I did some googling and searching on Apache lounge forums prior to posting this question, but I didn't find a definite answer to whether is it ok to use Apache Httpd v2.4.X VC10
View 2 Replies
I am trying to restart my apache since i made changes to my php.ini file.
I tried using this command /etc/init.d/httpd restart which didnt work for me..any ideas guys? Its a basic dedicated server from a hosting company..
I recently updated to apache 2.2 and when I went to check
/usr/local/apache/conf/httpd.conf
I noticed that a lot of the stuff was missing from what I usually see in apache 1.3 Was a new file created when the update was finish? I used easyapache to make the update.
I was actually looking to change the
Keepalive
Timeout
MinSpareServers
MaxSpareServers
MaxRequestsPerChild
Etc...
But it doesn't look like it's in there.
how should I optimize httpd.conf on my server. Apache was set up by my friend, unfortunately it started to "stuck" lately during peak time. Browser is connecting to a website for a long time before it actually starts to load it.
My current setup:
Timeout 300
KeepAlive On
MaxKeepAliveRequests 300
KeepAliveTimeout 15
MinSpareServers 2
MaxSpareServers 5
StartServers 5
ServerLimit 650
MaxClients 650
Server:
Intel Quad-Core Xeon X3220 @ 2.40 GHZ
4x 2GiB Kingston ECC Not-Registred 667Mhz
2x 150GiB RaptorX 10k RPM, sw raid 1
tuning apache configurations, and would like to seek for some opinions on how I should optimize my httpd.conf
The server is primarily for downloads, serving file sizes that are around 100~200MB.
how I should configure my apache so it'll allow a better/faster/more stable environment?
Hardware Specs:
Intel Xeon 3220 Quad-Core (2.4Ghz)
2GB Ram
My current httpd.conf
ServerTokens None
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
Timeout 20
KeepAlive On
MaxKeepAliveRequests 100
KeepAliveTimeout 15
##
## Server-Pool Size Regulation (MPM specific)
##
# prefork MPM
<IfModule prefork.c>
StartServers 8
MinSpareServers 5
MaxSpareServers 20
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 4000
</IfModule>
# worker MPM
<IfModule worker.c>
StartServers 4
MaxClients 500
MinSpareThreads 25
MaxSpareThreads 100
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
httpd 2.4.4 x64 with php 5.5 x64 and mysql 5.6 x64, it worked just fine the first few days, but after a week or so, I'm starting to get this error:
[mpm_winnt:notice] [pid 1928:tid 552] AH00428: Parent: child process 8092 exited with status 255 -- Restarting.
What can cause that and how can I fix it?
I can't reach my website, I get a "corrupted content" error message in the browser.Looking into apache (version 2.4.7), I get
Code:
~$ apachectl -S
AH00526: Syntax error on line 22 of /etc/apache2/sites-enabled/000-default.conf:
SSLCertificateKeyFile: file '/etc/ssl/private/owncloud.key' does not exist or is empty
Action '-S' failed.
However, I double checked that the file is in the appropriate location and does contain the key, so maybe apache has no permission. afaik, it doesn't run as root all the time - or only for a short time?
permissions for the key file are as follows:
Code:
~$ sudo ls -l /etc/ssl/private/owncloud.key
-rw-r--r-- 1 root ben 1704 Sep 28 04:01 /etc/ssl/private/owncloud.key
, where ben is my normal user.
It was suggested to me on the httpd IRC channel that maybe apparmor was doing something wrong, but I don't know how to investigate that.
