After Reinstalling Apache And PHP What Else?

May 11, 2008

I had to reinstall Apache and PHP because something went corrupt with them on the server.

After I sucessfully reinstalled, a lot of bugs and SQL/PHP errors starting showing up server-wide.

So I am wondering, after the reinstall, what else is needed to be done? Is my past configuration lost? Modules/addons need to be reinstalled and configured as well?

View 4 Replies


ADVERTISEMENT

Reinstalling Wget

Jul 2, 2009

I just accidentally removed wget on my server via rpm

How do I reinstall it back using rpm?

I try yum install wget but it doesn't work

I'm using centOS5.

View 7 Replies View Related

Reinstalling Wamp

Jul 5, 2009

I started learning how to use Magento's eCommerce solution, and I ran into a problem when I mistakenly changed the root pw for my phpMyAdmin area. After trying to find a fix online, it seemed like the best thing to do would be to reinstall WAMP. So I uninstalled it using Control Panel's 'Add or Remove Programs.' After reinstalling WAMP, I am having difficulty getting it to work properly.

When I try to launch Wamp (WampServer 2), I get an alert saying "Apache HTTP Server has encountered a problem and needs to close. We are sorry for the inconvenience." The message and the error signature are as follows:

But for some reason, the WAMP system try icon says that it's online (It shows a semicircle with 3/4 of it colored yellow.) However, when I try to connect to the localhost in my browser, I get the following message: Failed to Connect Firefox can't establish a connection to the server at localhost.

View 2 Replies View Related

Reinstalling Packages On Debian

Feb 27, 2007

Linux user trying to install a few packages on a new dedicated Debian server.

Following some tutorials, I installed Apache1.3 & PHP4 using apt-get install and had them up and running no problem.

I then decided to change the versions, so removed them using apt-get remove and deleted the relevant folders from /etc (this was before I knew of the apt-get --purge option).

I then tried to install Apache2 and PHP5, and although it appears to have worked, folders are not created for them in /etc so it doesn't work.

Is there a way of doing a fresh clean install so that the folders are created? I've tried apt-get clean without success.

Alternatively, a way to rollback Debian to it's previous state before I got my grubby little hands on it!

View 2 Replies View Related

Plesk 12.x / Linux :: After Reinstalling MTA / Postfix Crashed?

Jul 19, 2014

after reinstalling the mta / postfix / smtp (because I couldn't send mails) my plesk is crashed.

I wanted to log in as admin but it doesn't accept my PW. Now with root and then it wants me to accept the license.

Now I copy all my /var/www/vhosts/ maybe when I do the setup steps in plesk it will overwrite all my website content... I hope not all plesk settings are away.

Why I pay every month money for a license? The trouble and work I have with Plesk..

View 4 Replies View Related

Apache :: Capturing Internal Apache Errors Return Custom HTTP Status

Nov 15, 2013

Server Version: Apache/2.2.22 (Unix)

On our production service, we've been getting numerous malformed POST requests to some of our CGI scripts that are showing up as 500 errors in our logs. They are malformed in the sense that the actual content length doesn't match the Content-Length specified in the request.

Here's the most trivial example I can come up with that reproduces the problem for us:

POST /some_valid_alias HTTP/1.1
Host: example.org
User-Agent: Arbitrary/1.0
Content-Type: multipart/form-data; boundary=---------------------------41184676334
Content-Length: 769
-----------------------------41184676334

In addition to the 500 error in the access log, we see the corresponding error in the error log:

(70014)End of file found: Error reading request entity data

Based on the nature of the POST request and the error response, it does appear that Apache is doing the right thing here.

The POST never actually makes it as far as the script being targeted (/some_valid_alias in the above example); in other words, Apache returns 500 to the client, writes the error to the error log and never executes the script.

Is there a way to capture/avoid internal Apache errors like 70014, and return some other HTTP status besides 500 (like 403)? It's particularly annoying in our case, because our server sends us an email for all 500 errors.

