Any of you use Central Backup festure in HyperVM?
I have a backup NAS from FDC but it uses FTP only.
Anyone use ftp backup with hypervm?
How do you set it up?
I'm thinking about using fun plug on the backup NAS but not sure if FDC allow it.
Do you think this configuration is doable?
Dual Core/Core2Duo
2GB Ram
500GB HDD
100mbps port
Win 2003/2008 Web Edition
~2000-3000GB bandwidth
~$100/month?
The only backup I could get from crissic was my hypervm backup...
Can anyone tell me if it's possible to just restore this backup on a new VPS and have the code and mysql back to life? At the moment i've looked into the backup and can see the html files and the mysql database files.
I have a VPS with one provider and have recently opened an account with another provider, I want exactly the same install on there as what I had on the old provider. Is it possible to backup the whole thing on the old VPS and then restore it on the new one?
This would save a lot of time editing and configuring files, and make the switch easy.
Would anyone happen to know the commands to restore a master backup file via command line on a hypervm master node?
View 2 Replies View RelatedIs it possible to export the MYSQL DB from an Hypervm backup file?
If possible,how to?
As I fail several times to restore it in Hypervm.
It's been a while since I've made a backup in HyperVM but in the past I've had no problems. I decided to make a new one after so long, but when I did I got the error "no permission to make back up []". I contacted my provider to fix it, but it's been almost 24 hours and they still haven't gotten anywhere it seems. They even asked for my DA login information which I don't think is needed to fix the problem but I provided it anyways.
My question is, is this problem really that hard to fix? How would one fix it? Maybe I can just tell the provider how to fix it so I can get this done ASAP and then I can get back to using my VPS.
I am wanting to backup my VPS, though the backup manager requires me to enter something for "Backup File Initial String". It is shown in ....
View 2 Replies View RelatedAnyone know of a host that runs XEN without HyperVM as it's control panel? I want to avoid HyperVM due to the 0day exploit in it.
View 10 Replies View RelatedI'm trying to setup a VPS with an IP from the pool and the pool is showing the folowing state:
85.xx.xxx.xxx 85.xxx.xxx.46 85.xxx.xxx.50 4/5
And the state ball it's grey and says All Assigned, but 85.xxx.xxx.50 shouldn't! And really the IP pings!
When I make ls -la in /vz/private it have a temp VPS I think.
total 28
drwxr-xr-x 6 root root 4096 Jun 18 01:32 .
drwxr-xr-x 8 root root 4096 May 9 03:01 ..
drwxr-xr-x 25 root root 4096 Jun 17 21:55 110
drwxrwxr-x 23 root root 4096 Jun 11 10:41 120
drwxr-xr-x 22 root root 4096 Jun 16 15:08 130
drwxr-xr-x 3 root root 4096 Jun 5 00:19 tmp.130-1
In the front page table it says 5 used IP but I have a directly assigned IP to the server 85.xxx.xxx.246 and I have no pools configured for it!
What can I do! I have already checked and I only have eth0 not secondary eth0:x
I see an enormous amount of companies offering HyperVM. I'm curios as to how many companies use it.. probably a large majority.
View 14 Replies View RelatedI currently have vps with Hypervm and I was wondering how do I add additional ip's from the ip pool? I do not see the ip pool in my administration panel. Would it be under the server pool? My provider allocates ips to the ip pool but I do not know how to add them myself.
View 1 Replies View RelatedI installed CSF on my hypervm node. Its installed and work correctly. But when i block a port, for example "80" i see "80" blocked to all vps too!
Where is issue and how can fix this problem?
Does anyone know where i can find an Trixbox ostemplate for HyperVM (xen)?
Or perhaps a site with ostemplate collections or something?
Or.. and this is fine too, a site with an explenation on how i can make my own templates?
which is better ? for create windows and linux VPS!
View 14 Replies View RelatedI am trying to create some vps using openvz but after creating the vps with the Centos basic template 304mb i can't ping the ip and i can't view the centos welcome page in my browser (using ip and not domain, so i don't need to change there anything yet) and the most important is that i can't connect to the vps using ssh
I aks for many good users about my problem but i don' found a solution yet.
I ask my DC about ip's and they told me that the ip's are routed in my server.
I follow this instructions:
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 50G 2.8G 44G 6% /
/dev/sda3 198M 21M 168M 11% /boot
/dev/sda5 408G 2.4G 385G 1% /vz
tmpfs 1012M 0 1012M 0% /dev/shm
I follow this:
I disable selinux by editing /etc/sysconfig/selinux and changing the line to selinux=disabled
and then run:
I just login using ssh as root and run the folllowing commands.
Did i have to move to another directory to run them or ?
setenforce 0
wget[url]
Next i open /etc/grub.conf
vi /etc/grub.conf
and change default=1 to default=0
Then i add the ip's at the pool and create a plan and then create a vps without any errors but nothing.
I try with my DC resolvers or the 4.2.2.1 4.2.2.2 but nothing.
I alo add at the settings the gateway with no results at all.
After all i can't ping the ip that the vps got from the pool even ping it and not possible to connect to it using the ssh Sad
How Can I Provide a Windows VPS On Xen-HyperVM!
View 6 Replies View RelatedIs HypereVm free? and if so how do you set it up.. do you just run the shell or?
View 14 Replies View RelatedWhen you're creating VPS container, you can ssh with that IP and login with your username and password correct? But, what is the problem when I successfully created a VPS, and when trying ssh into it, I can't. Ok, here we go. I want to create a 2nd vps and will be using it as my DNS server. I enter a set of IPs into HyperVM's IPpool. First IP: x.x.x.178 Last IP: x.x.x.182 Resolv Entries (space Separated) : Gateway (IP): x.x.x.x.177 NetMask: 255.255.255.248
Then I created a vps resource plan. And then I created a VPS and it use the first IP from above. I want to connect to SSH and want to make it as my DNS server but seems the IP are not responding, it wasn't even live. So, what is the problem here? Where I did wrong? Just to let you know, I successfully created 1 VPS before that and it works without any hiccups. Got even whm/cpanel installed as well on it. The thing that I suspected is that my DC pulled the IPs off me and assigned them to other server. Waiting for their reply on this though.
What does OpenVZ / w HyperVM
Can I distribute VPS through?
i have dedicated server. i want install hypervm on this server my work is sell vps.
of your seems xen is better or openvz for my work?
server is :
Intel 2.13Ghz Quad-Core Xeon X3210 Dell PowerEdge 840, 1066MHz, 2x4 MB L2 Cache
4GB DDR2 RAM
2x250GB HDD
Can someone point me to the a good thread where these two options are compared? Or can we start on here?
I am thinking about it from a VPS host perspective.
which one would you recommend?
because Virtuozzo is charged, i think it may more easy to manage for admin and user,
xen has it's own feature than Virtuozzo,but i feel hypervm is not very friendly to use ( my personal feeling)
I would like to know which clients would prefer Virtuozzo over HyperVM. Lets say there is a company offering Virtuozzo on there servers. However, there is another company offering HyperVM for a cheaper price. Neither companies are overselling. Would you be willing to pay the extra money for Virtuozzo? Or would you be happy with OpenVZ and HyperVM.
View 13 Replies View Relatedi've created VPS with OpenVZ.And there is some problem i have access the vps and it's show some error
Code:
VM creation has failed. Reason: Private area already exists in /vz/private/250
.At the moment i forgot my SSH details..only i know my hypervm "root" details..where i log with admin password.I need to fix this because some clients of my hosting company is waiting and my number of VPS is limited.
I just ordered a VPS at connectswitch and now I can login into HyperVM but, at the homepage of the VPS server there is the following error:
The VM () Doesn't Exist on localhost. If you have migrated the vps, you can manually change the server in the database using the below, Or restore from backup.
as you know hypervm has a 5VM license limit on it
i wanted to test that what happens if we create 6 VMs
but now i can not access some parts of hypervm
how can i delete the sixth vm from vm list ?
i have to dos this from shell because hypervm is not working
Should I use FreeVPS or HyperVM in terms of affordable/free VPS management?
View 9 Replies View RelatedAs well all know there has been a hypervm exploit which may have taken down fsckvps and other hosts have been having attacks. If possible install any program that will warn you of a connection to your server and or provide input on what it may or may not be.
I myself Just had a blank php format file uploaded to a clients vps and It tried accessing other vps servers. As far as I know the ip was rapidly changing and untraceable (this may or may not be from the exploit), If anyone else is having hypervm attacks or server attacks please post here so instead of working within our own company's we are working as a group of over 10 thousand+ wht members to solve this issue ourselves.
(mods may move this wherever)
When I try to add my ip it show error that the ip is already exist now I can not buy additional license. I submit ticket to lxlabs but no reply, If I change main Ip then it will make any difference to other VMs?
View 9 Replies View Relatedwhen I ordered new server , I ordered 12 IP's with it and then installed HyperVM on my server and tried creating a VM and I enter the secondl IP address assigned by datacenter to me and I see : Ip already in use , I rang up Datacenter I think they removed the IP's from my main server so that can be added in HyperVM , I added and I was able to make VPS now
and when I made VPS I assigned the ip to it say : xx.xx.xx.8 and selected 2 in Number Of Ips(from Pool) and according to that the next two IP's should be xx.xx.xx.9 and xx.xx.xx.10 correct? , I add them in new cPanel VPS and then I go to cPanel Basic Setup and assign xx.xx.xx.8 to my ns1... and xx.xx.xx.9 to my ns2 (Nameserver) and add those IP in namecheap to register nameservers and damn it doesnt work more than 24 hrs passed away not working yet
my Namecheap account says:
1 ns1...........xx.xx.xx.9
Created: 2008-03-17
2 ns2........xx.xx.xx.8
Created: 2008-03-17
tried nslookup and it says non-existant domain