I keep trying to restart Apache but it wont restart... I run a command line to restart it, but nothing happens. Here is what I have tried:
Quote:
-bash-3.1# chroot /home/fatehost.net/runtime_layeredpanel/
fatehost:/# /etc/
bash: /etc/: is a directory
fatehost:/# /etc/init.d
bash: /etc/init.d: is a directory
fatehost:/# /etc/init.d/httpd-users
Usage: /etc/init.d/apache2 start|stop|restart|reload|force-reload
fatehost:/# /etc/init.d/httpd-users start
Starting web server: Apache2(98)Address already in use: make_sock: could not bind to address 205.209.135.132:80
no listening sockets available, shutting down
Unable to open logs
fatehost:/# /etc/init.d/httpd-users restart
Forcing reload of web server: Apache2httpd (pid 5955) already running
.
fatehost:/# /etc/init.d/httpd-users force-reload
Forcing reload of web server: Apache2.
fatehost:/# /etc/init.d/httpd force-reload
Forcing reload of web server: Apache2.
fatehost:/# /etc/init.d/httpd-users restart
Forcing reload of web server: Apache2httpd (pid 13475) already running
.
fatehost:/#
fatehost:/# /etc/init.d/httpd-users start
Starting web server: Apache2(98)Address already in use: make_sock: could not bind to address 205.209.135.132:80
no listening sockets available, shutting down
Unable to open logs
fatehost:/# /etc/init.d/httpd-users stop
Stopping web server: Apache2.
fatehost:/#
fatehost:/# /etc/init.d/httpd-users start
Starting web server: Apache2(98)Address already in use: make_sock: could not bind to address 205.209.135.132:80
no listening sockets available, shutting down
Unable to open logs
fatehost:/#
fatehost:/# sudo /etc/init.d/httpd-users stop
bash: sudo: command not found
fatehost:/# su root /etc/init.d/httpd-users restart
Forcing reload of web server: Apache2httpd (pid 20391) already running
.
fatehost:/# /etc/init.d/httpd-users reboot
Usage: /etc/init.d/apache2 start|stop|restart|reload|force-reload
fatehost:/# reboot
WARNING: could not determine runlevel - doing soft reboot
(it's better to use shutdown instead of reboot from the command line)
shutdown: timeout opening/writing control channel /dev/initctl
init: timeout opening/writing control channel /dev/initctl
fatehost:/# WARNING: could not determine runlevel - doing soft reboot
bash: WARNING:: command not found
fatehost:/# (it's better to use shutdown instead of reboot from the command line)
> shutdown: timeout opening/writing control channel /dev/initctl
> init: timeout opening/writing control channel /dev/initctl
>
fatehost:/# /home/fatehost.net/runtime_layeredpanel
bash: /home/fatehost.net/runtime_layeredpanel: No such file or directory
fatehost:/#
It's been happening on both my old and new server, was really hoping this would be fixed.
Basically, the httpd/apache service crashes or goes down making domain names and sites unable to load; although cPanel/WHM still accessible. This would go on for about 5 minutes OR until I restart httpd in root.
sites simply do not load or just timeout after a period of time.
This has become extremely annoying for both me and my clients because it makes it seem like we have downtime.
i ask of cpanel.net that why : my apache any 1h going to down and i force run restart httpd
cpanel :
Howdy,
This is occurring because your server is consistently hitting the maximum
allowed concurrent connection limit, defined by MaxClients in httpd.conf:
[root@part7 ~]# grep MaxClient /usr/local/apache/logs/error_log | tail -5
[Mon Oct 22 13:07:46 2007] [error] server reached MaxClients setting, consider
raising the MaxClients setting
[Mon Oct 22 13:32:03 2007] [error] server reached MaxClients setting, consider
raising the MaxClients setting
[Mon Oct 22 14:03:29 2007] [error] server reached MaxClients setting, consider
raising the MaxClients setting
[Mon Oct 22 14:16:07 2007] [error] server reached MaxClients setting, consider
raising the MaxClients setting
[Mon Oct 22 16:48:36 2007] [error] server reached MaxClients setting, consider
raising the MaxClients setting
[root@part7 ~]#
You will need to adjust this setting to a value which better accommodates your
server to prevent any further downtime.
