been in talks with our server suppliers (assuming this would be node related) however they have done a lot of testing etc. and categorically state the node is fine , with no other users affecting it.

STEPS TO REPRODUCE : We backup the server using the scheduled backup service and Wait I/O immediately goes up.

ACTUAL RESULT: Plesk downtime / Website downtime

EXPECTED RESULT: No downtime, successful back up

Some other info :
All other processes (MYSQL, apache, Nginx etc) are all running between 1 - 10%

Partition "/usr" utilization 4.2% used (1.81 GB of 43.3 GB) (?)
Partition "/var" utilization 50.6% used (61.8 GB of 122 GB) (?)

We are struggling to identify what has changed on the server that would cause this sudden change.

View 3 Replies View Related

Load Average

Apr 29, 2009

If everyone can take a look at this (while all domains were turned off) and give me any advice to what is eating up resources so badly? The load averages are at 1.3+ with only yum trying to run on the box and it has already been running to nearly two hours were this would typically take 10-15 minutes max prior.

Host: FutureHost
Type: VPS
DC: Dallas
Plan: VPS Elite with 1.5GB of memory

top - 11:40:21 up 2:26, 2 users, load average: 1.35, 1.39, 1.37
Tasks: 41 total, 1 running, 40 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.3%us, 0.0%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 1572864k total, 202300k used, 1370564k free, 0k buffers
Swap: 0k total, 0k used, 0k free, 0k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 15 0 1988 664 572 S 0 0.0 0:02.57 init
3572 admin 15 0 24488 9308 6072 S 0 0.6 0:00.11 php-cgi
3643 admin 15 0 24488 9324 6088 S 0 0.6 0:00.10 php-cgi
3685 apache 18 0 7940 3688 876 S 0 0.2 0:06.49 lighttpd
3686 admin 25 0 24076 7684 5096 S 0 0.5 0:00.05 php-cgi
3689 admin 25 0 24080 7684 5096 S 0 0.5 0:00.05 php-cgi
3690 admin 25 0 24080 7692 5096 S 0 0.5 0:00.05 php-cgi
3692 admin 20 0 24076 7684 5096 S 0 0.5 0:00.05 php-cgi
3693 admin 20 0 24076 7684 5096 S 0 0.5 0:00.05 php-cgi
3790 admin 20 0 24080 7688 5096 S 0 0.5 0:00.05 php-cgi
3905 admin 20 0 24072 7680 5096 S 0 0.5 0:00.05 php-cgi
4053 admin 20 0 24072 7680 5096 S 0 0.5 0:00.05 php-cgi
5252 admin 20 0 24080 7688 5096 S 0 0.5 0:00.06 php-cgi
5415 admin 15 0 24368 8820 5748 S 0 0.6 0:00.06 php-cgi
5628 admin 20 0 24076 7684 5096 S 0 0.5 0:00.06 php-cgi
5734 root 18 0 9844 2804 2268 S 0 0.2 0:00.52 sshd
5828 root 15 0 2516 1408 1116 S 0 0.1 0:00.02 bash

View 7 Replies View Related

VPS CPU Load Average

May 8, 2009

I have a VPS, and i wanted to know if the CPU / Load Average that shows at my Plesk control panel reports only the usage of my part of the server cpu, or if it is the real/complete cpu usage for the entire server?

So in a simple way, is another user with a vps at the same server is doing a high cpu task at is vps, will it show at my plesk cpu load average?

View 9 Replies View Related

VPS Load Average

Jul 8, 2007

What Should be load average of a VPS to be called as IDEAL?

View 12 Replies View Related

Load Average: 3.49, 3.79, 3.80

Feb 5, 2007

optimize MySql i have load average: 3.49, 3.79, 3.80

my server have more than 200 web site working online i have so many Mysql process ..

my server info:

CPUs:

Quote:

Processor #1 Vendor: GenuineIntel
Processor #1 Name: Intel(R) Xeon(TM) CPU 3.00GHz
Processor #1 speed: 2993.075 MHz
Processor #1 cache size: 2048 KB

Processor #2 Vendor: GenuineIntel
Processor #2 Name: Intel(R) Xeon(TM) CPU 3.00GHz
Processor #2 speed: 2993.075 MHz
Processor #2 cache size: 2048 KB

