File System Check
i got this message from my provider after asking for a reboot:
Quote:
Your server had an EXT3 FS error scrolling across the screen.
I rebooted and the server mounted clean, but you may end up needing a file system check (FSCK).
I want to do that myself so i can schedule the downtime after midnight, what are the procedures to fix this erros to avoid the need to reboot the server often
am using CENTOS with cpanel & whm
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
CentOS & Automated File System Check
I have a centos server & whenever I reboot it, it goes into File System check and takes about 1 hr to turn online. The irony is, I reboot the server only when the load goes high (esp when traffic is high).. And the server is down for long times when traffic is high. The server config is pretty good, but it shows these problems once in 15-20 days.
View Replies!
View Related
1and1 File Management System
1and1 file management system Are you familiar with the file management system of oneandone. Doing an ftp upload there is already an index file and many folders on the system and the technical manual has no indication on whether to upload into any of the folders or on the system?. By the way, if you upload into the system interface, your site will not appear online.....
View Replies!
View Related
RedHat's Global File System
Is anyone here running GFS? The responsibility of managing a small cluster of them is about to fall into my lap, and the only documentation I can find is on Wikipedia, which is troubling. I've got the man pages, but I was hoping for more of a document outlining how it works. Why would lock_dlm2 or gfs_scand take up close to 100% CPU with minimal traffic on the machine, for example? What do those do? How can I tune it to not do that? I'm not so much looking for specific answers here about tuning, but am more curious about where I should be looking for documentation. I find it hard to believe that there is none?
View Replies!
View Related
File System Vulnerablity Scanner
Are there any vulnerability scanners that search the local file system for vulnerable apps? I don't need an external scanner. I want to scan all my users home dirs for bad apps - old coppermines, phpbb, etc. I've not been able to find anything like this.
View Replies!
View Related
File Integrity Check
I use tripwire for a long time on my FreeBSD servers one thing that's bugging me is that it takes like 20 minutes to check the system with the default config: so I'd like to know: 1) is there currently some other tool that does tripwire job better? 2) anyone has a list of "probably changed files when a server is hacked", or something like that? I mean, I'll be happy if tests can take 2 minutes instead of 20 and I detect intrusion 99% of the times instead of 99,9% so "key files/dirs" would probably be enough instead of checking a lot of dirs with recursion
View Replies!
View Related
File Integrity Check
Are the following file from Cpanel? Cpanel just update itself (set to automatic update to stable release) and got the following file integrity check. /usr/bin/chattr: FAILED /usr/bin/encode_keychange: FAILED /usr/bin/gdb: FAILED /usr/bin/gdbserver: FAILED /usr/bin/gdbtui: FAILED /usr/bin/lsattr: FAILED /usr/bin/snmpbulkget: FAILED /usr/bin/snmpbulkwalk: FAILED /usr/bin/snmpdelta: FAILED /usr/bin/snmpdf: FAILED /usr/bin/snmpget: FAILED /usr/bin/snmpgetnext: FAILED /usr/bin/snmpinform: FAILED /usr/bin/snmpnetstat: FAILED /usr/bin/snmpset: FAILED /usr/bin/snmpstatus: FAILED /usr/bin/snmptable: FAILED /usr/bin/snmptest: FAILED /usr/bin/snmptranslate: FAILED /usr/bin/snmptrap: FAILED /usr/bin/snmpusm: FAILED /usr/bin/snmpvacm: FAILED /usr/bin/snmpwalk: FAILED /usr/bin/uuidgen: FAILED /usr/bin/wbemexec: FAILED /usr/bin/xmlcatalog: FAILED /usr/bin/xmllint: FAILED /usr/sbin/ext2online: FAILED /usr/sbin/filefrag: FAILED /usr/sbin/mklost+found: FAILED /usr/sbin/snmpd: FAILED /sbin/badblocks: FAILED /sbin/blkid: FAILED /sbin/debugfs: FAILED /sbin/dumpe2fs: FAILED /sbin/e2fsck: FAILED /sbin/e2image: FAILED /sbin/e2label: FAILED /sbin/findfs: FAILED /sbin/fsck: FAILED /sbin/fsck.ext2: FAILED /sbin/fsck.ext3: FAILED /sbin/logsave: FAILED /sbin/mke2fs: FAILED /sbin/mkfs.ext2: FAILED /sbin/mkfs.ext3: FAILED /sbin/resize2fs: FAILED /sbin/tune2fs: FAILED
View Replies!
View Related
What File System For A Massive Disk Array
I am trying to figure out what file system to use for my server. It has 24 hard drives, 2 run the OS in RAID 1, and the other 22 are in RAID 10. When I was installing the OS (Ubuntu 8), I kept on getting problems when I tried to partition and format the second drive (the one with the 22 disks in RAID 10) and it keeps failing on me. I then changed the file system type from ext3 to XFS and it worked fine. I also gave it another try and did not partition/format the second drive and decided to do it manually once the OS was installed. When I did it it told me that the file system was too large for ext3. So my guess is that ext3 has a limit on the size of the file system it is being installed on. Anyway, so I am wondering, is there any other file system that will get me the best performance, mainly I/O performance, that I can install? I would like to stick with Ubuntu OS. This server will mainly serve large files for download over HTTP.
View Replies!
View Related
Issue On Reboot, File System Won't Mount
seeing htis issue: [url] thing is there is no SDC volume. there's SDA, SDA1 and SDA2 reflecting the primary drive in the system. if i put in the root password I can see all the data, everything looks fine. how would i go about fixing this? system just reboots over and over.
View Replies!
View Related
How To Change Permissions Of A Read Only File System
I have a dedicated server and till few days back i was able to edit my files fine but this morning when i am trying to edit any file, it gives me back this error: [user@domainname theme]$ chmod 777 header.php chmod: changing permissions of `header.php': Read-only file system [user@domainname theme]$ [root@domainname theme]$ chmod 777 directoryy chmod: changing permissions of `directoryy': Read-only file system [root@domainname theme]$ I tried both as normal user and root and same results. Do you think the hosting guys changed the permissions of the file system or something?
View Replies!
View Related
Chmod All Occurances Of A File System Wide
How do I sweep my entire server and chmod a particular filename located in the cgi-bin to either 0, 755, etc? For example, to disable a particular perl script running on my system on over 100 accounts in the /cgi-bin/file.cgi I want to chmod the file on every account that it comes up on that /cgi-bin/file.cgi needs to be chmod'd to 0. Anyone know how to do this thru ssh or another method?
View Replies!
View Related
Best Way Of Mouting File System Remotely? NFS/SSHFS
I've been debating this in my head in that we have a number of servers that need to mount a remote server (for backups actually) and debating about the best way of doing it. Traditionally I would use NFS but this is going to have to run over the public internet and NFS is insecure at the best of times. Now I've got root on all the servers and I was thinking of using sshfs via fuse but just wondered if anyone had any input of the stability of it or any other way. R1Soft wouldn't work in this method as the backups are created by the user
View Replies!
View Related
Parser Error Message: Could Not Load File Or Assembly System
I am getting this error for one of my website. This site is working fine on the old server from which it has been migrated: ============================================================= Server Error in '/' Application. -------------------------------------------------------------------------------- Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified. (c:Inetpubvhosts<domain.com>httpdocsweb.config line 59) Source Error: Line 57: <add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/></httpHandlers> Line 58: <httpModules> Line 59: <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> Line 60: </httpModules> Line 61: </system.web> Source File: c:Inetpubvhosts<domain.com>httpdocsweb.config Line: 59 -------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:2.0.50727.3053; ASP.NET Version:2.0.50727.3053 ============================================================= I am attaching the web.config file as attachment. Can anyone tell me how do I fix this.
View Replies!
View Related
WHM Not Listing Account, DNS Etc, Missing Files, File System
I recently had an issue where my box wasnt listing accounts (on logging into WHM for the first time it would, thereafter browsing different functions in WHM it would fail to list any accounts), would not list any zone items when editing DNS zones and in general was acting very strange. I think the tech support chap narrowed it down to zero free inodes on the filesystem (i was even getting errors when editing files with 'vi'). This was increased for the VPS and all issues seemed to be resolved... However named and httpd were not starting after reboots. Again on looking closely named and httpd were missing from /etc/init.d (on CentOS 5.3)! This is very strange and i certainly didnt modify those nor delete such critical files. For a second opinion, is there any cPanel script that can be ran to fix the issues, i am concerned other things have been affected but havent manifested themselves yet (other files deleted etc). Does cPanel update script create the init.d files or is this done by the CentOS operating systems itself? Are these files modified during a cPanel update script? These init.d files for named and httpd have been readded (copied across from another box) and it seems to be ok again, but ideas on howto proceed much appreciated, as i mentioned i dont want any nasty supprises!
View Replies!
View Related
Ddos :: Server Filelimits: Increasing File System Limits Succeeded
floodkoruma is a script which securing our servers from syn floods. But I couldnt understand our connection lost from server on that screen. Last screen is it. last log messages Jul 7 19:41:27 server filelimits: Increasing file system limits succeeded Jul 7 19:42:25 server kernel: printk: 234 messages suppressed. Jul 7 19:42:30 server kernel: printk: 1026977 messages suppressed. Jul 7 19:49:42 server syslogd 1.4.1: restart. Jul 7 19:49:42 server syslog: syslogd startup succeeded as you can see I rebooted from apc server. But before it Jul 7 19:42:30 server kernel: printk: 1026977 messages suppressed.
View Replies!
View Related
How To Check Load Via Ssh And Check Files Causing Load
I would like to know how to check load via ssh and check files causing load? I want the ssh codes for 2 different set of control panels, one with cpanel+whm and other with kloxo+hypervm and I would also know how to check the files causing the load, such as some files could have been interrupted while processing, so they could be causing load some times, so I want to stop such processes if any are running on the vps on my friends accounts
View Replies!
View Related
Ffmpeg :: Cannot Open Shared Object File: No Such File Or Directory In Unknown On Line 0
Rapidly growing error logs showing the same message $ug-non-zts-20020429/ffmpeg.so' - /usr/local/lib/php/extensions/no-debug-non-zts-20020429//usr/local/lib/php/extensions/no-debug-non-zts-20020429/ffmpeg.so: cannot open shared object file: No such file or directory in Unknown on line 0 root@server [~]# ls /usr/local/lib/php/extensions/no-debug-non-zts-20020429 ./ ../ eaccelerator.so* root@server [~]# ls /usr/local/lib/php/extensions/no-debug-non-zts-20020429 ./ ../ eaccelerator.so* Using cpanel 11 / centos 4
View Replies!
View Related
Links Files In Linux (file.txt For File.php)
Today I found some cstomer on the servers make a link for named it file.txt and link it to other customer php file. so that customer have the ability to show the other custoer file content when visiting the url because it is a text wile originally it is a php file. the php file was a config file, so now he know the database password , and because he is in the same server he can use that databse. the question , how to avoide this prolem in the future? notes , the SuExec is rnning and the open_basedir protection is enabled, but the problem still exists.
View Replies!
View Related
Slow System
Recently, my server has been running real slow and I don't know why... I've not noticed any increase in traffic (In fact it goes slow with no traffic on it...), what are some things I can look at to try and diagnose the problem? I know next to nothing about *nix so please speak in great detail. Anytime I restart Apache, it loads quick for a few seconds then gets slow again... Here are the top few processes listed on the process manager: .....
View Replies!
View Related
KVM Over IP System
I have a few different types of servers, all of which came with their own KVMoIP setup, aka DRAC and iLO which have worked only so so since their deployment. The HP iLO has performed absolutely flawlessly but the DRAC on the other hand has been nothing less than a complete nightmare. I'm looking for a KVM over IP system that we can connect to multiple servers, mainly Dell, that is 100% reliable and completely stable. Not something that will be giving Java errors randomly when you actually need it to work. So far I've came across the Raritan Dominion KX II which looks pretty promising. Is there any other KVM over IP systems or manufactures that I should look into? Has anyone used this and can you comment about its reliability?
View Replies!
View Related
System Cleaning
Is there anything like System cleaning in VPS (Linux with apache) ? I need to do system cleaning so that my space and performance can increase. Is there anything like that in Linux?
View Replies!
View Related
System Warning
Ive been getting the following System Warning every hour since I set the server up 5 days ago and Google hasn't been a lot of help in tracking down what it means and if I should be concerned. Im hoping someone here can point me in the right direction. Im running Windows 2003 Web Edition. Quote: Event Type:Warning Event Source:LSASRV Event Category:SPNEGO (Negotiator) Event ID:40960 Date:3/20/2007 Time:7:45:33 PM User:N/A Computer:B02S08MR Description: The Security System detected an authentication error for the server DNS/ns.ufcom.com. The failure code from authentication protocol Kerberos was "There are currently no logon servers available to service the logon request. (0xc000005e)". For more information, see Help and Support Center at [url] Data: 0000: 5e 00 00 c0
View Replies!
View Related
System Logs
I keep receiving hacking attempts from someone accessing my server and running commands like these: Code: hubberfix sh -c cd /tmp;lwp-download [url] shellbot I cannot find any logs with these attempts. Or at least any with info like an IP address or host doing this. Not to sound like a noob, but where can I find logs that would tell me all the commands run on my system? FYI, I'm running Debian Sarge, and I looked in "/var/log" and I can't find much of anything.
View Replies!
View Related
Which Operating System
There's bloody heaps of them. Which one do I go for on my two new file servers? Which operating system out of these is the most common, has the most support, is most compatible? The server will be used to host videos and will run c-panel. A light weight OS is probably preferred but I really have no idea. And incase it helps, the servers have 512mb of ram, about 30 - 40GB of hDD (not actually sure) and an old AMD Duron. CentOS Debian Direct Admin Fedora FreeBSD Gentoo LiveCD Redhat Slackware
View Replies!
View Related
Whole System Backup
I just spent over 10 hours on my node configuration (debian etch). I have installed a lot of stuff, made raid1 array, control panel, some tools, rules etc etc etc. I dont want to see that some day something crash - and I will must start over with everything. What you guys suggest as backup method, maybe some how-to backup WHOLE system with all files, raid configuration etc. I dont need incremental backups at all - I just want to save/backup current system, and maybe restore if something bad would happen.
View Replies!
View Related
Linux System
I am planning to start linux hosting but don't have much knowledge about linux Operating system... can I do this without having sufficient knowledge of linux background? Also please suggest me some good links from where I can get basic linux command and some kind of flash tutorials from which I get to know how to do work in Appache and dns etc. how to download tar file using Terminal,
View Replies!
View Related
Nobody Check
Quote: Nobody Check 1.0.3 Current on cPanel Tue Mar 20 16:00:02 SGT 2007 on blue.mydomain.com Server Load: 16:00:02 up 21 days, 14:02, 0 users, load average: 2.73, 2.20, 2.08 Warning: Malicious Nobody Process Found ========================================= Options: kill bad proc=1 logging lvl=1 SCAN SUMMARY ======================================== Clean Processes: 57 DETECTED Malicious Processes: 1 DETECTION DETAILS ======================================== DETECTION: Process 4221 with name php and path /usr/bin/php Process ID: 4221 has been killed Restuls for PID: 4221 total 0 dr-xr-xr-x 3 easyzz easyzz 0 Mar 20 16:00 . dr-xr-xr-x 291 root root 0 Feb 27 10:01 .. dr-xr-xr-x 2 easyzz easyzz 0 Mar 20 16:00 attr -r-------- 1 easyzz easyzz 0 Mar 20 16:00 auxv -r--r--r-- 1 easyzz easyzz 0 Mar 20 16:00 cmdline lrwxrwxrwx 1 easyzz easyzz 0 Mar 20 16:00 cwd -> /home/easyzz/public_html -r-------- 1 easyzz easyzz 0 Mar 20 16:00 environ lrwxrwxrwx 1 easyzz easyzz 0 Mar 20 16:00 exe -> /usr/bin/php dr-x------ 2 easyzz easyzz 0 Mar 20 16:00 fd -rw-r--r-- 1 easyzz easyzz 0 Mar 20 16:00 loginuid -r-------- 1 easyzz easyzz 0 Mar 20 16:00 maps -rw------- 1 easyzz easyzz 0 Mar 20 16:00 mem -r--r--r-- 1 easyzz easyzz 0 Mar 20 16:00 mounts lrwxrwxrwx 1 easyzz easyzz 0 Mar 20 16:00 root -> / -r--r--r-- 1 easyzz easyzz 0 Mar 20 16:00 stat -r--r--r-- 1 easyzz easyzz 0 Mar 20 16:00 statm -r--r--r-- 1 easyzz easyzz 0 Mar 20 16:00 status dr-xr-xr-x 3 easyzz easyzz 0 Mar 20 16:00 task -r--r--r-- 1 easyzz easyzz 0 Mar 20 16:00 wchan Netstat: Environ: Hello, I got this notification from the 'Nobody Check'. Is there anything I need to be aware of? ..
View Replies!
View Related
System Clock Off Continuously
One of our server's system clock seems to gradually creep away from the correct time. It has been causing us a lot of issues. After one day it becomes more than one hour off. After each minute it becomes a few seconds off. Any ideas what could be causing this? It's uptime is ~2 months so it doesn't happen when it goes offline, it happens while it is running. Right now we have a cronjob running ntpdate every few minutes as even with the ntpd service running it would end up off by several minutes when we would check. I have a feeling this isn't a very reliable fix though.
View Replies!
View Related
Perl System Mail
I am trying to write a perl script, it send's mail to a user i used system(mail -s test) and also send some messages using this. but my issue is i receive mail with html code like <br> and so.. how to get a plain mail using this system command.
View Replies!
View Related
Server Became Read Only System
I had a linux server (CentOs 5, mysql5, php5, directadmin). I had problems with apache few days ago, that's why i hire sys. admin who tweak the system (install the PAE kernel), and some more configurations, and during last 7-8 days server work w/o any downtime (before this server had 1-2 downtimes per day-> OOM killer.) Now i had only ssh access (emails, directadmin access - give "wrong password" answer). As told my sys.admin It became read only system. I cann't even reboot system Quote: [root@server sa]# reboot reboot: /usr/local/lib/libpng12.so.0: no version information available (required by /usr/lib/libcairo.so.2) such few commands work, the most commands that i know don't work Quote: [root@server ~]# ls -la ls: error while loading shared libraries: libacl.so.1: cannot open shared object file: No such file or directory
View Replies!
View Related
HostMonster.com System Loads
I have a shared host with them for a few months which the disk usage for home/backup is usually around 85-95%. Right now I am experiencing very slow download speed. What about yours? Server Load 2.92 (8 cpus) Memory Used 42.6 % Swap Used 0.01 % Disk /dev/sdc1 (/home) 91 % Disk /dev/sdd1 (/backup) 90 % Disk /dev/sde1 (/backup/cpbackup/weekly) 43 % Disk /dev/ram0 (/ramdisk) 24 % Disk /dev/sdb1 (/) 22 %
View Replies!
View Related
System Health Monitoring
I am wondering if anyone knows of any good system monitors for Linux. I will be installing several web and database servers at a branch office and would like to receive stats like system temperature, cpu load, memory usage, etc. Basically something to tell to warn me in the event of a hardware error. I am looking something with an easy-to-use web interface and ability to generate reports.
View Replies!
View Related
VZPP - System Usage
I have a VPS with 512mb guaranteed memory. From VZPP, my Resource Capacity(System Usage)is using >50% even when I don't have any active sites at all! Support staff trying to convince me is normal as apache, cpanel etc are using resources. Yes, I agreed they use up resources. But at >50%? What will happen if I just have an active site, wouldn't it hit 100% and I have to upgrade immediately for more resources? I think is more of nodes or some setup issues then "is normal". What is normal "system usage" for new VPS with no website on it.
View Replies!
View Related
Apache Hogs The System
Getting the following in my log Quote: apache 1994 0.0 0.0 2776 1020 ? S 15:02 0:00 sh -c /usr/bin/identify -format %w###%h###%m###%n###%r###%z "/tmp/php apache 1995 23.3 0.0 0 0 ? D 15:02 1:03 [identify] This is a good case.. normally though it is like this: Quote: apache 2864 0.0 0.0 3064 1020 ? S 15:08 0:00 sh -c /usr/bin/identify -format %w###%h###%m###%n###%r###%z "/tmp/php apache 2865 39.8 0.3 19944 12612 ? D 15:08 0:26 /usr/bin/identify -format %w###%h###%m###%n###%r###%z /tmp/php0SNeMT
View Replies!
View Related
Central Monitoring System
i have some server at a data center but it dont provide any remote reboot port and any BW monitoring and etc.. i have to run my own monitoring system,and i need a bit more info for this. which software is required for this and which hardware base i need?
View Replies!
View Related
Allocate System Ram
I have a VPS acct with Plesk, am peaking out my system ram at 128mb. Host said to allocate ,ore = purchase more. What I would like to do is hunt down where I am using the most of it. I have 8 sites (non that are too big). Most of them are wordpress sites. Would caching help? Not sure where to look to find this out.
View Replies!
View Related
Phone System Checking
I'm thinking to implement a solution for our VOIP system so that automatic calls should be done several times a day and to check that someone is responding or that it's ringing. We are using AsteriskWin32 for now and for our needs it's working great.
View Replies!
View Related
Changing System Date
We have a server located in USA. We have hosted an application for online booking of travel tickets. The customer wanted to change the system date to IST instead of EDT which we did. Now, if we try to change the system date to a future date in order to test our application, the date automatically resets to the current date. This happens only if we have the timezone as IST. If we change the system date to EDT, then after changing the system date, it does not reset automatically. It changes only if we modify it manually. However, if we change the timezone to IST, then the system date resets automatically back to the current date. We have stopped the W32 Time service and also blocked the port 123. We have also disabled the automatic synchronization with the internet time server.
View Replies!
View Related
Setting Up RAID System
I've never loaded Linux onto a RAID array before, I have an Adaptec 2105S card, with 3 x SCSI HDD's attached, in a RAID5 setup. When I boot the Cent OS Server 4.4 CD, it says I don't have any hard drives attached. I am then prompted to select a device driver, but it does not show up in the list. The options in the list are: - Adaptec AACRAID (aacraid) - Adaptec AHA-152x (aha152x) - Adaptec AHA-2740, 28xx, 29xx, 39xx (aic7xxx) - Adaptec Aic79xx SCSI Host Bus Adapter driver (aic79xx) - Adaptec SAS/SATA Host Bus Adapter driver (adp94xx) It says if I have a driver disk, hit F2. The problem is that I don't have a driver disk. The manual tells me to visit [url]for drivers, but it's not offline. When I go to the download section for the card [url]the only *nix option, is SuSE.
View Replies!
View Related
Hosting System Automation
I want to establish free web hosting site/service. Is there any system available that will automate all registrations and stuff? I'm looking for something like layeredpanel.. Maybe theres anything similar but open source?
View Replies!
View Related
|
TRACKER