So far, our best "defense" against these 500 errors is to disallow POST for these aliases, which normally just ignore the POST data anyway (when the request is not malformed):

RewriteCond %{REQUEST_METHOD} ^POST$
RewriteRule ^/(some_valid_alias)(.*)$ $1$2 [R]

But this won't work for all our scripts, because in some cases we do want to permit POST.

View 2 Replies View Related

Apache Procs Constantly Rise, Until Apache Is Restarted

Jul 23, 2007

I've had this problem a long time now with my hosting network and decided to ask here hoping I get some good solutions, or if someone is willing to looking at this (I'll pay if they want).

Here's what I mean:
[url]

Problem is as you can see apache processes constantly rise infinitely, at least until I restart apache (/etc/init.d/httpd restart). The point of restart is shown in red lines.

And after restart, it goes down again for X amount of hours then eventually rises again infinitely until it's restarted again.

But the fact that after restart it remains down, it means it had the potential to be down all along.

So my question is: what could be causing this and does anyone have solution to keep them low at all times (as per graphs)?

View 14 Replies View Related

Increasing The Apache ServerLimit In Apache 2.2.8 Version.

May 28, 2008

The Linux Server got down when the MaxClients 256 is reached.
Error Log:

"server reached MaxClients setting, consider raising the MaxClients setting"

So that I have tried to increased the MaxClients Value to 500, after changed the value in httpd.conf and restart I get following error message.

" [notice] SIGHUP received. Attempting to restart
WARNING: MaxClients of 500 exceeds ServerLimit value of 256 servers,
lowering MaxClients to 256. To increase, please see the ServerLimit
directive."

So that I tried changed the Server limit in /usr/local/apache/include/httpd.h header file. but it seems like there is no entry.

Apache Version : 2.2.8

So I have added the ServerLimit 500 entry in httpd.conf file and restart the httpd service. But still shows the same warning mesg. Please help me regarding this.

We have the Dedicated server for Flash Game Server with following configuration.

RHEL4 OS
2GB RAM
Intel(R) Xeon(R) X3210 @ 2.13GHz
Cpanel Installed.
Apache 2.2.8
PHP 5.2.4
MySQL 4.1.2 (MySQL Server is working in differend server)

View 7 Replies View Related

.htaccess Issue With Apache 1.3, But Works On Apache 2.2

Mar 22, 2008

I have the following Apache redirect code in .htaccess:

RewriteRule ^sap-latest-news/([0-9]*)/([A-Za-z0-9_-.]*).htm$ /domain.com/app/modules/content/latestNews.php?id=$1 [L]

This redirect works fine on Apache 2.2.8, but doesn't work on Apache 1.3.41

The following is the entry from error_log:
RewriteRule: cannot compile regular expression '^sap-latest-news/([0-9]*)/([A-Za-z0-9_-.]*).htm$'

A simple Rewrite is working fine in Apache 1.3, but the above regualar expression doesn't seem to be working on Apache 1.3. Does anyone know whether Apache 1.3 doesn't support it?

View 3 Replies View Related

Installed Apache And PHP Only Seeing Default Apache Page

Jun 1, 2007

I am having an issue where I have a server that Directadmin is installed on. I go to the a url that is on the server and all i see is the default page of apache saying congrats, it is installed. Although there is no file like that in the public_html any longer and I can see my files in the public_html folder of that specific site.

View 6 Replies View Related

Downgrade CentOS 5's Apache 2 To Apache 1.3

Jan 3, 2008

I've been searching around with google regarding how to downgrade the Apache 2.2 which comes with CentOS 5 to Apache 1.3.39.

View 2 Replies View Related

Performance: Apache 2 Prefork Vs Apache 1.3

Jan 12, 2008

I'm building a new server for a predominantly php5/mysql5 website and was wondering which version of apache to put on. I know there are some issues with PHP and Apache in MPM, but what's the performance comparison between Apache 1.3 and Apache 2 Prefork?

View 4 Replies View Related

Can Not Compile Htppd Apache Because Of Apache APR

Aug 6, 2008

I am trying to install dedicated web server on my Slackware 12.0.0 machine. I am a novice in Linux, but succeeded in MySQL & proFTPd installation. The problem now in httpd compiling.

I downloaded the latest Apache 2.2.9, but it needs Apache Portable Runtime 1.3.2 installed. I downloaded 1.3.2 version and run ./configure

1. checking size of size_t... 4
2. checking which format to use for apr_size_t... %u
3. checking size of off_t... 4
4. checking for mmap64... yes
5. checking for sendfile64... yes
6. checking for sendfilev64... no
7. checking for mkstemp64... yes
8. checking for readdir64_r... yes
9. checking which type to use for apr_off_t... off64_t
10. checking whether ino_t and unsigned long are the same... yes
11. configure: using unsigned long for ino_t
12. checking size of pid_t... 4
13. checking whether byte ordering is bigendian... no
14. checking size of struct iovec... 8
15. checking for strnicmp... no
16. checking for strncasecmp... yes
17. checking for stricmp... no
18. checking for strcasecmp... yes
19. checking for strdup... yes
20. checking for strstr... yes
21. checking for memchr... yes
22. checking for strtoll... yes
23.
24. Checking for DSO...
25. checking for dlopen... no
26. checking for dlopen in -ldl... yes
27. adding "-ldl" to LIBS
28. checking for dlsym... yes
29.
30. Checking for Processes...
31. checking for waitpid... yes
32. checking for Variable Length Arrays... yes
33. checking struct rlimit... yes
34.
35. Checking for Locking...
36. checking for semget... yes
37. checking for semctl... yes
38. checking for flock... yes
39. checking for semaphore.h... (cached) yes
40. checking OS.h usability... no
41. checking OS.h presence... no
42. checking for OS.h... no
43. checking for library containing sem_open... none required
44. checking for sem_close... yes
45. checking for sem_unlink... yes
46. checking for sem_post... yes
47. checking for sem_wait... yes
48. checking for create_sem... no
49. checking for working sem_open... yes
50. checking for union semun in sys/sem.h... no
51. checking for LOCK_EX in sys/file.h... yes
52. checking for F_SETLK in fcntl.h... yes
53. checking for SEM_UNDO in sys/sem.h... yes
54. checking for POLLIN in poll.h sys/poll.h... yes
55. checking for PTHREAD_PROCESS_SHARED in pthread.h... yes
56. checking for pthread_mutexattr_setpshared... yes
57. checking for working PROCESS_SHARED locks... yes
58. checking for robust cross-process mutex support... yes
59. decision on apr_lock implementation method... SysV IPC semget()
60. checking if all interprocess locks affect threads... no
61. checking if POSIX sems affect threads in the same process... no
62. checking if SysV sems affect threads in the same process... no
63. checking if fcntl locks affect threads in the same process... no
64. checking if flock locks affect threads in the same process... no
65. checking for entropy source... /dev/urandom
66.
67. Checking for File Info Support...
68. checking for struct stat.st_blocks... yes
69. checking for struct stat.st_atimensec... no
70. checking for struct stat.st_ctimensec... no
71. checking for struct stat.st_mtimensec... no
72. checking for struct stat.st_atim.tv_nsec... yes
73. checking for struct stat.st_ctim.tv_nsec... yes
74. checking for struct stat.st_mtim.tv_nsec... yes
75. checking for struct stat.st_atime_n... no
76. checking for struct stat.st_ctime_n... no
77. checking for struct stat.st_mtime_n... no
78. checking for inode member of struct dirent... d_fileno
79. checking for file type member of struct dirent... d_type
80.
81. Checking for OS UUID Support...
82. checking uuid.h usability... no
83. checking uuid.h presence... no
84. checking for uuid.h... no
85. checking uuid/uuid.h usability... yes
86. checking uuid/uuid.h presence... yes
87. checking for uuid/uuid.h... yes
88. checking for library containing uuid_create... no
89. checking for library containing uuid_generate... -luuid
90. checking for uuid_create... no
91. checking for uuid_generate... yes
92. checking for os uuid usability... yes
93.
94. Checking for Time Support...
95. checking for struct tm.tm_gmtoff... yes
96. checking for struct tm.__tm_gmtoff... no
97.
98. Checking for Networking support...
99. checking for type in_addr... yes
100. checking if fd == socket on this platform... yes
101. checking style of gethostbyname_r routine... glibc2
102. checking 3rd argument to the gethostbyname_r routines... char
103. checking style of getservbyname_r routine... glibc2
104. checking if TCP_NODELAY setting is inherited from listening sockets... yes
105. checking if O_NONBLOCK setting is inherited from listening sockets... no
106. checking whether TCP_NODELAY and TCP_CORK can both be enabled... yes
107. checking for TCP_CORK in netinet/tcp.h... yes
108. checking for TCP_NOPUSH in netinet/tcp.h... no
109. checking for SO_ACCEPTFILTER in sys/socket.h... no
110. checking whether SCTP is supported... no
111. checking for struct ip_mreq... yes
112. checking for set_h_errno... no
113.
114. Checking for IPv6 Networking support...
115. checking for library containing getaddrinfo... none required
116. checking for library containing gai_strerror... none required
117. checking for library containing getnameinfo... none required
118. checking for gai_strerror... yes
119. checking for working getaddrinfo... yes
120. checking for negative error codes for getaddrinfo... yes
121. checking for working getnameinfo... yes
122. checking for sockaddr_in6... yes
123. checking for sockaddr_storage... yes
124. checking for working AI_ADDRCONFIG... yes
125. checking if APR supports IPv6... yes
126. checking langinfo.h usability... yes
127. checking langinfo.h presence... yes
128. checking for langinfo.h... yes
129. checking for nl_langinfo... yes
130.
131. Restore user-defined environment settings...
132. restoring CPPFLAGS to ""
133. setting EXTRA_CPPFLAGS to "-DLINUX=2 -D_REENTRANT -D_GNU_SOURCE -D_LARGEFILE64_SOURCE"
134. restoring CFLAGS to ""
135. setting EXTRA_CFLAGS to "-g -O2 -pthread"
136. restoring LDFLAGS to ""
137. setting EXTRA_LDFLAGS to ""
138. restoring LIBS to ""
139. setting EXTRA_LIBS to "-luuid -lrt -lcrypt -lpthread -ldl"
140. restoring INCLUDES to ""
141. setting EXTRA_INCLUDES to ""
142. configure: creating ./config.status
143. config.status: creating Makefile
144. config.status: creating include/apr.h
145. config.status: creating build/apr_rules.mk
146. config.status: creating build/pkg/pkginfo
147. config.status: creating apr--config
148. config.status: WARNING: 'apr-config.in' seems to ignore the --datarootdir setting
149. config.status: creating apr.pc
150. config.status: creating test/Makefile
151. config.status: creating test/internal/Makefile
152. config.status: creating include/arch/unix/apr_private.h
153. config.status: executing default commands
154. config.status: include/apr.h is unchanged
155. config.status: include/arch/unix/apr_private.h is unchanged

After that I am trying make and have error at the end:

make[1]: Entering directory `/root/build/apr-1.3.2'
/bin/sh /root/build/apr-1.3.2/libtool --silent --mode=link gcc -g -O2 -pthread -DHAVE_CONFIG_H -DLINUX=2 -D_REENTRANT -D_GNU_SOURCE -.....

View 0 Replies View Related

Apache Down In The Middle Of Recompiling Apache (via Whm)

Nov 12, 2008

In the middle of recompiling apache (via whm) after upgrading postgresql to 8.3, apache went down and remains down even after restart. Recompile is still in progress (about 15 minutes in)

tail -f /usr/local/apache/logs/error_log
[Wed Nov 12 15:24:44 2008] [warn] No JkShmFile defined in httpd.conf. Using default /usr/local/apache/logs/jk-runtime-status
[Wed Nov 12 15:24:44 2008] [notice] ModSecurity for Apache/2.5.7 (http://www.modsecurity.org/) configured.
[Wed Nov 12 15:24:46 2008] [warn] No JkShmFile defined in httpd.conf. Using default /usr/local/apache/logs/jk-runtime-status
[Wed Nov 12 15:24:46 2008] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive
[Wed Nov 12 15:24:46 2008] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive
[Wed Nov 12 15:24:46 2008] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive
[Wed Nov 12 15:24:46 2008] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive
[Wed Nov 12 15:24:46 2008] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive
[Wed Nov 12 15:24:46 2008] [notice] Apache/2.2.10 (Unix) mod_ssl/2.2.10 OpenSSL/0.9.7a mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_jk/1.2.25 PHP/5.2.6 configured -- resuming normal operations
[Wed Nov 12 15:24:46 2008] [alert] Child 22588 returned a Fatal error... Apache is exiting!
httpd configtest
Syntax OK
ps -ef | grep ^httpd (no result)
Cpanel/Centos

View 4 Replies View Related

Apache 1.3 And PHP4 With Apache 2.2 And PHP5

Jun 1, 2008

I have apache 1.3 and PHP 4.4 installed on my CentOS 4.4

Can I install apache 2.2 and PHP 5.x on the same server? I want to test my scripts for compatibility and also to check the performance.

I dont want to break my current setup because it's a production server.

View 5 Replies View Related

Apache 1 Or Apache 2 , All Else Being Equal

Nov 13, 2008

if you were to be presented with a choice to run Apache 1 or Apache 2 given you'd have more or less the same support requests etc, and the same underlying user requirements to implement either one or the other, which one would you choose and why?

I noticed that Hsphere Parallels control panel 3.2 release as may well other control panels, offers such possibility. Personally I've been educated from senior members of previous organizations to appreciate Apache 1 as the defacto version of the web hosting industry (choice here being apache 1 and 2, not IIS or any other web servers)
Could you kindly simply attempt to enlighten me given, indeed support for both will/might remain the same in the future?

View 5 Replies View Related

Apache :: IIS 7.5 And Apache 2.4.4 Not Working Together

Jun 25, 2013

I am facing while upgrading the current Apache version 2.2.11 to Apache 2.4.4. IIS 7.5 on Windows Web Server 2008 R2 is not redirecting requests to the Apache 2.4.4 which is on Windows Server 2003 R2. I checked the access and error logs of Apache 2.4.4 and there is no entry. The existing 2.2.11 is working completely fine with IIS 7.5. IIS is working as a load balancer in my environment, takes the https requests and forwards that to Apache, then it goes to the App servers. Here, self signed certificate is used between the Load balancer and the Web server.

I have followed exact same configuration as it was used in Apache 2.2.11 but installed it with a different port (444), later changed it to 443 before running Apache 2.4.4 as a service, turning off the Apache 2.2.11 service. And also, my Apache 2.4.4 is working completely fine when I access it through the Web Server level URL (through the server machine name). But it throws me an error 502 when I hit the Load Balancer level URL. Here is the complete error:

"502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy)contacted the upstream content server, it received an invalid response from the content server."

how I can solve the issue? I am stuck with this portion for about 2 weeks now, it's really urgent to get it solved!

My observation that came through lots of trial and error, I believe that this has something to do with Windows registry!! I came to this conclusion as I uninstalled the existing Apache 2.2.11 and installed it back again, it throws me the same error that I am getting for Apache 2.4.4. Then, I matched it with the other web server, found out some differences in the registry created for 2.2.11 and changed in this one accordingly- now 2.2.11 worked fine in this web server.

View 5 Replies View Related

ASP.NET On Apache

Jul 9, 2007

I need to run asp.net on apache does anyone know how i can set this up ....

View 5 Replies View Related

Apache On Just One IP

Jan 4, 2009

I currently have a dedicated server running centOS5 and webmin. With help of folks here

I was able to bind additional IP numbers using webmin.

I have a small problem now. The idea of binding the IPs was so that I could create "true port 80" shoutcast connections on the new IP numbers. However, when I try this I am taken to the control panel home page (home page to that server). The config on the shoutcast server is set properly (using proper IP #) as I have been able to listen to a stream using the new ip number's (higher ports), but not the main IP number.

My questions, I hope, are simple.

1. Am I able to use these additional IP numbers for Shoutcast Port 80 (true port 80 - only one per IP #)?

2. If yes, do I have to make Apache use ONLY my main IP number, thereby releasing the others for Port 80 use? If so, how do I do this.

View 4 Replies View Related

Apache 2.2.14 Vs 1.3.41

Oct 20, 2009

I am trying to decide on upgrading our Apache version from 1.3.41 to 2.2.14.

From what I can tell 2.2 is MUCH faster, but I have seen many reports of 2.* version crashing more frequently than 1.3.

Does anyone have some solid information on the reliability of 1.3.41 vs 2.2.14?

Also, any other items I may love/miss from upgrading?

We are running php4 (default) + 5.

View 14 Replies View Related

Apache 2.2.11 Vs Apache Apache 2.0.63

Jun 22, 2009

i am using 2.0.63 version and already having high load issue becoz of apache so should i have to upgrade to new version 2.2.11 ? is new versin liter as compared 2.0.63 please suggest what should i do know i am running a forum on the server.

View 4 Replies View Related

Apache VPS

Feb 22, 2008

all i have a vps

i have a problem my apache redirect sites in same directory

my apache2.conf OS debian3.1

Code:
<VirtualHost 62.75.152.217:80>
ServerAdmin info@hideyourtracks.org
DocumentRoot /home/hideyourtracks
ServerName hideyourtracks.us
ServerAlias hideyourtracks.us
TransferLog /var/log/hideyourtracks_access.log
ErrorLog /var/log/hideyourtracks_error.log
<Directory "/home/hideyourtracks">
allow from all
Options +Indexes
</Directory>
</VirtualHost>

<VirtualHost 62.75.152.217:80>
ServerAdmin info@nopremium.org
DocumentRoot /home/nopremium
ServerName nopremium.org
ServerAlias nopremium.org
TransferLog /var/log/nopremium.org_access.log
ErrorLog /var/log/nopremium.org_error.log
<Directory "/home/nopremium">
allow from all
Options +Indexes
</Directory>
</VirtualHost>

View 4 Replies View Related

Apache 2.0 Or 2.2

May 5, 2008

Which version is more suitable for shared hosting with cPanel?

View 7 Replies View Related

Apache 1.3.xx Or 2.xx

Jan 10, 2008

configuring servers but have a very big website I want to put a new box I'm building, but am not sure if I should install Apache 1.3.xx or 2.xx. I see a TON of web hosts still use Apache 1.3.xx, but it seems that most books now a days say to install Apache 2.xx.

View 3 Replies View Related

Apache 1.x Vs Apache 2.x Vs Apache 2.2.x

May 21, 2008

what is the best, most secure, and fastest Apache version right now?

I have Apache 1.x installed on my server. I don't know why. I like to always use the newest and most up to date version for my site. I know the 1.x series is still being updated, but what's the difference between 1.x and 2.x and 2.2.x?

I think I may want to use 2.2.x but don't want to use compatibility etc.

My sites only use 301 redirects, modrewrite, and http hosts [url]to [url]-

if I upgrade to 2.2.x, will my sites break?

View 14 Replies View Related

Apache/2.0.63 Or 2.2.10?

Nov 29, 2008

Just took control of a fresh server which has been setup with Apache/2.0.63 with red hat and cpanel. Is there any reason not to use apache 2.2.10? I have a feeling when i question the version they will say its the most stable version they are happy with. What would be the benefits/negatives for the current version?

View 7 Replies View Related

Apache Via SSH

Jul 17, 2008

rebuilding easy apache using SSH?

I'm still stuck with Ioncube problems, got [url]and you'll see what problem im having.

View 2 Replies View Related

What Is Apache Doing

Oct 25, 2008

Is it possible to see what apache's doing in more details than using:

apachtop
mpstat
sar
ps -eo pcpu,pid,user,args | sort -k 1 -r | head -10

Everynow and then I'm seeing one of it's processes climb to 100% CPU and I'd like to know what's behind it?

View 2 Replies View Related

IIS Or Apache

Jan 8, 2008

im starting my first steps 4 web development using Mysql & Php but im confused a little bit about the Web Server Software ive Windows XP & sepported IIS but i dont know what 2use IIS or Apache?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved