Getting the following when trying to install DNN. A similar thing also happened when trying to install WordPress.
Error: Installation of DotNetNuke at http://domain.com/dnn failed. Non-zero exit status returned by script. Output stream: 'Error during MSSQL version checking [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. '. Error stream: 'Error during MSSQL version checking [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. '.
When it happened with WordPress, I tried the install again and it worked the second time. However, with DNN it does not seem to be working after a second try. Yes, the MS SQL server does exist and is ready to provide.
I am working on a new install of PPA, and after installation on the management node Im trying to add the other nodes. Ive tried to add a Apache, Postfix, DNS & DB node, and they all have the same issue. The installation task fails with the following error:
Destination host 'node.domain.com' (#3), IP '192.168.1.*' : The operation can not be completed because the following component is missing or is not running: pleskd (sc_name '', sc_id #45)
(domain and IP are removed here, correct in the original error. The IP is a backchannel IP, and the public IP was properly set in the management node).
I've verified that pleskd was installed and is running on each node:
Code:
24710 ? S 0:00 /usr/local/pem/sbin/pleskd --props-file /usr/local/pem/etc/pleskd.props --send-signal 24712 ? S 0:00 /usr/local/pem/sbin/pleskd --props-file /usr/local/pem/etc/pleskd.props --send-signal 24714 ? S 0:00 /usr/local/pem/sbin/pleskd --props-file /usr/local/pem/etc/pleskd.props --send-signal ...
I've verified that my management node can connect to the nodes in question via 8532:
Code: ]# telnet 192.168.1.* 8352 Trying 192.168.1.*.. Connected to 192.168.1.*. Escape character is '^]'. ^] telnet> quit Connection closed.
So there shouldn't be any firewall or other networking issues.
Having an issue creating a brand in PPA 11.5. After configuring the brand, all tasks complete okay. After opening up the website, i receive the following error:
Bad Gateway: Web server received an invalid response while acting as a gateway or proxy server.
Web Server at branded.name.com
I have tested this on
PPA version 11.5 Update #02 and PPA version 11.5 Update #03
Still not working. In both cases I re-created the brand.
This is a new test install of PPA 11.5.5 with currently 8 nodes: CP, Apache, IIS, MySQL, Mail, 2 BIND, and Webmail. Installation and adding nodes went pretty much without a hitch so I'm testing account creation, subscription settings, etc. but I'm not getting very far. Anytime I try to add a subscription (any subscription) to an account I get the error: "Owner with external ID = '211' does not exist in Plesk database" The actual ID number varies depending on which account I'm trying to add a subscription to, but otherwise it's always the same error. I've tried the built-in default subscriptions, I've tried creating my own...same results either way.
How can I remove all previous web users, even after an uninstall, I am having trouble finishing a new installation, during the wizard because users already exist.
im getting an error when im trying to create a subscription on a windows node via PPA management node, the task error is:
Method name: registerIpPlesk on SCREFleskWebIIS:0 Last execution output: This IP address XXX.XXX.XXX.XXX is already registered in Panel on the network interface Local Area Connection
the IP XXX.XXX.XXX.XXX is the correct service node IIS ip address..
I configured Cloudflare in admin panel, I then logged in using my test customer account, I tried to install CloudFlare application (without license key for free mode) . I got the following error:
Error: Installation of CloudFlare for Parallels Plesk at http://MyLinuxWebsite.cyberhostpro.com/CloudFlare failed. Non-zero exit status returned by script. Output stream: 'PHP Warning: SimpleXMLElement::__construct(): Entity: line 6: parser error : Opening and ending tag mismatch: hr line 5 and body in /usr/local/psa/var/apscache/data-mezJCJ/scripts/configure.php on line 262
All domains were offline this morning. Plesk showed the following error message. It seems we are beta testing the software. I am on Suse 13.1, clean install.
Unable to rotate dump: The dump rotation is failed with code '1' at /usr/local/psa/admin/bin/plesk_agent_manager line 1041.
Warning: domain "abc.com"
The domain 'abc.com' may be inaccessible after backup. Please, resume it manually!
I'm getting the following alert in my Plesk 11.5 panel :
1) Failed to update Panel. To solve this problem, you can send the update log to Parallels support. View the update logs (Oct 27, 2014). View the update logs (Oct 28, 2014). Copy the logs to your computer before you close this message. To close this message, click here.
2) Installation or upgrade failed. For more information, log in as root to the server over SSH and view the file /tmp/plesk_11.5.30_installation.log. To remove this notice, remove the file /var/lock/parallels-panel-upgrade-failure.flag from the server. Repair the failed upgrade or installation. ---------------------------- here the final part of the update log: ---- ===> Cumulative APS controller database (apsc) upgrade has been started. ===> Upgrade of APS controller database has been completed. ===> Cumulative Plesk database upgrade (revertable stage) has been started.
I have only tried to "switch on" the jail item "apache-badbots" and get a red box with:
Unable to switch on the selected jails: f2bmng failed: ERROR No file(s) found for glob /var/www/*/logs/access_log ERROR Failed during configuration: Have not found any log file for apache-badbots jail ERROR:f2bmng:Command '['/usr/bin/fail2ban-client', 'reload']' returned non-zero exit status 255 ERROR:f2bmng:Failed to reload following jails due to errors in configuration .Click to expand...
What could I fix by trying to start mysql server, recieve following errors:
plesk interface:
Code: Failed to restart the "mysql" service. Cannot start/stop/restart service: Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service mysql restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the stop(8) and then start(8) utilities, e.g. stop mysql ; start mysql. The restart(8) utility is also available. start: Job failed to start
from the console:
Code: sudo service mysql start start: Job failed to start
Code: mysql -uadmin -p`cat /etc/psa/.psa.shadow` psa ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) output of plesk_11.5.30_reset_instance_data.log:
I have this big problem, when I try to create a new signature, it returns me this error (ProtDir_IIS :: update () failed: Add Protected Directory failed: columns SiteId, path are not unique (Error code 1)).
We have a little issue with the API, when we want to add an subscription, then we became "Error: Permission denied. (1006)" - but the subscription was added. The status Icon of the Subscription is a "!" and they say (tooltip), that the Plan wasn't correctly synchronized, but we don't use a Plan for this. The Reseller has all rights, there are now limits.
I don't know when we had this problem the first time, but i know that if had worked in Plesk 12 correctly - i think the problem came up with the last 4 - 6 MU.
We actually have Plesk 12.0.18 Update #16 and running it on Debian 6.0.9.
Im trying to get 64bit MYSQL 5.1 installed on a CENTOS 5.2 64bit box. But after a week of wrangling with it I just dont seem to be able to get it running. I have tried both installing via the MYSQL.com RPM's and via a added YUM Repo.
Below is my error log.
Quote:
090522 15:33:04 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 090522 15:33:04 [ERROR] Error message file '/usr/share/mysql/english/errmsg.sys' had only 472 error messages, but it should contain at least 630 error messages. Check that the above file is the right version for this program! /usr/libexec/mysqld: Unknown error 1146 090522 15:33:04 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. InnoDB: The first specified data file ./ibdata1 did not exist: InnoDB: a new database to be created! 090522 15:33:04 InnoDB: Setting file ./ibdata1 size to 10 MB InnoDB: Database physically writes the file full: wait... 090522 15:33:04 InnoDB: Log file ./ib_logfile0 did not exist: new to be created InnoDB: Setting log file ./ib_logfile0 size to 5 MB InnoDB: Database physically writes the file full: wait... 090522 15:33:04 InnoDB: Log file ./ib_logfile1 did not exist: new to be created InnoDB: Setting log file ./ib_logfile1 size to 5 MB InnoDB: Database physically writes the file full: wait... InnoDB: Doublewrite buffer not found: creating new InnoDB: Doublewrite buffer created InnoDB: Creating foreign key constraint system tables InnoDB: Foreign key constraint system tables created 090522 15:33:04 InnoDB: Started; log sequence number 0 0 090522 15:33:04 [ERROR] Aborting
[LOGTEE]: Error Downloading Packages: [LOGTEE]: [LOGTEE]: libuuid-2.17.2-12.18.el6.i686: failure: Packages/libuuid-2.17.2-12.18.el6.i686.rpm from base: [Errno 256] No more mirrors to try.
On a clean install of CentOS 6.6 (Final) I did the following:
1. updated the /etc/hosts file to point my ip to the hostname
2. Open the ports in the iptables file.
3. ran the ppa_installer per the instructions on [URL] ....
The ppa_installer log says installed Successfully. However the following occurs:
1. Cannot browse to the url:8443, or any of the other variations (8080, 8880, https/http)
2. Yum installer is now broken (I replicated this twice). Yum will not run at all with the following error:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/libcurl.so.4: file too short
Please install a package which provides this module, or verify that the module is installed correctly.It's possible that the above module doesn't match the
current version of Python, which is: 2.6.6 (r266:84292, Jan 22 2014, 09:42:36) [GCC 4.4.7 20120313 (Red Hat 4.4.7-4)]
I am now going to try Cent OS 6.4.. will report back.