Code:
[root@serwer /]# httpd restart
/usr/sbin/httpd restart: httpd not running, trying to start
/usr/sbin/httpd restart: httpd could not be started
Code:
[root@serwer /]# httpd status
Looking up localhost
Making HTTP connection to localhost
Alert!: Unable to connect to remote host.
lynx: Can't access startfile [url]
My development environment is:
OS: Windows 2003 SP2
Httpd: 2.4.9
JDK: 1.7.0_60
Tomcat: 7.0.45
mod_jk: 1.2.40
When I deploy my application into tomcat, and bind httpd with AJP, httpd do not response occasionally, it will halt 2-3 minutes. The quickly way is restart httpd
I am having a problem on my VPS. I am running the latest version of Apache on Windows Server 2K3, and after editing httpd.conf to allow virtual hosts (#Include /conf/extra/httpd-vhosts.conf) and trying to restart the service, an error appears saying the operation failed.
I have even tried restarting/starting the service via services.msc
If I am not using the default httpd.conf Apache will not restart at all... it is very strange. I have also tried doing a repair of the installation of Apache.
When I look at my Current CPU Usage / process manager, I see this:
Pid |Owner | Priority | Cpu % |Mem % | Command
13754 | nobody | 0 | 2.2 | 4.0 |/usr/local/apache/bin/httpd -k start -DSSL
I've got about 9 more of these, and it keeps eating up the memory. What is it and what can I do? Is it just apache running?
I am using windows 2008 R2 64 bit O.S, I downloaded httpd-2.4.10-win64-VC11 and tomcat-connectors-1.2.39-windows-x86_64-httpd-2.4.x and I created 3 tomcat workers and then I configured workers.properties and httpd.conf.
After complete setup when i tried using
http://localhost then
I got It works! message (looks everything is fine).
and then I have deployed my sample web application I tried to access the same application then using
http://localhost/SampleCluster
I am getting
503 service not available.
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
New to Apache Web Server. Built the self signed certs, and tried to bring up server after configuring the httpd.conf file.I also included the section of the error log file that is pertinent.httpd.conf removed, use past bin.
View 1 Replies View RelatedWhen i do httpd -S i notice one of my sites show with 2 config source. but i just config one file for the site.
for example:
[root@apachesrv ~]# httpd -S | grep devel.site.com
default server devel.site.com (/etc/httpd/sites/000-default.site.com:1)
port 80 namevhost devel.site.com (/etc/httpd/sites/000-default.site.com:1)
port 80 namevhost devel.site.com (/etc/httpd/sites/devel.site.com:1)
the problem is the following, when i do reload and in this moment the config is bind this result, the site is blank.
Why it shows me this.
version of apache
Server version: Apache/2.2.15 (Unix)
I've got a problem at a local customer with rotatelogs.exe and the current release of Apache HTTPD 2.4.12.
I've downloaded the 64-bit zip-file (VC11) and installed the VC11 vcredist in both 32- and 64-bit version.
The project is to upgrade apache 2.2 to apache 2.4. I've adjusted the configuration and added rotatelogs for log rotation for error_log and access_log.
The configuration is 100% correct, I can copy the line to cmd.exe and it runs correctly.
Variables are set in global environment, APACHE_HOME is set with "/" instead of "" to get sure rotatelogs.exe is found.
Out of nowhere apache stops working, and I have to restart the httpd service that restablesca
The message it throws is "Service Unavailable"
The server is a CentOS Linux Centos 6.5
It has 24 cores and 24 GB RAM
These are the values that I have in httpd.conf
Timeout 60
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 15
[Code]....
after installed php 5.2.10
nobody /usr/local/apache/bin/httpd -k start -DSSL
Code:
5896 nobody 0
81.5
1.3 /usr/local/apache/bin/httpd -k start -DSSL
mysql (5.0.81-community)
os : centos 5.3
Has been very fast server. Guide is accurate and if you leave.
I've got a VPS with XenSmart, and I'm running CentOS. Recently, I have been needing to redirect my users to 'www.', since if they don't put the 'www.' in front of the domain the vB forum doesn't run properly. Though, to do this, I edited the .htaccess file and was using the 'mod_rewrite' command, but this requires Apache.
So, on my VPS I've installed Apache, and set LXAdmin to use 'httpd' instead of 'lighttpd', though now my web pages wont show up and all I've got is the default Apache web page:
[url]
How am I able to use Apache (HTTPD) and have it load my current forum? My current forums hosted in:
/home/admin/public_html/vb
[root@server1 ~]# service httpd start
no listening sockets available, shutting down
Unable to open logs
CENTOS Enterprise 4.6 i686 on standard - WHM X v3.1.0
apache 2.2
httpd.conf file was empty... I'm recompiling right now.
to install mod_evasive module on our Apache2 that runs on Fedora server. However, for that we need Apache's apxs to compile it. We found out that we can do that by running the
yum install httpd-devel
However, when we run that, we get the following:
=============================================================================
Package Arch Version Repository Size
=============================================================================
Installing:
httpd-devel i386 2.2.8-1.fc7 updates 144 k
Updating:
httpd i386 2.2.8-1.fc7 updates 1.0 M
openldap i386 2.3.34-7.fc7 updates 291 k
Installing for dependencies:
apr-devel i386 1.2.8-6 fedora 170 k
apr-util-devel i386 1.2.10-1.fc7 updates 54 k
cyrus-sasl-devel i386 2.1.22-8.fc7 updates 351 k
db4-devel i386 4.5.20-5.fc7 fedora 2.3 M
expat-devel i386 1.95.8-9 fedora 129 k
openldap-devel i386 2.3.34-7.fc7 updates 1.5 M
Updating for dependencies:
httpd-manual i386 2.2.8-1.fc7 updates 821 k
mod_ssl i386 1:2.2.8-1.fc7 updates 85 k
openldap-clients i386 2.3.34-7.fc7 updates 179 k
Transaction Summary
==========================================
Install 7 Package(s)
Update 5 Package(s)
Remove 0 Package(s)
Total download size: 7.0 M
We're kind of cautios, because we have never updated Apache on our live server. We'd prefer if we could download and install just the httpd-devel module. Is this possible?
If not, would this mess up any of our existing configuration? Could we expect any problems? And do we need to shut Apache down, then run the updates and only then restart it?
httpd server configuring.I share my files only from local disks but some of my resources are located on truecrypt secure volume.When I want to start my server now I have to mount my all drives first to have all path active. Otherwise httpd doesn't start with 'invalid path' error.My question is, how to force httpd starting without path or drive exists checking?
Platform Windows7 x64
Apache version 2.4.3
Package Xampp
i am using seperate server for sql .But my httpd server failed many time when i checked maximum number of httpd connection then my sql server using too many connection what is the reason of this problem . Is my sql server using as a slave in a ddos attack or sql server need http connection?
View 2 Replies View RelatedI trying:
Code:
[root@serwer /]# httpd restart
/usr/sbin/httpd restart: httpd not running, trying to start
/usr/sbin/httpd restart: httpd could not be started
Code:
[root@serwer /]# /etc/rc.d/init.d/httpd configtest
Syntax OK
Help
Cpanel with Cent os
i have creat my new user and upload his files on it. but when i try this link:
http://ip/~user
i have this error and my friend say that your httpd have problem. but its my new server. how can i solve it ?
404 Not Found
The server can not find the requested page:
ip/~user (port 80)
Please forward this error screen to 69.197.166.71's WebMaster.
Apache/2.0.63 (Unix) mod_ssl/2.0.63 OpenSSL/0.9.8b mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 PHP/5.2.8 Server at 69.197.166.71 Port 80
i try it with his doamin and i have same error.
I have 1764 pid started by httpd daemon. I think for some reason the httpd pid is not closing for me. How do i make sure that all of the httpd pid are closing.
View 2 Replies View RelatedI know that there are a lot of posts about this but... i have a problem w my apache... it was working fine until today... i get this e-mail from WHM whenever httpd fails... and its pretty often:
Quote:
httpd failed @ Mon Aug 18 16:23:13 2008. A restart was attempted automagically.
Failure Reason: Timeout while trying to connect to service
I wanna know how to check in the error log the entries of just today. because when i put "cat error_log" i start receiving things from last week and this is happening today...
i've tried /scripts/rebuildhttpdconf and then restarted, but still the same.
I just got apache installed on my box and the process is running. However when I enter my ip address on firefox, nothing loads up and I get a timeout error.
View 8 Replies View Related