Processor #3 Vendor: GenuineIntel
Processor #3 Name: Intel(R) Xeon(TM) CPU 3.00GHz
Processor #3 speed: 2993.075 MHz
Processor #3 cache size: 2048 KB

Processor #4 Vendor: GenuineIntel
Processor #4 Name: Intel(R) Xeon(TM) CPU 3.00GHz
Processor #4 speed: 2993.075 MHz
Processor #4 cache size: 2048 KB

Memory Information:

Quote:

Memory: 5190364k/5767168k available (1877k kernel code, 51280k reserved, 759k data, 184k init, 4325120k highmem)

System Information:

Quote:

Linux 2.6.9-42.0.8.ELsmp #1 SMP Tue Jan 23 13:01:26 EST 2007 i686 i686 i386 GNU/Linux

PHP Version: 4.4.4
MySQL Version: 4.1.21-standard

MySql Settings :

Quote:

[mysqld]
skip-locking
character-sets-dir=/usr/share/mysql/charsets/
query_cache_limit=1M
query_cache_size=16M
query_cache_type=1
max_user_connections=100
max_connections=500
interactive_timeout=60
wait_timeout=30
connect_timeout=10
thread_cache_size=96
thread_concurrency=2
key_buffer=8M
join_buffer=1M
max_allowed_packet=24M
table_cache=1024
record_buffer=1M
sort_buffer_size=1024K
read_buffer_size=1024K
max_connect_errors=10
read_rnd_buffer_size=1024K
myisam_sort_buffer_size=16M
socket=/var/lib/mysql/mysql.sock
key_buffer_size=16M
[mysql.server]
user=mysql
basedir=/var/lib
[safe_mysqld]
open_files_limit=4096
[mysqldump]
quick
max_allowed_packet=8M
max_allowed_packet=8M
[mysql]
no-auto-rehash
[isamchk]
key_buffer=16M
sort_buffer=16M
read_buffer=8
write_buffer=8M
[myisamchk]
key_buffer=16M
sort_buffer=16M
read_buffer=8M
write_buffer=8M
[mysqlhotcopy]
interactive-timeout

View 13 Replies View Related

Virtuozzo Load Average

Aug 15, 2008

My site is running really slow at the moment. I checked Virtuozzo for resource usage, and it has been saying this for the past 1/2 hour.

CPU Usage: 0%
Load Average: Varies between 0.88 and 1.3 (anything over 1 is full capacity, and critical)

How can the load average be maxed out when my site hardly uses any CPU usage?

View 6 Replies View Related

Normal Load Average

Dec 19, 2008

I have a server with Core2Duo E6600 CPU, 4 gigs of RAM and 2x250 GB HDD's. What is the "normal" load average I can expect having ~50 websites running on it with medium visits. My current load averages (and most of the time ones) are:
load average: 0.24, 0.13, 0.16

Is this "normal"?

View 12 Replies View Related

How To Auto Reboot When Load Average = 5

Apr 4, 2008

how to auto reboot when load average =5. and send an email to me before reboot.

View 3 Replies View Related

Extracing Load Average From Uptime

Apr 27, 2007

I am trying just to extract the 5 minute load average from the output of a uptime command.

The output is as follows:

15:30:23 up 5:42, 3 users, load average: 0.03, 0.06, 0.08

So the value I need is 0.06.

View 9 Replies View Related

What Is The Maximum Suitable CPU Load Average

Jan 19, 2007

CPU load average is around 2-5% on my box. I'd like to know when I'll have to upgrade the CPU. Can I wait and add more accounts until it reaches 90%

View 12 Replies View Related

Displaying Server Load Average Through HTTP

Nov 26, 2008

to display the server load average through HTTP. How may I do that?

Please note that I have all insecure functions disabled, such as exec, system, etc... But I have root access.

View 11 Replies View Related

High Server Load / High Swap / Lots Of Httpd

Feb 20, 2008

I have a cPanel server with 4GB RAM

My server hangs time to time, once or twice a day. This is the last status when it happens.

Server Load 75.90 (2 cpus)
Memory Used 92 %
Swap Used 65.78 %

When I was still inside SSH when it happens, the processes I can see inside "top" are a lot of httpd processes.

So I "killall -9 httpd", I had to do it 30~40 times

#killall -9 httpd
#killall -9 httpd
#killall -9 httpd
x 30~40 times until no pid process found & the server load is back to normal.

Before that, I check httpd fullstatus, they look very normal, same goes to what I see inside WHM Apache status & cpu usage status.

At first I thought it was a memory problem after consulting with a server admin, so I replaced all 4GB new ram stick (such a waste)

View 12 Replies View Related

My Server Is Very Slow, High CPU, High Apache Load

Oct 31, 2009

My server is very slow, High CPU, High Apache load....

I got a new server and i had setup a script on it.

No server tweaks has been done.

I run a filehosting site so it gets very slow when traffic is high.

Here is some info:

Code:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4135 filedip 19 0 12812 8892 2212 R 18.9 0.4 0:00.74 index.cgi
3140 apache 15 0 22624 9604 2768 S 17.3 0.5 1:54.45 httpd
3556 apache 15 0 22792 9592 2768 S 17.3 0.5 0:43.53 httpd
3739 apache 15 0 22672 9556 2744 S 17.3 0.5 1:09.67 httpd
3884 apache 15 0 22664 9560 2744 S 17.3 0.5 0:23.98 httpd
3474 apache 15 0 22672 9572 2756 R 16.1 0.5 1:34.09 httpd
3548 apache 15 0 22792 9560 2740 S 16.1 0.5 1:33.67 httpd
3991 apache 15 0 22640 9588 2756 S 15.1 0.5 0:22.44 httpd
3475 apache 15 0 22672 9580 2756 S 13.2 0.5 1:31.42 httpd
3493 apache 15 0 22664 9592 2768 S 12.9 0.5 1:15.52 httpd
3769 apache 15 0 22664 9580 2756 S 12.9 0.5 0:45.19 httpd
3638 apache 15 0 22664 9576 2756 S 12.3 0.5 0:32.82 httpd
3724 apache 16 0 22664 9580 2756 R 12.3 0.5 0:34.25 httpd
3626 apache 15 0 22672 9580 2756 S 11.7 0.5 0:52.54 httpd
4023 apache 16 0 22792 9560 2740 R 11.3 0.5 0:13.16 httpd
3882 apache 15 0 22664 9576 2756 S 10.1 0.5 0:38.56 httpd
3005 apache 15 0 22672 9588 2768 R 9.1 0.5 2:06.61 httpd

I dont know much about server managment...

how to fix this so server doesnt go slow?

View 6 Replies View Related

Server High Load/high Mysql Usage

Jul 2, 2009

I have a site that is eating up my server resources and need to know what the best solution for this is. I'm thinking of getting another server just for mysql but do not know what specs the server should be to handle the current traffic/database load and have the site run smoothly without slowing down to a snail's pace.

An alternative is to get another server just for the videos being served and leave the database and html on the current server. This is where I'm stuck and don't know what route to take with this.

My current server stats:

Dual Xeon 5130
4GB RAM
250GB
50 Mbit/sec
CentOS 3.9

Website traffic stats:

15,000 visitors/day
150,000 pageviews/day
Serving videos

I've attached screenshots of top and bandwidth usage per day. Hopefully with this information you could tell me if I need another server or if there are any things I can do to the current server to help things move faster.

View 13 Replies View Related

High Load From High Iowait

Jul 2, 2008

I am running in a High load problem lately. I have one of those cheap 1and1 servers which was running fine until 2 weeks ago. Once I rebooted accidentaly, it did not come back with some unrepairable kernel errors and I had to re-image it.

I chose to reimage the server with CentOS 5, for better support. The new re-image worked fine for some days, at least so I thought and now I am having high loads. The server crashes if not monitored every moment as the load is unpredictable.

Just a restart of the Apache will bring the server back to normality, but I am not sure if it is apache or some other script to be blamed.
I have beeing monitoring through apache server-status, but I cannot organize something unusual in the high load moments.

At this moment for example:

top - 09:00:36 up 15:43, 3 users, load average: 3.57, 4.60, 5.32
Tasks: 144 total, 2 running, 142 sleeping, 0 stopped, 0 zombie
Cpu(s): 10.6%us, 6.5%sy, 0.0%ni, 18.7%id, 63.5%wa, 0.2%hi, 0.5%si, 0.0%st

12:00:29 AM CPU %user %nice %system %iowait %steal %idle
12:10:01 AM all 9.14 0.00 5.52 44.66 0.00 40.68
12:20:14 AM all 6.83 0.00 3.98 27.88 0.00 61.32
12:30:10 AM all 6.44 0.00 4.20 81.25 0.00 8.11
12:40:09 AM all 5.25 0.00 4.09 81.93 0.00 8.73
12:50:15 AM all 5.11 0.00 3.79 90.74 0.00 0.36
01:00:07 AM all 7.22 0.00 4.52 57.11 0.00 31.15
01:10:13 AM all 6.89 0.00 4.01 55.38 0.00 33.71
01:20:14 AM all 4.37 0.00 3.27 41.88 0.00 50.48
01:30:25 AM all 4.26 0.00 3.29 63.42 0.00 29.03
01:40:06 AM all 27.18 0.00 4.75 58.27 0.00 9.80
01:50:03 AM all 29.64 0.00 6.61 51.50 0.00 12.25
02:00:07 AM all 27.00 0.00 8.48 55.49 0.00 9.03
02:10:10 AM all 19.29 0.00 4.97 73.80 0.00 1.94
02:20:04 AM all 37.85 0.00 6.78 40.70 0.00 14.67
02:30:05 AM all 15.65 0.00 4.80 68.47 0.00 11.08
02:40:08 AM all 9.06 0.00 5.60 37.49 0.00 47.86
02:50:07 AM all 5.36 0.00 3.62 42.29 0.00 48.73
03:00:02 AM all 6.05 0.00 4.08 47.27 0.00 42.60
03:10:02 AM all 4.22 0.00 3.68 38.17 0.00 53.93
03:20:02 AM all 4.06 0.00 3.75 41.37 0.00 50.82
03:30:22 AM all 4.42 0.00 3.93 45.25 0.00 46.41
03:40:11 AM all 4.34 0.00 3.95 39.58 0.00 52.13
03:50:02 AM all 4.67 0.00 4.01 32.53 0.00 58.80
04:00:08 AM all 3.72 0.00 3.87 28.40 0.00 64.02
04:10:02 AM all 13.49 0.00 6.58 20.82 0.00 59.10
04:20:01 AM all 6.70 0.00 4.63 6.06 0.00 82.61
04:30:02 AM all 1.44 0.00 1.21 4.75 0.00 92.59
04:40:01 AM all 12.42 0.00 8.12 7.65 0.00 71.81
04:50:02 AM all 1.43 0.00 1.07 4.02 0.00 93.47
05:00:02 AM all 1.60 0.00 1.40 8.62 0.00 88.38
05:10:10 AM all 3.80 0.00 3.02 17.86 0.00 75.32
05:20:06 AM all 5.10 0.00 4.22 23.34 0.00 67.34
05:30:02 AM all 1.54 0.00 1.40 11.22 0.00 85.85
05:40:05 AM all 1.75 0.00 1.89 13.12 0.00 83.23
05:50:12 AM all 2.15 0.00 2.22 18.92 0.00 76.72
06:00:02 AM all 1.92 0.00 2.01 12.87 0.00 83.20
06:10:02 AM all 2.27 0.00 2.16 11.53 0.00 84.04
06:20:03 AM all 3.56 0.00 3.02 25.26 0.00 68.16
06:30:10 AM all 2.66 0.00 2.05 18.13 0.00 77.16
06:40:02 AM all 2.58 0.00 2.25 22.87 0.00 72.30
06:50:02 AM all 2.68 0.00 1.92 15.77 0.00 79.63
07:00:03 AM all 3.06 0.00 2.48 26.01 0.00 68.46
07:10:03 AM all 3.65 0.00 3.20 36.54 0.00 56.61

07:10:03 AM CPU %user %nice %system %iowait %steal %idle
07:20:03 AM all 4.40 0.00 3.28 43.86 0.00 48.46
07:30:02 AM all 4.10 0.00 3.17 31.30 0.00 61.43
07:40:06 AM all 7.67 0.00 3.95 50.79 0.00 37.59
07:50:02 AM all 4.72 0.00 3.11 44.30 0.00 47.86
08:00:03 AM all 5.57 0.00 3.72 47.15 0.00 43.56
08:10:07 AM all 10.66 0.00 3.59 71.62 0.00 14.13
08:20:17 AM all 5.67 0.00 3.42 58.81 0.00 32.10
08:30:10 AM all 11.12 0.00 3.49 76.71 0.00 8.67
08:40:03 AM all 7.00 0.00 3.36 47.94 0.00 41.71
Average: all 7.53 0.00 3.76 38.90 0.00 49.81
Some configurations:
The reimage partittioning looks like this:

/dev/sda1 950M 138M 765M 16% /
/dev/sda5 4.7G 1.9G 2.9G 40% /usr
/dev/sda7 63G 58G 5.0G 93% /var
/dev/sda6 4.7G 23M 4.7G 1% /home
none 1.0G 500K 1.0G 1% /tmp

KeepAlive On
MaxKeepAliveRequests 300
KeepAliveTimeout 15

<IfModule prefork.c>
StartServers 10
MinSpareServers 20
MaxSpareServers 50
ServerLimit 256
MaxClients 180
MaxRequestsPerChild 2000
</IfModule>

<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>

[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock

skip-locking
query_cache_limit=1M
query_cache_size=32M
query_cache_type=1
max_connections=250
interactive_timeout=100
wait_timeout=20
connect_timeout=10
thread_cache_size=80
key_buffer=64M
join_buffer=1M
max_allowed_packet=16M
table_cache=512
record_buffer=1M
sort_buffer_size=1M
read_buffer_size=1M
max_connect_errors=10
thread_concurrency=2
read_rnd_buffer_size=1M
myisam_sort_buffer_size=64M
server-id=1

processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 3
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 4
cpu MHz : 2793.324
cache size : 1024 KB

View 10 Replies View Related

High CPU Load But No High Process

Nov 8, 2008

I have extremely high CPU load average, but when I run TOP command there are not any process with high CPU

CPU load averages:
211.65 (1 min) 227.29 (5 mins) 247.89 (15 mins)
Tasks: 364 total, 2 running, 360 sleeping, 2 stopped, 0 zombie
Cpu(s): 0.0%us, 0.3%sy, 0.0%ni, 0.0%id, 99.7%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 2065460k total, 2012372k used, 53088k free, 60964k buffers
Swap: 2040212k total, 3280k used, 2036932k free, 619900k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
19871 root 15 0 4944 2488 1656 R 1 0.1 0:02.73 top
1 root 15 0 4208 1320 1136 S 0 0.1 0:01.55 init
2 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0
3 root 34 19 0 0 0 S 0 0.0 0:01.77 ksoftirqd/0
4 root RT 0 0 0 0 S 0 0.0 0:00.01 migration/1
5 root 34 19 0 0 0 S 0 0.0 0:01.16 ksoftirqd/1
6 root 10 -5 0 0 0 S 0 0.0 0:01.04 events/0
7 root 10 -5 0 0 0 S 0 0.0 0:00.65 events/1
8 root 10 -5 0 0 0 S 0 0.0 0:00.00 khelper
9 root 11 -5 0 0 0 S 0 0.0 0:00.00 kthread
35 root 10 -5 0 0 0 S 0 0.0 0:00.15 kblockd/0
36 root 10 -5 0 0 0 S 0 0.0 0:00.00 kblockd/1
37 root 15 -5 0 0 0 S 0 0.0 0:00.00 kacpid
127 root 10 -5 0 0 0 S 0 0.0 0:13.16 ata/0
128 root 16 -5 0 0 0 S 0 0.0 0:00.00 ata/1
129 root 10 -5 0 0 0 D 0 0.0 0:01.15 ata_aux
130 root 10 -5 0 0 0 S 0 0.0 0:00.00 kseriod
158 root 16 0 0 0 0 S 0 0.0 0:00.00 pdflush
159 root 15 0 0 0 0 D 0 0.0 0:01.00 pdflush
160 root 10 -5 0 0 0 S 0 0.0 0:10.68 kswapd0
161 root 11 -5 0 0 0 S 0 0.0 0:00.00 aio/0

So my server is "unresponsive" for abour 18 hours, burst net didnt answer my tickets and I dont know what to do. Ive been with this setup for almost 5 months with no problems, No changes have been made to hardware or software.

Im using Centos 5.0

View 10 Replies View Related

High VPS Load

Jun 24, 2009

My VPS holds about 80 domains and low-use accounts.

Every night, from around 1.30am, the load suddenly skyrockets and will usually be around 5 to 10 for a few hours. Occasionally it'll spike to 30+ for a few minutes.

I had some antispam software running, and a couple of other packages (mail queues, mail manage etc), so I disabled all of that and removed all the crontab entries etc.

It's not really made any difference.

I can see the load stats going back 8 hours, as part of the ASSP spam package (I've just left the ASSP server load cron running just so I can continue monitoring it!)

Can the apparent load on my VPS be caused by other VPS's on the same node?? So in reality, my load is fine but is being affected by other people's VPS's?

I hope that makes sense. I'm 99% sure that my VPS is 'clean' (in so far as cron entries)

I'm asking the question because I took a second VPS on the same node and that one too has high loads overnight when there's nothing running on it (ie, no add-on software, no Cpanel accounts added)

View 9 Replies View Related

What Causes High Load

Apr 19, 2009

I have a VPS with LXadmin control panel and 1024 Ram.

the memory always 333-450 but now it is more than 800 and the VPS stopped I restarted it many times but after restarting it the memory gone crazy again.

So, how to know what causes high load and eating my Memory?

View 6 Replies View Related

BFD And APF Cause High Load

Feb 6, 2008

when i install BFD and APF on my server thie processes appears every time on "top" commad on my server and it cuse hight load

------------------------------
4766 root 25 0 100 10:22.56 3.2 165m 130m 420 R grep -vf /usr/local/bfd/tmp/attack.pool.tmp
7747 root 25 0 100 30:20.34 9.8 430m 397m 420 R grep -vf /usr/local/bfd/tmp/attack.pool.tmp
----------------------------

View 1 Replies View Related

What Should I Consider A High Load On VPS

Jun 30, 2007

Just signed up for a VPS with solarvps, which so far is lightning fast compared to my shared reseller account with RZ.

I want to create a script which checks the server load and drops me a text message on my mobile if the server load hits a certain level.

Just wondering what I should consider a high server load?

The server is the JupiterLX UK one from solar vps with over just over 800mb of SLM RAM.

View 5 Replies View Related

High Load

May 11, 2007

Im in a VPS and everyday at the same hour goes very slowly due to high load problems.

The main site is a vBulletin forum and I get this error:
Too many connections

Ive change some details in my.cnf:

Quote:

max_connections=500
max_user_connections=70

But it didnt solve the problem.

This high load occurs at the same hour, I think that it is a cron job related problem, but this is my /etc/crontab

Quote:

# cat crontab
SHELL=/bin/bash
PATH=/sbin:/bin:/usr/sbin:/usr/bin
MAILTO=root
HOME=/

# run-parts
01 * * * * root run-parts /etc/cron.hourly
02 4 * * * root run-parts /etc/cron.daily
22 4 * * 0 root run-parts /etc/cron.weekly
42 4 1 * * root run-parts /etc/cron.monthly

View 5 Replies View Related

Load High

Nov 28, 2007

i was previously using maxclients 256 in httpd.conf and the load was normal even when the server was processing 256 requests..

recently i had changed it to 320 coz of which my load had increased a lot.. Now when i have decreased it back to 256 the load is still high even when the no of requests are just 150..

View 9 Replies View Related

High Load

Mar 18, 2007

i have trouble with transport from company to another company

and i had problem with the best company ( resellerzoom.com )

i order one month this palnt ( Failover Plans ) then i swa this messeage

[PHP]

Hello,

Accounts usage is very high, MEMORY usage is very high than allowed limit of 3% for Daily average. You still have Cpanel/FTp access.

========================

Account usage Daily average

Average CPU%:- 1.23
Average MEM%:- 3.24

Top Process %CPU 58.0
PHP Code:

Top Process %CPU 54.0 /usr/bin/php forumdisplay.phpTop Process %CPU 52.0 /usr/bin/php showthread.php 

i asked him what's can i do?

he toled me

PHP Code:

Upgrade to VPS or Semi-dedicated server 

i don't want Upgrade vps with same company

View 5 Replies View Related

High Load

Dec 30, 2007

How can you tell if your server was a victim of a DDOS attack? Server load goes so high that you cannot get in via SSH, and the server has to be power cycled to get back online. When it comes back online, load goes back up, we shut apache down, and the let the load come back down and then restart apache and everything is fine. Any way to determine what caused the load to skyrocket? System has APF, BFD, and mod_evasive installed.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved